Specific hand tools - Page 5

Permanent Paint Marker Pica Classic 524, Blue - 524/41 Pica Classic 524/41 is an industrial paint marker (Lackmarker / Paint Marker) from the Pica Classic line of the German manufacturer Pica-Marker, in blue. It is designed for permanent marking on almost all surfaces. The paint is highly opaque, so the lines are bright, high-contrast and clearly visible. The marker has a round tip and leaves a line 2-4 mm wide. The barrel is white with the "Pica Classic 524" print, while the cap and tip are in the colour of the paint. Durable marking indoors and outdoors According to the manufacturer the paint is extremely lightfast, quick-drying and also suitable for outdoor use. The marking is hard to remove, which makes the marker a good choice wherever a label has to stay legible for a long time. Pica also states that the marker is free of xylene and toluene. Surfaces and trades In its current product sheet Pica lists metal, wood, plastic, glass, paper, tiles, rubber and brick as suitable surfaces. In the earlier sheet for this model the manufacturer recommends it for automotive engineering, glaziers, locksmiths, mechanics, varnishers and woodwork. Colours and packaging Pica Classic 524 is available in six colours: green (524/36), red (524/40), blue (524/41), yellow (524/44), black (524/46) and white (524/52). This page is for the blue marker 524/41. The manufacturer supplies the markers in trade packs of 10 per colour and also offers a display for the Classic line markers (item 66520) for shops. Other Pica Classic markers The paint marker belongs to the industrial marker group of the Pica Classic line. The manufacturer also offers the 520/521 permanent marker, the Instant White 522/532 marker and pen, the 528 XXL permanent marker and the 533/534 permanent pen - each for a different kind of marking. Technical specifications ManufacturerPica-Marker (PICA) Item number524/41 EAN4260056153372 SeriesPica Classic 524 - industrial paint marker ColourBlue TipRound Line width2-4 mm PropertiesHighly opaque paint, extremely lightfast, quick-drying, hard to remove UseIndoors and outdoors CompositionFree of xylene and toluene SurfacesMetal, wood, plastic, glass, paper, tiles, rubber, brick Manufacturer's packaging10 markers per colour Questions and Answers Which surfaces is the marker suitable for? Pica lists metal, wood, plastic, glass, paper, tiles, rubber and brick. The manufacturer describes it as a marker for permanent marking on almost all surfaces. Can it be used outdoors? Yes. According to the manufacturer the marking is extremely lightfast and the marker is also suitable for outdoor use. Is the marking easy to remove? No. Pica describes the marking as hard to remove, so the marker suits labels that have to stay legible for a long time. Do not use it where the marking will need to be wiped off later. How wide is the line? The marker has a round tip. According to the manufacturer the line width is 2 to 4 mm, and the highly opaque paint gives a high-contrast mark. Does the paint dry quickly? Yes. The manufacturer describes the marker as quick-drying and the paint as highly opaque. Does the marker contain xylene or toluene? No. Pica states that the Classic 524 marker is free of xylene and toluene. Which colours does Pica Classic 524 come in? Six colours: green 524/36, red 524/40, blue 524/41, yellow 524/44, black 524/46 and white 524/52. This item is the blue version. ..

