Pica BIG Dry Longlife Construction Marker - 6060 Pica BIG Dry 6060 is an automatic construction pencil that the manufacturer presents as "the carpenter's pencil for professionals". It is a hard-wearing, robust marker built for tough demands. Its leads have a rectangular 2 x 5 mm profile and are 150 mm long, and the lead is fed at the push of a button. The pencil comes loaded with a For All 2B universal graphite lead. Push mechanism instead of whittling wood The unique high-tech push mechanism feeds the lead automatically. In its earlier product sheet Pica sums up the advantage like this: no more removing wood to sharpen the pencil - just one push. The leads are easy to exchange and are inserted into the pencil from the rear. Lead sharpener and precise edge guidance The BIG Dry has an integrated lead sharpener for marking with millimetre precision. The rectangular 2 x 5 mm leads allow precise edge guidance when marking and, according to the manufacturer, a very long marking capacity. Pica also lists a hexagon bit holder among the features. Holster with clip and dust and moisture protection The pencil is carried in a quiver-style holster with an extra-strong special clip that allows one-hand operation. The manufacturer states maximum protection against dust and moisture and a long service life thanks to high-quality engineering and refillability. Where it works best With the For All 2B lead the manufacturer rates the pencil ideal (3 stars) for metal, processed wood, dry and wet raw wood, plastic, tiles and ceramics; suitable (2 stars) for stone and concrete; and acceptable (1 star) for rubber, glass and leather. On the current page Pica lists wood, wet wood, metal, plastic, tiles, brick, stone, glass, rubber and wet rubber. Refills for the BIG Dry For different jobs Pica offers For All 2B leads (6030, 6031, 6032, 6045), leads for wet cutting of tiles and stone (6040), carpenter 2H (6050), stonemason 10H (6055), Aniline 2.0 for wet wood (6051) and summer leads up to 70 °C (6071) - all in packs of 12, 150 mm long. Technical specifications ManufacturerPica-Marker (PICA) Article6060 EAN4260056155277 RangePica BIG Dry Longlife Construction Marker (Innovative Line) TypeAutomatic construction pencil Lead profile2 x 5 mm Lead length150 mm Lead fittedFor All, 2B graphite MechanismPush mechanism, automatic lead feed FeaturesIntegrated lead sharpener, hexagon bit holder, dust and moisture protection CarryingQuiver-style holster with extra-strong clip, one-hand operation RefillingLeads are inserted from the rear Ideal for (2B lead)Metal, processed and raw wood (dry and wet), plastic, tiles and ceramics Questions and Answers Which lead does the pencil come with? BIG Dry 6060 comes loaded with a For All 2B universal graphite lead. The leads have a 2 x 5 mm profile and are 150 mm long. Does the pencil need sharpening? Not with a knife. The lead is fed at the push of a button, and the pencil has an integrated lead sharpener for precise marking. Which refill leads are available? For All 2B (6030, 6031, 6032, 6045), wet cutting (6040), carpenter 2H (6050), stonemason 10H (6055), Aniline 2.0 for wet wood (6051) and summer leads up to 70 °C (6071). How is the lead changed? Pica states that the leads are easy to exchange and are inserted into the pencil from the rear. Is it protected against dust and moisture? Yes, the manufacturer states maximum protection against dust and moisture. The pencil is carried in a holster with an extra-strong clip. Which materials does it mark? With the 2B lead the manufacturer rates it ideal for metal, wood (including wet), plastic, tiles and ceramics, and suitable for stone and concrete. What is the hexagon bit holder? Pica lists the hexagon bit holder among the BIG Dry features, noting that it makes the tool more versatile. The manufacturer's data gives no further details about bit sizes. ..

