Manufacturer: MilwaukeeModel: M12BI-0Warranty: 3 years after registration on the websiteOnly the unit is included-NO batteries or charger!High-efficiency motor and pump. Compact, lightweight design for quickly inflating car, light truck, and compact equipment tires. Auto-stop technology inflates to the user's preset pressure for high-precision inflation. Backlit LCD display with digital pressure gauge and fuel gauge that shows battery level. Anti-vibration stand-all rubber feet stay in place during inflation. Nozzle and hose storage-stores a 66 cm hose and attachments with an all-brass Schrader valve. Flexible battery system: works with all Milwaukee® M12TM batteries. Dimensions (HxW): 190.5 mm x 165.1 mm Duty cycle: 50% at 10 minutes on and 10 minutes off Accuracy: ± 3% Nozzle length: 660 mm Max. pressure: 8.27 bar (120 psi) No-load flow: 24.9 L/min..

Bosch PNEO Cordless Air Pump, 3.6 V, 10.3 bar, with 3.0 Ah Battery, 0603947500 The Bosch PNEO, article number 0603947500, is a cordless air pump (mini compressor) from Bosch's home and garden range. The manufacturer describes it as a small tool with big performance - an intuitive pump for all applications up to 10.3 bar whose compact, lightweight design makes it a handy companion at home and on the go. A BA 4V 3.0 Ah battery is included. Precise inflation with auto-stop The pump measures pressure in real time. You preselect the target value, and the auto-stop function switches the pump off as soon as that value is reached. The memory stores up to three preferred pressure values, so values you use often are recalled without setting them again. The clear, bright display with a large font shows the current and target value on two lines and is readable in daylight. Handy design The housing is compact and angled at 20° for easy operation in any position. The textile hose rotates through 360° and ends in a threaded metal coupler to reach the tightest spots. An integrated LED light illuminates the work area even in the dark. The adapters are kept in a storage compartment in the tool itself, so they are always at hand. Battery and charging The PNEO runs on an exchangeable BA 4V battery. Bosch states that the 3.0 Ah battery charges via USB directly in the tool, and if it ever needs replacing, it is simply swapped for a new one so the pump stays in service for years. Applications With its various adapters the PNEO inflates car, bicycle and motorcycle tyres, balls such as footballs, and small inflatables for leisure and water sports - anything up to 10.3 bar. What's in the Box Bosch PNEO cordless air pump 1 x BA 4V 3.0 Ah battery French valve adapter Ball needle Volume adapter (for inflatables) 1 x quick snap adapter (1 600 A03 8WN) 1 x bag (1 619 PB5 318) Technical specifications ManufacturerBosch ModelPNEO Article number0603947500 EAN4053423689891 Battery voltage3.6 V Battery compatibilityBA 4V (exchangeable) Battery included1 x BA 4V 3.0 Ah Maximum pressure10.3 bar / 150 psi / 1030 kPa Maximum output volume10 l/min Hose length0.2 m, textile, 360° rotatable Auto-stopYes, at the preselected value MemoryUp to 3 pressure values Work lightIntegrated LED ChargingVia USB in the tool Dimensions (L x W x H)215 x 120 x 85 mm Weight0.5 kg (0.40 kg without battery) Questions and Answers Is a battery included? Yes. The kit includes one BA 4V battery with a capacity of 3.0 Ah. The battery is exchangeable and, according to Bosch, charges via USB directly in the tool. What pressure does the pump reach? The maximum pressure is 10.3 bar, or 150 psi (1030 kPa). The maximum output volume is 10 l/min. Does the pump stop by itself at the right pressure? Yes. You preselect the target value and the auto-stop function switches the pump off when it is reached. The memory stores up to three preferred values. Which adapters are included? A French valve adapter, a ball needle, a volume adapter and a quick snap adapter (1 600 A03 8WN). The adapters are stored in a compartment in the pump itself, and a bag (1 619 PB5 318) is included. What can the PNEO inflate? The manufacturer lists car, bicycle and motorcycle tyres, balls and small inflatables for leisure and water sports. All applications go up to 10.3 bar. How heavy and how big is it? The pump weighs 0.5 kg with the battery and 0.40 kg without it. It measures 215 x 120 x 85 mm, and the hose is 0.2 m long. Can it be used in the dark? Yes. The PNEO has an integrated LED light that illuminates the work area. The display is bright with a large font and shows the current and target value on two lines. ..

