Filter
Your Cart

Specific hand tools - Page 6

Brand: PICA Stock: In Stock
Pica Dry 4071 Summer-Heat Refill Leads, Red and White, 10 Pieces 4071 is a case of refill leads for the Pica-Dry automatic pencil - ten leads of Ø2.8 mm, five red and five white. The pack labels them Sommer-Minen / Summer leads and carries the SUMMER HEAT mark: the compound is made to take warmth and stays stable up to 70 °C. What the summer compound is for Ordinary leads go soft in a warm van, in a metal case left in the sun or in a tool belt in August; they smear and make a mess. Pica's summer leads are made for exactly that - they hold their shape in the heat and mark cleanly on a surface the sun has warmed. What they write on The manufacturer gives them as suitable for most surfaces except glass-smooth and glossy ones. On concrete, brick, render, timber, plasterboard and rough metal the mark is clear; on glass, polished sheet and gloss panels it does not take properly. Why two colours Red reads on light timber, plasterboard and concrete; white reads on dark and damp surfaces where graphite disappears. The pair covers both cases without carrying a second case of leads. Loading them The case opens with the red PULL tab, and the leads come out one at a time without the rest spilling. They go into the Pica-Dry automatic pencil as its own instructions describe - the pencil takes Ø2.8 mm leads and works with the other refills in the same range. Technical specifications ManufacturerPica-Marker (Germany) Article number4071 RangePica-Dry, Summer-Heat Contents10 pieces - 5 red and 5 white DiameterØ2.8 mm Heat resistanceStable up to 70 °C SurfacesMost substrates, except glass-smooth and glossy PackagingPlastic case with a pull tab Barcode4262357553455 Questions and Answers How many leads are in the 4071 case? Ten: five red and five white, all Ø2.8 mm. What does Summer-Heat mean? It is Pica's summer compound - the leads stay stable up to 70 °C and do not soften in a hot van, case or tool belt. Which pencil are they for? For the Pica-Dry automatic pencil, which takes Ø2.8 mm leads. Do they write on glass and polished sheet? No. The manufacturer gives them for most surfaces except glass-smooth and glossy ones - on glass and gloss the mark does not take properly. When do I use the white lead and when the red? White reads on dark and damp substrates where graphite disappears; red reads on light timber, plasterboard and concrete. Is this the same as 6071 for the Pica BIG Dry? No. 6071 is the summer refill for the larger Pica BIG Dry with 2 x 5 mm leads. 4071 is for the thin round Ø2.8 mm leads of the Pica-Dry. How do the leads come out of the case? The case has a red PULL tab - pull it and the leads come out one at a time, without the rest spilling. ..
8.88€
Ex Tax:7.40€
Add to Cart
Brand: PICA Stock: In Stock
Refill Leads for Pica Dry, Water Jet Resistant, White, Ø2.8 mm - 4043 Pica Dry 4043 is a box of 10 white refill leads for the Pica Dry automatic deep hole pencil. The leads belong to the special water jet resistant range: they are permanent and, according to the manufacturer, ideal for wet cutting of tiles and stone. They are 2.8 mm in diameter and 125 mm long. Water jet resistant and permanent The marking withstands water, which makes it suitable for work where the material is cut wet. Pica describes these leads as water-resistant and versatile and states that they are chloride-free. The manufacturer warns to protect the leads from temperatures above 40 °C - this is also printed on the pack itself. Ready to use The leads come already sharpened, in a convenient and sturdy plastic box. To protect the pencil's mechanism, Pica recommends always inserting the refills into the Pica Dry from the rear. Surfaces The manufacturer lists tiles, glass, metal, plastic, brick, wood, leather, rubber and wet rubber as suitable surfaces. Where they work best In its earlier product sheet Pica rates materials with up to three stars. These leads are ideal (3 stars) for stainless steel, stone and concrete, metal, processed wood, plastic, glass, tiles and ceramics. They are suitable (2 stars) for dry and wet rubber and for leather. Variants in the range The water jet resistant special leads for Pica Dry come in boxes of 10 in blue (4041), green (4042) and white (4043), plus the 4040 colour mix with 8 leads - 3 green, 2 white and 3 blue. This page is for the white leads 4043. Other refills for Pica Dry Besides the water jet resistant leads, the manufacturer's comparison table for Pica Dry also lists water-soluble Multi-Use leads with 2B graphite, carpenter leads with H graphite and heat-resistant Summer Heat leads with 2B graphite. The choice depends on the material and on whether the marking has to withstand water. Technical specifications ManufacturerPica-Marker (PICA) Article4043 EAN4260056150579 TypeSpecial refill leads, water jet resistant For pencilPica Dry ColourWhite Quantity10 leads Diameter2.8 mm Length125 mm PropertiesPermanent, water jet resistant, chloride-free, already sharpened Intended useWet cutting of tiles and stone LimitationProtect from temperatures above 40 °C SurfacesTiles, glass, metal, plastic, brick, wood, leather, rubber, wet rubber PackagingPlastic box Questions and Answers Which pencil are these leads for? For the Pica Dry automatic deep hole pencil. The leads are 2.8 mm in diameter and 125 mm long. How many leads are in the pack? The 4043 box contains 10 white leads. The range also includes boxes of 10 in blue (4041) and green (4042), plus the 4040 mix with 8 leads. Do they wash off during wet cutting? No - the leads are permanent and water jet resistant. The manufacturer recommends them precisely for wet cutting of tiles and stone. Is there a temperature limit? Yes. Pica warns to protect the leads from temperatures above 40 °C; the warning is also printed on the pack. Do they need sharpening before use? No, according to the manufacturer the leads come already sharpened, in a sturdy plastic box. How are they inserted into the pencil? Pica recommends always inserting the refills into the pencil from the rear to protect the mechanism. Which surfaces do they mark? The manufacturer lists tiles, glass, metal, plastic, brick, wood, leather, rubber and wet rubber. The leads are chloride-free. ..