Permanent Paint Marker Pica Classic 524, Green - 524/36 Pica Classic 524/36 is an industrial paint marker (Lackmarker / Paint Marker) from the Pica Classic line of the German manufacturer Pica-Marker, in green. It is designed for permanent marking on almost all surfaces. The paint is highly opaque, so the lines are bright, high-contrast and clearly visible. The marker has a round tip and leaves a line 2-4 mm wide. The barrel is white with the "Pica Classic 524" print, while the cap and tip are in the colour of the paint. Durable marking indoors and outdoors According to the manufacturer the paint is extremely lightfast, quick-drying and also suitable for outdoor use. The marking is hard to remove, which makes the marker a good choice wherever a label has to stay legible for a long time. Pica also states that the marker is free of xylene and toluene. Surfaces and trades In its current product sheet Pica lists metal, wood, plastic, glass, paper, tiles, rubber and brick as suitable surfaces. In the earlier sheet for this model the manufacturer recommends it for automotive engineering, glaziers, locksmiths, mechanics, varnishers and woodwork. Colours and packaging Pica Classic 524 is available in six colours: green (524/36), red (524/40), blue (524/41), yellow (524/44), black (524/46) and white (524/52). This page is for the green marker 524/36. The manufacturer supplies the markers in trade packs of 10 per colour and also offers a display for the Classic line markers (item 66520) for shops. Other Pica Classic markers The paint marker belongs to the industrial marker group of the Pica Classic line. The manufacturer also offers the 520/521 permanent marker, the Instant White 522/532 marker and pen, the 528 XXL permanent marker and the 533/534 permanent pen - each for a different kind of marking. Technical specifications ManufacturerPica-Marker (PICA) Item number524/36 SeriesPica Classic 524 - industrial paint marker ColourGreen TipRound Line width2-4 mm PropertiesHighly opaque paint, extremely lightfast, quick-drying, hard to remove UseIndoors and outdoors CompositionFree of xylene and toluene SurfacesMetal, wood, plastic, glass, paper, tiles, rubber, brick Manufacturer's packaging10 markers per colour Questions and Answers Which surfaces is the marker suitable for? Pica lists metal, wood, plastic, glass, paper, tiles, rubber and brick. The manufacturer describes it as a marker for permanent marking on almost all surfaces. Can it be used outdoors? Yes. According to the manufacturer the marking is extremely lightfast and the marker is also suitable for outdoor use. Is the marking easy to remove? No. Pica describes the marking as hard to remove, so the marker suits labels that have to stay legible for a long time. Do not use it where the marking will need to be wiped off later. How wide is the line? The marker has a round tip. According to the manufacturer the line width is 2 to 4 mm, and the highly opaque paint gives a high-contrast mark. Does the paint dry quickly? Yes. The manufacturer describes the marker as quick-drying and the paint as highly opaque. Does the marker contain xylene or toluene? No. Pica states that the Classic 524 marker is free of xylene and toluene. Which colours does Pica Classic 524 come in? Six colours: green 524/36, red 524/40, blue 524/41, yellow 524/44, black 524/46 and white 524/52. This item is the green version. ..

Permanent Paint Marker Pica Classic 524, Red - 524/40 Pica Classic 524/40 is an industrial paint marker (Lackmarker / Paint Marker) from the Pica Classic line of the German manufacturer Pica-Marker, in red. It is designed for permanent marking on almost all surfaces. The paint is highly opaque, so the lines are bright, high-contrast and clearly visible. The marker has a round tip and leaves a line 2-4 mm wide. The barrel is white with the "Pica Classic 524" print, while the cap and tip are in the colour of the paint. Durable marking indoors and outdoors According to the manufacturer the paint is extremely lightfast, quick-drying and also suitable for outdoor use. The marking is hard to remove, which makes the marker a good choice wherever a label has to stay legible for a long time. Pica also states that the marker is free of xylene and toluene. Surfaces and trades In its current product sheet Pica lists metal, wood, plastic, glass, paper, tiles, rubber and brick as suitable surfaces. In the earlier sheet for this model the manufacturer recommends it for automotive engineering, glaziers, locksmiths, mechanics, varnishers and woodwork. Colours and packaging Pica Classic 524 is available in six colours: green (524/36), red (524/40), blue (524/41), yellow (524/44), black (524/46) and white (524/52). This page is for the red marker 524/40. The manufacturer supplies the markers in trade packs of 10 per colour and also offers a display for the Classic line markers (item 66520) for shops. Other Pica Classic markers The paint marker belongs to the industrial marker group of the Pica Classic line. The manufacturer also offers the 520/521 permanent marker, the Instant White 522/532 marker and pen, the 528 XXL permanent marker and the 533/534 permanent pen - each for a different kind of marking. Technical specifications ManufacturerPica-Marker (PICA) Item number524/40 EAN4260056153365 SeriesPica Classic 524 - industrial paint marker ColourRed TipRound Line width2-4 mm PropertiesHighly opaque paint, extremely lightfast, quick-drying, hard to remove UseIndoors and outdoors CompositionFree of xylene and toluene SurfacesMetal, wood, plastic, glass, paper, tiles, rubber, brick Manufacturer's packaging10 markers per colour Questions and Answers Which surfaces is the marker suitable for? Pica lists metal, wood, plastic, glass, paper, tiles, rubber and brick. The manufacturer describes it as a marker for permanent marking on almost all surfaces. Can it be used outdoors? Yes. According to the manufacturer the marking is extremely lightfast and the marker is also suitable for outdoor use. Is the marking easy to remove? No. Pica describes the marking as hard to remove, so the marker suits labels that have to stay legible for a long time. Do not use it where the marking will need to be wiped off later. How wide is the line? The marker has a round tip. According to the manufacturer the line width is 2 to 4 mm, and the highly opaque paint gives a high-contrast mark. Does the paint dry quickly? Yes. The manufacturer describes the marker as quick-drying and the paint as highly opaque. Does the marker contain xylene or toluene? No. Pica states that the Classic 524 marker is free of xylene and toluene. Which colours does Pica Classic 524 come in? Six colours: green 524/36, red 524/40, blue 524/41, yellow 524/44, black 524/46 and white 524/52. This item is the red version. ..

