Filter
Your Cart

Specific hand tools - Page 4

Brand: PICA Stock: In Stock
Pica VISOR permanent Refill Leads, Red, 4 pcs - 991/40 Pica 991/40 is an Easy Refill Pack with 4 red refill leads for the Pica VISOR permanent marker (990 range). On the pack the manufacturer labels them as MULTI-USE wax leads for dry and wet surfaces, and in its product sheet as a water-resistant marking crayon for marking on almost all materials. Each lead measures 10 mm in diameter and 85 mm in length. For the Pica VISOR permanent marker The leads are made to refill the Pica VISOR permanent Longlife Industrial Marker - a marker with a twist mechanism and a 10 mm tip. Thanks to the twist mechanism the lead is replaced quickly and easily, and Pica stresses that refilling takes only seconds. The leads are stored in the plastic Easy Refill Pack, which opens with a pull tab (marked PULL). A marking that never dries out According to the manufacturer the wax lead never dries out and writes at full performance from the first to the very last line. The marking is water-resistant and extremely hard-wearing, which is why Pica recommends the range especially for outdoor work - on rough or wet surfaces. The manufacturer also states that one lead replaces up to 5 conventional ink or paint markers, and the low consumption and quick refilling make the solution economical and environmentally friendly. Surfaces For the 991 refills Pica lists tiles, plastic, metal, wood, rubber, wet rubber, wet wood, leather and brick as suitable surfaces. The manufacturer warns that the leads should not be exposed to temperatures above 40 °C, so do not leave them in a hot car or in direct sunlight. Chloride-free colours If you mark stainless steel, choose one of the chloride-free colours. Pica marks the blue (991/41), white (991/52) and black (991/46) refills as chloride-free and names them precisely for marking on stainless steel. The manufacturer gives no such designation for the red refills. Colours in the range The VISOR permanent refills come in seven colours: green (991/36), red (991/40), blue (991/41), yellow (991/44), black (991/46), white (991/52) and fluo orange (991/054). This page is for variant 991/40 - red. Pica also offers the red, blue, yellow and white refills in a hanging blister (suffix /SB). Technical specifications ManufacturerPica-Marker (PICA) Article991/40 RangePica VISOR permanent (Innovative Line) TypeMULTI-USE wax refill leads, Easy Refill Pack ColourRed Pieces per pack4 leads Lead sizeØ 10 mm, length 85 mm CompatibilityPica VISOR permanent marker (990 range) SurfacesTiles, plastic, metal, wood, rubber, wet rubber, wet wood, leather, brick TemperatureDo not expose to temperatures above 40 °C EAN (from the pack)4260056153716 Questions and Answers Which marker are these refills for? For the Pica VISOR permanent Longlife Industrial Marker of the 990 range. The marker has a twist mechanism that makes changing the lead quick and easy. How many leads are in the pack? The Easy Refill Pack contains 4 red leads, each 10 mm in diameter and 85 mm long. Do they write on wet surfaces? Yes. On the pack Pica states that the leads are for dry and wet surfaces, and the listed materials include wet wood and wet rubber. Do the leads dry out over time? According to the manufacturer the wax lead never dries out and writes at full performance from the first to the very last line. Pica also states that one lead replaces up to 5 conventional ink or paint markers. Is there a temperature limit? Yes. Pica recommends not exposing the leads to temperatures above 40 °C, so do not leave the marker and spare leads in a car in the sun. Are they suitable for stainless steel? Pica marks only the blue (991/41), white (991/52) and black (991/46) refills as chloride-free and suitable for stainless steel. The manufacturer does not state this for the red refills, so choose one of those colours for stainless steel. Which other colours are available? The range has seven colours: green 991/36, red 991/40, blue 991/41, yellow 991/44, black 991/46, white 991/52 and fluo orange 991/054. ..
5.99€
Ex Tax:4.99€
Add to Cart
Brand: PICA Stock: In Stock
Pica VISOR permanent Refill Leads, White, 4 pcs - 991/52 Pica 991/52 is an Easy Refill Pack with 4 white refill leads for the Pica VISOR permanent marker (990 range). On the pack the manufacturer labels them as MULTI-USE wax leads for dry and wet surfaces, and in its product sheet as a water-resistant marking crayon for marking on almost all materials. Each lead measures 10 mm in diameter and 85 mm in length. For the Pica VISOR permanent marker The leads are made to refill the Pica VISOR permanent Longlife Industrial Marker - a marker with a twist mechanism and a 10 mm tip. Thanks to the twist mechanism the lead is replaced quickly and easily, and Pica stresses that refilling takes only seconds. The leads are stored in the plastic Easy Refill Pack, which opens with a pull tab (marked PULL). A marking that never dries out According to the manufacturer the wax lead never dries out and writes at full performance from the first to the very last line. The marking is water-resistant and extremely hard-wearing, which is why Pica recommends the range especially for outdoor work - on rough or wet surfaces. The manufacturer also states that one lead replaces up to 5 conventional ink or paint markers, and the low consumption and quick refilling make the solution economical and environmentally friendly. Surfaces For the 991 refills Pica lists tiles, plastic, metal, wood, rubber, wet rubber, wet wood, leather and brick as suitable surfaces. The manufacturer warns that the leads should not be exposed to temperatures above 40 °C, so do not leave them in a hot car or in direct sunlight. Chloride-free colours The white refills 991/52 are among the colours Pica marks as chloride-free - together with blue, white and black. The manufacturer names them explicitly for marking on stainless steel. Colours in the range The VISOR permanent refills come in seven colours: green (991/36), red (991/40), blue (991/41), yellow (991/44), black (991/46), white (991/52) and fluo orange (991/054). This page is for variant 991/52 - white. Pica also offers the red, blue, yellow and white refills in a hanging blister (suffix /SB). Technical specifications ManufacturerPica-Marker (PICA) Article991/52 RangePica VISOR permanent (Innovative Line) TypeMULTI-USE wax refill leads, Easy Refill Pack ColourWhite Pieces per pack4 leads Lead sizeØ 10 mm, length 85 mm CompatibilityPica VISOR permanent marker (990 range) SurfacesTiles, plastic, metal, wood, rubber, wet rubber, wet wood, leather, brick TemperatureDo not expose to temperatures above 40 °C ChloridesChloride-free - suitable for stainless steel EAN (from the pack)4260056153761 Questions and Answers Which marker are these refills for? For the Pica VISOR permanent Longlife Industrial Marker of the 990 range. The marker has a twist mechanism that makes changing the lead quick and easy. How many leads are in the pack? The Easy Refill Pack contains 4 white leads, each 10 mm in diameter and 85 mm long. Do they write on wet surfaces? Yes. On the pack Pica states that the leads are for dry and wet surfaces, and the listed materials include wet wood and wet rubber. Do the leads dry out over time? According to the manufacturer the wax lead never dries out and writes at full performance from the first to the very last line. Pica also states that one lead replaces up to 5 conventional ink or paint markers. Is there a temperature limit? Yes. Pica recommends not exposing the leads to temperatures above 40 °C, so do not leave the marker and spare leads in a car in the sun. Are they suitable for stainless steel? Yes. Pica marks the white refills as chloride-free and names them for marking on stainless steel. The same applies to the white and black refills of the range. Which other colours are available? The range has seven colours: green 991/36, red 991/40, blue 991/41, yellow 991/44, black 991/46, white 991/52 and fluo orange 991/054. ..
