Filter
Your Cart

Accessories for angle grinder

Angle Grinder Nut - For securing discs, ..
Quick-release nut for angle grinders - q..
Angle Grinder Stand for Controlled and P..
Brand: Makita Stock: In Stock
Makita Carbon Brushes CB-459, 195026-6DescriptionThe Makita CB-459 (Part No. 195026-6) is a genuine set of carbon brushes designed for servicing and maintaining compatible Makita power tools. They restore proper electrical contact between the motor and armature, ensuring reliable performance and extending the service life of the tool. The brush set is compatible with selected Makita models, including GA4530, GA5030, and PJ7000, providing precise fit and dependable operation. Using genuine Makita replacement parts helps maintain the original performance and reliability of the power tool. The Makita CB-459 (195026-6) is an ideal replacement for professional repair technicians and users who want to keep their Makita tools operating at peak performance.Technical Specifications Brand: Makita Model: CB-459 Type: Carbon brushes Application: Replacement part for power tools Compatible models: Makita GA4530, GA5030, PJ7000, and other compatible models Part type: Genuine replacement part Package Includes 2 x Makita CB-459 Carbon Brushes..
2.27€
Ex Tax:1.89€
Add to Cart
Brand: Black and Decker Stock: In Stock
Gear Set for Black+Decker CD500 Angle Grinder, 661243-00DescriptionThe Black+Decker 661243-00 is an original gear set designed as a replacement part for the Black+Decker CD500 angle grinder. It transfers power from the motor to the spindle and is intended to replace worn or damaged gears, restoring the tool's proper operation. Manufactured to original Black+Decker specifications, the gear set ensures precise fit, reliable performance, and full compatibility with the designated model. It is ideal for servicing, maintenance, and repair of compatible angle grinders.Technical Specifications Brand: Black+Decker Type: Gear set Application: Replacement part for angle grinder Compatible model: Black+Decker CD500 Material: Hardened steel Purpose: Replacement of worn or damaged gears Package Includes 1 set of Black+Decker 661243-00 gears..
-20%
9.52€ 11.96€
Ex Tax:7.93€
Add to Cart
Brand: Dewalt Stock: In Stock
DeWALT DT70518T-QZ EXTREME Impact Torsion Bit Set with Magnetic Bit Holder, 10 PiecesDescriptionThe DeWALT DT70518T-QZ is a 10-piece screwdriver bit set from the EXTREME Impact Torsion range, designed for use with cordless drills and impact drivers. The set includes a magnetic pivoting bit holder and nine 25 mm impact torsion bits, making it ideal for demanding fastening applications. The standout feature is the pivoting magnetic bit holder, which allows up to 20° of movement for improved access when driving screws in confined or awkward spaces. The magnetic holder securely retains both the bit and screw, providing greater control and accuracy. The included EXTREME Impact Torsion bits are engineered to withstand high torque applications. Their torsion zone helps absorb impact forces, reducing stress on the bit tip and extending service life when used with impact drivers.Technical Specifications Brand: DeWALT Model: DT70518T-QZ Series: EXTREME Impact Torsion Type: Screwdriver bit set with magnetic bit holder Number of pieces: 10 Number of bits: 9 Bit length: 25 mm Shank: 1/4" Hex Magnetic bit holder: Yes Maximum pivot angle: Up to 20° Application: Screwdriving with drills and impact drivers Package Includes 1 x Magnetic pivoting bit holder (up to 20°) 9 x EXTREME Impact Torsion screwdriver bits, 25 mm..
-20%
10.22€ 12.78€
Ex Tax:8.52€
Add to Cart
Brand: Bosch Stock: In Stock