Permanent Paint Marker Pica Classic 524, Yellow - 524/44 Pica Classic 524/44 is an industrial paint marker (Lackmarker / Paint Marker) from the Pica Classic line of the German manufacturer Pica-Marker, in yellow. It is designed for permanent marking on almost all surfaces. The paint is highly opaque, so the lines are bright, high-contrast and clearly visible. The marker has a round tip and leaves a line 2-4 mm wide. The barrel is white with the "Pica Classic 524" print, while the cap and tip are in the colour of the paint. Durable marking indoors and outdoors According to the manufacturer the paint is extremely lightfast, quick-drying and also suitable for outdoor use. The marking is hard to remove, which makes the marker a good choice wherever a label has to stay legible for a long time. Pica also states that the marker is free of xylene and toluene. Surfaces and trades In its current product sheet Pica lists metal, wood, plastic, glass, paper, tiles, rubber and brick as suitable surfaces. In the earlier sheet for this model the manufacturer recommends it for automotive engineering, glaziers, locksmiths, mechanics, varnishers and woodwork. Colours and packaging Pica Classic 524 is available in six colours: green (524/36), red (524/40), blue (524/41), yellow (524/44), black (524/46) and white (524/52). This page is for the yellow marker 524/44. The manufacturer supplies the markers in trade packs of 10 per colour and also offers a display for the Classic line markers (item 66520) for shops. Other Pica Classic markers The paint marker belongs to the industrial marker group of the Pica Classic line. The manufacturer also offers the 520/521 permanent marker, the Instant White 522/532 marker and pen, the 528 XXL permanent marker and the 533/534 permanent pen - each for a different kind of marking. Technical specifications ManufacturerPica-Marker (PICA) Item number524/44 SeriesPica Classic 524 - industrial paint marker ColourYellow TipRound Line width2-4 mm PropertiesHighly opaque paint, extremely lightfast, quick-drying, hard to remove UseIndoors and outdoors CompositionFree of xylene and toluene SurfacesMetal, wood, plastic, glass, paper, tiles, rubber, brick Manufacturer's packaging10 markers per colour Questions and Answers Which surfaces is the marker suitable for? Pica lists metal, wood, plastic, glass, paper, tiles, rubber and brick. The manufacturer describes it as a marker for permanent marking on almost all surfaces. Can it be used outdoors? Yes. According to the manufacturer the marking is extremely lightfast and the marker is also suitable for outdoor use. Is the marking easy to remove? No. Pica describes the marking as hard to remove, so the marker suits labels that have to stay legible for a long time. Do not use it where the marking will need to be wiped off later. How wide is the line? The marker has a round tip. According to the manufacturer the line width is 2 to 4 mm, and the highly opaque paint gives a high-contrast mark. Does the paint dry quickly? Yes. The manufacturer describes the marker as quick-drying and the paint as highly opaque. Does the marker contain xylene or toluene? No. Pica states that the Classic 524 marker is free of xylene and toluene. Which colours does Pica Classic 524 come in? Six colours: green 524/36, red 524/40, blue 524/41, yellow 524/44, black 524/46 and white 524/52. This item is the yellow version. ..