DeWalt DPS8016 Pneumatic Stapler, 4-16 mm The DeWalt DPS8016 is a combination pneumatic stapler and nailer featuring an aluminum body and a comfortable rubber grip. Its compact and lightweight design makes it the ideal tool for working in hard-to-reach and tight spaces. It features adjustable power settings. The magazine holds 125 nails/staples ranging from 4 to 16 mm in length. The exhaust port directs exhaust air away from the user, ensuring optimal tool performance. Compatible with DeWALT DST80 staples (4 to 16 mm). [embed]https://youtu.be/qjXuMe1xdFQ[/embed] Technical Specifications:Brand: DeWalt;Material: Aluminum;Max pressure: 8.4 bar;Nail length: 4-16 mm;Magazine capacity: 125 pcs.;Weight: 1.7 kg..

Pneumatic nailer for nails 15-35 mm long. This model is equipped with a sight that allows you to check the number of nails remaining in the magazine. The dust-blowing function allows you to clean the work area with the push of a button. Technical specifications:Manufacturer: MakitaModel: AF353Nail length: 15-35 mmNail type: 23GAMagazine capacity: 130 nailsMax air pressure: 4.5 - 6.9 barAir consumption: - l/minAir nozzle: 1/4"Noise level: 92 dBDimensions (L x W x H): 208 x 66 x 191 mmWeight: 0.9 kg..

Makita AF506 NailerDescription: The Makita AF506 pneumatic nailer is a powerful and reliable tool designed for driving nails into wood with high efficiency. It operates with a compressor, ensuring stable and consistent power. It allows for easy removal of jammed nails without the need for additional tools. It is equipped with a 360° rotating air hose and an adjustable air outlet, allowing for adaptation to the specific task. The driving depth is also adjustable without tools, ensuring convenience and precision during operation . Technical Specifications:Nail length: 15-50 mmNail type: 18GAMagazine capacity: 100 nailsMax. air pressure: 4.9-8.3 barAir consumption: - l/minAir nozzle: 1/4"Noise level: 99 dBDimensions (L x W x H): 250 x 70 x 256 mmWeight: 1.324 kgIncluded:1 x 30 ml machine oil (181434-7)1 x Plastic carrying case..

Makita AN454 NailerDescription: The Makita AN454 Pneumatic Nailer delivers reliable and easy nailing. You can adjust the nailing depth in steps, ensuring precision and control over your project. It features two operating modes-single and continuous nailing. Equipped with a soft rubber grip that offers a secure hold and increased comfort while working. To prevent the last nail from falling out, this nailer features a built-in magnet that ensures reliable and proper retention. Technical Specifications:Nail length: 19-45 mmNail width: 3.05 mmNail type: J Magazine capacity: 120 nails Max air pressure: 4.9-8.3 barAir nozzle: 1/4" Dimensions (L x W x H): 256 x 117 x 271 mmWeight: 2.4 kg..