5.99€
Ex Tax:4.99€
Add to Cart
Brand: PICA Stock: In Stock
Pica VISOR permanent Refill Leads, Yellow, 4 pcs - 991/44 Pica 991/44 is an Easy Refill Pack with 4 yellow refill leads for the Pica VISOR permanent marker (990 range). On the pack the manufacturer labels them as MULTI-USE wax leads for dry and wet surfaces, and in its product sheet as a water-resistant marking crayon for marking on almost all materials. Each lead measures 10 mm in diameter and 85 mm in length. For the Pica VISOR permanent marker The leads are made to refill the Pica VISOR permanent Longlife Industrial Marker - a marker with a twist mechanism and a 10 mm tip. Thanks to the twist mechanism the lead is replaced quickly and easily, and Pica stresses that refilling takes only seconds. The leads are stored in the plastic Easy Refill Pack, which opens with a pull tab (marked PULL). A marking that never dries out According to the manufacturer the wax lead never dries out and writes at full performance from the first to the very last line. The marking is water-resistant and extremely hard-wearing, which is why Pica recommends the range especially for outdoor work - on rough or wet surfaces. The manufacturer also states that one lead replaces up to 5 conventional ink or paint markers, and the low consumption and quick refilling make the solution economical and environmentally friendly. Surfaces For the 991 refills Pica lists tiles, plastic, metal, wood, rubber, wet rubber, wet wood, leather and brick as suitable surfaces. The manufacturer warns that the leads should not be exposed to temperatures above 40 °C, so do not leave them in a hot car or in direct sunlight. Chloride-free colours If you mark stainless steel, choose one of the chloride-free colours. Pica marks the blue (991/41), white (991/52) and black (991/46) refills as chloride-free and names them precisely for marking on stainless steel. The manufacturer gives no such designation for the yellow refills. Colours in the range The VISOR permanent refills come in seven colours: green (991/36), red (991/40), blue (991/41), yellow (991/44), black (991/46), white (991/52) and fluo orange (991/054). This page is for variant 991/44 - yellow. Pica also offers the red, blue, yellow and white refills in a hanging blister (suffix /SB). Technical specifications ManufacturerPica-Marker (PICA) Article991/44 RangePica VISOR permanent (Innovative Line) TypeMULTI-USE wax refill leads, Easy Refill Pack ColourYellow Pieces per pack4 leads Lead sizeØ 10 mm, length 85 mm CompatibilityPica VISOR permanent marker (990 range) SurfacesTiles, plastic, metal, wood, rubber, wet rubber, wet wood, leather, brick TemperatureDo not expose to temperatures above 40 °C EAN (from the pack)4260056153754 Questions and Answers Which marker are these refills for? For the Pica VISOR permanent Longlife Industrial Marker of the 990 range. The marker has a twist mechanism that makes changing the lead quick and easy. How many leads are in the pack? The Easy Refill Pack contains 4 yellow leads, each 10 mm in diameter and 85 mm long. Do they write on wet surfaces? Yes. On the pack Pica states that the leads are for dry and wet surfaces, and the listed materials include wet wood and wet rubber. Do the leads dry out over time? According to the manufacturer the wax lead never dries out and writes at full performance from the first to the very last line. Pica also states that one lead replaces up to 5 conventional ink or paint markers. Is there a temperature limit? Yes. Pica recommends not exposing the leads to temperatures above 40 °C, so do not leave the marker and spare leads in a car in the sun. Are they suitable for stainless steel? Pica marks only the blue (991/41), white (991/52) and black (991/46) refills as chloride-free and suitable for stainless steel. The manufacturer does not state this for the yellow refills, so choose one of those colours for stainless steel. Which other colours are available? The range has seven colours: green 991/36, red 991/40, blue 991/41, yellow 991/44, black 991/46, white 991/52 and fluo orange 991/054. ..