Knipex 90 22 10 BK Pipe CutterDescription: The Knipex 90 22 10 BK pipe cutter is designed for chip-free cutting and offers a comfortable grip. It is intended for cutting plastic drainage pipes and electrical conduits, as well as for trimming sealing sleeves during installation, with a cutting diameter ranging from Ø 20 to 50 mm. The pipe cutter is specially designed for use with plastic pipes with wall thicknesses up to 2.4 mm and soft plastic pipes with foam cores, where the wall thickness can reach up to 3.5 mm. The tool is equipped with a locking mechanism for safe transport and includes two spare blades, ensuring greater durability and a long service life. Technical specifications:Cutting range: ⌀ 20-50 mmWall thickness: 2.4 - 3.5 mmDimensions: 72 x 85 x 44 mmWeight: 0.108 kg..

Pica Powder Refill Pack, 45 g - 2030 Pica Powder Refill Pack 2030 is a refill of green fluorescent powder for the Pica Powder deep hole spray marker (art. 2020). The bottle holds 45 g of powder, and the 3x symbol on the label indicates enough for up to three fillings. According to the manufacturer the refill extends the service life of the marker - completely without propellant gas. No gas - ZERO GAS Pica Powder does not use an aerosol can but a long-life pump mechanism, which the manufacturer labels ZERO GAS. That is why the refill contains no gas either: the powder is simply topped up in the marker. Pica states that the robust pump mechanism makes refilling easy and protects the environment at the same time. How Pica Powder marks The marker makes contactless markings through drill holes up to 250 mm deep. One spray burst leaves a green fluorescent chalk-based dot and, according to the manufacturer, precisely images the whole surface of the drill hole. It suits holes from 3 mm upwards, has a spray arm that swivels 360° for hard-to-reach spots, and effective dust and moisture protection. The manufacturer states up to 1,500 shots and a durable pump mechanism. Marker features Among the key features of the Pica Powder the manufacturer lists the 360° swivel arm, dust and moisture protection, refillability, the gas-free pump mechanism and one-hand operation. The marker comes in a blister and in a retail display, and the Refill Pack is the accessory used to renew the powder. Applications Pica recommends the Powder for woodworking, electrical, plumbing and construction work. The marking adheres to all surfaces - dry, damp, rough and smooth - and is easy to remove from smooth surfaces. According to the manufacturer the quick handling saves time. Surfaces The manufacturer lists brick, wood, metal, plastic, tiles, plasterboard, glass, rubber, wet wood and wet rubber as suitable surfaces. The refill is intended for the Pica Powder marker; the marker itself is not included in this article. Technical specifications ManufacturerPica-Marker (PICA) Article2030 EAN4262357552922 TypePowder refill (Refill Pack) For markerPica Powder - deep hole spray marker (art. 2020) Contents45 g PowderGreen, fluorescent, chalk-based FillingsUp to 3 (3x symbol on the label) Propellant gasNone (ZERO GAS) The Pica Powder markerHoles from 3 mm, up to 250 mm deep, up to 1,500 shots, 360° arm SurfacesBrick, wood, metal, plastic, tiles, plasterboard, glass, rubber, wet wood, wet rubber Questions and Answers Which marker is this refill for? For the Pica Powder deep hole spray marker (art. 2020). The marker itself is not included - the refill is used to top up the powder in it. How much powder does the refill contain? The bottle holds 45 g of green fluorescent powder. The 3x symbol on the label indicates enough for up to three fillings. Does the refill contain gas? No. Pica Powder works with a pump mechanism without aerosol gas (ZERO GAS), so the refill is powder only, without propellant. What colour is the marking? Pica Powder leaves green fluorescent chalk-based markings. According to the manufacturer the marker precisely images the whole surface of the drill hole. Can the marking be removed? Yes, the manufacturer states that the marking is easy to remove from smooth surfaces. It adheres to dry, damp, rough and smooth surfaces. How deep can Pica Powder mark? The marker marks through drill holes up to 250 mm deep and from 3 mm in diameter. Its arm swivels 360° for hard-to-reach spots. How many shots does the marker give? The manufacturer states up to 1,500 shots and a durable pump mechanism. When the powder runs out, the marker is refilled with this Refill Pack. ..