Bosch PRO Metal Clean Cup Brush, 75 mm, M10 A cup brush for angle grinders, 75 mm in diameter with 0.30 mm crimped brass-coated wire. It screws straight onto an M10 spindle. Maximum speed is 12,500 min-1. Crimped, not knotted wire Crimped wire is softer than knotted - it works more gently on the substrate and suits cleaning rather than heavy removal. The brass coating reduces sparking and helps on softer metals. Which machine The brush is for angle grinders of 100 mm minimum diameter with an M10 spindle thread. Important: most angle grinders have an M14 thread - check your machine's spindle before ordering. Safety The product carries EN 1083-2 marking. Do not exceed the maximum 12,500 min-1 - a brush run above its rated speed sheds wires. What is in the delivery 1 x Bosch 2 608 622 062 cup brush No adapters or spanners - the brush screws directly onto the spindle. Technical specifications Article number2 608 622 062 EAN3165140102704 RangePRO Metal Clean Diameter75 mm Wire diameter0.30 mm Wire typecrimped, brass coated ThreadM10 Max. speed12,500 min-1 For grinders from100 mm StandardEN 1083-2 Pack quantity1 pc OriginChina Questions and Answers What is the thread? M10. NOTE: most angle grinders use an M14 thread - check your machine's spindle before ordering. A brush with the wrong thread will not fit. What wire is it? 0.30 mm crimped wire with a brass coating. A description of "steel wire" is not accurate - the coating is brass, visible in the golden colour. What is the difference between crimped and knotted wire? Crimped is softer and works more gently - for cleaning rust, scale and old coatings. Knotted is aggressive and removes material. What is the maximum speed? 12,500 rpm. Do not exceed it - a brush run above its rated speed begins to shed wires. Which machine is it for? Angle grinders of 100 mm minimum diameter with an M10 spindle. Is an adapter needed? No. The brush screws directly onto the spindle - no adapters or spanners are supplied or needed. Is there a standard? Yes, EN 1083-2 - the European standard for wire brushes, marked on the product itself. ..
18.37€
Ex Tax:15.31€
Add to Cart
Brand: Bosch Stock: In Stock
Bosch Angle Grinder Guard Ø125 mm, article 1 600 A02 5XR A genuine Bosch protective guard for angle grinders taking a Ø125 mm disc. A service spare part, position 651 in the exploded diagram. Pressed steel with a silver finish and a coded toothed collar. The size is 125 mm - check your machine This is the critical point when ordering. The guard is only for machines with a 125 mm disc. It does not fit 115 mm, and it does not fit 230 mm. The diameter is on the part itself - the factory label in the photograph reads "Ø125". For GRINDING, not cutting The factory label carries a crossed-out cutting disc pictogram. This is a grinding guard - open at the bottom, with no closing plate. Cutting calls for a different guard, closed, which directs sparks and debris downwards. If you work with a diamond or cut-off wheel, this is not the right article. Which machines it fits Confirmed models: GWS 8-125, GWS 10-125, GWS 11-125 CI / CIH, GWS 12-125 / 12-125 S / 12-125 CIPX, GWS 13-125 CIE, GWS 14-125 CI / CIE, GWS 15-125 CIE / CIEH / CIPX / CIH, GWS 17-125 CI / CIE, GWS 18-125 PL INOX, GWS 19-125 CIE, GWS 1000, GWS 1100, GWS 1400, GWS 18V-10 / 18V-10 C / 18V-10P, GWX 9-125 S, GWX 750-125, GWX 19-125 S, GWX 180-LI, GWX 18V-7, GWX 18V-10P, GWX 18V-10 PSC, BAG 125-1. The PWS range is not confirmed. No catalogue or service list shows this number against a PWS machine. The green DIY range uses different guards. If your machine is a PWS, check the number against your own model's diagram before ordering. Previous article number This article supersedes 1600A00XK9. If you are searching by the old number, this is the same part. It is also written 1 600 A02 5XR and 1600A025XR-B17. What we do not publish Bosch does not list this number in its general catalogue - it lives only in the service parts lists. So there is no official EAN for it and no published collar diameter. We do not