Bosch Ratchet 1600A03AC6, 1/4 inch The Bosch 1600A03AC6 is a hand ratchet with a 1/4 inch square drive, 150 mm long and 25 mm across the head. The mechanism has 72 teeth and a 5 degree working angle, and the torque stated by the manufacturer is 93 Nm. The tool belongs to the Bosch Professional hand tool range. Powder-metallurgy ring gear The ring gear of the mechanism is made by powder metallurgy - steel sintered from powder, which gives a more even structure in the small teeth. The gear has 72 teeth, which means a 5 degree working angle: that is all the swing needed for the next tooth to engage. In a tight space, where the hand can only turn a few degrees, that is the difference between a tool that works and a tool that only clicks. Chrome-vanadium steel and ergonomics The body is chrome-vanadium steel - the same material Bosch uses for the screwdrivers and chisels in this range. The neck is curved and the handle is soft-gripped, so the force from the hand is transferred along the axis of rotation instead of being lost in slipping. The manufacturer states power transfer up to 50% above the requirement of the ISO 3315 standard. The direction switch is under the thumb and can be changed without taking the hand off the tool, and the socket lock button keeps the socket on the square when you are working upwards or overhead. What this size is for The 1/4 inch square is the small-assembly size - electrical panels, interior trim, automotive clips and anything tightened with a socket up to 13 mm. At 150 mm the lever is short and will not let you apply enough torque to shear a small fastener. Applications Fitting and removing threaded fasteners with 1/4 inch sockets, workshop servicing, installation work, structures and machinery, and anywhere the space does not allow a full turn of a wrench. The ratchet takes any standard socket or extension with a 1/4 inch drive, whoever made it. Technical specifications Part number1600A03AC6 EAN4059952737379 Size1/4 in Length150 mm Width25 mm Materialchrome vanadium Ratchet teeth72 Working angle5 degrees Torque93 Nm Torque vs. standard+50% StandardISO 3315 Socket lock buttonyes Packaging typepaper / cardboard / corrugated board, packaging with Euro hole Pack quantity1 pc ManufacturerBosch Professional Questions and Answers What is the torque rating of the 1600A03AC6 ratchet? The manufacturer states 93 Nm for this model. That is the torque the mechanism is designed to withstand, not a recommended tightening torque - that is set by the fastener itself. What does a 5 degree working angle mean? The gear has 72 teeth, so the next tooth engages every 5 degrees of swing. In a tight space, where the hand cannot turn further, the ratchet keeps working where a coarser mechanism would just skip. Do sockets from other brands fit? Yes. The drive is a standard 1/4 inch square and accepts any socket, extension, universal joint or adapter of that size, whoever made it. What is the socket lock button for? The button holds the socket on the square instead of letting it drop when the tool is turned over. That matters when working upwards, overhead or at height, where a dropped socket takes a long time to find. How is the direction changed? With the switch on the head, pressed with the thumb without taking the hand off the handle. One position tightens, the other loosens. What does +50% above the standard mean? Bosch states that the ratchet transfers torque up to 50 per cent above the requirement of ISO 3315, the standard that sets minimum figures for hand ratchets. The figure is the manufacturer's. Is there another size in the range? Yes. The range includes a 1/4 inch ratchet (1600A03AC6, 150 mm) and a 1/2 inch ratchet (1600A03AC8, 265 mm). Both have 72 teeth, a 5 degree working angle and a chrome-vanadium body. ..