5.99€
Ex Tax:4.99€
Add to Cart
Brand: PICA Stock: In Stock
PICA Dry Scriber Block Set, 2 Pieces, 30801DescriptionPICA 30801 is a professional 2-piece marking set combining the Pica Dry 3030 construction marker with the Pica Scriber Block 55805 parallel marking tool. It is designed for precise fitting and marking work in flooring, drywall, carpentry and similar applications. The Pica Scriber Block enables accurate parallel lines to be marked at a fixed distance from a wall or other reference surface. It provides 8 selectable distance settings from 9 to 25 mm, making repetitive fitting and marking work faster and more precise. The Scriber Block is compatible with both Pica Dry and Pica Fine Dry, with interchangeable adapters included. Its compact design makes it convenient for everyday professional use. The included Pica Dry 3030 is supplied with a versatile 2B graphite refill. The combination provides a practical marking solution for professional construction and woodworking applications.Technical Specifications Brand: PICA Model: Pica Dry Scriber Block Set Type: Marking Set Number of Pieces: 2 Marker: Pica Dry 3030 Scriber: Pica Scriber Block 55805 Refill: Graphite Graphite Grade: 2B Distance Settings: 8 Marking Range: 9-25 mm Scriber Compatibility: Pica Dry & Pica Fine Dry Interchangeable Adapters: Included Applications: Flooring, Drywall, Carpentry & Fitting Work Package Includes 1 x Pica Dry 3030 Construction Marker with 2B Graphite Refill 1 x Pica Scriber Block 55805 Interchangeable adapters for Pica Dry & Pica Fine Dry..
18.00€
Ex Tax:15.00€
Add to Cart
Brand: PICA Stock: In Stock
Pica Master-Set - an installer's marking tools in one pouch Pica makes marking tools and nothing else - hence Innovative Marking Tools on the box. The Master-Set gathers the marking kit an installer actually reaches for into a single textile pouch with elastic loops that folds flat into a work trouser pocket or hangs from a belt. The box states the set is for plumbers, tilers and electricians - trades where you mark on materials an ordinary pencil will not touch: glazed tile, galvanised pipe, PVC, lacquered timber, wet concrete. What is in the pouch The loops hold Pica marking pencils and markers in several colours together with a card of spare leads. Each tool sits in its own loop and comes out one-handed, without digging through a bag. The remaining sections stay free for your own additions. Why a dedicated marker An ordinary pencil will not write on wet, greasy or polished surfaces. Pica's tools exist for exactly that - deep holes during installation, where a normal marker cannot reach, and smooth surfaces, where an ordinary line wipes away at the first touch.Technical specifications ManufacturerPica - Innovative Marking Tools Article55020 DesignationMaster-Set Intended forplumbers, installers, electricians Carrierfolding textile pouch with elastic loops ContentsPica marking pencils and markers with spare leads Carriedin a work trouser pocket or on a belt Questions and Answers Who is the set aimed at? Plumbers, tilers and electricians - the box states this in four languages. How is it carried? The pouch folds in half and drops into a work trouser pocket, or clips to a belt. Each tool has its own elastic loop. Why not an ordinary pencil? Ordinary graphite does not take on wet, greasy or polished surfaces. Pica's tools are built for glazed tile, galvanised pipe, PVC and wet concrete. Are spare leads included? Yes, a card of spare leads is part of the set. Can it mark inside a deep hole? That is one of the jobs the set exists for - during installation an ordinary marker cannot reach the bottom of a bore. Can I add my own tools? Yes. Some sections stay free so you can fit your own. What is the article number? 55020. That is Pica's code for the Master-Set in this configuration. ..
-18%
53.00€ 64.93€
Ex Tax:44.17€
Add to Cart
Brand: PICA Stock: In Stock
PICA MASTER-SET Marking Set, Article 55010 PICA 55010 is a marking set built around two Pica-Dry automatic pencils with refills, plus two markers for difficult surfaces. EAN 4260056157196. Exactly what is inside Six items, each with its own PICA article number: 2 x Pica-Dry deep-hole marker (3030) 1 x Pica-Dry refill - 10 graphite leads, 10H (4050) 1 x Pica-Dry refill - 4 graphite + 2 red + 2 yellow (4020) 1 x PICA Classic permanent marker INSTANT-WHITE (532/52) Bonus: 1 x Pica-Ink deep-hole marker, black (150/46) Why two pencils rather than one The Pica-Dry is an automatic pencil with a 2.8 mm lead and a sharpener built into the cap. Changing colour means changing the lead, which takes seconds but interrupts the work. Two bodies means graphite in one and colour in the other - no stopping to reload. The difference between the refills 4050 is ten graphite leads in 10H - hard, for a fine and lasting line on smooth surfaces. 4020 is mixed: 4 graphite, 2 red and 2 yellow. The colours read on dark material where graphite disappears - which is the whole reason they are in the set. Made for deep holes Both the Pica-Dry and the Pica-Ink are deep-hole markers - the tip is extended and shielded so it reaches into a bore or a narrow gap where an ordinary pencil or marker cannot. That is the main reason this range gets bought. Ink or graphite Graphite on the Pica-Dry rubs out and can be corrected - useful when setting out. Ink on the Pica-Ink 150/46 is permanent and waterproof and stays where it is put. The INSTANT-WHITE permanent marker covers the third case: white on dark and oily. What it writes on The Pica-Dry range grips tile, gloss and glass, and equally metal, rusty and oiled surfaces - exactly where an ordinary pencil slides. That makes this a set for installation work rather than for drawing on paper. Why 10H The 4050 refill is 10H - the hard end of the pencil scale. Soft graphite smears on a smooth surface and the line is gone at the first touch; hard leaves a thin, precise, lasting mark, but wants less pressure, because it snaps under heavy hands. For setting out on tile and metal that is the right choice; for writing on cardboard it is not. Technical specifications ManufacturerPICA Article55010 TypeMASTER-SET marking set Pica-Dry markers2 pieces (3030) Refill 405010 x graphite 10H Refill 40204 x graphite + 2 x red + 2 x yellow Permanent markerPICA Classic INSTANT-WHITE (532/52) BonusPica-Ink deep-hole marker, black (150/46) Lead diameter2.8 mm SharpenerBuilt into the cap ApplicationDeep holes, tile, glass, metal, rusty and oiled surfaces EAN4260056157196 Questions and Answers How many pieces are in the set? Six: 2 x Pica-Dry 3030, refill 4050, refill 4020, permanent marker 532/52 and a bonus Pica-Ink 150/46. Why two pencils? So you can keep graphite in one and colour in the other - changing a lead interrupts the work. What is the difference between the refills? 4050 is 10 graphite 10H leads. 4020 is mixed: 4 graphite, 2 red and 2 yellow - for dark materials. What does a deep-hole marker mean? The tip is extended and shielded so it reaches into a bore or gap where an ordinary pencil cannot. Will it write on tile and metal? Yes - the range grips tile, gloss, glass, metal, rusty and oiled surfaces. Does it rub out? The graphite does. The Pica-Ink and the permanent marker are lasting. Is there a sharpener? Yes - built into the cap of the Pica-Dry. ..