10.99€
Ex Tax:9.16€
Add to Cart
Brand: PICA Stock: In Stock
Pica Fine Dry Refill Leads, Red, 12 pcs - 7031 Pica 7031 is a tube of 12 red refill leads with a diameter of 0.9 mm for the Pica Fine Dry automatic pencil. The manufacturer offers the red and white Fine Dry leads for the best contrast on dark surfaces. Fine and precise marking Fine Dry refill leads are made for fine and precise marking. They are 60 mm long. Pica states that they are not suitable for glass-smooth, shiny surfaces, so on such materials another marker is the better choice. Tube with rotating lid The leads come in a tube with a rotating lid that allows quick removal of a lead. The label shows the colour, the Pica Fine Dry 0.9 pencil and the quantity - 12 leads, in several languages. The Pica Fine Dry pencil Pica Fine Dry (article 7070) is Pica's automatic pencil with a 0.9 mm lead - the Longlife Automatic Pencil 0.9. The manufacturer lists the graphite refills 7030 and 7050 for most surfaces, and the red and white ones for dark surfaces where a graphite line is hard to see. Leads for Fine Dry For light surfaces such as wood, plastic or metal Pica offers graphite refills HB (7030) and H (7050) in packs of 24, and for dark surfaces red (7031) and white (7032) in packs of 12. All versions are also available in a self-service bag (SB). The 0.9 mm leads are for Fine Dry only: the Pica Dry pencil uses 2.8 mm leads and BIG Dry uses rectangular 2 x 5 mm leads. Technical specifications ManufacturerPica-Marker Article7031 RangePica Fine Dry TypeRefill leads CompatibilityPica Fine Dry 0.9 mm ColourRed Diameter0.9 mm Length60 mm Quantity12 Suited toDark surfaces Not suited toGlass-smooth, shiny surfaces PackTube with rotating lid Questions and Answers Which pencil are the leads for? The leads are for the Pica Fine Dry automatic pencil with 0.9 mm lead. How many leads are there and what size are they? The tube holds 12 red leads, 0.9 mm in diameter and 60 mm long. Why red leads? Pica offers the red and white Fine Dry leads for the best contrast on dark surfaces. For light surfaces there are the graphite HB and H leads. Do they write on glass or shiny surfaces? The manufacturer states that Fine Dry leads are not suitable for glass-smooth, shiny surfaces. Which other leads are there for Fine Dry? Graphite HB (7030) and H (7050) in packs of 24, and white (7032) in packs of 12. All are also available in a self-service bag. How is a lead taken out of the pack? The tube has a rotating lid which, according to Pica, allows quick removal of a lead. Do they fit Pica Dry or BIG Dry? No. The 0.9 mm leads are for Fine Dry, while Pica Dry uses 2.8 mm leads and BIG Dry uses rectangular 2 x 5 mm leads. ..
-12%
4.50€ 5.11€
Ex Tax:3.75€
Add to Cart
Brand: PICA Stock: In Stock
Refill Leads for Pica Fine Dry, White, Ø0.9 mm, 12 Pieces - 7032 Pica 7032 is a box of 12 white refill leads for the Pica Fine Dry automatic pencil. The leads are 0.9 mm in diameter and 60 mm long and are intended for fine and precise marking. The white colour is for dark surfaces - the manufacturer introduces the coloured leads as new for best contrast on dark materials. Box with a rotating lid The leads come in a box with a rotating lid that, according to the manufacturer, allows quick removal. The box is printed with the colour (White), the model Pica Fine Dry 0.9 and the count - 12 leads. Limitations Pica states that Fine Dry refills are not suitable for glass-smooth, shiny surfaces. According to the manufacturer all Fine Dry refills are temperature-resistant up to 70 °C. Inserting into the pencil To protect the mechanism, the manufacturer recommends always inserting the refills from the rear. About the Pica Fine Dry The Pica Fine Dry (art. 7070) is an automatic pencil with a 0.9 mm lead for precise marking without sharpening. It has a push mechanism for automatic lead feed in a stainless steel tube, a large integrated eraser, an ergonomic grip zone, a holster with a special clip for one-hand operation and effective dust and moisture protection. The pencil comes with 5 HB graphite leads. Other refills for Fine Dry For light-coloured surfaces such as wood, plastic or metal the manufacturer offers HB (7030) and H (7050) graphite leads in packs of 24, and for dark surfaces coloured red (7031) and white (7032) leads in packs of 12. All versions are also available in self-service bags - the white ones as 7032/SB. Technical specifications ManufacturerPica-Marker (PICA) Article7032 TypeColoured refill leads For pencilPica Fine Dry (art. 7070) ColourWhite Quantity12 leads Diameter0.9 mm Length60 mm Intended useDark surfaces, fine and precise marking Temperature resistanceUp to 70 °C LimitationNot suitable for glass-smooth, shiny surfaces PackagingBox with rotating lid Questions and Answers Which pencil are these leads for? For the Pica Fine Dry automatic pencil (art. 7070). The leads are 0.9 mm in diameter and 60 mm long. How many leads are in the box? 12 white leads. The HB (7030) and H (7050) graphite leads for the Fine Dry come in packs of 24, the coloured red (7031) and white (7032) leads in packs of 12. Which surfaces are the white leads for? The manufacturer intends them for dark surfaces, where they give the best contrast. For light surfaces such as wood, plastic or metal Pica recommends the HB and H graphite leads. Do they mark glass-smooth, shiny surfaces? No. Pica states that Fine Dry refills are not suitable for glass-smooth, shiny surfaces. Do they withstand high temperatures? According to the manufacturer all Fine Dry refills are temperature-resistant up to 70 °C. How are they inserted into the pencil? The manufacturer recommends always inserting the leads into the pencil from the rear to protect the mechanism. Is there a blister or bag version? Yes, Pica offers all Fine Dry refills in self-service bags as well; the white leads are article 7032/SB. ..
