Bosch Claw Hammer 1600A03AK6, 20 oz / 567 g The Bosch 1600A03AK6 is a curved claw hammer with a carbon steel head weighing 0.57 kg (the head itself is marked 20 oz / 567 g) and an overall length of 333 mm. The complete tool weighs 0.836 kg and the head hardness is HRC 50-58. The tool is built to the ISO 15601 standard. Fibreglass-cored handle The handle has a fibreglass core - a material with a 65% fibreglass ratio according to the manufacturer. Fibreglass absorbs much of the vibration that a wooden or one-piece steel handle sends back into the wrist, and it does not shrink and loosen the way wood does. Over it sits a multi-component grip that holds in a sweaty or oily hand. At the end there is a tether hole - on scaffolding or a roof the hammer is clipped on and will not fall. The head The striking face is large, and that is safety rather than styling: more area means less chance of catching the edge of the face and sending the nail sideways. The other side carries the V-shaped claw with a curved profile. The curve is the geometry that turns the swing into a lever: once the claw has taken the nail head, rolling the hammer draws the nail out instead of bending it. A hardness of HRC 50-58 is the range in which the face does not dent and the claw does not snap under load. Applications Driving and pulling nails in formwork, scaffolding, timber framing, sheathing and stripping out. Twenty ounces is the most commonly preferred weight for everyday carpentry - enough for a 90 mm nail in a few blows, but not so heavy that the arm tires within the hour. Technical specifications Part number1600A03AK6 EAN4059952737164 Typeclaw hammer, curved claw Head weight0.57 kg (20 oz / 567 g) Total weight0.836 kg Overall length333 mm Height35 mm Width138 mm Head materialcarbon steel HardnessHRC 50-58 Handlemulti-component Fibreglass ratio65% Tether holeyes StandardISO 15601 Packaging typepaper / cardboard / corrugated board, hanger packaging with Euro hole Pack quantity1 pc ManufacturerBosch Professional Questions and Answers How heavy is the hammer? The head weighs 0.57 kg and is marked on the head itself as 20 oz / 567 g. The complete tool with the handle weighs 0.836 kg. Bosch's catalogue name rounds the head weight to 570 g. What is the handle made of? The handle has a fibreglass core - the manufacturer states a 65 per cent ratio - with a multi-component grip over it. Fibreglass absorbs vibration and does not shrink loose the way a wooden handle does. What is the difference between a curved and a straight claw? A curved claw, as here, is the geometry for pulling nails: rolling the hammer acts as a lever and draws the nail out. A straight claw is more for splitting and prising boards apart when stripping out. What is the hole at the end of the handle for? It is a tether hole. On scaffolding, a roof or a platform the hammer is clipped to a lanyard so that it does not fall if dropped - a standard requirement on many sites. How hard is the head? Bosch states HRC 50-58. The range is chosen so that the striking face does not dent while the claw does not snap when drawing a firmly driven nail. Is it suitable for breaking concrete? No. This is a carpenter's nail hammer. For breaking out and for striking a chisel, use a club hammer with a heavier, more massive head built for that load. Which standard is it built to? The manufacturer names ISO 15601 - the standard that sets the shape, weight and requirements for claw hammers. ..

Stanley FATMAX Demolition Hammer FMHT51367-2, 624 gDescriptionThe Stanley FATMAX FMHT51367-2 is a professional demolition hammer designed for construction, demolition, and heavy-duty renovation work. Its one-piece steel construction provides exceptional strength, durability, and long service life under demanding working conditions. Featuring a 624 g hammer head, a large striking face, and an extended handle, it delivers increased striking force while maintaining excellent control. The design also allows efficient nail pulling, including angled nails, making it a versatile tool for demolition and dismantling applications. The ergonomic non-slip grip ensures comfortable handling and secure control during prolonged use, making the Stanley FATMAX FMHT51367-2 an excellent choice for professional tradespeople.Technical Specifications Brand: Stanley FATMAX Model: FMHT51367-2 Type: Demolition hammer Head weight: 624 g Construction: One-piece hardened steel Striking face: Large Handle: Extended ergonomic non-slip grip Applications: Demolition Breaking Nail pulling Construction and renovation work Package Includes 1 pc. Stanley FATMAX FMHT51367-2 Demolition Hammer..