-23%
59.00€ 76.19€
Ex Tax:49.17€
Add to Cart
Brand: PICA Stock: In Stock
Pica Dry Metal Set - Automatic Pencil and Metal Scriber Needle - 30800 Pica 30800 Dry Metal Set is a bundle of the Pica Dry automatic pencil and a carbide scriber needle. The pencil has a grey cap and comes loaded with the standard 2B graphite lead, while the needle sits in a separate plastic tube. The manufacturer presents the set as "the ultimate upgrade" for anyone working with metal: one pencil lets you mark in graphite and scribe precisely on metal. Carbide scriber needle The needle is made of tungsten carbide, 2.8 mm in diameter and 30 mm long. According to Pica it allows very precise scribing of metal surfaces for a long time and does not wear out even after long periods of use. When not in use, the needle is stored safely in the practical plastic tube. The manufacturer stresses that the metal needle must be inserted into the pencil from behind to protect the mechanism. The Pica Dry automatic pencil The Pica Dry is Pica's professional automatic construction pencil, suitable for almost all surfaces. It takes leads of 2.8 mm diameter and 125 mm length, and has a push mechanism that feeds the lead through a stainless steel tube, a holster with a special clip for one-hand operation and a patented sharpener integrated in the holster. The shaft has a roll stop, and the design offers dust and moisture protection. Grey cap and safe handling The pencil in the set has a grey cap so that it can be told apart quickly in a trouser pocket, on the workbench or on the tool belt. The quiver cap allows safe handling without risk of injury. The standard FOR ALL 2B lead writes on almost all surfaces, and various refill leads are available for the Pica Dry for other tasks. What is in the set The set comes in a 70 x 235 mm blister and contains a Pica Dry pencil with a grey cap and a 2B graphite lead, plus a plastic tube with 1 scriber needle. Pica also offers a spare needle separately (article 55804). Technical specifications ManufacturerPica-Marker (PICA) Article30800 RangePica Dry (Innovative Line) TypeSet: automatic pencil + scriber needle PencilPica Dry with grey cap Lead fittedFOR ALL graphite 2B Pencil leadsØ 2.8 mm, length 125 mm NeedleCarbide (tungsten carbide), Ø 2.8 mm, length 30 mm Needle storagePlastic tube Needle insertionFrom behind PackagingBlister 70 x 235 mm Contents1 Pica Dry pencil, 1 scriber needle in tube Questions and Answers What does the set contain? A Pica Dry automatic pencil with a grey cap, loaded with a 2B graphite lead, and a plastic tube with one carbide scriber needle. The set comes in a 70 x 235 mm blister. What is the needle for? For precise scribing on metal. The needle is made of tungsten carbide and according to the manufacturer does not wear out even after long periods of use. How is the needle inserted? Pica stresses that the metal needle must be inserted into the pencil from behind. This protects the pencil mechanism and keeps it intact in the long term. Which leads does the pencil use? The Pica Dry takes leads of 2.8 mm diameter and 125 mm length. In the set the pencil is loaded with the standard FOR ALL 2B graphite. Why is the cap grey? The grey cap helps the pencil from the set stand out quickly in a pocket, on the workbench or on the tool belt. The quiver cap also allows safe handling without risk of injury. Is there a sharpener? Yes. The Pica Dry has a patented sharpener integrated in the holster, as well as a clip for one-hand operation. Can I buy the needle separately? Yes, Pica also offers the spare scriber needle on its own under article 55804. ..
-20%
18.41€ 22.96€
Ex Tax:15.34€
Add to Cart
Brand: Milwaukee Stock: In Stock
Milwaukee 49567010 Core Drill Adapter, 9.5 mm HEX, 1/2" x 20 mm..