-12%
4.50€ 5.11€
Ex Tax:3.75€
Add to Cart
Brand: PICA Stock: In Stock
Pica VISOR permanent Marker, Blue - 990/41 Pica VISOR permanent 990/41 is a refillable industrial marker with a blue marking lead, a twist mechanism and a side holster with clip. The manufacturer Pica-Marker describes it as particularly suited to rough or wet surfaces outdoors: thanks to the high contrast, markings do not fade even in bad weather, and the lead never dries out. The photo shows the marker in its holster and without it. Mechanism and holster The lead is advanced by a patented twist mechanism, and the holster with clip allows one-handed operation. Pica highlights the quality of workmanship and mechanics, the ergonomic grip zone and the long service life. Because it is refillable, according to the manufacturer one lead replaces up to 5 conventional ink or paint markers. The marking lead The lead has a diameter of 10 mm and a length of 85 mm. The manufacturer describes it as a waterproof marking crayon, extremely hard-wearing and suited to outdoor work. The lead temperature should not exceed 40 °C. The blue lead is chloride-free - Pica names it, together with the white and black, as suitable for marking stainless steel. Refilling Pica VISOR permanent refill leads are sold separately in 7 colours. For the blue marker the manufacturer offers the 991/41 refill leads. Surfaces and colours Pica lists metal, rubber, wet rubber, plastic, tiles, glass, wet wood, brick and leather as suitable. In its earlier product sheet the manufacturer rates the marker as ideal for metal, processed wood, plastic, glass, tiles and ceramics and for dry and wet rubber, and as suitable for stone and concrete, raw wood and leather. VISOR permanent is made in seven colours: red (990/40), green (990/36), blue (990/41), yellow (990/44), black (990/46), white (990/52) and orange (990/054). Technical specifications ManufacturerPica-Marker Article990/41 RangePica VISOR permanent TypeRefillable permanent industrial marker Lead colourBlue Lead diameter10 mm Lead length85 mm MechanismPatented twist mechanism HolsterSide holster with clip Chloride-freeYes (manufacturer's data) Lead temperatureNot above 40 °C Refill leads991/41 SurfacesMetal, rubber, wet rubber, plastic, tiles, glass, wet wood, brick, leather Manufacturer's pack5 pieces Questions and Answers How is the marker refilled? The marker is designed to be refilled with Pica VISOR permanent replacement leads. For this colour the manufacturer offers the 991/41 refill leads, sold separately. Does the lead dry out if the marker is left open? No. The manufacturer states that the VISOR permanent lead never dries out and the marker is ready to work from the first to the last line. Is it suitable for marking stainless steel? Yes. Pica names the blue, white and black leads as chloride-free and suitable for marking stainless steel, and this marker is blue. Can it be used outdoors and on wet surfaces? Yes, Pica describes the marker as particularly suited to rough or wet surfaces outdoors. The lead is a waterproof marking crayon, and markings do not fade even in bad weather. What are the lead dimensions? The lead has a diameter of 10 mm and a length of 85 mm, according to the manufacturer. Is there a temperature limit? The manufacturer states that the lead temperature should not exceed 40 °C. The marker should therefore not be left in very hot places. Which colours does VISOR permanent come in? Seven colours: red 990/40, green 990/36, blue 990/41, yellow 990/44, black 990/46, white 990/52 and orange 990/054. This item is the blue marker. ..
-10%
9.50€ 10.54€
Ex Tax:7.92€
Add to Cart
Brand: PICA Stock: In Stock
Pica VISOR permanent Marker, White - 990/52 Pica VISOR permanent 990/52 is a refillable industrial marker with a white marking lead, a twist mechanism and a side holster with clip. The manufacturer Pica-Marker describes it as particularly suited to rough or wet surfaces outdoors: thanks to the high contrast, markings do not fade even in bad weather, and the lead never dries out. The photo shows the marker in its holster and without it. Mechanism and holster The lead is advanced by a patented twist mechanism, and the holster with clip allows one-handed operation. Pica highlights the quality of workmanship and mechanics, the ergonomic grip zone and the long service life. Because it is refillable, according to the manufacturer one lead replaces up to 5 conventional ink or paint markers. The marking lead The lead has a diameter of 10 mm and a length of 85 mm. The manufacturer describes it as a waterproof marking crayon, extremely hard-wearing and suited to outdoor work. The lead temperature should not exceed 40 °C. The white lead is chloride-free - Pica names it, together with the blue and black, as suitable for marking stainless steel. Refilling Pica VISOR permanent refill leads are sold separately in 7 colours. For the white marker the manufacturer offers the 991/52 refill leads. Surfaces and colours Pica lists metal, rubber, wet rubber, plastic, tiles, glass, wet wood, brick and leather as suitable. In its earlier product sheet the manufacturer rates the marker as ideal for metal, processed wood, plastic, glass, tiles and ceramics and for dry and wet rubber, and as suitable for stone and concrete, raw wood and leather. VISOR permanent is made in seven colours: red (990/40), green (990/36), blue (990/41), yellow (990/44), black (990/46), white (990/52) and orange (990/054). Technical specifications ManufacturerPica-Marker Article990/52 RangePica VISOR permanent TypeRefillable permanent industrial marker Lead colourWhite Lead diameter10 mm Lead length85 mm MechanismPatented twist mechanism HolsterSide holster with clip Chloride-freeYes (manufacturer's data) Lead temperatureNot above 40 °C Refill leads991/52 SurfacesMetal, rubber, wet rubber, plastic, tiles, glass, wet wood, brick, leather Manufacturer's pack5 pieces Questions and Answers How is the marker refilled? The marker is designed to be refilled with Pica VISOR permanent replacement leads. For this colour the manufacturer offers the 991/52 refill leads, sold separately. Does the lead dry out if the marker is left open? No. The manufacturer states that the VISOR permanent lead never dries out and the marker is ready to work from the first to the last line. Is it suitable for marking stainless steel? Yes. Pica names the blue, white and black leads as chloride-free and suitable for marking stainless steel, and this marker is white. Can it be used outdoors and on wet surfaces? Yes, Pica describes the marker as particularly suited to rough or wet surfaces outdoors. The lead is a waterproof marking crayon, and markings do not fade even in bad weather. What are the lead dimensions? The lead has a diameter of 10 mm and a length of 85 mm, according to the manufacturer. Is there a temperature limit? The manufacturer states that the lead temperature should not exceed 40 °C. The marker should therefore not be left in very hot places. Which colours does VISOR permanent come in? Seven colours: red 990/40, green 990/36, blue 990/41, yellow 990/44, black 990/46, white 990/52 and orange 990/054. This item is the white marker. ..