Red and Blue Checking Pencil Pica Classic DOUBLE 559 - 559-10 Pica Classic DOUBLE 559 is a two-colour checking pencil - red and blue in one. The manufacturer describes it as a pencil with a thick lead that releases colour easily and supplies it sharpened on both ends. 559-10 is the item number under which Pica supplies the model in a hangable cardboard box of 10 pencils. Two leads in one pencil One half of the pencil is red and the other is blue, and each end is sharpened separately. This lets you mark in two colours with a single pencil without changing tools. The manufacturer specifies high-quality leads with a large diameter. The pencil is hexagonal, and according to the current product sheet it is 18 cm long. Wood from sustainably managed forests The body is made of easy-to-sharpen wood from sustainably managed forests. For sharpening Pica offers the Jumbo Sharpener 560-12, and for carrying the Pica Pocket holster, which the manufacturer calls ideal for thick wooden pencils of all kinds. Surfaces and applications Pica lists brick, wood, wet wood, metal, plastic, paper and tiles as suitable surfaces. In its earlier product sheet the manufacturer recommends the pencil for building construction, underground engineering, sanitary and supply engineering, tiling and woodwork. Manufacturer's packaging Pica supplies DOUBLE 559 in two kinds of packaging: a hangable cardboard box of 10 pencils (item 559-10) and a display box of 50 pencils (item 559-50). The pencil in both packs is the same. The hangable box is printed "10 Pica Classic DOUBLE 559" and states in three languages that the pencil is red and blue in one and sharpened on both sides. Technical specifications ManufacturerPica-Marker (PICA) Item number559-10 SeriesPica Classic DOUBLE 559 TypeTwo-colour checking pencil Lead coloursRed and blue SharpeningBoth ends LeadsHigh quality, large diameter ShapeHexagonal Length18 cm BodyWood from sustainably managed forests SurfacesBrick, wood, wet wood, metal, plastic, paper, tiles Manufacturer's packagingHangable cardboard box of 10 pencils Accessories (separate)Jumbo Sharpener 560-12, Pica Pocket holster Questions and Answers Which colours does the pencil write? The pencil is red and blue in one - one half has a red lead and the other a blue lead. The manufacturer specifies high-quality leads with a large diameter. Is the pencil sharpened? Yes. The manufacturer states that the pencil is sharpened on both ends - at the red and at the blue lead. Does the pencil mark wet wood? Yes. Pica lists wet wood among the suitable surfaces, together with dry wood, brick, metal, plastic, paper and tiles. How long is the pencil? According to the manufacturer's current product sheet the pencil is 18 cm long and hexagonal. What should I sharpen it with? The body is made of easy-to-sharpen wood. For thick pencils Pica offers the Jumbo Sharpener 560-12, and the Pica Pocket combines a holster and a sharpener. Both accessories are sold separately. What is the difference between items 559-10 and 559-50? The pencil is the same - Pica Classic DOUBLE 559. The difference is the manufacturer's packaging: 559-10 is a hangable cardboard box of 10 pencils and 559-50 is a display box of 50 pencils. What is the body made of? According to the manufacturer the body is made of easy-to-sharpen wood from sustainably managed forests. ..