Bosch Professional Club Hammer 1000 g, 1 600 A03 AK9 The Bosch 1 600 A03 AK9 club hammer has a 1000 g head on a short handle, 260 mm overall. Bosch describes it as a tool for robust work with hand chisels: the short lever and the heavy head put the energy straight into the chisel rather than into the swing. The complete tool weighs 1.215 kg. Head and standard The head is carbon steel at HRC 50-58 with two flat striking faces. The hammer is built to DIN 6475 / ISO 15601, the standards for this type of short, heavy hammer, which fix the shape, the weight and the way the head is secured. Fibreglass-core handle On a tool used for the heaviest blows the handle is the most loaded part. This one has a fibreglass core at 65% content - it will not snap and it absorbs shock and vibration, which spares the wrist and elbow. A multi-component soft-grip handle is moulded over it. A tether hole at the end of the handle allows the tool to be secured when working at height. Dimensions Head height 40 mm, width 95 mm, overall length 260 mm. The short handle is what defines a club hammer - it is held close to the head and worked with short, controlled blows rather than the wide swing of a long-handled hammer. Applications Breaking masonry and render with a chisel, removing tiles, driving wedges, stakes and plugs, formwork assembly, demolition work. It is almost always used together with a hand chisel - flat, pointed or a jointing chisel. Do not strike hardened surfaces with it and do not use it as an anvil.Technical specifications BrandBosch Professional Part number1600 A03 AK9 EAN4059952737195 TypeClub hammer Head weight1000 g (1.00 kg) Total weight1.215 kg Length260 mm Height40 mm Width95 mm Head materialCarbon steel HardnessHRC 50-58 HandleMulti-component, fibreglass core Fibreglass ratio65% Tether holeYes StandardDIN 6475 / ISO 15601 Pack quantity1 pc PackagingCardboard packaging, hanger, with Euro hole Questions and Answers What is a club hammer and how does it differ from an ordinary hammer? A club hammer is a short hammer with a heavy head - 1000 g here, on a 260 mm overall length. It is held close to the head and worked with short blows. An ordinary engineer's hammer has a lighter head and a longer handle and is used for different work. What does the head weigh, and the whole tool? The head is 1000 g. The complete tool with the handle weighs 1.215 kg, according to Bosch. Is it suitable for use with a chisel? Yes - that is its main purpose. Bosch offers it specifically for robust work with hand chisels: flat, pointed and jointing chisels. What is the handle made of? The core is fibreglass at 65% content, with a multi-component soft-grip handle moulded over it. This construction absorbs the blow and will not snap the way a wooden handle can. Which standard is it built to? DIN 6475 / ISO 15601, the standards for this type of short heavy hammer. The head is carbon steel at HRC 50-58. Can it be tethered when working at height? Yes. There is a tether hole at the end of the handle for a lanyard. Can it be struck against another hammer or against hardened steel? No. A blow between two hardened surfaces can chip metal off. A club hammer is used on a chisel with a properly dressed head, or on a timber or plastic component. ..

Dewalt DWHT56028-0 Demolition Hammer, 3.6 kgThe Dewalt® DWHT56028-0 demolition hammer features a tapered head that precisely transfers force and enables clean and efficient demolition. It has a double-sided head-one side is smooth, the other has grooves for better chiseling. This tool can be used to remove bathroom tiles or for other concrete and masonry work. Its carbon fiber handle makes this hammer lightweight while allowing for a balanced swing. The EXOCORE tubular handle enables a light and balanced swing, and the ergonomic grip is designed for a secure and comfortable hold during use...

DeWALT DWHT51002-0 HammerDescription: The DeWALT DWHT51002-0 steel hammer is a versatile hammer suitable for carpentry and finishing work in construction. It features a one-piece steel construction with a thick, heat-treated steel shaft and a 16 oz. weight. The extended claws are ideal for easy nail pulling. With an innovative and compact design, it offers smooth, controlled rotation, while the adaptive side tool for pulling nails helps you quickly remove framing nails, finishing nails, and staples. The magnetic tip allows for quick one-handed nail setting. The handle is extremely comfortable, with an improved shape for better, non-slip grip. Technical Specifications:Model: DWHT51002-0Material: steelApplication: furniture, finishing workLength: 16 oz.Weight: 454 g..