6.05€
Ex Tax:5.04€
Add to Cart
Brand: Milwaukee Stock: In Stock
Milwaukee INKZALL Deep Reach Marker, 30 mm Extended Ultra-Fine Tip 4932502324 is a marker from Milwaukee's INKZALL range, built around one awkward job on site - marking a spot an ordinary marker cannot physically reach. The slim section ahead of the collar is extended to 30 mm, the point is ultra-fine and the ink is black and permanent. The article ships loose, 1 pc, without a blister. The long tip goes where the barrel cannot Those 30 millimetres are the length of the protruding tip, not the width of the line it draws. That reach is what lets you mark through a drilled hole, down a deep socket or behind a profile - places where the fat body of a normal marker bottoms out before the point ever touches the surface. Milwaukee prints this exact use on the box as Deep Hole Marking. An ultra-fine point for a thin, accurate line The point is an ultra-fine type, for a thin line that stays readable when you are setting out an anchor hole or marking a drilling centre. The surfaces Milwaukee rates the marker for are concrete, OSB and rough jobsite surfaces. On abrasive ground like that an ordinary fine marker frays after a few strokes; this tip is built to take it. Resharpen the tip instead of binning the marker When the ultra-fine point wears down, the marker does not go in the bin: the collar pushes back, the worn section is cut off and the marker carries on writing. Milwaukee marks this on the packaging as Built to Resharpen. It is also why the tip looks like a thin rod - there has to be material sticking out before there is anything to trim. 72 hours with the cap off Milwaukee states that the marker keeps writing after more than 72 hours of cap-off time, which on site is the difference that counts, because the cap rarely goes straight back on. The European box also carries two markings that Milwaukee's own European text does not explain - 2 IN 1 and Twist Off Cap; they are noted here as printed, with no meaning read into them. Technical specifications ManufacturerMilwaukee RangeINKZALL Deep Reach Article number (EU)4932502324 EAN4058546661694 Product typeMarker Extended tip length30 mm Point typeUltra-fine line Ink colourBlack, permanent Cap-off writing timeover 72 hours SurfacesConcrete, OSB, rough jobsite surfaces Resharpenable tipYes - the collar pushes back and the worn tip is cut off Pack quantity1 pc (bulk, no blister) Questions and Answers What does the "30 mm" in the name refer to? It is the length of the protruding tip, not the width of the line. The line itself is ultra-fine. Milwaukee prints the feature on the box as "30mm Deep Reach Tip". How many markers does the article contain? One. Article 4932502324 is the bulk version - the marker comes without a blister, and Milwaukee gives the pack quantity as 1 pc. Can the tip be resharpened? Yes. Push the collar back, cut off the worn section of the tip and the marker writes again. Milwaukee labels this "Built to Resharpen". What surfaces will it write on? Milwaukee rates the marker for concrete, OSB and rough jobsite surfaces. The ink is black and permanent. How long does it last with the cap left off? Milwaukee states that the marker still writes after more than 72 hours of cap-off time. Why is 48-22-3152 printed on the marker? 48-22-3152 is the US number for the same marker. The European article number is 4932502324 and it is printed on the packaging. Both numbers refer to one and the same product. How does it differ from article 4932501147? That is the same marker in a blister pack, EAN 4058546624491. Article 4932502324, the one listed here, is the bulk version of the same product. ..
-3%
3.40€ 3.52€
Ex Tax:2.83€
Add to Cart
Stock: In Stock
Milwaukee Cutting Jaw for M18 HCCTMilwaukee 4932464497 is a cutting jaw set with integrated blades, designed for use with the M18 HCCT cordless hydraulic cutting and crimping systems. It is suitable for standard Cu/Al copper and aluminum power cables and is designed as an original accessory for professional use.Practical ApplicationThe jaw is used as a replaceable cutting module when a cutting configuration is required instead of crimping. This makes it convenient for electrical installations, industrial installations, and infrastructure work involving power cables. It is suitable as a spare or additional head for users who already use the M18 HCCT platform.Key FeaturesThe product is supplied as a complete jaw with pre-installed blades. It is compatible with the mechanical interface and hydraulic output of the Milwaukee M18 HCCT, with SKU 4932464497 allowing for easy identification during service, delivery, and spare parts management. The kit includes 1 cutting jaw for Cu/Al cables...
514.79€
Ex Tax:428.99€
Add to Cart
Brand: Milwaukee Stock: In Stock
Milwaukee SDS PLUS 1/2" x 20" Core Drill Adapter, 14-30 mm..
27.12€
Ex Tax:22.60€
Add to Cart
Brand: Milwaukee Stock: In Stock
Milwaukee SDS+ 5/8" x 18 mm Core Drill Adapter, 4932471695..
-29%
23.52€ 33.01€
Ex Tax:19.60€
Add to Cart
Brand: PICA Stock: In Stock
Pica Pocket 505/02 - Pencil Holster with Sharpener and Stonemason Pencil Pica Pocket 505/02 is a bundle of a pencil holster with a built-in sharpening blade and a Pica Classic 541 stonemason pencil, 24 cm long. The manufacturer describes the Pocket as holster and sharpener in one: a robust holder that keeps a thick wooden pencil secured and always to hand, and sharpens it with the same tool once it goes blunt. Variant 505/02 is the bundle with the stonemason pencil. The range also includes bundles with a carpenter's pencil (505/01), a Black & White pencil (505/03) and a For All universal pencil (505/04). The Pica Pocket holster The holster is 195 mm long and takes thick wooden pencils of any cross-section - oval, flat oval, Black Edge, triangular and hexagonal - and of any length. The built-in clamping function fixes the pencil, and the clip with extra reinforcement keeps the holster firmly on a pocket. The pencil can be used right down to the smallest stub. The pencil is always to hand The idea behind the Pica Pocket is simple: the pencil sits in the same place on the pocket, clamped in the holster, and can be pulled out without looking for it. Attention stays on the job, the pencil does not get lost in the tool bag, and the sharpener is always with it. Pica lists the Pocket in its Innovative Line. Sharpening blade with a stop A carbon steel blade is built into the holster. Next to it sits a safety bar that limits the cutting depth, much like a potato peeler. Sharpening is quick and precise, and the fingers are protected from injury. The Pica Classic 541 stonemason pencil Pica Classic 541 is an oval stonemason pencil with a graphite lead in the special hardness 10H and high breaking strength. The wood comes from sustainably managed forests and is easy to sharpen. The manufacturer recommends it for marking on brick, stone, concrete and wood. Applications The bundle is meant for work on rough mineral surfaces where the pencil needs to sit on the pocket rather than in the toolbox. When the stonemason pencil is used up, any other thick wooden pencil - a carpenter's pencil, for example - fits in the holster. Technical specifications ManufacturerPica-Marker Article505/02 RangePica Pocket Contents1 Pica Pocket holster with sharpening blade, 1 Pica Classic 541 stonemason pencil Holster length195 mm Sharpening bladeCarbon steel, with safety bar FasteningClip with extra reinforcement, pencil clamping function Compatible pencilsThick wooden pencils - oval, flat oval, Black Edge, triangular, hexagonal, any length Pencil includedPica Classic 541, stonemason, oval, 24 cm Lead hardness10H Surfaces (pencil)Brick, stone, concrete, wood Questions and Answers What does the 505/02 bundle contain? One Pica Pocket holster with a built-in sharpening blade and one Pica Classic 541 stonemason pencil, 24 cm long. The pencil has an oval cross-section and a 10H graphite lead. Can I use the holster with other pencils? Yes. The Pica Pocket takes thick wooden pencils with oval, flat oval, triangular and hexagonal cross-sections as well as Black Edge pencils, of any length. A carpenter's pencil, for example, fits as well. How is the pencil sharpened? With the carbon steel blade built into the holster itself. The safety bar next to the blade limits the cutting depth, so sharpening is precise and the fingers stay protected. How is the holster attached? With a clip with extra reinforcement that holds it on a pocket. The clamping function fixes the pencil in the holster so it does not slip out while working. What surfaces is the stonemason pencil for? The manufacturer lists brick, stone, concrete and wood. The graphite lead comes in the special hardness 10H and has high breaking strength. What is the difference between 505/01 and 505/02? The Pica Pocket holster is the same; the pencil in the bundle differs. Variant 505/01 comes with a carpenter's pencil and 505/02 with a Pica Classic 541 stonemason pencil. How long is the holster? The Pica Pocket holster is 195 mm long. The pencil in it can be used right down to the smallest stub. ..