Knipex 95 36 315 A Cable CutterThe Knipex 95 36 315 A is a professional cable cutter with a ratchet mechanism, designed for cutting armored steel-wire cables (SWA). It is suitable for electrical installations, industrial maintenance, and municipal work where a clean and controlled cut is required for larger cables.Key advantagesThe tool features a three-stage high-leverage ratchet drive, which reduces the force required for cutting. The cutting edges are precision-ground and induction-hardened, and the head is made of special high-quality tool steel, forged and oil-hardened for durability.The cutter is VDE-tested and complies with IEC 60900 and DIN EN 60900. The insulated multi-component handles and black-lacquered body contribute to safe and practical operation. The model allows for cutting SWA and multi-strand copper or aluminum cables up to 45 mm in diameter or 380 mm2, for example 4 x 95 mm2.Practical UseWith a length of 315 mm and a weight of approximately 800 g, the tool is convenient even in confined spaces such as distribution panels, cable trays, and junction boxes. The support area allows the tool to be rested on a surface for better stability during operation. The set includes 1 Knipex 95 36 315 A cable cutter with VDE-insulated multi-component handles...

Pica Classic 588 Chalk Holder, for 11-12 mm Chalks - 588-10 Pica Classic 588 is a high-quality chalk holder with a push mechanism, made for chalks 11-12 mm thick. The manufacturer offers it in its Classic Line as an accessory to its marking chalks. The chalk is gripped by a metal collet, and the body is made of sturdy plastic with an ergonomic shape. Ergonomic triangular shape The body has an ergonomically rounded triangular shape. It is made of impact-resistant ABS plastic, and the push button is in classic Pica green - in its product sheet the manufacturer describes it as a button in a signal colour. The black body is printed "Pica Classic 588 Kreidehalter - Crayon holder - Porte-craie". Push mechanism and metal collet The holder works with a push mechanism, and the chalk is held by a metal collet (in its earlier product sheet Pica calls it a metal clamp). In both of its product sheets Pica describes the holder as a high-quality product. Which chalks it takes The holder is for chalks from 11 to 12 mm thick. On the holder's page Pica lists its forester and signing chalks and its luminescent chalks as related products. Before buying, check the thickness of the chalk you use. Chalks in the Pica Classic range In the same chalk section Pica offers soapstone welding chalk (571), blackboard chalk (581), forester and signing chalks (590/591) and luminescent chalk (592). The thickness of each chalk is given in its own description - for the 588 holder it needs to be 11-12 mm. Which trades In its earlier product sheet Pica names the Classic 588 holder for building construction, underground construction and woodwork. Pica's packs Article 588-10 is Pica's designation for the Classic 588 holder with a trade pack of 10. The manufacturer also offers the holder in a hanging self-service blister - article 588/SB. The photo shows the holder itself without a chalk inserted. Technical specifications ManufacturerPica-Marker (PICA) Article588-10 RangePica Classic 588 (Classic Line) TypeChalk holder Suitable chalks11-12 mm thick MechanismPush button GripMetal collet BodyImpact-resistant ABS plastic ShapeErgonomically rounded triangular Button colourGreen (classic Pica green) Manufacturer's trade pack10 pieces (588-10); blister - 588/SB Questions and Answers Which chalks is the holder for? For chalks from 11 to 12 mm thick. The manufacturer gives this thickness in both its old and its new product sheet. Is a chalk included? Pica describes the article as a chalk holder and does not list a chalk in the contents. The photo shows the empty holder. What is the body made of? The body is made of impact-resistant ABS plastic, and the chalk is gripped by a metal collet. What mechanism does the holder have? The holder has a push mechanism. The button is in classic Pica green, which the manufacturer describes as a signal colour. What shape is the body? The manufacturer states an ergonomically rounded triangular shape. The body is black and printed Pica Classic 588. What does 588-10 mean, and is there a blister version? 588-10 is Pica's designation for the Classic 588 holder with a trade pack of 10. The manufacturer also offers the same holder in a hanging self-service blister under article 588/SB. Which chalks does Pica name for the holder? On the holder's page Pica lists the forester and signing chalks and the luminescent chalks as related products. Before buying, make sure the chalk is 11-12 mm thick. ..