invent them. The clamping method (screw or keyless) is likewise not separately confirmed for this number - match it against the guard you are removing. What is in the delivery 1 x Bosch Ø125 mm protective guard, article 1600A025XR A single part. No screws, no clamps and no machine. Technical specifications Typeprotective guard for angle grinders Article number1600A025XR (written commercially 1 600 A02 5XR) Previous article number1600A00XK9 Also written1600A025XR-B17 Disc diameter125 mm Usegrinding - NOT cutting Position in the exploded diagram651 Materialpressed steel, silver finish Mountingcoded toothed collar Compatible rangesBosch GWS and GWX (incl. X-LOCK) PWS rangenot confirmed EANnot published by the manufacturer Collar diameternot published by the manufacturer Scope1 pc, no screws or clamps Questions and Answers What disc diameter is it for? 125 mm. The diameter is on the factory label on the part itself - the photograph shows "Ø125". It does NOT fit 115 mm or 230 mm machines. Can it be used for cutting? No. The label carries a crossed-out cutting disc pictogram. This is a grinding guard, open at the bottom. Cutting calls for a closed guard that directs sparks and debris downwards. Which machines does it fit? Bosch GWS and GWX angle grinders with a 125 mm disc - for example the GWS 14-125 CI, GWS 17-125 CIE, GWS 18V-10, GWX 19-125 S and GWX 18V-10 PSC. The full list is in the description. Does it fit a PWS? Not confirmed. No service list shows this number against a PWS machine - the green DIY range uses different guards. Check the number against your own model's diagram. What is the old number? 1600A00XK9. This article supersedes it - the same part with a new number. Why is there no EAN? Bosch does not publish this number in its general catalogue - it is a service number and appears only in spare parts lists. No official EAN exists for it. Barcodes seen at some retailers are their own. Are screws included? No. The guard only is supplied, 1 piece. Clamping hardware is taken from the old guard or ordered separately from the machine's diagram. ..
7.56€
Ex Tax:6.30€
Add to Cart
Brand: Makita Stock: In Stock
Makita Telescopic Extension Handle, 1915N6-8DescriptionThe Makita 1915N6-8 is a genuine telescopic extension handle designed to improve the comfort and control of compatible Makita cordless tools. Its adjustable design allows users to work in a more ergonomic upright position, helping to reduce fatigue during extended use. Designed specifically for selected models in the Makita TR001G, DTR, and DUR product ranges, the handle provides secure attachment and enhanced operator comfort. The telescopic mechanism allows the handle length to be adjusted according to the user and the application. The Makita 1915N6-8 is an ideal accessory for professionals seeking improved ergonomics and greater convenience when using compatible Makita tools.Technical Specifications Brand: Makita Part Number: 1915N6-8 Type: Telescopic extension handle Design: Adjustable telescopic constructionOverall length: 175 mm Application: Extension and ergonomic handle for compatible tools Compatible series: Makita TR001G Makita DTR Makita DUR Mounting: Compatible Makita tools Package Includes 1 pc. Makita 1915N6-8 Telescopic Extension Handle..
229.00€
Ex Tax:190.83€
Add to Cart
Brand: Fervi Stock: In Stock