-10%
9.50€ 10.54€
Ex Tax:7.92€
Add to Cart
Brand: PICA Stock: In Stock
Pica VISOR permanent Marker, Yellow - 990/44 Pica VISOR permanent 990/44 is a refillable industrial marker with a yellow marking lead, a twist mechanism and a side holster with clip. The manufacturer Pica-Marker describes it as particularly suited to rough or wet surfaces outdoors: thanks to the high contrast, markings do not fade even in bad weather, and the lead never dries out. The photo shows the marker in its holster and without it. Mechanism and holster The lead is advanced by a patented twist mechanism, and the holster with clip allows one-handed operation. Pica highlights the quality of workmanship and mechanics, the ergonomic grip zone and the long service life. Because it is refillable, according to the manufacturer one lead replaces up to 5 conventional ink or paint markers. The marking lead The lead has a diameter of 10 mm and a length of 85 mm. The manufacturer describes it as a waterproof marking crayon, extremely hard-wearing and suited to outdoor work. The lead temperature should not exceed 40 °C. For marking stainless steel Pica names the blue, white and black leads as chloride-free - yellow is not among them. Refilling Pica VISOR permanent refill leads are sold separately in 7 colours. For the yellow marker the manufacturer offers the 991/44 refill leads. Surfaces and colours Pica lists metal, rubber, wet rubber, plastic, tiles, glass, wet wood, brick and leather as suitable. In its earlier product sheet the manufacturer rates the marker as ideal for metal, processed wood, plastic, glass, tiles and ceramics and for dry and wet rubber, and as suitable for stone and concrete, raw wood and leather. VISOR permanent is made in seven colours: red (990/40), green (990/36), blue (990/41), yellow (990/44), black (990/46), white (990/52) and orange (990/054). Technical specifications ManufacturerPica-Marker Article990/44 RangePica VISOR permanent TypeRefillable permanent industrial marker Lead colourYellow Lead diameter10 mm Lead length85 mm MechanismPatented twist mechanism HolsterSide holster with clip Chloride-freeNot stated by the manufacturer Lead temperatureNot above 40 °C Refill leads991/44 SurfacesMetal, rubber, wet rubber, plastic, tiles, glass, wet wood, brick, leather Manufacturer's pack5 pieces Questions and Answers How is the marker refilled? The marker is designed to be refilled with Pica VISOR permanent replacement leads. For this colour the manufacturer offers the 991/44 refill leads, sold separately. Does the lead dry out if the marker is left open? No. The manufacturer states that the VISOR permanent lead never dries out and the marker is ready to work from the first to the last line. Is it suitable for marking stainless steel? Pica names only the blue, white and black leads as chloride-free and suitable for stainless steel. Yellow is not on that list, so for stainless steel choose one of those three colours. Can it be used outdoors and on wet surfaces? Yes, Pica describes the marker as particularly suited to rough or wet surfaces outdoors. The lead is a waterproof marking crayon, and markings do not fade even in bad weather. What are the lead dimensions? The lead has a diameter of 10 mm and a length of 85 mm, according to the manufacturer. Is there a temperature limit? The manufacturer states that the lead temperature should not exceed 40 °C. The marker should therefore not be left in very hot places. Which colours does VISOR permanent come in? Seven colours: red 990/40, green 990/36, blue 990/41, yellow 990/44, black 990/46, white 990/52 and orange 990/054. This item is the yellow marker. ..
-10%
9.50€ 10.54€
Ex Tax:7.92€
Add to Cart
Brand: Bosch Stock: In Stock
Bosch screwdriver identified by SKU 1600A03DT2. It is a Torx screwdriver with TX10 / T10 tip size and 75 mm length. The product is presented as Bosch hand tool TORX 10x75 mm and is suitable for tasks that require a Torx-profile screwdriver. No additional accessories or package contents are specified in the provided product information...
-18%
4.36€ 5.32€
Ex Tax:3.63€
Add to Cart
Brand: WERA Stock: In Stock
WERA Kraftform Kompakt VDE Handle for Interchangeable Blades, 05003990001DescriptionThe WERA 05003990001 is a genuine Kraftform Kompakt VDE handle designed for use with interchangeable WERA VDE insulated blades. It allows quick blade changes while providing the safety and flexibility required for professional electrical installation and maintenance work. Certified for work on live equipment up to 1000 V according to IEC 60900, each handle is individually tested for electrical safety. The ergonomic Kraftform grip delivers excellent comfort, secure handling, and efficient torque transfer during prolonged use. The 05003990001 is supplied as a handle only and is compatible with WERA Kraftform Kompakt VDE interchangeable blades.Technical Specifications Brand: WERA Type: VDE handle for interchangeable blades Series: Kraftform Kompakt VDE Insulation: Up to 1000 V Standard: IEC 60900 Handle dimensions: 9 x 98 mm Compatibility: WERA Kraftform Kompakt VDE interchangeable blades Handle material: Multi-component Kraftform grip Application: Electrical installation and maintenance Package Includes 1 x WERA Kraftform Kompakt VDE Handle Interchangeable blades not included..
-29%
18.90€ 26.59€
Ex Tax:15.75€
Add to Cart
Scriber Block for Parallel Lines - Pica Scriber Block, for Pica Dry and Pica Fine Dry, 9-25 mm, 55805 Scriber Block for Parallel Lines - Pica Scriber Block, for Pica Dry and Pica Fine Dry, 9-25 mm, 55805
Second hand Label BLACK FRIDAY -30%
Brand: PICA Stock: In Stock
Scriber Block for Parallel Lines Pica Scriber Block - 55805 Pica Scriber Block 55805 is an accessory for the Pica Dry and Pica Fine Dry automatic pencils that lets you draw parallel lines at a fixed distance from the wall. The manufacturer describes it as a tool for accurate fitting work that is faster, safer and more precise than freehand drawing, while remaining compact and handy for everyday use. 8 distances from 9 to 25 mm The block offers 8 distance settings in the range from 9 to 25 mm. The manufacturer's official images show the values 9, 10, 12, 15, 18, 20, 24 and 25 mm along the edges of the body. The same distance from the wall can therefore be repeated line after line without measuring again. For Pica Dry and Pica Fine Dry The block suits both the Pica Dry - Pica's professional construction marker that works on almost all surfaces - and the Pica Fine Dry with a lead of just 0.9 mm for fine and precise marking. Interchangeable adapters for both pencils are included. The pencils are not part of item 55805 and are sold separately. Applications Pica recommends the block for fitting work in flooring, drywall and carpentry, as well as similar tasks where a line has to follow the wall at an exact distance. Set with a pencil The manufacturer also offers the block together with a Pica Dry pencil as the Scriber Block Set. Item 55805 is the stand-alone block for those who already own a Pica Dry or Pica Fine Dry. The Scriber Block is a new item in Pica's range - the manufacturer announces availability from April-May 2026. Technical specifications ManufacturerPica-Marker (PICA) Item number55805 TypeScriber block for parallel lines PurposeParallel lines at a fixed distance from the wall CompatibilityPica Dry and Pica Fine Dry AdaptersInterchangeable, included Number of settings8 Distance range9-25 mm Values on the body9, 10, 12, 15, 18, 20, 24, 25 mm (per manufacturer images) ApplicationsFlooring, drywall, carpentry PencilNot included Questions and Answers Which pencils does the block work with? With the Pica Dry and Pica Fine Dry automatic pencils. The manufacturer states that the block is suitable for both models. Which distances can be set? The block has 8 settings in the range from 9 to 25 mm. The manufacturer's images show the values 9, 10, 12, 15, 18, 20, 24 and 25 mm on the body. Is a pencil included? No. Item 55805 is the stand-alone block. Pica separately offers the Scriber Block Set - the block together with a Pica Dry pencil. Do I need separate adapters for Pica Fine Dry? No. The interchangeable adapters for Pica Dry and Pica Fine Dry are included with the block. Which jobs is the block suitable for? Pica recommends it for fitting work in flooring, drywall and carpentry, and for similar tasks where marking is done at a set distance from the wall. What is the advantage over drawing freehand? According to the manufacturer, marking with the block is faster, safer and more precise than drawing freehand. Is it easy to carry? Pica describes the block as compact and handy for everyday use. ..