Pica BIG Dry Civil Engineering Refill Leads for Wet Cutting, 12 Pieces - 6040 Pica BIG Dry 6040 is a set of 12 refill leads for the Pica BIG Dry automatic construction pencil, which the manufacturer calls Civil Engineering Leads (Tiefbauminen in German). The box holds 4 pink, 4 blue and 4 white leads. They are water jet resistant and permanent and designed for wet cutting of tiles and stone. The cross-section is a rectangular 2 x 5 mm and the length is 150 mm. Water jet resistant The marking from these leads withstands water and stays visible when the material is cut wet. Pica describes them as waterproof and permanent. The manufacturer warns to protect the leads from temperatures above 40 °C - the warning is also printed on the pack itself in several languages. Surfaces The manufacturer lists stone and wet stone, brick and wet brick, metal, wet wood and plastic as suitable surfaces. On its page Pica marks the article as available from the beginning of 2025, so it is a relatively new refill in the BIG Dry range. For the Pica BIG Dry The Pica BIG Dry is a construction pencil with a push mechanism for automatic lead feed, an integrated lead sharpener and maximum dust and moisture protection. The 2 x 5 mm leads allow precise edge guidance when marking. The manufacturer states that the refills are inserted into the pencil from the rear. Other refills for the BIG Dry Besides the wet-cutting leads, Pica offers For All universal leads with 2B graphite (6030, 6031, 6032, 6045), 2H carpenter leads for dry wood (6050), 10H stonemason leads for dry and rough brickwork (6055), the Aniline 2.0 all-weather leads for wet wood (6051) and summer leads stable up to 70 °C (6071) for the BIG Dry. All come in packs of 12, 150 mm long. Technical specifications ManufacturerPica-Marker (PICA) Article6040 EAN4262357550553 TypeCivil Engineering Leads (Tiefbauminen) For pencilPica BIG Dry Quantity12 leads Colours4 pink, 4 blue, 4 white Profile2 x 5 mm Length150 mm PropertiesWater jet resistant, permanent Intended useWet cutting of tiles and stone LimitationProtect from temperatures above 40 °C SurfacesStone, wet stone, brick, wet brick, metal, wet wood, plastic Questions and Answers Which pencil are these leads for? For the Pica BIG Dry automatic construction pencil. The leads have a rectangular 2 x 5 mm profile and are 150 mm long. Which colours are in the set? 12 leads: 4 pink, 4 blue and 4 white. The colours are also marked on the pack. Do they withstand water during wet cutting? Yes. The manufacturer describes them as water jet resistant and permanent and recommends them for wet cutting of tiles and stone. Is there a temperature limit? Yes, Pica warns to protect the leads from temperatures above 40 °C. For hot conditions the manufacturer offers the 6071 summer leads, stable up to 70 °C. Which surfaces do they mark? The manufacturer lists stone and wet stone, brick and wet brick, metal, wet wood and plastic. How are they inserted into the pencil? Pica states that BIG Dry refills are inserted from the rear. The leads have the same 2 x 5 mm profile as the other BIG Dry refills. Which other leads are available for the BIG Dry? For All universal 2B (6030, 6031, 6032, 6045), carpenter 2H (6050), stonemason 10H (6055), Aniline 2.0 for wet wood (6051) and summer leads up to 70 °C (6071) - all in packs of 12. ..