Bosch Ratchet 1600A03AC8, 1/2 inch The Bosch 1600A03AC8 is a hand ratchet with a 1/2 inch square drive, 265 mm long and 41 mm across the head. The mechanism has 72 teeth and a 5 degree working angle, and the torque stated by the manufacturer is 768 Nm. The tool belongs to the Bosch Professional hand tool range. Powder-metallurgy ring gear The ring gear of the mechanism is made by powder metallurgy - steel sintered from powder, which gives a more even structure in the small teeth. The gear has 72 teeth, which means a 5 degree working angle: that is all the swing needed for the next tooth to engage. In a tight space, where the hand can only turn a few degrees, that is the difference between a tool that works and a tool that only clicks. Chrome-vanadium steel and ergonomics The body is chrome-vanadium steel - the same material Bosch uses for the screwdrivers and chisels in this range. The neck is curved and the handle is soft-gripped, so the force from the hand is transferred along the axis of rotation instead of being lost in slipping. The manufacturer states power transfer up to 50% above the requirement of the ISO 3315 standard. The direction switch is under the thumb and can be changed without taking the hand off the tool, and the socket lock button keeps the socket on the square when you are working upwards or overhead. What this size is for The 1/2 inch square is the size for heavy fasteners - anchors, structural bolts, running gear. The 265 mm length gives the leverage needed to break a tight bolt loose without reaching for a cheater bar. Applications Fitting and removing threaded fasteners with 1/2 inch sockets, workshop servicing, installation work, structures and machinery, and anywhere the space does not allow a full turn of a wrench. The ratchet takes any standard socket or extension with a 1/2 inch drive, whoever made it. Technical specifications Part number1600A03AC8 EAN4059952737393 Size1/2 in Length265 mm Width41 mm Materialchrome vanadium Ratchet teeth72 Working angle5 degrees Torque768 Nm Torque vs. standard+50% StandardISO 3315 Socket lock buttonyes Packaging typepaper / cardboard / corrugated board, packaging with Euro hole Pack quantity1 pc ManufacturerBosch Professional Questions and Answers What is the torque rating of the 1600A03AC8 ratchet? The manufacturer states 768 Nm for this model. That is the torque the mechanism is designed to withstand, not a recommended tightening torque - that is set by the fastener itself. What does a 5 degree working angle mean? The gear has 72 teeth, so the next tooth engages every 5 degrees of swing. In a tight space, where the hand cannot turn further, the ratchet keeps working where a coarser mechanism would just skip. Do sockets from other brands fit? Yes. The drive is a standard 1/2 inch square and accepts any socket, extension, universal joint or adapter of that size, whoever made it. What is the socket lock button for? The button holds the socket on the square instead of letting it drop when the tool is turned over. That matters when working upwards, overhead or at height, where a dropped socket takes a long time to find. How is the direction changed? With the switch on the head, pressed with the thumb without taking the hand off the handle. One position tightens, the other loosens. What does +50% above the standard mean? Bosch states that the ratchet transfers torque up to 50 per cent above the requirement of ISO 3315, the standard that sets minimum figures for hand ratchets. The figure is the manufacturer's. Is there another size in the range? Yes. The range includes a 1/4 inch ratchet (1600A03AC6, 150 mm) and a 1/2 inch ratchet (1600A03AC8, 265 mm). Both have 72 teeth, a 5 degree working angle and a chrome-vanadium body. ..