-30%
7.01€ 9.99€
Ex Tax:5.84€
Add to Cart
Brand: PICA Stock: In Stock
Pica Dry Carbide Scriber Needle, Ø2.8 x 30 mm - 55804 Pica 55804 is a carbide scriber needle that goes into the Pica Dry automatic pencil in place of a graphite lead. This turns the pencil you normally mark with in graphite into a scriber for precise scribing on metal. The needle is 2.8 mm in diameter and 30 mm long and comes in a self-service pack. A carbide needle that does not wear out According to the manufacturer the needle is made of tungsten carbide and is extremely robust - it does not wear out even after long periods of use. Pica recommends it for scribing metal surfaces where a very precise and long-lasting marking is needed. Pica describes the combination of a Pica Dry and such a needle as "the ultimate upgrade" for anyone working with metal. Compatibility with the Pica Dry The needle is an accessory for the Pica Dry Longlife Automatic Pencil (article 3030) - Pica's automatic pencil that takes 2.8 mm leads. To protect the pencil mechanism and keep it intact in the long term, the manufacturer stresses that the metal needle must be inserted from behind. The Pica Dry itself has a push mechanism feeding through a stainless steel tube, a holster with a clip for one-hand operation and dust and moisture protection. Tube for safe storage The needle comes in a practical plastic tube in which the pointed metal tip is stored safely when not in use. Set with pencil If you do not have a Pica Dry yet, the manufacturer also offers the same needle in the Pica Dry Metal Set (30800) - a Pica Dry automatic pencil with a grey cap, a standard 2B graphite lead and a scriber needle in a tube. The single needle 55804 is suitable as a spare or as an addition to a Pica Dry you already own. Technical specifications ManufacturerPica-Marker (PICA) Article55804 RangePica Dry accessories TypeScriber needle MaterialCarbide (tungsten carbide) Diameter2.8 mm Length30 mm CompatibilityPica Dry automatic pencil (3030) InsertionFrom behind StoragePlastic tube PackagingSelf-service pack Questions and Answers Which pencil does the needle work with? The needle is an accessory for the Pica Dry automatic pencil (article 3030), which takes 2.8 mm leads. The manufacturer lists it as compatible with the Pica Dry. What is the needle made of? Pica states that the needle is made of carbide (tungsten carbide). According to the manufacturer it is extremely robust and does not wear out even after long periods of use. How is the needle inserted into the pencil? The manufacturer stresses that the metal needle must be inserted from behind. This protects the pencil mechanism and keeps it intact in the long term. What are the needle's dimensions? The needle is 2.8 mm in diameter and 30 mm long. The diameter matches the 2.8 mm leads that the Pica Dry pencil takes. Is there a storage case? Yes, the needle comes in a plastic tube in which the pointed metal tip is stored safely when not in use. What is it used for? For precise scribing on metal. Pica recommends it for marking metal surfaces where an accurate and long-lasting line is needed. Is it available as a set with a pencil? Yes, Pica offers the same needle in the Pica Dry Metal Set (30800) together with a Pica Dry pencil with a grey cap and a 2B graphite lead. ..
7.60€
Ex Tax:6.33€
Add to Cart
Brand: PICA Stock: In Stock
Pica Classic 560 Jumbo Sharpener for Thick Pencils and Crayons - 560-12 Pica Classic 560-12 is a special Jumbo sharpener for all thick wooden pencils and crayons, whatever their shape. According to the manufacturer's pictogram it takes pencils and crayons up to 16 mm in diameter. The price is for 1 sharpener. Design The sharpener has a body with a large round opening and a metal blade held by a screw, as the manufacturer's photo shows. Pica includes it in its Classic Line as an accessory for its wooden pencils and marking crayons and supplies it to dealers in packs of 12. In its product sheet the German manufacturer lists it for building and underground construction, locksmiths, mechanics, plumbing, tiling and woodwork. Which pencils and crayons In its product sheet Pica links the sharpener to its thick pencils - the carpenter pencil, the Classic 541 stonemason pencil, the ANILINE special pencil, the FOR ALL and FOR ALL Black&White universal pencils, the dry&wet pencil and the two-colour DOUBLE pencil - and to its lumber and industrial marking crayons and the luminescent crayon PRO. On the Classic 541 stonemason pencil page the manufacturer again names the Jumbo 560-12 as the matching sharpener. Alternative As a more convenient alternative to sharpeners Pica recommends the Pica Pocket from its Innovative Line - a pencil holster with a built-in blade, in which the pencil is both carried and sharpened. Technical specifications ManufacturerPica-Marker Article560-12 RangePica Classic TypeSpecial Jumbo sharpener Max. diameterØ 16 mm Intended forThick wooden pencils and crayons of any shape BladeMetal, held by a screw EAN4260056157400 Manufacturer's pack12 pieces Quantity1 sharpener Questions and Answers What is the maximum diameter the sharpener takes? According to the manufacturer's pictogram the sharpener takes pencils and crayons up to 16 mm in diameter. Does it work for carpenter pencils of unusual shape? Pica offers it for all thick wooden pencils and crayons, whatever their shape, and links it to its carpenter pencil. The pencil must fit the 16 mm opening. Can crayons be sharpened too? Yes, the manufacturer lists the sharpener for crayons as well, including Pica's lumber and industrial marking crayons. What is the blade like? The blade is metal and held by a screw, as the manufacturer's photo shows. How many sharpeners do I get? The price is for 1 sharpener. The manufacturer supplies the sharpeners to dealers in packs of 12. Is it suitable for the Pica Classic 541 stonemason pencil? Yes, on the Classic 541 page Pica names precisely the Jumbo 560-12 sharpener. Is there a more convenient alternative? Pica recommends the Pica Pocket - a pencil holster with a built-in blade, in which the pencil is both carried and sharpened. ..
