Manufacturer : Milwaukee Model: C12 PPC-0 Warranty: 3 years after registration on the website Description: Powerful mechanism cuts up to 50 mm PVC pipe in 3 seconds. Massive cutting pressure of 175 kg/cm2. REDLINKTM electronics for overload protection in the tool and battery ensure the best quality in the system. Heavy-duty metal gearbox and gears for superior durability and maximum torque. Variable-speed trigger mechanism for a clean cut. Super-sharp blade for smear-free cuts. The high-efficiency mechanism delivers over 200 cuts per charge. Individual monitoring of battery cells optimizes tool runtime and ensures the longevity of the battery pack. On-board fuel gauge and LED light-added user convenience and illumination in low-light conditions. Flexible battery system: works with all MILWAUKEE® M12TM batteries. Comes without batteries and charger! Technical Specifications: Voltage (V): 12 Weight (kg): 1.72 Weight with battery (kg): 1.9 Sound pressure level (dB(A)): 3 Vibration level (m/s2): 1.5 Battery capacity (Ah): Batteries not included Battery type: Lithium-ion Max. cutting capacity (mm): 50 No-load speed (rpm): 0 - 500 Number of batteries required: 0..

Milwaukee Inner-Outer Pipe Deburrer 6-35 mm, 4932493812 Milwaukee article number 4932493812 is a hand reamer for internal and external deburring of pipes from 6 to 35 mm in diameter. It carries 40 hardened and ground cutting edges in an aluminium housing with external ridges for grip. Why deburring is not cosmetic After a pipe is cut - with a cutter, a hacksaw or an angle grinder - a burr is left on the inside and the outside of the cut. Each causes a specific problem. The internal burr restricts the bore, creates turbulence and collects deposits - on a water main that means lost flow, and on a heating system, noise as well. The external burr matters even more: on press and push-fit joints it cuts or rolls the O-ring as the pipe goes in, and that is the classic cause of a leak which appears weeks later. Two functions in one tool The tool works both ways: one end removes the internal burr and forms an inner chamfer, the other dresses the outer edge. On press systems the external chamfer is arguably the more important - it guides the pipe through the seal instead of letting the pipe scrape it. The operation takes seconds and is done by hand, with no tool and no machine. Forty cutting edges The forty hardened and ground edges spread the work and produce an even chamfer rather than a chattered one. The high count has a second consequence: as some edges wear, others keep cutting, which extends the tool's working life. Grinding after hardening is what makes the edges cut rather than smear soft material. Materials The reamer works on plastic, copper, aluminium, steel, iron, brass and stainless steel. That covers practically the whole range found in plumbing and heating - from polypropylene and multilayer pipe through copper to stainless systems for gas and fire suppression. Ridged aluminium housing The housing is aluminium - it survives being dropped on site, unlike plastic reamers. The external ridges have a specific purpose: to let the tool be turned securely with gloves on and with wet or oily hands. In plumbing work that is the normal state of your hands, not the exception. How to use it After cutting, insert the pipe into the appropriate end and turn it a few times under light pressure. Do not force it - the aim is to remove the burr and form a light chamfer, not to thin the pipe wall. Afterwards, wipe the swarf away: left inside the system it blocks aerators, filters and valves just as reliably as any other foreign body. Technical specifications ManufacturerMilwaukee Article number4932493812 TypeHand reamer, internal and external deburring Pipe range6 - 35 mm Cutting edges40, hardened and ground HousingAluminium with external ridges MaterialsPlastic, copper, aluminium, steel, iron, brass, stainless steel OperationBy hand, turning Questions and Answers Why does the burr have to be removed after cutting? The internal burr restricts the bore, creates turbulence and collects deposits. The external burr matters more: on press and push-fit joints it cuts or rolls the O-ring as the pipe is inserted - the classic cause of a leak that shows up weeks later. What diameters does it cover? Pipes from 6 to 35 mm, which covers the great majority of plumbing and heating installations in housing. Which materials does it work on? Plastic, copper, aluminium, steel, iron, brass and stainless steel - from polypropylene and multilayer pipe through copper to stainless systems. Does it deburr inside and outside? The tool does both: one end removes the internal burr and forms an inner chamfer, the other dresses the outer edge. On press systems the external chamfer is the more important - it guides the pipe through the seal. Does it need a machine or a driver? No - the tool is turned by hand. Insert the pipe into the appropriate end and turn it a few times under light pressure. The operation takes seconds. Why is the housing ridged? So it can be turned securely wearing gloves and with wet or oily hands. In plumbing work that is the normal state of your hands. The aluminium housing also survives being dropped on site, unlike plastic reamers. Is there anything to watch out for afterwards? Yes - wipe the swarf off the pipe. Left inside the system it blocks aerators, filters and valves, and finding it after the installation is commissioned is far harder than wiping it off at the time. ..