Fervi PPS150/29M14 Backing Pad, Ø150 mm, Velcro, M14 Fervi PPS150/29M14 is a polyurethane backing pad with a hook-and-loop face for an angle grinder or orbital sander. Diameter Ø150 mm, thickness 29 mm, thread M14, maximum speed 7000 rpm. EAN 8012667325756. What it does The pad is the carrier - it screws onto the machine's spindle and the abrasive discs stick to its hook-and-loop face. Without it an angle grinder can only cut and grind; with it, it becomes a sanding and polishing machine. The polyurethane The body is polyurethane, not rigid plastic. The difference shows immediately: polyurethane flexes slightly and follows the surface instead of working only on its edge. On a slightly domed or uneven substrate that is the difference between even sanding and the arc-shaped marks you then have to sand out again. The 7000 rpm limit 7000 rpm is the ceiling, and it matters: most 125 mm angle grinders run at 11000 rpm and above, so an ordinary grinder without speed control is not suitable. You need a machine with speed electronics - a polisher, or a grinder with a speed dial. The M14 thread M14 is the standard thread on European angle grinders from 115 mm upward. The pad screws straight on, with no adapter. Hand-tight is enough - in use the direction of rotation keeps tightening it. Ø150 or Ø125 Fervi offers the same pad in Ø125 mm (PPS125/27M14, 8000 rpm). Choose by the abrasive discs you work with, not by the machine: a 150 mm disc on a 125 mm pad overhangs the rim and tears. Dry use The pad is for dry sanding. The hook-and-loop face and the adhesive beneath it do not tolerate water - wet use lifts them and after a few cycles the discs stop holding. Technical specifications ManufacturerFervi ArticlePPS150/29M14 TypePolyurethane backing pad, hook-and-loop DiameterØ150 mm Thickness29 mm ThreadM14 Maximum speed7000 rpm ApplicationDry, angle grinder and orbital sander Weight0.17 kg EAN8012667325756 Questions and Answers What diameter is it? Ø150 mm, 29 mm thick. A Ø125 mm version also exists (PPS125/27M14). What thread does it have? M14 - the European standard from 115 mm grinders upward. It screws on directly, no adapter. Will it fit any angle grinder? No. The limit is 7000 rpm, while ordinary 125 mm grinders run at 11000 and above. You need a machine with speed control. How do the discs attach? To the hook-and-loop face. Discs press on and peel off by hand, no tool needed. Why polyurethane rather than plastic? Polyurethane flexes slightly and follows the surface instead of digging with its edge - no arc marks on uneven work. Can it be used wet? No. It is for dry sanding - water lifts the hook-and-loop face. What size discs should I buy? 150 mm. A larger disc overhangs the rim and tears. ..
22.38€
Ex Tax:18.65€
Add to Cart
Brand: Dewalt Stock: In Stock
DeWALT Magnetic Bit Holder N095778DescriptionThe DeWALT N095778 is an original magnetic bit holder designed as a replacement part for the DeWALT DCD720 cordless drill driver. It provides convenient storage and quick access to screwdriver bits while ensuring secure retention through its integrated magnetic system. Manufactured to original DeWALT specifications, this component is intended for direct replacement of worn, damaged, or missing parts. Its precise fit ensures proper installation and full compatibility with the designated tool model. It is ideal for maintenance, repair, and servicing of DeWALT DCD720 cordless tools.Technical Specifications Brand: DeWALT Type: Magnetic bit holder Application: Replacement part for cordless drill driver Compatible model: DeWALT DCD720 Material: Metal and plastic Magnetic retention: Yes Installation: Original factory replacement part Package Includes 1 pc. DeWALT N095778 Magnetic Bit Holder..
5.28€
Ex Tax:4.40€
Add to Cart
Brand: Milwaukee Stock: In Stock
Milwaukee's FIXTEC system for tool-free bit changes The quick-release nut is compatible with all angle grinders with an M14 thread..
-29%
11.76€ 16.45€
Ex Tax:9.80€
Add to Cart
Brand: Milwaukee Stock: Delivery in 1-3 days
