Keys

The Milwaukee 48227210 aluminum pipe wrench is designed to deliver maximum performance. This 355-millimeter aluminum pipe wrench features a jaw design that provides the largest gripping surface. The double coil springs provide maximum durability and service life, while the ergonomic handle shape is designed for maximum comfort. Hardened jaws provide enhanced grip and durability. Technical specifications: • Length - 254 mm (10") • Weight - 0.680 kg • Material - aluminum..

DeWALT DT7404 Magnetic Socket - 13 mm Brand: DeWALT Model: DT7404 Magnetic socket with a 1/4" shank and a 13 mm insert. Length: 50 mm. Also suitable for impact drivers. ..

STROXX Hex Key Set, Colour-Coded, 9 Pieces, 1.5-10 mm, 100-770 STROXX 100-770 is a set of nine long-arm hex keys in sizes from 1.5 to 10 mm, each in its own colour, with a ball end on the long arm and a plastic holder. EAN 5707436069582. The colour is a function, not decoration The nine keys are powder-coated in different colours, and the size is printed on the holder below each slot. When you are working with fasteners in several sizes - typical on furniture, bicycles, machine covers and aluminium profiles - hunting for the right key disappears. Once learned, a colour is recognised from a distance and with dirty hands, which in practice beats reading a stamped size. The ball end The long arm ends in a ball point. It engages the screw socket at angles up to roughly 25-30° and lets you drive fasteners where the key cannot be brought square - behind a rib, down a recess, close to a wall. The straight end on the short arm stays for final tightening and for breaking a fastener loose: that is where the load peaks and it has to be carried by the full wall of the socket, or the hex rounds out. Long arms These are the long-arm series. The long arm not only reaches further - it is noticeably more comfortable: spinning with the long arm gives the hand a wider sweep, and tightening with the short arm turns the long one into a proper lever. The finish is nickel-plated and powder-coated, a combination that stops rust while holding the colour. The holder The set comes in a plastic holder with a slot for every size and a hanging hole. Keys come out and go back one at a time and stay in size order - the difference between a set that is still complete six months on and a handful of keys loose in the bottom of a bag. Sizes in the set 1.5 mm, 2 mm, 2.5 mm, 3 mm, 4 mm 5 mm, 6 mm, 8 mm, 10 mm Technical specifications ManufacturerSTROXX Article number100-770 EAN5707436069582 TypeHex keys (L-shaped) Pieces9 Sizes1.5 / 2 / 2.5 / 3 / 4 / 5 / 6 / 8 / 10 mm Long armBall end Short armStraight hex Arm lengthLong-arm series FinishNickel-plated, powder-coated Colour codingYes, by size HolderPlastic, slot per size, hanging hole Questions and Answers Which sizes are in the set? Nine metric sizes - 1.5, 2, 2.5, 3, 4, 5, 6, 8 and 10 mm. That is the standard range for furniture and machine fasteners. There are no imperial sizes. What is the ball end for? It lets you drive a fastener at up to roughly 25-30° off the screw axis - behind a rib, down a recess or close to a wall, where the key cannot be brought square. Use it for spinning fasteners in and out, not for final tightening. Which end do I tighten with? The straight hex on the short arm. There the load is carried by the full wall of the socket. Tightening or breaking loose a tight fastener with the ball end puts the load on a small contact patch and rounds the socket out. Why are the keys different colours? The colour codes the size. When you are working across several sizes, the eye picks up a colour far faster than it reads a stamped number - especially in poor light and with dirty hands. The holder also prints the size in figures below each slot. What do the long arms give me? Reach to deeper-set fasteners, and more leverage. Spinning with the long arm gives the hand a wider sweep; tightening with the short arm turns the long arm into a long lever, so the same effort produces more torque. Will they rust? The surface is nickel-plated and powder-coated on top. The nickel stops corrosion and the powder coat holds the colour while adding protection. Even so, dry the keys if they have been stored in a wet bag - the coating protects the steel only while it is intact. Can they be used in a power tool? No. These are hand-held L-keys, not bits. Machine work needs hex bits or sockets with a 1/4" or 1/2" drive, built to take impact loading. ..

Heytec 50720013080 Socket WrenchFeatures: The Heytec 50720013080 ratchet socket wrench is made of high-quality chrome-vanadium steel, ensuring strength and durability. The chrome-plated finish provides additional protection against corrosion. The wrench features a 72-tooth ratchet, allowing for precise work even in confined spaces. It complies with DIN 899 Series A/ISO 1711-1 standards for the ratchet and DIN 899 Series C/ISO 1711 for the open-end wrench. The wrench size is 13 mm, and its length is 178 mm, making it suitable for a variety of applications requiring precision and reliability. The Heytec brand guarantees high-quality workmanship. Technical specifications:Wrench/pliers size: 13 mmLength: 178 mmMaterial: CrV steelCoating: chromeWrench shape: double-endedWrench type: metricWrench profile: 6-point/star ratchetStandard: ISO 3318Weight: 0.098 kg..

Bosch Impact Control Socket 2608522351 Manufacturer: Bosch Model: Bosch Impact Control 2608522351 Description: Impact Control Socket, 1 pc. Socket Technical Specifications: Product Line: PRO Consumables Product Text, Gray Consumables: Socket with permanent magnet Packaging type: Combined cardboard/plastic packaging, transparent packaging, with Euro hole Sales packaging unit: 1 pc. Details Shank: 1/4" Socket size mm: 8 Length mm: 50..