4.25€
Ex Tax:3.54€
Add to Cart
Brand: PICA Stock: In Stock
Spare Erasers for Pica Fine Dry, 5 Pieces - 55802 Pica 55802 is a set of 5 spare erasers for the Pica Fine Dry automatic pencil. The Fine Dry has a large integrated eraser for quick corrections, and this set lets you replace it once it wears out. The erasers come in a clear OPP poly bag with a hanging tab. Which pencil they fit The erasers are intended for the Pica Fine Dry (art. 7070) - an automatic pencil with a lead diameter of only 0.9 mm for fine and precise marking without sharpening. The manufacturer describes it with a push mechanism for automatic lead feed in a stainless steel tube, a practical holster of sturdy plastic with a special clip for one-hand operation, effective dust and moisture protection and a shaft with a roll stop. The large integrated eraser is one of its key features. Packaging Each bag contains 5 spare erasers. For retailers Pica supplies the bags hung on a clip strip with a metal hook - 10 bags per strip, for space-saving presentation in the shop. Refill leads for Fine Dry Besides the erasers, the manufacturer offers refill leads for the Fine Dry, 60 mm long and 0.9 mm in diameter: HB (7030) and H (7050) in packs of 24 - for most surfaces and for highest precision - and coloured red (7031) and white (7032) leads in packs of 12 for dark surfaces. A Fine Dry pencil comes loaded with 5 HB leads. According to the manufacturer all Fine Dry refills are temperature-resistant up to 70 °C. When a spare eraser is needed The integrated eraser of the Fine Dry is intended for quick corrections of the marking. The spare set extends the life of the pencil: when the eraser wears out, it is replaced with a new one from the bag, and the tool itself stays in use. Technical specifications ManufacturerPica-Marker (PICA) Article55802 EAN4260056159541 TypeSpare erasers Quantity5 erasers per bag For pencilPica Fine Dry (art. 7070), Ø 0.9 mm lead PackagingClear OPP poly bag with hanging tab Retail presentationClip strip with metal hook, 10 bags per strip Questions and Answers Which pencil are these erasers for? For the Pica Fine Dry automatic pencil (art. 7070) with a 0.9 mm lead. The Fine Dry has a large integrated eraser that can be replaced with this set. How many erasers are in the pack? One bag holds 5 spare erasers. The manufacturer packs them in a clear OPP poly bag with a hanging tab. Do they fit other Pica pencils? The manufacturer lists them as spare erasers for the Pica Fine Dry. Pica's data does not state compatibility with other models. Which refill leads are available for the Fine Dry? HB (7030) and H (7050) in packs of 24, plus coloured red (7031) and white (7032) leads in packs of 12 for dark surfaces. All are 0.9 mm in diameter and 60 mm long. How many leads does the pencil itself come with? According to the manufacturer the Pica Fine Dry comes loaded with 5 HB leads. Erasers and refill leads are bought separately. What are the key features of the Fine Dry? A push mechanism for automatic lead feed, a large integrated eraser, an ergonomic grip zone, dust and moisture protection and one-hand operation thanks to the holster with a special clip. What is the article number? The spare erasers for the Pica Fine Dry are article 55802, EAN 4260056159541. ..
-12%
3.58€ 4.09€
Ex Tax:2.98€
Add to Cart
Brand: Stanley Stock: In Stock
STANLEY FATMAX TradeLift Plus Extension Accessory FMHT83556-1 (Twin Pack) The STANLEY FATMAX FMHT83556-1 is a telescopic extension accessory for the TradeLift hand lifting tool, supplied by the manufacturer as a twin pack. It raises the tool's working height into the 295-685 mm range and carries a load of up to 150 kg. What the accessory does The TradeLift on its own works in the low range. The extension slides over the bar and is secured behind the lift plate, continuing the stroke upwards without changing how the tool is used. Its lift plate replicates the parameters of the base plate, so the bearing area under the workpiece stays the same and no stability is lost. Tool-free attachment and adjustment The accessory is secured by aluminium levers at the base - no spanners, no screws. It locks behind the lift plate so it cannot separate from the tool during operation. Height is set with aluminium locking pins at three positions, again without tools. Material and surface protection Construction is aluminium with reinforced plastic components. A removable cover on the lifting plate protects finished surfaces from scratches and marks - which matters when fitting furniture and already-painted components. The article carries the CE mark. Applications The manufacturer names three typical cases: fitting wall cabinets, bath levelling and fitting and installing staircases. What they share is a heavy or bulky component that has to be raised, held at an exact height and adjusted by one person. Pack contents and related articles STANLEY lists FMHT83556-1 as two telescopic extension accessories. The same accessory is also sold singly under article FMHT83554-1. The extension is an addition to the TradeLift - the lifting tool itself is not part of this article. Technical specifications ArticleFMHT83556-1 RangeSTANLEY FATMAX TradeLift Plus TypeTelescopic extension accessory for hand lifting tool Pieces in the manufacturer's pack2 Working height295-685 mm Maximum load150 kg Telescopic positions3, with aluminium locking pins AttachmentAluminium levers, tool-free AdjustmentTool-free MaterialAluminium with reinforced plastic components Surface protectionRemovable cover on the lifting plate Dimensions without packaging (L x W x H)85 x 105 x 295 mm Dimensions with packaging (L x W x H)295 x 140 x 200 mm Weight2.3 kg CE markYes Single-pack articleFMHT83554-1 Questions and Answers Which tool is this accessory for? It is for the STANLEY FATMAX TradeLift hand lifting tool. It slides over the tool's bar and is secured behind the lift plate, continuing the stroke upwards. The lifting tool itself is not part of the article. What height does it reach? The manufacturer states working heights of 295-685 mm for the accessory. The telescope locks at three positions with aluminium pins, so height is set in steps and without tools. How many kilograms does it take? STANLEY states a maximum load of 150 kg. The lift plate replicates the parameters of the tool's base plate, which keeps the bearing area and the stability at that load. Are tools needed to fit it? No. It is secured by aluminium levers at the base, and height is set with aluminium locking pins. Neither operation needs spanners or screws. Can it separate from the lift during work? The accessory locks behind the lift plate. STANLEY states that it therefore cannot come away from the tool in operation - that is built into the design, not an added precaution. Will it scratch a finished surface? The lifting plate carries a removable cover made for exactly that - protecting finished surfaces from scratches and marks when fitting furniture and painted components. Is there a single-accessory version? Yes. Article FMHT83556-1 contains two accessories, and the same accessory on its own is article FMHT83554-1 according to the manufacturer. ..