Red and Blue Checking Pencil Pica Classic DOUBLE 559 - 559-50 Pica Classic DOUBLE 559 is a two-colour checking pencil - red and blue in one. The manufacturer describes it as a pencil with a thick lead that releases colour easily and supplies it sharpened on both ends. 559-50 is the item number under which Pica supplies the model in a display box of 50 pencils. Two leads in one pencil One half of the pencil is red and the other is blue, and each end is sharpened separately. This lets you mark in two colours with a single pencil without changing tools. The manufacturer specifies high-quality leads with a large diameter. The pencil is hexagonal, and according to the current product sheet it is 18 cm long. Wood from sustainably managed forests The body is made of easy-to-sharpen wood from sustainably managed forests. For sharpening Pica offers the Jumbo Sharpener 560-12, and for carrying the Pica Pocket holster, which the manufacturer calls ideal for thick wooden pencils of all kinds. Surfaces and applications Pica lists brick, wood, wet wood, metal, plastic, paper and tiles as suitable surfaces. In its earlier product sheet the manufacturer recommends the pencil for building construction, underground engineering, sanitary and supply engineering, tiling and woodwork. Manufacturer's packaging Pica supplies DOUBLE 559 in two kinds of packaging: a hangable cardboard box of 10 pencils (item 559-10) and a display box of 50 pencils (item 559-50). The pencil in both packs is the same. On the front of the display box the manufacturer recommends the Pica Pocket holster with an integrated blade for thick wooden pencils as an accessory. Technical specifications ManufacturerPica-Marker (PICA) Item number559-50 SeriesPica Classic DOUBLE 559 TypeTwo-colour checking pencil Lead coloursRed and blue SharpeningBoth ends LeadsHigh quality, large diameter ShapeHexagonal Length18 cm BodyWood from sustainably managed forests SurfacesBrick, wood, wet wood, metal, plastic, paper, tiles Manufacturer's packagingDisplay box of 50 pencils Accessories (separate)Jumbo Sharpener 560-12, Pica Pocket holster Questions and Answers Which colours does the pencil write? The pencil is red and blue in one - one half has a red lead and the other a blue lead. The manufacturer specifies high-quality leads with a large diameter. Is the pencil sharpened? Yes. The manufacturer states that the pencil is sharpened on both ends - at the red and at the blue lead. Does the pencil mark wet wood? Yes. Pica lists wet wood among the suitable surfaces, together with dry wood, brick, metal, plastic, paper and tiles. How long is the pencil? According to the manufacturer's current product sheet the pencil is 18 cm long and hexagonal. What should I sharpen it with? The body is made of easy-to-sharpen wood. For thick pencils Pica offers the Jumbo Sharpener 560-12, and the Pica Pocket combines a holster and a sharpener. Both accessories are sold separately. What is the difference between items 559-10 and 559-50? The pencil is the same - Pica Classic DOUBLE 559. The difference is the manufacturer's packaging: 559-10 is a hangable cardboard box of 10 pencils and 559-50 is a display box of 50 pencils. What is the body made of? According to the manufacturer the body is made of easy-to-sharpen wood from sustainably managed forests. ..

Pica BIG Dry Summer-Heat Refill Leads, Yellow and Red, 12 pcs - 6071 Pica 6071 is a box of 12 "Summer-Heat" refill leads for the Pica BIG Dry automatic construction pencil. The leads in the box come in two colours - yellow and red. These are Pica's special summer leads, which according to the manufacturer are stable at temperatures up to 70 °C. Their profile is 2 x 5 mm and their length 150 mm. Summer leads for hot days Pica offers the Summer-Heat leads as a separate type of lead for the BIG Dry: on the pack the manufacturer describes them as stable up to 70 °C and suitable for most surfaces. In the BIG Dry lead range they sit alongside the universal FOR ALL leads, the water-jet-resistant civil engineering leads, the carpenter 2H, the stonemason 10H and the Aniline 2.0 leads for wet wood. For the Pica BIG Dry pencil The leads are for the Pica BIG Dry Longlife Construction Marker (article 6060) - Pica's automatic pencil for carpenters and builders with rectangular 2 x 5 mm leads, 150 mm long. The pencil has a push mechanism for lead feed, a sharpener and dust and moisture protection, and the leads are loaded from behind. Surfaces On the pack Pica states that the Summer-Heat leads are suitable for most surfaces, except glass-smooth and glossy surfaces. Before working on a new material it is a good idea to test the marking on an inconspicuous spot. What is in the box The twelve leads come in Pica's transparent plastic box labelled "12 Ersatz-Minen - Summer-Heat" with article number 6071. The box carries a yellow and a red dot - the colours of the leads inside - and the "Summer-Heat" description is printed in German, English, French and Dutch. Pica's other summer set for BIG Dry, article 6070, also contains graphite leads (4 graphite, 4 red and 4 yellow), whereas 6071 holds only yellow and red leads. Technical specifications ManufacturerPica-Marker (PICA) Article6071 RangePica BIG Dry - Summer-Heat (summer leads) TypeRefill leads ColoursYellow and red Leads per box12 Profile2 x 5 mm Length150 mm Temperature stabilityUp to 70 °C SurfacesMost surfaces, except glass-smooth and glossy ones CompatibilityPica BIG Dry automatic pencil (6060) EAN (from the pack)4262357553615 Questions and Answers Is this a marker or refill leads? These are refill leads, not a marker. The box contains 12 Summer-Heat leads in yellow and red for the Pica BIG Dry automatic pencil. Which pencil are the leads for? For the Pica BIG Dry Longlife Construction Marker (article 6060), which takes rectangular 2 x 5 mm leads, 150 mm long. What does Summer-Heat mean? That is Pica's name for its summer leads. According to the manufacturer they are stable at temperatures up to 70 °C. What colours are the leads? The box holds yellow and red leads, as the colour dots on the pack also show. The manufacturer does not state the exact split between the colours. Which surfaces do they write on? On the pack Pica states that they are for most surfaces, except glass-smooth and glossy surfaces. How do they differ from the 6070 summer leads? The 6070 summer set contains 4 graphite, 4 red and 4 yellow leads. Article 6071 contains only yellow and red leads, also 12 per box. How many leads are in the pack? The pack contains 12 leads, 150 mm long with a 2 x 5 mm profile. ..