Milwaukee Guide Rail Adapter, 4932493306 Milwaukee 4932493306 is an adapter connecting a router to a guide rail. It consists of a metal base that runs on the rail, two guide rods and two knobs for tool-free clamping. What it solves Freehand, a router follows the edge of the workpiece or a template. On a rail it follows a straight line set by the rail itself, whatever the edge happens to be. That is why the adapter is essential for long grooves, rebates and slots in the middle of a panel, where there is nothing to run against. The two rods The rods enter the router base and clamp. Two rather than one, because a single rod lets the machine pivot around it and the cutter wander off the line. With two the angle is fixed and the cut stays parallel to the rail along its whole length. Tool-free clamping Both screws have large hand knobs. Setting the distance to the rail is done repeatedly until the cut lands exactly right - with a spanner that would take several times longer and would almost certainly end in working by eye. Check the rail and the machine Rail adapters are not universal: the shoe is profiled for one rail system and the rods are sized for one router base. Before ordering, check article 4932493306 against both your machine and the rail you use. Set up before cutting Make the first cut on an offcut. The distance from the rail edge to the cutter axis depends on cutter diameter, and cutters get changed - so the setting does not carry over between jobs. Once found, write it down rather than remember it. Maintenance Keep the rods clean and lightly oiled. Wood dust on them makes the travel jerky, and jerky travel shows in the cut as ripples. Oil thinly - a heavy film collects dust and makes matters worse. Technical specifications ManufacturerMilwaukee Article4932493306 TypeGuide rail adapter For machineCordless router Guide rods2 ClampingTwo hand knobs, tool-free ApplicationStraight grooves, rebates and slots along a rail NoteRail adapters are not universal - check against your machine and rail Questions and Answers What is the adapter for? It connects a router to a guide rail so the machine runs on a straight line rather than along the workpiece edge. Why two rods? With one the machine can pivot around it and the cutter leaves the line. Two fix the angle. Are tools needed to fit it? No. Both screws have hand knobs. Does it fit any rail? No. Adapters are not universal - check article 4932493306 against your machine and rail. When is it essential? For grooves and slots in the middle of a panel, where there is no edge to guide against. Is a test cut needed? Yes - the distance to the rail depends on cutter diameter and is checked on an offcut. How is it maintained? Keep the rods clean and lightly oiled; dust on them shows in the cut as ripples. ..
122.39€
Ex Tax:101.99€
Add to Cart
Brand: Bosch Stock: Delivery in 1-3 days
Bosch Power Supply Cord 4.15 m, 2 x 1.0 mm², 1607000392DescriptionBosch 1607000392 is a genuine replacement power supply cord designed for compatible Bosch Professional power tools. It is intended to replace a damaged or worn original power cable and restore the electrical connection of the tool. Bosch officially specifies the part as an EU 4.15M 2 x 1.0MM H07 RN-F power supply cord. It has a length of 4.15 metres and two conductors with a cross-sectional area of 1.0 mm² each. In Bosch spare-parts diagrams, the cable is typically identified as position 805. Part number 1 607 000 392 is used with a wide range of Bosch Professional tools, including numerous GWS angle grinders. Compatibility should always be checked against the complete Bosch tool type number before ordering.Technical Specifications Brand: Bosch Professional Type: Replacement power supply cord Version: EU Length: 4.15 m Cable Type: H07RN-F Conductors: 2 Cross Section: 2 x 1.0 mm² Spare Parts Diagram Position: 805 Application: Compatible Bosch Professional power tools Compatibility: Selected Bosch GWS angle grinders and other compatible tools Package Includes 1 x Bosch 1607000392 Power Supply Cord, 4.15 m, 2 x 1.0 mm²..
23.89€
Ex Tax:19.91€
Add to Cart
Showing 1 to 11 of 11 (1 Pages)
Accessories for angle grinder

