Bosch PRO V-Groove Router Bit, 90°, Ø16 mm, 8 mm Shank, 2608628407 Bosch 2608628407 is a V-groove router bit from the PRO range with a 90° angle, 16 mm diameter, 15.7 mm working length and a cylindrical 8 mm shank. The cutting edges are tungsten carbide (HW) and maximum speed is 35,000 rpm. What a V-groove bit does The bit cuts a groove with a V-shaped section - two sloping walls meeting at a sharp angle. At 90°, each wall sits at 45° to the surface. That profile is used for: Decorative grooves in panels and cabinet fronts - a row of parallel V-lines creating relief. Engraving lettering - a V-bit gives a line whose width varies with depth, which is what produces the characteristic carved typeface. Folding at 90° - a V-groove cut into the back of a panel lets it fold to an exact right angle and be glued into a box or corner. Carbide cutting edges The edges are tungsten carbide (HW). In routing, unlike sawing, the cutting edge is in continuous contact with the material - steel goes blunt in minutes in chipboard and glued panel. Carbide holds up and gives clean, precise cuts throughout its life. The edge geometry is improved against kickback, which on a hand-held router is no formality. Laser markings The body carries the technical data and the minimum insertion depth into the collet in laser marking. The second is genuinely useful: a bit not seated deep enough pulls out under load, while one pushed in too far bottoms out in the collet and never clamps properly. The marking removes the guesswork. Compatibility The shank is cylindrical 8 mm and fits plunge routers and trim routers with an 8 mm collet. The machine's speed must be below 35,000 rpm - at 16 mm diameter, most routers run comfortably at a mid setting. Working with a V-bit A V-bit has a quirk that sets it apart from a straight bit: groove width is set by depth. The same cutter draws a thin line shallow and a wide channel deep - so the depth setting decides the whole look of the result, and it is worth trying on an offcut of the same material first. The second quirk is feed rate. On a V profile the tip moves slowly while the rim moves fast, because the two sit at different radii from the axis. Feed too quickly and the tip burns the material while the outer edges are still cutting cleanly. Work at a steady, moderate feed, and take a deep groove in two passes rather than one. Technical specifications ManufacturerBosch Article number2608628407 RangePRO TypeV-groove router bit Angle90° Diameter16 mm Working length15.7 mm ShankCylindrical, 8 mm Cutting edgesTungsten carbide (HW) Maximum speed35,000 rpm MaterialWood and panel products For machinesPlunge routers and trim routers Questions and Answers What is a V-groove bit for? It cuts a groove with a V section. It is used for decorative grooves, for engraving lettering, and for folding a panel to a right angle - the groove is cut in the back and the panel folds to exactly 90°. What is the angle? 90° - each wall of the groove sits at 45° to the surface. That is the angle at which two folded parts meet in a right angle. Which collet does it need? The shank is cylindrical 8 mm, so an 8 mm collet. The bit works in plunge routers and in trim routers. What do the laser markings show? The technical data and the minimum insertion depth into the collet. A bit not seated deep enough pulls out under load - the marking removes the guesswork. Why are the edges carbide? In routing the cutting edge is in continuous contact with the material. Steel dulls within minutes in chipboard and glued panel; carbide holds its edge and cuts cleanly throughout its life. What speed should it run at? The maximum is 35,000 rpm. At 16 mm diameter most routers run comfortably at a mid setting - required speed falls as diameter rises. How deep does it cut? Working length is 15.7 mm. With a V-bit, though, the groove width depends on depth - at full depth the groove reaches the full 16 mm diameter in width. ..

Dremel Wood Carving Bit 26150115JADescription: The Dremel high-speed router bit is ideal for shaping, carving, grooving, cutting, and making tapered holes in soft metals, plastic, and wood. The durable Dremel Max Carving Bit 115JA is coated with titanium nitride to last twice as long as standard uncoated accessories. Let the accessory and your Dremel Multi-Tool do the work without forcing or pressing too hard. For best results, use the sides of the accessory head at an angle of less than 90 degrees.Technical specifications:Accessory length: 38 mmHead type: rectangular headMax. RPM: 30,000 rpmShaft diameter: 3.2 mmWorking diameter: 7.8 mmQuantity per package: 1 pchttps://youtu.be/BriBq3WhewA..