Milwaukee 48229253 Pipe Cutter, 16-67 mm The Milwaukee 48229253 pipe cutter is suitable for cutting copper pipes with a diameter of 16-67 mm, featuring continuous rotation and designed to produce straighter, cleaner cuts. The 4-roller design ensures precise cuts, with chrome-plated rollers for added durability and extended performance, providing best-in-class rust protection and featuring a smooth adjustment mechanism. The built-in ratchet allows for quick and easy removal of the jaws, and the spare wheel is integrated into the knob...

Milwaukee 48229259 Pipe CutterDescription: The Milwaukee 48229259 pipe cutter is suitable for cutting copper pipes with a diameter of 3-28 mm , featuring continuous rotation and designed for straighter, cleaner cuts. The 4 -roller design ensures precise cuts, with chrome-plated rollers for added durability and extended performance, providing best-in-class rust protection and featuring a smooth adjustment mechanism. The built-in ratchet allows for quick and easy removal of the jaws, and the spare wheel is integrated into the knob...

Milwaukee 4932464172 Pipe CutterDescription: The Milwaukee 4932464172 plastic pipe cutter is an extremely convenient tool with a durable stainless steel blade that ensures longevity and reliability. These shears are equipped with replaceable blades, allowing for easy replacement and extended use of the tool. The ergonomic handle ensures comfort during use, while the quick-release blade mechanism contributes to increased work speed and efficiency. The metal locking mechanism ensures stability and safety during operation. This model of cutter is ideal for cutting PVC, CPVC, PEX, PP, PB, PVDF, and PE pipes with a diameter of up to 42 mm. Technical specifications:Suitable for: PVC, CPVC, PEX, PP, PB, PVDF, PECutting diameter: 42 mmBlade type: replaceableBlade material: stainless steel..

Stanley 0-70-451 Pipe Bending Tool, 6-10 mm DescriptionStanley 0-70-451 is a manual pipe bending tool designed for working with pipes from 6 to 10 mm in diameter. It is suitable for installation, maintenance and repair applications where controlled and accurate pipe bending is required. The tool allows pipes to be shaped with greater control, helping achieve consistent bends while reducing the risk of unwanted deformation. Its manual design makes it practical for use on site, in workshops and for general installation work. Its compact construction makes it convenient to carry and use where a dedicated hand-operated pipe bending solution is required. Technical Specifications Brand: Stanley Type: Manual Pipe Bending Tool Pipe Diameter: 6-10 mm Operation: Manual Application: Pipe bending Suitable for: Installation, maintenance and repair work Pack Quantity: 1 pc. Package Includes 1 x Stanley 0-70-451 Pipe Bending Tool, 6-10 mm ..

The 42 mm copper pipe cutter is designed for precise, clean cuts with continuous adjustment. The four rollers ensure precise cutting and prevent material deformation; there is a spare blade in the wheel. The chrome-plated rollers provide protective support and shield the hand, extending the service life. Integrated cleaning tool...

Milwaukee PVC Pipe Cutter, Up to 25 mm, 4932479407DescriptionThe Milwaukee 4932479407 is a PVC pipe cutter designed for fast, clean, and precise cutting of PVC, PEX, PE, and other plastic pipes up to 25 mm in diameter. It is ideal for plumbing, heating, and installation work where smooth, accurate cuts are essential. The high-quality stainless steel blade delivers clean cuts and long service life, while the ergonomic handles provide a secure grip and comfortable operation. Its compact design makes it easy to use even in confined spaces. The Milwaukee 4932479407 is an excellent choice for plumbers, installers, and maintenance professionals looking for a reliable plastic pipe cutting tool.Technical Specifications Brand: Milwaukee Type: PVC pipe cutter Maximum cutting capacity: 25 mm Blade material: Stainless steel Suitable materials: PVC, PEX, PE, and other plastic pipes Handles: Ergonomic Application: Plumbing, installation, and maintenance Package Includes 1 x Milwaukee PVC Pipe Cutter..