Accessories for angle grinder

Angle grinder accessories for cutting, grinding, and finishing

Angle grinder accessories are essential when working with metal, stainless steel, stone, concrete, ceramics, wood, and composite materials. They expand the machine's capabilities, turning it into a tool for cutting, deburring, smoothing, polishing, rust removal, weld preparation, and repair work. The right consumable protects the motor from overload, reduces vibrations, and helps achieve a cleaner finish for both professional and DIY projects.

Toolsbox.bg offers a variety of accessories for angle grinders with small and large disc diameters. These include cutting and grinding discs, diamond discs, flap discs, wire brushes, polishing attachments, backing pads, nuts, safety elements, and additional mounting accessories. When selecting accessories, consider the machine size, disc bore, material to be processed, permissible RPM, and type of work.

Main types of accessories for angle grinders

The angle grinder works with various consumables that are changed depending on the task. Cutting discs are thin and are used for precise cutting of metal profiles, sheet metal, pipes, rebar, or tiles. Grinding discs are thicker and are used for removing material, shaping edges, and processing weld seams. Flap discs are valued for smoother grinding because the abrasive flaps remove material in a controlled manner and leave a finer surface.

Diamond discs are designed for mineral materials such as concrete, brick, porcelain tile, stone, and roof tiles. They differ by segment, diamond layer height, and cutting type. The continuous edge is used for a smoother cut, while the segmented edge works well on rough construction materials. The turbo profile combines speed and a cleaner cut, making it a practical choice for installation and repair work.

Wire brushes, cup brushes, and wire discs are designed for removing rust, paint, weld slag, and contaminants from metal surfaces. For finishing operations, polishing pads, felt discs, sponges, and Velcro-backed pads are used. They assist with fine smoothing, refreshing surfaces, and preparation before painting or varnishing.

Criteria for selecting angle grinder accessories

The first parameter is the diameter. The most common accessories are for 115 mm, 125 mm, 150 mm, 180 mm, and 230 mm angle grinders. Small machines are used for one-handed operation, installations, cutting thin parts, and finishing operations. Larger angle grinders handle deeper cuts and heavier construction tasks. A disc with the wrong diameter should not be installed, as it affects the guard, the speed, and safe operation.

The second parameter is the mounting hole. On most angle grinders, the standard hole is 22.23 mm, but always check the specifications of the machine and the corresponding accessory. The maximum speed, marked on the disc or attachment, is also important. Operating above the specified maximum carries the risk of consumable failure, strong vibrations, and damage to the power tool.

The material being processed determines the type of abrasive. For ferrous metals, use steel discs; for stainless steel parts, choose options free of iron, sulfur, and chlorine in their composition when a clean cut without surface contamination is required. Diamond discs are used for concrete, stone, and tiles. For wood, select only attachments designed for angle grinders and designated by the manufacturer for such work.

Quick guide by type of work

Type of accessoryTaskSelection criteria
Cutting discsCutting metal, profiles, pipes, sheet metalDiameter, thickness, bore, material, permissible speed
Diamond bladesCutting concrete, stone, brick, ceramicsEdge type, cutting depth, dry or wet cutting
Grinding discsRough removal, shaping, weldsThickness, hardness, material compatibility
Flap discsSmoothing, chamfering, surface preparationGrit size, backing, diameter
Wire brushesRemoval of rust, paint, and carbon depositsShape, wire thickness, thread or hole

Compatibility, safe operation, and maintenance

Compatibility between the machine and the accessory is checked based on several criteria: diameter, mounting hole, thread, thickness, permissible speed, and mounting type. For threaded brushes, check the spindle size, typically M14 on many angle grinders. For pads and attachments with a Velcro base, check the diameter and permissible rotational speed. For nuts and flanges, ensure a tight fit with no play or uneven tightening.

Safety depends on the condition of the accessory and proper installation. Do not use a cracked, damp, deformed, or worn disc. For diamond discs, follow the rotation direction indicated on the marking. The guard must remain in place, and safety goggles, gloves, ear protection, and a dust mask are essential when working with an angle grinder. Apply pressure to the machine gradually, as excessive pressure heats the disc and shortens its service life.

Proper storage extends the shelf life of abrasive consumables. Discs should be kept dry, upright, or on a flat surface, away from impacts and chemicals. Wire brushes should be protected from deformation, and polishing pads from dust and oil. After use, clean the flanges, nut, and spindle of chips and abrasive dust to ensure a secure fit.

Accessories for professional and home use

Construction crews, service shops, installers, and metalworking shops require consumables with the correct size, load-bearing capacity, and clear labeling. For home repairs, 125 mm discs, cutting and grinding sets, wire brushes for cleaning, and polishing attachments for finishing work are most commonly sought after. For a variety of tasks, it's practical to keep several types of discs on hand, because a single consumable rarely covers all materials without compromising the result.

Browse the angle grinder accessories at Toolsbox.bg and select consumables and accessories tailored to your machine, the material being worked on, and the required precision of the job.

Product Filter