-15%
8.89€ 10.48€
Ex Tax:7.41€
Add to Cart
Brand: Bosch Stock: In Stock
Bosch Pencil Lead Refills Multicolor 2.8 mm, 1600 A03 AL5 The Bosch 1600 A03 AL5 replacement leads are 2.8 mm in diameter and 120 mm long. The pack holds six leads in three colours - 2 HB (grey), 2 red and 2 yellow. The colour is practical rather than decorative: grey graphite disappears on dark OSB or wet concrete while yellow and red stay legible, and it lets the different lines of one set of marks - centre, cut, waste - be told apart by colour. Compatibility 2.8 mm is the lead size Bosch uses in its mechanical construction pencils - including the deep hole marker pencil 1 600 A03 B64. The diameter and length are standard for this class of pencil, so the leads also load into other makes of pencil of the same calibre. Why 2.8 mm Thin office leads (0.5 and 0.7 mm) snap at once on concrete, render or sawn timber. A 2.8 mm lead takes the pressure of a rough surface, and the point is restored with the sharpener built into the cap of the pencil. Storage The leads come in a clear tube with a cap that protects them from snapping in a pocket or a tool bag. The tube also stores the remaining leads once the pencil has been loaded.Technical specifications BrandBosch Professional Part number1600 A03 AL5 EAN4059952737454 TypeReplacement leads for mechanical pencil Lead diameter2.8 mm HardnessHB Length120 mm Set description2 HB, 2 red, 2 yellow Pack quantity6 pcs PackagingCardboard packaging, tube, with Euro hole Questions and Answers How many leads are in the pack? Bosch states a pack quantity of 6 pieces for this part number. The set is 2 HB, 2 red, 2 yellow. Which pencil are these leads for? Bosch mechanical construction pencils of 2.8 mm calibre, including the deep hole marker pencil 1 600 A03 B64. The diameter is standard for this class of pencil. How long is one lead? 120 mm, at 2.8 mm diameter. What is the hardness? HB - the middle, general-purpose grade. Bosch states HB for both versions of the refill leads, the coloured one included. What is the difference between 1600A03AL4 and 1600A03AL5? AL4 is a set of identical HB leads. AL5 is the multicolour version - 2 HB, 2 red and 2 yellow. Size and hardness are the same. Can the lead be sharpened? Yes. Bosch pencils of this class have a sharpener built into the cap, sized for the 2.8 mm lead. Do they write on a wet surface? Graphite is a dry marking medium - on wet or oily concrete the mark is faint. Such conditions call for special water-resistant leads, which are not part of this article. ..
-18%
4.00€ 4.90€
Ex Tax:3.33€
Add to Cart
Brand: Bosch Stock: In Stock
Bosch Pencil Lead Refills HB 2.8 mm, 1600 A03 AL4 The Bosch 1600 A03 AL4 replacement leads are 2.8 mm in diameter and 120 mm long. The pack holds six HB leads - the general-purpose grade that writes dark enough on timber, plasterboard and paper while still resisting breakage under pressure on a rough surface. Compatibility 2.8 mm is the lead size Bosch uses in its mechanical construction pencils - including the deep hole marker pencil 1 600 A03 B64. The diameter and length are standard for this class of pencil, so the leads also load into other makes of pencil of the same calibre. Why 2.8 mm Thin office leads (0.5 and 0.7 mm) snap at once on concrete, render or sawn timber. A 2.8 mm lead takes the pressure of a rough surface, and the point is restored with the sharpener built into the cap of the pencil. Storage The leads come in a clear tube with a cap that protects them from snapping in a pocket or a tool bag. The tube also stores the remaining leads once the pencil has been loaded.Technical specifications BrandBosch Professional Part number1600 A03 AL4 EAN4059952737447 TypeReplacement leads for mechanical pencil Lead diameter2.8 mm HardnessHB Length120 mm Set descriptionAll leads HB Pack quantity6 pcs PackagingCardboard packaging, tube, with Euro hole Questions and Answers How many leads are in the pack? Bosch states a pack quantity of 6 pieces for this part number. Which pencil are these leads for? Bosch mechanical construction pencils of 2.8 mm calibre, including the deep hole marker pencil 1 600 A03 B64. The diameter is standard for this class of pencil. How long is one lead? 120 mm, at 2.8 mm diameter. What is the hardness? HB - the middle, general-purpose grade. Bosch states HB for both versions of the refill leads, the coloured one included. What is the difference between 1600A03AL4 and 1600A03AL5? AL4 is a set of identical HB leads. AL5 is the multicolour version - 2 HB, 2 red and 2 yellow. Size and hardness are the same. Can the lead be sharpened? Yes. Bosch pencils of this class have a sharpener built into the cap, sized for the 2.8 mm lead. Do they write on a wet surface? Graphite is a dry marking medium - on wet or oily concrete the mark is faint. Such conditions call for special water-resistant leads, which are not part of this article. ..