DeWALT DWHT51009-0 Formwork HammerFeatures: The DeWALT DWHT51009-0 Formwork Hammer is a reliable tool weighing 570 g, made of extremely durable steel. The ergonomic handle ensures a secure grip and comfort during use. The hammer is specially designed with a goat's foot, making it ideal for removing small nails from visible surfaces, ensuring convenience and efficiency in work. Technical specifications:Material: steelLength: 350 mmWeight: 0.57 kg..

DeWALT DWHT51389-0 Masonry HammerFeatures: The DeWALT DWHT51389-0 masonry hammer weighs 567 g and features an ergonomic handle that ensures a comfortable grip and control during use. It is made of durable carbon alloy steel, which ensures durability and reliability during operation. The hammer's blade is exceptionally wide, making it suitable for cleaner and more precise cuts in bricks and masonry. This tool is ideal for professional masons and construction workers who seek reliability and efficiency in their work. Technical specifications:Length: 280 mmMaterial: carbon alloy steelHammer weight: 570 gTotal weight: 0.9 kg..

Dewalt DWHT51388-0 Masonry Hammer, 1.36 kg. The Dewalt DWHT51388-0 steel hammer is forged from a single piece of steel. It can easily withstand some of the toughest work environments thanks to its durable steel construction. Ideal for various demolition projects. Specially shaped striking face for better transfer of impact energy. The hammer features an ergonomic handle for more comfortable use. Technical specifications:Brand: DeWALTMaterial: Steel;Application: for stone;Head weight: 1.360 kg;Length: 269 mm;Diameter: 41 mm;Quantity per package: 1 pc.;Dimensions (LxWxH): 265 x 50 x 105 mm;Total weight: 1.675 kg...

Einhell 49445726 Nail HammerDescription: The Einhell 49445726 Nail Hammer is a sturdy and reliable tool suitable for daily use in construction and carpentry. It features a 450 g (16 oz) head made of reinforced and polished metal, which delivers a powerful blow and allows for easy removal of nails, including those without heads. The handle is made of high-quality hickory wood, known for its durability, excellent grip, and ability to absorb vibrations. This ensures comfort, control, and safety during use, even with prolonged use. The hammer is suitable for a variety of applications-from rough construction to precision woodworking tasks. Technical specifications:Weight: 450 g (16 oz)Handle material: Solid hickory woodHead: Reinforced and polishedIntended use: construction and carpentry..

Bosch Professional Engineer's Hammer 300 g, 1600 A03 B6C The Bosch 1600 A03 B6C engineer's hammer has a 300 g head and an overall length of 300 mm. It is the classic fitter's shape - flat striking face and a wedge peen - intended for driving fasteners, working with chisels and punches and straightening sheet metal. The complete tool weighs 0.500 kg. Head and standard The head is carbon steel hardened to HRC 50-58 - hard enough that the striking face does not deform, tough enough that it does not chip. The hammer is built to DIN 1041, the German standard for engineer's hammers, which fixes the shape, the head weight and the way the head is secured to the handle. Fibreglass-core handle The handle has a fibreglass core - it will not snap and it absorbs shock and vibration, which reduces the load on the wrist and elbow over a long working day. A multi-component soft-grip handle is moulded over the core and keeps its grip with oily hands. The fibreglass content is 65%. A tether hole is formed at the end of the handle, so the hammer can be attached with a lanyard when working at height. Dimensions Head height 26 mm, width 105 mm, overall length 300 mm. The ratio between head weight and handle length decides how hard the tool strikes: the 300 g version is lighter and more precise, while a heavier head delivers more energy for the same swing. Applications Fitting and metalwork, driving and removing pins and bearings, working with cold chisels, punches and centre punches, nailing into timber and light concrete work. It is not intended for striking hardened surfaces, nor for use on steel-headed chisels without a suitable guard.Technical specifications BrandBosch Professional Part number1600 A03 B6C EAN4059952741802 TypeEngineer's hammer Head weight300 g (0.30 kg) Total weight0.500 kg Length300 mm Height26 mm Width105 mm Head materialCarbon steel HardnessHRC 50-58 HandleMulti-component, fibreglass core Fibreglass ratio65% Tether holeYes StandardDIN 1041 Pack quantity1 pc PackagingCardboard packaging, hanger, with Euro hole Questions and Answers What is the head weight of this hammer? The head is 300 g (0.30 kg). The complete tool with the handle weighs 0.500 kg and is 300 mm long overall. What is the difference between the 300 g and 500 g versions? Bosch lists both under part numbers 1 600 A03 B6C (300 g) and 1 600 A03 B6D (500 g). The lighter one is more precise and suits fine fitting work; the heavier one delivers more energy for the same swing. What is the handle made of? The handle has a fibreglass core - 65% fibreglass content - with a multi-component soft-grip handle moulded over it. Fibreglass absorbs shock and does not snap the way a wooden handle can. Can the hammer be secured when working at height? Yes. There is a tether hole at the end of the handle for a lanyard. That is the standard requirement for work on scaffolding and roofs. Which standard is it built to? DIN 1041, the German standard for engineer's hammers, which fixes head shape, weight and the fixing to the handle. Head hardness is HRC 50-58. Is it suitable for use with chisels and punches? Yes, that is the typical job for an engineer's hammer of this mass. The HRC 50-58 hardness is chosen so the striking face neither deforms nor chips. Can it be used on hardened steel? No. Striking hardened surfaces - the head of a hardened bolt, or an anvil - can chip material off the striking face. Use a soft-faced hammer or a suitable intermediate piece for that. ..