Bosch Ratchet Set 1600A03AC7, 1/4 inch, 37 pcs The Bosch 1600A03AC7 is a 37-piece set with a 1/4 inch drive, laid out in a case. It holds a 1/4 inch ratchet, a universal screwdriver with a magnetic hexagon socket, ten sockets, five adapters and eighteen screwdriver bits. The set belongs to the Bosch Professional hand tool range. The ratchet in the set The ratchets in this range use a powder-metallurgy ring gear with 72 teeth, giving a 5 degree working angle - that is all the swing needed for the next tooth to engage, and all there is to be had in a tight space. The body is chrome-vanadium steel, the neck is curved and the handle is soft-gripped. The manufacturer states power transfer up to 50% above the requirement of the ISO 3315 standard. The direction switch changes under the thumb, without taking the hand off the tool. What the sockets and bits cover The sockets run from 5 to 13 mm - the range of small fasteners found in panels, boards, clips and furniture. The bits cover the four commonest profiles: cross-head PH and PZ, slotted SL and Torx, plus ALLEN hex from 3 to 6 mm. Every bit is 25 mm long, so it fits both the universal screwdriver's holder and the adapters to the square drive. The adapters are what make it a set The five adapters are what turns a box of sockets into a working kit: two extensions of 50 and 100 mm for reaching down, a universal joint for working at an angle, and two converters between the 1/4 inch square and a hexagon drive. Those last two let the bits be turned with the ratchet and the sockets be turned with a cordless screwdriver. Applications Electrical installation and distribution boards, interior finishing, assembling and dismantling furniture and equipment, light servicing, machine maintenance, and any job where the fasteners are small and mixed. The case holds every piece in its place, so a missing socket is obvious at a glance. Scope of supply as published by the manufacturer 1/4 inch ratchet Universal screwdriver with magnetic hexagon socket Sockets 1/4 inch: 5; 5.5; 6; 7; 8; 9; 10; 11; 12; 13 mm Adapters: extension 50 mm; extension 100 mm; universal joint; 1/4 inch to HEX; HEX to 1/4 inch Bits 25 mm: PH1, PH2, PH3; PZ1, PZ2, PZ3; SL0.5x4, SL0.6x5, SL1x6; T10, T15, T20, T25, T30; ALLEN 3, 4, 5 and 6 mm Technical specifications Part number1600A03AC7 EAN4059952737386 Size1/4 in Number of pieces37 Sockets5; 5.5; 6; 7; 8; 9; 10; 11; 12; 13 mm Adaptersextensions 50 and 100 mm, universal joint, 1/4 in / HEX converters BitsPH1-PH3, PZ1-PZ3, SL0.5x4, SL0.6x5, SL1x6, T10-T30, ALLEN 3-6 mm, all 25 mm Ratchet1/4 in, 72 teeth, 5 degree working angle Ratchet materialchrome vanadium Torque vs. standard+50% StandardISO 3315 Packaging typepaper / cardboard / corrugated board, box, no Euro hole Pack quantity37 pcs ManufacturerBosch Professional Questions and Answers What socket sizes are in the set? Ten 1/4 inch sockets: 5; 5.5; 6; 7; 8; 9; 10; 11; 12 and 13 mm. That is the list published by Bosch for part number 1600A03AC7. Which bits are included? Eighteen 25 mm bits: PH1, PH2, PH3; PZ1, PZ2, PZ3; SL0.5x4, SL0.6x5, SL1x6; T10, T15, T20, T25, T30; and ALLEN hex 3, 4, 5 and 6 mm. Can the set be used with a cordless screwdriver? Yes. The set includes a HEX to 1/4 inch square converter, which lets the sockets be driven by a screwdriver, and the reverse 1/4 inch to HEX adapter, which lets the bits be turned with the ratchet. How many teeth does the ratchet have? The ring gear has 72 teeth, which is a 5 degree working angle. The more teeth, the less swing is needed for the next one to engage - which matters when working in a confined space. Do sockets from other brands fit? Yes. The drive is a standard 1/4 inch square and accepts sockets, extensions and adapters of that size from any manufacturer. Does the set come in a case? The packaging Bosch specifies is a box without a Euro hole, and the official photograph shows the set laid out in a case with a moulded place for each piece. The catalogue piece count is 37. How does it differ from the 80-piece set? Set 1600A03AD0 has 80 pieces and combines two drives - 1/4 and 1/2 inch - so it also covers heavy fasteners. This set is 1/4 inch only and is aimed at small assembly work. ..