CMT Router Arbor with Bearing for Triple Cutter, 8 mm, 92408010DescriptionThe CMT 92408010 is a router arbor with bearing designed for triple cutter assemblies and compatible slot cutter sets with an 8 mm shank. It serves as the mounting shaft for modular router cutters, providing secure attachment and precise guidance during routing operations. The integrated guide bearing allows smooth edge-following and accurate routing, while the 8 mm shank ensures compatibility with routers equipped with an 8 mm collet. The CMT 92408010 is an ideal accessory for professional woodworkers and demanding DIY users looking for a genuine arbor for modular slot cutter systems.Technical Specifications Brand: CMT Type: Router arbor with bearing Application: Triple cutter and slot cutter assemblies Shank diameter: 8 mm Guide bearing: Yes Suitable for: Woodworking applications Package Includes 1 x CMT Router Arbor with Bearing 92408010..

Dewalt DT4578 Forstner BitDescription: The Dewalt DT4578 Forstner wood router bit is specially designed for fast and precise drilling of clean, accurate holes in various types of materials such as hardwood, softwood, wooden boards, and gypsum boards. It features a non-slip hexagonal shank that prevents unwanted rotation in the chuck and ensures maximum power during operation. The router's special design includes three flat surfaces that also prevent rotation and provide greater stability during operation. Technical specifications:Size: 35 mmCutter profile: face-cylindricalMaterial: SP alloy steelWeight: 0.185 kg..

Dewalt DT4579 Forstner BitDescription: The Dewalt DT4579 Forstner wood router bit is specially designed for fast and precise drilling of clean, accurate holes in various types of materials such as hardwood, softwood, wooden boards, and drywall. It features a non-slip hexagonal shank that prevents unwanted rotation in the chuck and ensures maximum power during operation. The router's special design includes three flat surfaces that also prevent rotation and provide greater stability during operation. Technical specifications:Size: 38 mmCutter profile: end-cylindricalMaterial: SP alloy steelWeight: 0.240 kg..

Dewalt DT4582 Forstner BitDescription: The Dewalt DT4582 Forstner wood router bit is specially designed for fast and precise drilling of clean, accurate holes in various types of materials, such as hardwood, softwood, wooden boards, and drywall. It features a non-slip hexagonal shank that prevents unwanted rotation in the chuck and ensures maximum power during operation. The special design of the bit includes three flat surfaces that also prevent rotation and provide greater stability during operation. Technical specifications:Size: 51 mmCutter profile: face-cylindricalMaterial: SP alloy steelWeight: 0.300 kg..

Dewalt DT4585 Forstner BitDescription: The Dewalt DT4585 Forstner wood router bit is specially designed for fast and precise drilling of clean, accurate holes in various types of materials, such as hardwood, softwood, wooden boards, and gypsum boards. It features a non-slip hexagonal shank that prevents unwanted rotation in the chuck and ensures maximum power during operation. The router's special design includes three flat surfaces that also prevent rotation and provide greater stability during operation. Technical specifications:Size: 65 mmCutter profile: face-cylindricalMaterial: SP alloy steelWeight: 0.320 kg..

Dewalt DT4586 Forstner BitDescription: The Dewalt DT4586 Forstner wood router bit is specially designed for fast and precise drilling of clean, accurate holes in various types of materials such as hardwood, softwood, wooden boards, and gypsum boards. It features a non-slip hexagonal shank that prevents unwanted rotation in the chuck and ensures maximum power during operation. The bit's special design includes three flat surfaces that also prevent rotation and provide greater stability during operation. Technical specifications:Size: 68 mmCutter profile: face-cylindricalMaterial: SP alloy steelWeight: 0.347 kg..

Dewalt DT4587 Forstner BitDescription: The Dewalt DT4587 Forstner-type wood router bit is specially designed for fast and precise drilling of clean, accurate holes in various types of materials such as hardwood, softwood, wooden boards, and gypsum boards. It features a non-slip hexagonal shank that prevents unwanted rotation in the chuck and ensures maximum power during operation. The special design of the bit includes three flat surfaces that also prevent rotation and provide greater stability during operation. Technical specifications:Size: 74 mmCutter profile: end-cylindricalMaterial: SP alloy steelWeight: 0.368 kg..