Bosch Professional Engineer's Hammer 500 g, 1600 A03 B6D The Bosch 1600 A03 B6D engineer's hammer has a 500 g head and an overall length of 322 mm. It is the classic fitter's shape - flat striking face and a wedge peen - intended for driving fasteners, working with chisels and punches and straightening sheet metal. The complete tool weighs 0.738 kg. Head and standard The head is carbon steel hardened to HRC 50-58 - hard enough that the striking face does not deform, tough enough that it does not chip. The hammer is built to DIN 1041, the German standard for engineer's hammers, which fixes the shape, the head weight and the way the head is secured to the handle. Fibreglass-core handle The handle has a fibreglass core - it will not snap and it absorbs shock and vibration, which reduces the load on the wrist and elbow over a long working day. A multi-component soft-grip handle is moulded over the core and keeps its grip with oily hands. The fibreglass content is 65%. A tether hole is formed at the end of the handle, so the hammer can be attached with a lanyard when working at height. Dimensions Head height 27 mm, width 118 mm, overall length 322 mm. The ratio between head weight and handle length decides how hard the tool strikes: the 500 g version is lighter and more precise, while a heavier head delivers more energy for the same swing. Applications Fitting and metalwork, driving and removing pins and bearings, working with cold chisels, punches and centre punches, nailing into timber and light concrete work. It is not intended for striking hardened surfaces, nor for use on steel-headed chisels without a suitable guard.Technical specifications BrandBosch Professional Part number1600 A03 B6D EAN4059952741819 TypeEngineer's hammer Head weight500 g (0.50 kg) Total weight0.738 kg Length322 mm Height27 mm Width118 mm Head materialCarbon steel HardnessHRC 50-58 HandleMulti-component, fibreglass core Fibreglass ratio65% Tether holeYes StandardDIN 1041 Pack quantity1 pc PackagingCardboard packaging, hanger, with Euro hole Questions and Answers What is the head weight of this hammer? The head is 500 g (0.50 kg). The complete tool with the handle weighs 0.738 kg and is 322 mm long overall. What is the difference between the 300 g and 500 g versions? Bosch lists both under part numbers 1 600 A03 B6C (300 g) and 1 600 A03 B6D (500 g). The lighter one is more precise and suits fine fitting work; the heavier one delivers more energy for the same swing. What is the handle made of? The handle has a fibreglass core - 65% fibreglass content - with a multi-component soft-grip handle moulded over it. Fibreglass absorbs shock and does not snap the way a wooden handle can. Can the hammer be secured when working at height? Yes. There is a tether hole at the end of the handle for a lanyard. That is the standard requirement for work on scaffolding and roofs. Which standard is it built to? DIN 1041, the German standard for engineer's hammers, which fixes head shape, weight and the fixing to the handle. Head hardness is HRC 50-58. Is it suitable for use with chisels and punches? Yes, that is the typical job for an engineer's hammer of this mass. The HRC 50-58 hardness is chosen so the striking face neither deforms nor chips. Can it be used on hardened steel? No. Striking hardened surfaces - the head of a hardened bolt, or an anvil - can chip material off the striking face. Use a soft-faced hammer or a suitable intermediate piece for that. ..