Bosch Ratchet Set 1600A03AD0, 1/4 and 1/2 inch, 80 pcs The Bosch 1600A03AD0 is an 80-piece set with two drives - 1/4 inch for small fasteners and 1/2 inch for heavy ones - laid out in a case. It is the largest set in the Bosch Professional hand tool range and is meant for the workshop and the service bay, where both fastener sizes turn up in the same job. The ratchet in the set The ratchets in this range use a powder-metallurgy ring gear with 72 teeth, giving a 5 degree working angle - that is all the swing needed for the next tooth to engage, and all there is to be had in a tight space. The body is chrome-vanadium steel, the neck is curved and the handle is soft-gripped. The manufacturer states power transfer up to 50% above the requirement of the ISO 3315 standard. The direction switch changes under the thumb, without taking the hand off the tool. Two drives in one case The 1/4 and 1/2 inch combination is the classic working pair. The small square carries a short lever and small sockets - the size for panels, boards and clips, where a larger tool simply does not fit and strips threads easily. The large square carries the long neck and the torque needed for anchors, structural bolts and running gear. One case with both sizes saves carrying two sets and hunting for the missing adapter. Build The ratchets are chrome-vanadium steel with a powder-metallurgy ring gear and a soft-grip handle. The case holds every piece in its place, so a missing socket shows itself when you open the lid rather than when you need it. The packaging Bosch specifies is a box without a Euro hole. Applications Servicing and maintenance of machinery and plant, automotive and agricultural repair, fitting steel structures and anchors, installation work, assembling and dismantling equipment. The set covers most of the usual range of threaded fasteners on a single site without reaching for a second box. What the manufacturer publishes For this part number Bosch states a drive size of 1/4 inch + 1/2 inch and 80 pieces. The manufacturer does not publish an itemised list of the individual sockets, extensions and bits for this article, so no such list is reproduced here - the contents can be seen in the official photograph of the case. Technical specifications Part number1600A03AD0 EAN4059952737409 Size1/4 in + 1/2 in Number of pieces80 Ratchetspowder-metallurgy ring gear, 72 teeth, 5 degree working angle Ratchet materialchrome vanadium Torque vs. standard+50% StandardISO 3315 Packaging typepaper / cardboard / corrugated board, box, no Euro hole Pack quantity1 pc ManufacturerBosch Professional Questions and Answers What drives does the set have? Two: a 1/4 inch square for small fasteners and a 1/2 inch square for heavy ones. That is the size Bosch states for part number 1600A03AD0. How many pieces are in the set? Eighty. The manufacturer publishes the piece count but not an itemised list of the individual sockets, extensions and bits for this article, so no such list is reproduced in the description. How many teeth do the ratchets have? The ratchets in this range use a powder-metallurgy ring gear with 72 teeth, which is a 5 degree working angle. The smaller the angle, the less room is needed for one engagement. Do sockets from other brands fit? Yes. Both drives are standard squares - 1/4 and 1/2 inch - and accept sockets, extensions, universal joints and adapters of those sizes from any manufacturer. What is the ISO 3315 standard? ISO 3315 sets the requirements for hand ratchets. Bosch states that the ratchets in this range transfer torque up to 50 per cent above the requirement of that standard. Does it come in a case? Yes, the official photograph shows the set laid out in a case with a moulded place for each piece and a carrying handle. Bosch specifies the packaging as a box without a Euro hole. How does it differ from the 37-piece set? Set 1600A03AC7 has the 1/4 inch drive only and 37 pieces - ratchet, sockets 5-13 mm, bits and adapters. This one adds a second 1/2 inch drive and runs to 80 pieces, so it also covers heavy fasteners. ..

DeWALT DCF500N Cordless RatchetDescription: The DeWALT DCF500N cordless ratchet, with 12 V voltage and 75 Nm torque, delivers high performance and precise control. Electronically adjustable speed and torque allow for flexibility during operation, while the compact design and ergonomic rubber grips ensure a comfortable and secure grip. The brushless motor ensures a longer service life and higher performance, while the powerful LEDs improve visibility in dark work areas. The ratchet comes with three interchangeable sockets. It is shipped without a battery or charger! Technical specifications:Voltage: 12 VMax. torque: 75 NmDrive size: 1/4", 1/4" HEX, and 3/8"No-load speed: 450 rpmLength: 330 mmWeight: 0.900 kghttps://youtu.be/VeztI2NS61c?si=hfOw5tJ5aFhNZCtF..

DeWALT DCF503EN Cordless RatchetDescription: The DeWALT DCF503EN cordless ratchet is a powerful and convenient tool designed for both professional and home use. This ratchet is equipped with a slim brushless motor that runs on a 12V battery, delivering an impressive torque of 81 Nm , and features a 3/8" drive. The ratchet has a reverse function that provides full control during operation. The E version is equipped with a 100 mm extended head for even more comfortable work in tight spaces. The trigger lock function allows for easy handling of the tool. Equipped with an LED light, which allows the user to work with precision and confidence even in dark or hard-to-reach places. Ships without a battery or charger! Technical specifications:Voltage: 12 VBattery type: Li-ionMechanical speeds: 1 No-load speed: 0 - 250 rpm Chuck size: 3/8" (square) Maximum torque: 81 NmLighting: LEDDimensions (L x W x H): 330 x - x - mmWeight: 1.2 kghttps://youtu.be/0uLdWLDX7_g?si=Uhpmo0_FZIjyFmxy..