85.10€
Ex Tax:70.92€
Add to Cart
Brand: Stanley Stock: In Stock
Stanley FMHT1-51278 Goat's Foot HammerDescription: The Stanley FMHT1-51278 formwork hammer, weighing 0.805 kg , features an integrated design between the shaft and the head, ensuring excellent balance, durability, and a long service life. It is equipped with an ergonomic, textured, non-slip handle with a patented coating that significantly reduces vibration and fatigue during use. The hammer also features a convenient claw for removing nails, making it a practical tool for construction and formwork activities. Technical Specifications:Head weight: 0.805 kgOverall length: 335 mmHead material: tool steelHandle material: metal with rubberMagnet: noFeature: anti-vibrationDimensions (L x W x H): 335 x 30 x 139 mmTotal weight: 0.805 kg..
-9%
30.16€ 32.98€
Ex Tax:25.13€
Add to Cart
Brand: Stanley Stock: In Stock
Stanley FATMAX ANTIVIBE - Steel hammer, fully forged construction for durability and balance. Soft grip for comfort and control The Stanley FMHT1-51277 with anti-vibration grip features a patented large striking face for precise hammering, as well as a balanced head for enhanced control. Its proprietary fork-shaped handle is designed to reduce vibrations and hand fatigue during use. FatMax Antivibe All-Steel Curved NailsOne-piece forged construction for durability and balanceVibration-dampening forkSoft grip for comfort and controlFace diameter: 33mmGrip type: RubberShaft material: SteelWeight: 570g (20oz)..
-37%
35.79€ 57.26€
Ex Tax:29.83€
Add to Cart
Brand: Stanley Stock: In Stock
STANLEY STHT1-05937 45° Drywall Chamfering Tool, 230 mm The STANLEY STHT1-05937 is a specialist plane for cutting a 45° chamfer along the edge of a plasterboard panel. The manufacturer describes it as a 230 mm Chamfering Tool - an edge planer that lets two boards meet tightly and the joint be filled cleanly. Why the chamfer matters When two plasterboards butt together, the cut edge is square and leaves no room for filler. A 45° chamfer forms a V-groove between the panels that takes jointing compound and tape. The result is a joint that does not crack and does not show through the paint. Smooth guide along the board The tool has a stamped base that sits flat on the board and slides along its edge. Close contact reduces chatter and tearing, so the chamfer comes out at a constant depth over the whole length - which is what determines whether the joint finishes flat. Standard blade, quick change The tool takes standard utility blades, which is its practical advantage - the blade is available anywhere and is replaced when dull, rather than hunting for a proprietary consumable. A built-in blade adjuster allows the projection to be set quickly without dismantling. Body The body is die-cast zinc according to the manufacturer, which gives solid and accurate guidance of the blade. Overall dimensions are 230 x 80 x 80 mm at a weight of 1.0 kg. Applications Used in drywall work - partitions, suspended ceilings, linings and recesses - wherever two boards meet end to end and the joint has to disappear after filling and painting. Technical specifications ArticleSTHT1-05937 TypeDrywall edge chamfering plane Manufacturer designation230 mm Chamfering Tool Cutting angle45° BladeStandard utility blade Blade adjustmentBuilt-in quick adjuster BaseStamped, reduces chatter Body materialDie-cast zinc Dimensions (L x W x H)230 x 80 x 80 mm Weight1.0 kg Number of pieces1 EAN3253561059377 Questions and Answers What is the 45° chamfer for? When two plasterboards butt together, the square cut edge leaves no room for filler. The chamfer forms a V-groove that takes jointing compound and tape, so the joint does not crack. What blade does it take? The tool uses standard utility blades. That is its practical advantage - the blade is available anywhere and is replaced when dull, without hunting for a proprietary consumable. Is the depth adjustable? There is a built-in quick blade adjuster. It sets the blade projection and with it the depth of the chamfer, without dismantling the tool. What is the body made of? STANLEY describes the body as die-cast zinc. A solid metal body guides the blade accurately and reduces rocking as it slides along the edge. How long is the tool? The manufacturer designates it a 230 mm Chamfering Tool, with overall dimensions of 230 x 80 x 80 mm and a weight of 1.0 kg. Can it be used on materials other than plasterboard? The manufacturer describes the tool for clean transitions between two plasterboard panels. STANLEY states no application for other materials, so we make no such claim either. Why does the cut come out ragged? The usual causes are a dull blade and a base that is not sitting flat. The stamped base exists precisely to reduce chatter; if it does not bed down on the board, the chamfer comes out at varying depth. ..