-18%
4.00€ 4.90€
Ex Tax:3.33€
Add to Cart
Brand: PICA Stock: In Stock
Pica Pocket Pencil Quiver with Sharpening Blade - 505 Pica Pocket 505 is a pencil holster and sharpener in one. The manufacturer describes it as an extremely robust holder that fits all shapes of thick wooden pencils. Thanks to the integrated clip almost any wooden pencil stays safe and ready to hand in a trouser pocket - right down to the last stub. Article 505 is the holster itself, without a pencil. A robust holster for thick wooden pencils The holster is 195 mm long and, according to the manufacturer, extremely robust. It takes all thick wooden pencils - with an oval, flat oval, Black Edge, triangular or hexagonal cross-section - of any length. The built-in clamping function fixes the pencil in the holster, and the clip with extra reinforcement gives a permanent hold on a pocket. The pencil can be used right down to the smallest stub. Carbon steel blade with a safety bar A carbon steel blade is built into the holster, which the manufacturer describes as sharp as a razor. Next to it sits a safety bar: much like a potato peeler it limits the cutting depth, so sharpening is quick and precise and the fingers are protected from injury. The pencil is sharpened with the same tool it is carried in. The pencil is always at hand According to the manufacturer the clamping function keeps the wooden pencil always at hand: attention stays on the job, and the pencil is found without having to look for it. Pica lists the Pocket in its Innovative Line, alongside the Dry, Fine Dry and BIG Dry automatic pencils and the Ink and BIG Ink markers. Which pencils to use The pencil for the holster is chosen freely to suit the job, and the lead depends on the pencil used - the manufacturer does not tie the holster to any particular hardness. On the pages of its wooden pencils - for example the Classic 540 carpenter pencil and the Classic 545 FOR ALL universal pencil - Pica recommends exactly the Pocket as a matching holster for thick wooden pencils of all kinds. The manufacturer also offers the Pocket in bundles with a free pencil: with a carpenter's pencil (505/01), a stonemason pencil (505/02), a Black & White pencil (505/03) and a For All universal pencil (505/04). Technical specifications ManufacturerPica-Marker (PICA) Article505 RangePica Pocket (Innovative Line) TypePencil holster with built-in sharpening blade Holster length195 mm BladeCarbon steel, with safety bar RetentionPencil clamping function, clip with extra reinforcement Compatible pencilsThick wooden pencils - oval, flat oval, Black Edge, triangular, hexagonal, any length LeadDepends on the pencil used Pencil includedNo - the article is the holster itself Questions and Answers Is a pencil included? No. Article 505 is the Pica Pocket holster itself. The manufacturer offers separate bundles with a free pencil - 505/01 with a carpenter's, 505/02 with a stonemason, 505/03 with a Black & White and 505/04 with a For All universal pencil. Which pencils does the holster take? All thick wooden pencils - with an oval, flat oval, Black Edge, triangular or hexagonal cross-section - of any length. The pencil can be used right down to the smallest stub. How is the pencil sharpened? With the built-in carbon steel blade. The safety bar limits the cutting depth, much like a potato peeler, so sharpening is precise and fingers are protected. How does the pencil stay in the holster? The built-in clamping function fixes the pencil in the holster. The holster attaches to a pocket with a clip with extra reinforcement for a permanent hold. How long is the holster? The Pica Pocket holster is 195 mm long. The pencil can be of any length. Can it be used with pencils from other Pica ranges? Yes, as long as it is a thick wooden pencil. On the pages of its Classic pencils, such as 540 and 545 FOR ALL, Pica recommends the Pocket as a matching holster for thick wooden pencils of all kinds. Which other versions are there? The manufacturer offers the Pocket on its own (505) and in bundles with a free pencil: carpenter's (505/01), stonemason (505/02), Black & White (505/03) and For All universal (505/04). ..