DeWALT DCF504N RatchetDescription:The DeWALT DCF504N cordless ratchet is a powerful and compact tool that combines innovation and durability to deliver excellent results in a variety of applications. With its slim brushless motor and 12 V battery, the ratchet offers a maximum torque of 54 Nm, making it ideal for working with screws and nuts in confined spaces. The glass-fiber-reinforced plastic housing ensures additional strength and protection against oils and solvents, increasing the tool's durability. With 250 RPM and a 1/4" square drive, the DeWALT DCF504N offers excellent flexibility and precision. The slim body and built-in LED light make the ratchet exceptionally suitable for working in dark and tight enclosed spaces, ensuring visibility and convenience. With a variable-speed trigger, it allows for speed control depending on the specific application, and the trigger lock mechanism facilitates the work process. The additional reverse function contributes to the tool's versatility, making the DeWALT DCF504N the ideal assistant for every craftsman.Ships without batteries or charger! Technical specifications:Voltage: 12 VBattery type: Li-ionDrive size: 1/4"Max. torque: 54 NmWeight: 1.04 kghttps://youtu.be/b-Acnpj3BVk?si=pX0_piNZaF7QjjHG..

DeWALT DCF512N Cordless RatchetDescription: The DeWALT DCF512N Cordless Ratchet is a powerful and convenient tool designed for both professional and home use. This ratchet is equipped with a slim brushless motor that runs on an 18V battery, delivering an impressive torque of 95 Nm , and features a 1/2" square drive. The ratchet has a reverse function that provides full control during operation. The ratchet's speed is adjustable, making it suitable for various types of work and materials. For safety, the trigger cannot be locked, preventing unwanted accidents. Equipped with an LED light, it allows the user to work with precision and confidence even in dark or hard-to-reach areas. Ships without a battery or charger! Technical specifications:Voltage: 18 VBattery type: Li-ionSpeed settings: 1 No-load speed: 0 - 250 min-1 Chuck size: 1/2" (square) Maximum torque: 95 NmLighting: LEDDimensions (L x W x H): 360 x - x - mmWeight: 1.1 kghttps://youtube.com/shorts/BRvuPWsWmug?feature=share..

Milwaukee 4933480790 Cordless RatchetDescription: The Milwaukee M12 FHIR14LR-0 cordless ratchet features a maximum torque of up to 47 Nm and a speed of 450 rpm, delivering enhanced performance for professional applications. The 19 mm low-profile head design and extended neck allow for better access in tight spaces. Utilizing industry-leading FUELTM technology, with a durable mechanism and cast steel housing, the tool provides greater durability for the professional user. The metal variable-speed trigger provides maximum control over the tool, while the premium rubber grip is corrosion-resistant and ensures enhanced comfort during use. The LED light illuminates the work area, and the on-board battery indicator displays the remaining runtime. The DNA of Milwaukee's FUELTM platform redefines the balance of cordless technology by utilizing the brushless POWERSTATETM motor, the REDLITHIUMTM battery, and REDLINK PLUSTM electronic technology, which deliver exceptional power, runtime, and durability. This ratchet works with all MILWAUKEE® M12TM batteries. Ships without battery and charger! Technical specifications:Voltage: 12 VBattery type: Li-ionNo-load speed: 0 - 450 rpm Max. torque: 47 NmChuck: 1/4"Length: 348 mmWeight: 1.1 kghttps://youtu.be/qYWj1KaMEYM?si=YdnTeIO1Z0qj11nx..