Refill Leads for Pica Dry, Water Jet Resistant, White, Ø2.8 mm - 4043 Pica Dry 4043 is a box of 10 white refill leads for the Pica Dry automatic deep hole pencil. The leads belong to the special water jet resistant range: they are permanent and, according to the manufacturer, ideal for wet cutting of tiles and stone. They are 2.8 mm in diameter and 125 mm long. Water jet resistant and permanent The marking withstands water, which makes it suitable for work where the material is cut wet. Pica describes these leads as water-resistant and versatile and states that they are chloride-free. The manufacturer warns to protect the leads from temperatures above 40 °C - this is also printed on the pack itself. Ready to use The leads come already sharpened, in a convenient and sturdy plastic box. To protect the pencil's mechanism, Pica recommends always inserting the refills into the Pica Dry from the rear. Surfaces The manufacturer lists tiles, glass, metal, plastic, brick, wood, leather, rubber and wet rubber as suitable surfaces. Where they work best In its earlier product sheet Pica rates materials with up to three stars. These leads are ideal (3 stars) for stainless steel, stone and concrete, metal, processed wood, plastic, glass, tiles and ceramics. They are suitable (2 stars) for dry and wet rubber and for leather. Variants in the range The water jet resistant special leads for Pica Dry come in boxes of 10 in blue (4041), green (4042) and white (4043), plus the 4040 colour mix with 8 leads - 3 green, 2 white and 3 blue. This page is for the white leads 4043. Other refills for Pica Dry Besides the water jet resistant leads, the manufacturer's comparison table for Pica Dry also lists water-soluble Multi-Use leads with 2B graphite, carpenter leads with H graphite and heat-resistant Summer Heat leads with 2B graphite. The choice depends on the material and on whether the marking has to withstand water. Technical specifications ManufacturerPica-Marker (PICA) Article4043 EAN4260056150579 TypeSpecial refill leads, water jet resistant For pencilPica Dry ColourWhite Quantity10 leads Diameter2.8 mm Length125 mm PropertiesPermanent, water jet resistant, chloride-free, already sharpened Intended useWet cutting of tiles and stone LimitationProtect from temperatures above 40 °C SurfacesTiles, glass, metal, plastic, brick, wood, leather, rubber, wet rubber PackagingPlastic box Questions and Answers Which pencil are these leads for? For the Pica Dry automatic deep hole pencil. The leads are 2.8 mm in diameter and 125 mm long. How many leads are in the pack? The 4043 box contains 10 white leads. The range also includes boxes of 10 in blue (4041) and green (4042), plus the 4040 mix with 8 leads. Do they wash off during wet cutting? No - the leads are permanent and water jet resistant. The manufacturer recommends them precisely for wet cutting of tiles and stone. Is there a temperature limit? Yes. Pica warns to protect the leads from temperatures above 40 °C; the warning is also printed on the pack. Do they need sharpening before use? No, according to the manufacturer the leads come already sharpened, in a sturdy plastic box. How are they inserted into the pencil? Pica recommends always inserting the refills into the pencil from the rear to protect the mechanism. Which surfaces do they mark? The manufacturer lists tiles, glass, metal, plastic, brick, wood, leather, rubber and wet rubber. The leads are chloride-free. ..