-29%
15.50€ 21.74€
Ex Tax:12.92€
Add to Cart
Stonemason Pencil - Pica Classic 541, Graphite 10H, Oval, 30 cm, 541/30-100
Second hand Label BLACK FRIDAY -22%
Brand: PICA Stock: In Stock
Pica Classic 541 Stonemason Pencil, Graphite 10H, 30 cm - 541/30-100 Pica Classic 541 is a stonemason pencil with an oval cross-section and a graphite lead in the special hardness 10H. The manufacturer Pica-Marker offers it in professional quality for marking stone, concrete and brick. Article 541/30-100 is the 30 cm version. The photo shows the Classic 541 pencil, which the manufacturer offers in 24 and 30 cm lengths. Wood and graphite The body is made of easy-to-sharpen wood from sustainably managed forests. The graphite lead is high-quality and robust, with high breaking strength. The 10H grade is a special hardness that Pica also uses for the stonemason leads of its BIG Dry automatic pencil. Which surfaces it marks Pica lists brick, stone, concrete and wood as suitable. In its earlier product sheet the manufacturer rates the pencil as ideal for stone and concrete and acceptable on processed and raw wood and on metal. For wood Pica has a separate carpenter pencil - the Classic 540. The product sheet lists the pencil for building and underground construction. What 541/30-100 means At Pica the designation 541/30-100 stands for a display box of 100 pencils of the Classic 541 in 30 cm, while 541/30-10 is a hangable box of 10. The pencil is also made in 24 cm - articles 541/24-100 and 541/24-10. The shop price is for 1 pencil. Sharpening and carrying For sharpening thick wooden pencils Pica recommends the Jumbo 560-12 sharpener, and for carrying and sharpening in one the Pica Pocket holster with built-in blade, which according to the manufacturer suits thick wooden pencils of all kinds. As an alternative to the wooden pencil Pica also offers BIG Dry - a carpenter pencil with automatic lead feed at the push of a button, for which there are 10H stonemason leads (6055). Technical specifications ManufacturerPica-Marker Article541/30-100 RangePica Classic 541 TypeStonemason pencil Length30 cm Cross-sectionOval Lead hardness10H BodyEasy-to-sharpen wood; green SurfacesBrick, stone, concrete, wood Manufacturer's packDisplay box of 100 pencils Quantity1 pencil Questions and Answers What is the lead hardness? The lead is in the special hardness 10H. The manufacturer describes it as high-quality, robust and with high breaking strength. Which materials is the pencil suited to? Pica lists brick, stone, concrete and wood. According to the manufacturer it works best on stone and concrete. What does 541/30-100 mean? It is Pica's designation for a display box of 100 Classic 541 pencils in 30 cm. The shop price is for 1 pencil. Is there a shorter version? Yes, Pica also makes the Classic 541 in 24 cm - in a display box of 100 (541/24-100) and in a box of 10 (541/24-10). What should I sharpen the pencil with? Pica recommends the Jumbo 560-12 sharpener, made for thick wooden pencils and crayons. Another option is the Pica Pocket holster with built-in blade. What shape is the pencil? The pencil has an oval cross-section, and the body is made of easy-to-sharpen wood from sustainably managed forests. Is it suitable for marking wood? Pica lists wood as a suitable surface, but its earlier product sheet rates the result on wood as acceptable. For wood the manufacturer has a separate carpenter pencil, the Classic 540. ..
-22%
1.26€ 1.62€
Ex Tax:1.05€
Add to Cart
Brand: PICA Stock: In Stock
Pica BIG Dry Stonemason Refill Leads, Graphite 10H, 12 pcs - 6055 Pica 6055 is a pack of 12 stonemason leads in the special hardness 10H for the Pica BIG Dry automatic construction pencil. The manufacturer intends them for stone and concrete - for dry, rough brickwork and concrete surfaces. 10H graphite These are standard graphite refills in the special hardness 10H. On the pack Pica describes them as extremely hard and sturdy and extra long - 150 mm. The cross-section is rectangular, 2 x 5 mm, as with the other BIG Dry leads, so they fit the same pencil. Pack The twelve leads come in a sturdy plastic box with two opening wings, which keeps the spare leads safe until they are needed. The box carries the article number 6055, the barcode and the words Pica Germany, and the description is in German, English, French and Dutch. The manufacturer also offers the same leads on a 6055/SB blister card. The Pica BIG Dry pencil Pica BIG Dry is a carpenter pencil with automatic lead feed at the push of a button, which the manufacturer presents as its world premiere. The leads in the box are meant for refilling or exchange, and in its product sheet Pica lists the stonemason leads for building and underground construction. Surfaces In its product sheet Pica rates the stonemason leads as ideal for stone and concrete and acceptable on processed and dry raw wood. For wood the manufacturer offers separate carpenter leads 2H (6050), and for almost all materials the universal FOR ALL 2B leads (6030), which are water-soluble. Technical specifications ManufacturerPica-Marker Article6055 RangePica BIG Dry TypeStonemason refill leads CompatibilityPica BIG Dry Hardness10H Profile2 x 5 mm Length150 mm Quantity12 Intended forStone and concrete, dry and rough brickwork EAN4260056155390 PackPlastic box with two wings Questions and Answers Which pencil are the leads for? The leads are for the Pica BIG Dry automatic construction pencil, which uses rectangular 2 x 5 mm leads. What is the lead hardness? The leads are in the special hardness 10H. On the pack the manufacturer describes them as extremely hard and sturdy. Which materials are they suited to? Pica intends them for stone and concrete - for dry and rough brickwork. On processed and dry raw wood the result is acceptable according to the manufacturer. How many leads are there and what size are they? The box holds 12 leads with a 2 x 5 mm profile and a length of 150 mm. Are they suitable for marking wood? According to Pica the result on wood is only acceptable. For wood the manufacturer offers the carpenter leads 2H (6050). How do they differ from the universal FOR ALL leads? FOR ALL 2B leads (6030) are water-soluble and made for almost all materials. The 10H stonemason leads are much harder and intended for stone and concrete. How are the spare leads stored? The leads come in a sturdy plastic box with two opening wings, which keeps them until they are needed. ..
13.50€
Ex Tax:11.25€
Add to Cart
Brand: Milwaukee Stock: In Stock
Milwaukee Straight Utility Scissors, 230 mm, 4932479409DescriptionThe Milwaukee 4932479409 are professional straight utility scissors designed for precise cutting in construction, installation, electrical, maintenance, and general workshop applications. Built for daily professional use, they provide clean and accurate cuts across a wide range of materials. The blades are manufactured from stainless steel for excellent durability and corrosion resistance. A micro-serrated cutting edge improves grip on the material, preventing slipping and ensuring greater cutting accuracy. Ergonomic rubber overmoulded handles provide a secure, comfortable grip during prolonged use, while the integrated locking mechanism ensures safe storage and transportation. With an overall length of 230 mm, these scissors are suitable for cutting cardboard, plastic, rubber, textiles, leather, cables, and other soft materials commonly encountered on the job.Technical Specifications Brand: Milwaukee Part Number: 4932479409 Type: Professional straight utility scissors Overall length: 230 mm Blade material: Stainless steel Cutting edge: Micro-serrated Handles: Ergonomic rubber overmould Locking mechanism: Yes Suitable for: Cardboard Plastic Rubber Textiles Leather Cables Soft materials Package Includes 1 x Milwaukee Straight Utility Scissors..
-15%
18.80€ 22.00€
Ex Tax:15.67€
Add to Cart
Showing 101 to 120 of 148 (8 Pages)
Product Filter