Manufacturer : Milwaukee Model: M12FIR38-201B Warranty: 3 years after registration on the website Comes with 1 x 2.0Ah lithium-ion battery, charger, and carrying case. Description: Industry-leading FUELTM technology, combined with a reinforced mechanism and die-cast aluminum housing, provides greater durability for the professional user With up to 75 Nm of maximum torque and 200 RPM, this tool is the ideal fastening solution for automotive mechanics, maintenance, and repair professionals. The metal variable-speed trigger provides ultimate control over the tool. The superior rubber grip resists corrosive materials and provides enhanced comfort during use. The LED light illuminates the work area, while the on-board display shows the remaining runtime. Comes with a 1/4" adapter. Tool accepts a 3/8-inch square drive. The low-profile head design allows users better access in tight spaces. The REDLINK PLUSTM intelligent system provides advanced digital overload protection for the tool and battery and uniquely enhances tool performance under load. The REDLITHIUM-IONTM battery features superior pack construction, electronics, and no-drift performance to deliver more runtime and more work over the life of the pack. Flexible battery system: works with all Milwaukee® M12TM batteries. Technical Specifications: Battery Capacity: 2.0 Ah Battery Type: Li-ion Included Charger: 40 min Length: 307 mm Max. Torque: 75 Nm Voltage: 12 V Weight (with battery): 1.4 kg No-load speed: 0 - 200 rpm Number of batteries included: 1 Sound power level: 94 dB (A) Sound power level uncertainty: 3 dB(A) Sound pressure level: 83 dB(A) Sound pressure level uncertainty: 3 dB(A) Delivered in: Carrying case Tool chuck: 3/8" square drive Vibration (impact fastening of fasteners at maximum tool capacity): 3.1 m/s2 Vibration uncertainty (impact fastening of fasteners at maximum tool capacity): 1.5 m/s2..

Milwaukee 4933480791 Cordless RatchetDescription: The Milwaukee M12FHIR38LR-0 cordless ratchet features an extended reach and a compact head, providing easy access to tight spaces. With the innovative recessed forward-reverse switch, users can conveniently switch between drive and ratchet modes without restricting access to the work area. The tool's higher speed improves productivity and reduces fatigue by minimizing the time spent working in tight spaces. With a maximum torque of up to 47.5 Nm , this ratchet is a powerful tool for a variety of applications. Comes without a battery or charger! Technical specifications:Voltage: 12 VBattery type: Li-ionNo-load speed: 0 - 450 rpm Max. torque: 47.5 NmChuck: 3/8"Head width: 32.8 x 29.5 mmLength: 363 mmWeight: 0.91 kghttps://youtu.be/HuJBwAY9t98?si=LoNS5pP4JWXHDvJF..

Manufacturer : Milwaukee Model: M12FIR38-0 Warranty: 3 years after registration on the website Body only-NO batteries or charger included. Description: Industry-leading FUELTM technology, combined with a reinforced mechanism and a die-cast aluminum housing, provides greater durability for the professional user With up to 75 Nm of maximum torque and 200 RPM, this tool is the ideal fastening solution for automotive mechanics, maintenance, and repair specialists. The metal variable-speed trigger provides ultimate control over the tool. The superior rubber grip resists corrosive materials and provides enhanced comfort during use. The LED light illuminates the work area, while the on-board display shows the remaining runtime. Comes with a 1/4" adapter. Tool accepts a 3/8-inch square drive. The low-profile head design allows users better access in tight spaces. The REDLINK PLUSTM intelligent system provides advanced digital overload protection for the tool and battery and uniquely enhances tool performance under load. The REDLITHIUM-IONTM battery features superior pack construction, electronics, and no-drift performance to deliver more runtime and more work over the life of the pack. Flexible battery system: works with all Milwaukee® M12TM batteries. Technical Specifications: Battery Type: Li-ion Length: 307 mm Max. Torque: 75 Nm Voltage: 12V No-load speed: 0 - 200 rpm Sound power level: 94 dB (A) Sound power level uncertainty: 3 dB(A) Sound pressure level: 83 dB(A) Sound pressure level uncertainty: 3 dB(A) Tool chuck: 3/8" square drive Vibration (impact fastening of fasteners at maximum tool capacity): 3.1 m/s2 Vibration uncertainty (impact fastening of fasteners at maximum tool capacity): 1.5 m/s2..