STANLEY STHT0-51311 Fiberglass HammerDescription: The STANLEY STHT0-51311 formwork hammer is designed with attention to detail to meet the needs of professional users. Weighing 600 grams, it is lightweight and comfortable, while offering solid power. The polished, serrated head and specially magnetized nail hole provide excellent grip and precision during use. The fiberglass handle features an innovative vibration-damping system that reduces fatigue and discomfort during prolonged use. The connection between the head and the handle is reinforced with a specially developed two-component epoxy resin adhesive, which ensures the tool's durability and resistance to stress during use. This Stanley formwork hammer is the preferred choice among professionals who value quality, reliability, and efficiency in their work. Technical specifications:Hammer weight: 600 gHandle material: fiberglassTotal weight: 0.850 kg..

DeWALT DWHT51003-0 Framing Hammer, 450 g (16 oz)DescriptionThe DeWALT DWHT51003-0 is a professional framing hammer with a 450 g (16 oz) head, designed for framing, carpentry, construction, and general jobsite applications. Its straight claw design provides excellent control for driving nails and efficient nail removal. Manufactured from a single piece of forged steel, the hammer delivers outstanding strength, durability, and long service life under demanding working conditions. The ergonomic non-slip grip enhances comfort and control, while the straight claw is ideal for demolition work and removing embedded nails. The DeWALT DWHT51003-0 is an excellent choice for professional carpenters, framers, contractors, and tradespeople who require a durable, well-balanced hammer for everyday use.Technical Specifications Brand: DeWALT Model: DWHT51003-0 Type: Framing hammer Head weight: 450 g (16 oz) Construction: One-piece forged steel Claw type: Straight claw Handle: Ergonomic non-slip grip Application: Framing, carpentry, construction, and demolition work Package Includes 1 x DeWALT DWHT51003-0 Framing Hammer..

Stanley STHT0-51906 200 g DIN Fiberglass HammerDescriptionStanley STHT0-51906 is a 200 g DIN / locksmith's hammer designed for a variety of metalworking, assembly and general workshop applications. It features a forged high-carbon steel head and a durable fiberglass handle, providing a combination of strength, control and reduced vibration. The 200 g steel head features a smooth, square striking face. The connection between the head and handle is reinforced with a two-component epoxy adhesive, helping provide a strong and durable assembly during regular use. The fiberglass-core handle provides increased strength and durability while helping to reduce vibration. Its ergonomic bi-material grip features a ribbed surface and flared end for improved comfort, secure handling and reduced slippage. The hammer is optimally balanced to improve striking momentum while helping reduce fatigue during repetitive use. It features a 268 mm handle and an overall tool length of 285 mm.Technical Specifications Brand: Stanley Model: STHT0-51906 Type: DIN / Locksmith's Hammer Head Weight: 200 g / 7 oz Head Material: Steel Head Construction: Forged High-Carbon Steel Face Shape: Square Face Finish: Smooth Handle Material: Fiberglass Grip: Ergonomic Bi-Material Handle Length: 268 mm Overall Length: 285 mm Dimensions: 285 x 95 x 20 mm Net Weight: 0.357 kg Pack Quantity: 1 pc. Package Includes 1 x Stanley STHT0-51906 200 g DIN Fiberglass Hammer..

Halder HA3117040 HammerDescription: The Halder HA3117040 aluminum-bodied hammer is a high-quality tool with fully replaceable components, ensuring a long service life. Its wooden handle with an aluminum body ensures lightness and reduced fatigue during use. The soft tips make it suitable for furniture projects and other materials that are at risk of damage from a hammer. Technical Specifications:Handle material: WoodBody material: AluminumWeight: 0.350 kg..

• Special magnetized head for holding nails • Handle: steel profile tube with a rubberized coating • Hammer head attached to the handle under 5 tons of pressure • Complies with DIN 7239Weight: 0.600 kg..