Pica Dry Coloured Caps, 5 pcs - 55801 Pica 55801 is an accessory for the Pica Dry automatic pencil - a set of 5 coloured caps in white, yellow, red, blue and dark green. They let several Pica Dry pencils be told apart by colour - for example by the lead loaded in each - so the right pencil is found quickly. Contents and pack The bag holds one cap of each colour. The manufacturer packs the caps in clear bags with a hanging tab. Pica supplies them to dealers on a clip strip with 10 bags and a metal hook for hanging in the store, while the price here is for one bag of 5 caps. Which pencil they fit Pica presents the caps as an accessory for Pica Dry - the deep-hole automatic pencil (article 3030) that takes 2.8 mm leads. According to the manufacturer the pencil has a Power Lock mechanism for a stronger hold on the lead. Pica Dry can be loaded with different leads: water-soluble Multi-Use 2B, water-jet-resistant special leads, carpenter leads H and summer leads 2B. When pencils with different leads are in use, the coloured cap shows which one is loaded. Coloured leads for Pica Dry Besides graphite, Pica Dry also takes coloured refill leads - for example the 4040 set of water-jet-resistant special leads in blue, white and green, or the single-colour 4041 (blue), 4042 (green) and 4043 (white). The coloured caps do not replace the leads - they only mark the pencil. Technical specifications ManufacturerPica-Marker Article55801 TypeColoured caps for automatic pencil CompatibilityPica Dry (3030) Number of caps5 ColoursWhite, yellow, red, blue, dark green PackClear bag with hanging tab EAN4260056159510 Supply to dealersClip strip with 10 bags and metal hook Questions and Answers Which pencil are the caps for? Pica presents them as an accessory for the Pica Dry automatic pencil, article 3030. How many caps are in the set? The bag holds 5 caps - one each in white, yellow, red, blue and dark green. The price is for one bag. What are the coloured caps for? They let several Pica Dry pencils be told apart by colour, for example by the type of lead loaded. That way the right pencil is found quickly. Which leads are there for Pica Dry? Pica offers water-soluble Multi-Use 2B leads, water-jet-resistant special leads, carpenter leads H and summer leads 2B. The leads are 2.8 mm in diameter. Do they fit Pica Fine Dry or BIG Dry? The manufacturer lists the caps as an accessory for Pica Dry. For Pica Fine Dry, Pica's accessories include a spare eraser rather than coloured caps. How are the caps packed? The caps come in a clear bag with a hanging tab. Pica supplies them to dealers on a clip strip with 10 bags. Are there coloured leads for Pica Dry? Yes, for example the 4040 set of water-jet-resistant special leads in blue, white and green, and the single-colour 4041, 4042 and 4043. The coloured caps do not replace the leads, they only mark the pencil. ..

PICA Fine Dry 7070 Deep Hole Automatic Pencil The PICA Fine Dry is an automatic pencil with a fine Ø 0.9 mm graphite lead, made for precise marking and setting out on site. Unlike the thicker Pica-Dry, this one draws a fine line and allows accurate dimensions on timber, metal, tile and paper - where a broad marker would hide the measurement itself. Why "deep hole" The tip is elongated and exposed, so the pencil reaches the bottom of a drilled hole or a narrow channel and marks inside it. An ordinary pencil cannot: the body meets the edge before the lead reaches the surface. HB hardness and length The lead is HB - the middle grade, dark enough to read and hard enough not to smudge away while the workpiece is carried. The pencil is 160 mm long, which suits a workwear pocket. Automatic feed and contents Lead advance is automatic, by pressing the button at the top - no twisting, no sharpener. Five spare leads are included, so the pencil is ready to work straight away and runs a long time before the first refill. Protective sleeve The pencil stows in a protective sleeve that guards the tip in a pocket or a bag. The tip is slender and without the sleeve it snaps on the first sharp movement. Who it is for Electricians, fitters, carpenters and anyone who marks to a dimension rather than by eye. The graphite is grey, giving a clear line on light surfaces and erasing cleanly from most materials. Technical specifications Article number7070/SB ManufacturerPICA SeriesFine Dry TypeDeep hole automatic pencil Line width0.9 mm Lead hardnessHB Lead colourGrey / graphite Length160 mm Contents5 spare leads FeedAutomatic, push button ProtectionProtective tip sleeve Questions and Answers How does it differ from Pica-Dry? The Fine Dry writes a 0.9 mm line, the Pica-Dry a 2.8 mm one. Fine Dry is for precise setting out; Pica-Dry is for bold marks meant to be seen from a distance. Are spare leads included? Yes, five spare HB leads come with the pencil. Can it mark inside a drilled hole? Yes, that is what it is for. The tip is elongated and exposed and reaches the bottom of the hole. What is the lead hardness? HB, the middle grade. Dark enough to read, and it does not smudge while the workpiece is moved. Is a sharpener needed? No. Lead advance is automatic, via the button at the top. Which surfaces does it write on? Timber, metal, tile, paper and most smooth construction materials. Is the tip protected? Yes, the pencil stows in a protective sleeve. The tip is slender and needs it when carried in a pocket. ..