Milwaukee M12 ONEFTR38-201C Cordless Torque WrenchDescription: The Milwaukee M12 ONEFTR38-201C cordless torque wrench delivers up to 50% faster installation compared to hand tools. This allows the user to complete tasks more efficiently and with less effort. With a powerful brushless POWERSTATETM motor, REDLITHIUMTM battery, and REDLINK PLUSTM electronic intelligence, it delivers exceptional power, runtime, and durability. It offers a torque range from 13.6 Nm to 135.6 Nm with an accuracy of ±2% . This ensures reliable tightening of fasteners with critical torque and prevents over- or under-tightening. With ONE-KEYTM technology, the user can record torque, providing torque data and adaptive reports for inspectors or owners, which improves job tracking and documentation. It features an adjustable torque output that allows control of the tool's output torque through the motor. With four torque measurement modes: ft-lb, in-lb, Nm, and kg-cm . The tool is available in six languages, including English, Spanish, and French. Four notification modes indicate when the tool reaches, meets, or exceeds the target torque (audible, LED, LCD, and vibration). Tightening is easy in two steps: Pull the trigger until the tool stops just before the target torque value, then finish by hand to reach the target torque.Technical Specifications:Voltage: 12 VBattery type: Li-ionAccuracy: CW ±2%, CCW ±3%Max. torque: 135.6 NmTorque range: 13.6 - 135.6 NmNo-load speed: 0 - 100 rpmChuck: 3/8" squareSound power level: 90.99 dBAWeight (EPTA): 2.5 kgIncluded:1 x C12 C charger1 xM12 B2 battery1 x Kitboxhttps://youtu.be/ddfE0VrTDdQ..

Wera 05018110001 Impact Screwdriver Set with BitsDescription:The Wera 05018110001 impact screwdriver with bits allows you to switch between impact and standard modes, ensuring maximum flexibility during use. The impact force is converted into rotational motion with a torque of up to 25 Nm, thanks to the through-shank design, which minimizes energy loss. The screwdriver features specially hardened shanks with a hexagonal and 1/4" drive, ensuring exceptional durability. The sturdy holder allows for the use of various bits. This tool combines the advantages of impact screwdrivers, compact tools, and through-blade screwdrivers, making it the ideal choice for professionals and enthusiasts.Technical Specifications:Chuck: 1/4"Bit length: 70 mmNumber in set: 19 pcsWeight: 0.728 kgThe set includes:Kraftform Plus 921 1/4" x 163.5 mm impact screwdriver, 05018100001851 S PH bits05018160001 - 1x PH 1 x 70 mm05018161001 - 1x PH 2 x 70 mm05018162001 - 1x PH 3 x 70 mmBits 855 S PZ05018163001 - 1x PZ 1 x 70 mm05018164001 - 1x PZ 2 x 70 mm05018165001 - 1x PZ 3 x 70 mmBits 867 S TORX®05018166001 - 1x TX 15 x 70 mm05018167001 - 1x TX 20 x 70 mm05018168001 - 1x TX 25 x 70 mm05018169001 - 1x TX 30 x 70 mm05018170001 - 1x TX 40 x 70 mm840 S Hex-Plus bits05018150001 - 1x 3 x 70 mm05018151001 - 1x 4 x 70 mm05018152001 - 1x 5 x 70 mm05018153001 - 1x 6 x 70 mm800 S Bits - Flat05018140001 - 1x 0.8 x 4 x 70 mm05018141001 - 1x 1 x 5.5 x 70 mm05018142001 - 1x 1.2 x 6.5 x 70 mmDurable storage case..

Manufacturer : Milwaukee Model: M12IR-201B Warranty: 3 years after registration on the website Comes with 1 x 2.0Ah lithium-ion battery, charger, and carrying case. Description: Best-in-class power and speed with 47 Nm of torque and a no-load speed of 250 rpm. REDLINKTM electronics provide overload protection for both the tool and the battery, ensuring the highest quality in the system. Reinforced housing-provides high durability, similar to steel ratchets. Compact design-ideal for tight spaces and small engine compartments. Variable-speed trigger switch-provides greater user control during operation. Individual battery cell monitoring optimizes tool runtime and ensures the longevity of the battery pack. On-board fuel gauge and LED light-added user convenience and illumination in low-light working conditions. The REDLITHIUM-IONTM battery delivers up to 2x more runtime, up to 20% more power, up to 2x longer battery life, and performs better down to -20°C compared to other lithium-ion technologies. Flexible battery system: works with all Milwaukee® M12TM batteries. Technical Specifications: Battery capacity: 2.0 Ah Battery type: Li-ion Included charger: 40 min Voltage: 12V Weight (with battery): 0.9 kg Handle circumference: 45 mm Head profile: 20 mm Length: 274 mm Max. torque: 47 Nm No-load speed: 0 - 250 rpm Number of batteries included: 1 Sound pressure level: 72 dB (A) Sound pressure level uncertainty: 3 dB(A) Supplied in: tool bag Vibration (screwdriving): ..