Makita DMP180Z Cordless Inflator, 18V LXT, 8.3 bar Makita DMP180Z is a cordless air pump from the 18V LXT system, reaching 8.3 bar (121 psi) at an output of around 12 l/min. The Z suffix means the tool is supplied as a bare unit - no battery and no charger. The pump is oil-free and needs no sump maintenance. Preset pressure and automatic shut-off This is the feature people buy the tool for. You set the pressure in advance, the pump runs and stops by itself when it gets there. The practical difference from a compressor with a hand gun is that you do not stand watching the gauge, and all four tyres end up at exactly the same pressure - and it is the difference between tyres that actually wears a set out and affects how the car holds the road. There is also no way to over-inflate. What 8.3 bar covers A maximum of 8.3 bar covers car tyres (typically 2.0-2.5 bar) with a wide margin, and also bicycle tyres, where road tyres want 6-8 bar - a pressure that is hard work with a hand pump. The 12 l/min output matches that purpose: this is a pump for topping up, not for filling a large volume from flat. A car tyre starting at zero takes a noticeable while. Adaptors supplied Besides the standard car (Schrader) valve connector, the delivery includes a Presta bicycle valve adaptor, a ball needle and a tapered nozzle for inflatables - air beds, rings, boats. That covers practically everything you inflate at home or in a workshop. Thermal protection and LED light The pump has a thermostat protecting it from overheating during prolonged use - a piston compressor heats up quickly and without that protection the risk is real. The LED light has a specific value here: changing or inflating a tyre almost always happens in the evening or in a dim car park, and the valve is on the underside of the wheel. Handle and hose The body has a top handle, so the pump can be carried and set down steadily beside the wheel. The hose is around 650 mm and stows into the housing, and the connector has a lever clip that locks onto the valve and frees your hands. LXT battery compatibility The pump runs on every Makita 18V LXT slide battery, from 1.5 Ah to 6.0 Ah. For vehicle use a larger pack is worth having: taking four tyres from 1.8 to 2.3 bar consumes a noticeable share of a small battery. XGT 40V packs do not fit. Technical specifications ManufacturerMakita ModelDMP180Z TypeCordless air pump, oil-free Platform18V LXT Li-Ion Maximum pressure8.3 bar (121 psi) Air outputApproximately 12 l/min Pressure settingPreset, with automatic shut-off Work lightLED ProtectionThermostat against overheating Hose lengthApproximately 650 mm ConnectorsSchrader, Presta, ball needle, tapered adaptor Supplied asBare unit - no battery, no charger Questions and Answers Are a battery and charger included? No. The Z in DMP180Z means bare unit. You will need at least one Makita 18V LXT slide battery and a matching charger. Will it inflate a completely flat car tyre? It will, but it takes time - the 12 l/min output is designed for topping up rather than filling a large volume from zero. For regular pressure checks and corrections the pump is exactly right. Is it suitable for a road bike? Yes. The 8.3 bar maximum covers road tyres, which want 6-8 bar, and a Presta valve adaptor is included. That is a pressure most people find hard work with a hand pump. Does it stop by itself at the set pressure? Yes - you set the pressure in advance and the pump shuts off automatically once it reaches it. That way every tyre ends up at the same pressure and there is no risk of over-inflating. Which nozzles are included? The standard Schrader car valve connector, a Presta bicycle valve adaptor, a ball needle, and a tapered adaptor for inflatables such as air beds, rings and boats. Do Makita XGT 40V batteries fit? No. The pump takes only slide batteries from the 18V LXT system. XGT is a separate platform with a different interface and the packs are not interchangeable. Does it overheat with prolonged use? The pump has a thermostat that shuts it down before it overheats. Piston compressors in this class warm up quickly, so it is normal to need a short pause when filling several tyres in a row. ..

STANLEY SFMCE520B Air CompressorDescription: The STANLEY SFMCE520B mini air compressor is compact and powerful, designed for maximum versatility and convenience. It operates at a maximum pressure of 11 bar and offers three power sources-a V20 18V battery (sold separately), an AC plug, and a 12V car adapter-allowing for use anywhere-at home, in the garage, or on the road. Thanks to its high- and low-volume output, the compressor is suitable for inflating tires, sports balls, and bicycles, as well as inflatable mattresses and other large-volume items. The auto-shutoff feature ensures precise pressure-simply set the desired value, and the device stops automatically when it is reached. The sturdy housing and compact design ensure durability and easy storage, while the built-in handle and flexible rubber hose allow for convenient transport and operation. As part of the innovative 18V STANLEY® FATMAX® V20 system, this compressor combines mobility, reliability, and power, making it an indispensable tool for both professionals and home use. Ships without a battery or charger!Technical specifications:Voltage: 18 VAirflow: 40 l/minPressure: 11 barWeight: 2.2 kgIncluded accessories:NozzlesTire inflation hoseHigh-volume, low-pressure inflation hose https://youtu.be/L0kYBS2R9Os?si=tME4SQksuYra4QzD..

Manufacturer : DeWALT Model: DPSB2IN1 Warranty: 2 years for individuals / 1 year for businesses Description: The DPSB2IN1 is a combination pneumatic stapler and nailer manufactured by DeWALT. The exhaust port, which directs exhaust air away from the user, can rotate 360°. The magazine holds 100 nails or staples with lengths ranging from 15 to 40 mm. The driving depth is adjustable without tools. Rubber pads protect the tool's body. Technical Specifications: Max. pressure: 7 bar Height, mm: 216 mm Thickness, mm: 51 mm Width, mm: 235 mm Nail type: 18GA Nail length: 15-40 mm Magazine capacity (pcs.): 100 pcs...