Pica BIG Ink Smart-Use Marker XL, Black - 170/46 Pica BIG Ink 170/46 is a permanent marker with a deep hole function in black. The manufacturer calls it the Smart-Use Marker XL - a combination of a deep hole marker and a permanent marker in one tool. Its thick tip allows both bold and precise marking on all smooth materials, while the extra-long tip reaches hard-to-reach places. 2-4 mm tip and the Twist&Revive system The line width is 2-4 mm and the marker is 160 mm long. The special tip is soft and sturdy at the same time, which according to Pica gives it a unique writing feel. The double writing tip uses the Twist&Revive system: it can be twisted and reinserted, so the marker quickly revives and lasts longer. XL ink reservoir and side holster The XL ink reservoir gives a longer writing time. The marker sits in a side holster, so it is always at hand, and the manufacturer also lists one-hand operation. Pica advises always closing the marker after use to prevent it from drying out. Ink The red, blue and black variants use a permanent alcohol-based ink which, according to the manufacturer, is immediately water- and abrasion-resistant. This page is for the black marker 170/46. For refilling, Pica sells the Ink Refill Set separately in black, blue and red - a glass bottle with 25 ml of ink and a pipette for precise dosing, enough for 15 fillings and more. BIG Ink or Pica Ink Pica's Innovative Line includes two ink markers for deep holes. Pica Ink is a deep hole marker with a 1.5 mm tip, while the manufacturer describes BIG Ink as a combination of a deep hole marker and a permanent marker - with a thicker 2-4 mm tip for bolder lines. The Ink Refill Set is shared by both markers. Surfaces and colours BIG Ink is intended for all smooth and dry surfaces. The manufacturer lists tiles, glass, plastic, paper, metal, rubber, wood and brick. The range comes in four colours - red (170/40), blue (170/41), black (170/46) and white (170/52) - and blister packs in the same colours are available for retail. Technical specifications ManufacturerPica-Marker (PICA) Article170/46 EAN4260056158025 RangePica BIG Ink Smart-Use Marker XL TypePermanent marker with deep hole function ColourBlack Line width2-4 mm Marker length160 mm InkPermanent, alcohol-based ResistanceWater- and abrasion-resistant immediately FeaturesExtra-long tip, Twist&Revive double tip, XL ink reservoir, side holster, one-hand operation SurfacesSmooth and dry: tiles, glass, plastic, paper, metal, rubber, wood, brick Questions and Answers What is the deep hole function for? The extra-long tip of the BIG Ink marks hard-to-reach places that an ordinary marker cannot reach. The manufacturer describes it as a deep hole marker and a permanent marker in one tool. How wide is the line? The manufacturer states a line width of 2-4 mm. The thick tip allows both bold and precise markings. What ink does the marker use? A permanent alcohol-based ink. According to the manufacturer the marking is water- and abrasion-resistant immediately after application. Can the marker be refilled? Yes. Pica sells the Ink Refill Set separately in black, blue and red: a glass bottle with 25 ml of ink and a pipette, enough for 15 fillings and more. What is Twist&Revive? It is the marker's double writing tip. It can be twisted and reinserted, so the marker quickly revives and lasts longer. Which surfaces does the marker write on? The manufacturer recommends it for all smooth and dry surfaces: tiles, glass, plastic, paper, metal, rubber, wood and brick. To keep it from drying out, always close the marker after use. Which colours does BIG Ink come in? Four colours: red 170/40, blue 170/41, black 170/46 and white 170/52. This item is the black variant 170/46. ..