-15%
8.70€ 10.22€
Ex Tax:7.25€
Add to Cart
Brand: PICA Stock: In Stock
Pica Pocket with Pica Classic 540 Carpenter Pencil - 505/01 Pica Pocket 505/01 is a bundle of a pencil holster with a built-in sharpening blade and one free Pica Classic 540 carpenter pencil, 24 cm long. The manufacturer describes the Pocket as holster and sharpener in one: an extremely robust holder that fits all shapes of thick wooden pencils and keeps the pencil at hand in a trouser pocket - right down to the last stub. The bundle comes in a blister pack. A robust holster for thick wooden pencils The holster is 195 mm long and, according to the manufacturer, extremely robust. It takes all thick wooden pencils - with an oval, flat oval, Black Edge, triangular or hexagonal cross-section - of any length. The built-in clamping function fixes the pencil in the holster, and the clip with extra reinforcement gives a permanent hold on a pocket. The pencil can be used right down to the smallest stub. Carbon steel blade with a safety bar A carbon steel blade is built into the holster, which the manufacturer describes as sharp as a razor. Next to it sits a safety bar: much like a potato peeler it limits the cutting depth, so sharpening is quick and precise and the fingers are protected from injury. The pencil is sharpened with the same tool it is carried in. The Pica Classic 540 carpenter pencil Pica Classic 540 is an oval carpenter pencil which the manufacturer describes as being of the highest professional quality. The wood comes from sustainably managed forests and is easy to sharpen, while the 2H graphite lead gives rich strokes and has high break resistance. Pica lists the pencil as suitable for wood, stone, brick, concrete and metal. The bundle contains the 24 cm version; on its own the manufacturer offers the Classic 540 in 24 and 30 cm lengths. Other Pocket bundles Besides the carpenter's pencil bundle (505/01), the manufacturer offers the Pocket with a stonemason pencil (505/02), a Black & White pencil (505/03) and a For All universal pencil (505/04), and on its own as article 505. When the pencil from the bundle is used up, any other thick wooden pencil fits in the holster. Technical specifications ManufacturerPica-Marker (PICA) Article505/01 EAN4260056152306 RangePica Pocket (Innovative Line) Contents1 Pica Pocket holster with sharpening blade, 1 Pica Classic 540 carpenter pencil Holster length195 mm BladeCarbon steel, with safety bar RetentionPencil clamping function, clip with extra reinforcement Compatible pencilsThick wooden pencils - oval, flat oval, Black Edge, triangular, hexagonal, any length Pencil in the bundlePica Classic 540, oval, 2H graphite, 24 cm PackagingBlister Questions and Answers What does the bundle contain? One Pica Pocket holster with a built-in sharpening blade and one Pica Classic 540 carpenter pencil, 24 cm long. The manufacturer presents the pencil as a free addition to the holster. Which pencils does the holster take? All thick wooden pencils - with an oval, flat oval, Black Edge, triangular or hexagonal cross-section - of any length. The pencil can be used right down to the smallest stub. How is the pencil sharpened? With the built-in carbon steel blade. The safety bar limits the cutting depth, much like a potato peeler, so sharpening is precise and fingers are protected. How does the pencil stay in the holster? The built-in clamping function fixes the pencil in the holster. The holster attaches to a pocket with a clip with extra reinforcement for a permanent hold. How long is the holster? The Pica Pocket holster is 195 mm long. The pencil can be of any length. Can it be used with pencils from other Pica ranges? Yes, as long as it is a thick wooden pencil. On the pages of its Classic pencils, such as 540 and 545 FOR ALL, Pica recommends the Pocket as a matching holster for thick wooden pencils of all kinds. Which other versions are there? The manufacturer offers the Pocket on its own (505) and in bundles with a free pencil: carpenter's (505/01), stonemason (505/02), Black & White (505/03) and For All universal (505/04). ..
-15%
8.94€ 10.54€
Ex Tax:7.45€
Add to Cart
Brand: PICA Stock: In Stock
Pica Classic 534 Permanent Pen, Black, Medium Tip M 1 mm - 534/46 Pica Classic 534/46 is a black permanent pen with a medium tip (M) of 1 mm for highly visible markings. The ink is permanent and alcohol-based, and according to the manufacturer immediately abrasion- and water-resistant. The pen writes on almost all surfaces and is free from xylene and toluene. The photo shows the pen with and without its cap. INSTANT-DRY ink Pica describes the Classic 533/534 as permanent pens for markings that are dry instantly. In its earlier product sheet the manufacturer adds that the ink is fast-drying, water-resistant and indelible. Tip F or M The range has two tips: fine (F) 0.7 mm for precise markings - the Classic 533 pen - and medium (M) 1 mm for highly visible markings - the Classic 534. Article 534/46 is the black pen with the medium tip. Surfaces Pica lists metal, wood, plastic, glass, paper, tiles and brick as suitable surfaces. In its earlier product sheet the manufacturer rates the pen as ideal for metal, processed wood, plastic and glass, suitable for tiles and ceramics, and acceptable on stone, concrete and leather. Which trades Pica names the Classic 533/534 pens for electrical work, glazing, locksmithing, mechanics, plumbing and sanitary work, tiling and woodwork. The manufacturer supplies 534/46 in trade boxes of 10, and in a hanging blister under article 534/46/SB. Pica also offers a set of 4 permanent pens with medium line width in 4 colours, with white as the fourth colour - article 534/04. Technical specifications ManufacturerPica-Marker (PICA) Article534/46 RangePica Classic 533/534 Permanent Pen (Classic Line) TypePermanent pen ColourBlack TipMedium (M), 1 mm InkPermanent, alcohol-based (INSTANT-DRY) PropertiesImmediately abrasion- and water-resistant; fast-drying; indelible Xylene and tolueneFree SurfacesMetal, wood, plastic, glass, paper, tiles, brick Manufacturer's trade packBox of 10; blister - 534/46/SB Questions and Answers How wide is the tip? The 534 pen has a medium tip (M) of 1 mm. For more precise markings Pica offers the 533 pen with a fine tip (F) of 0.7 mm. What is the ink based on? The ink is permanent and alcohol-based, and free from xylene and toluene. Is the marking water-resistant? Yes. Pica states that the marking is immediately abrasion- and water-resistant, and its earlier product sheet describes the ink as water-resistant and indelible. Which materials does it write on? The manufacturer lists metal, wood, plastic, glass, paper, tiles and brick. According to the earlier product sheet it gives the best results on metal, processed wood, plastic and glass. How quickly does it dry? Pica describes the Classic 533/534 as pens for markings that are dry instantly, and the ink as fast-drying. What is the difference between 533 and 534? The difference is the tip: 533 has a fine F tip of 0.7 mm for precise markings, and 534 a medium M tip of 1 mm for highly visible markings. Is it available in a set with other colours? Pica offers the set 534/04 with 4 permanent pens in medium line width in 4 colours, the fourth colour being white. The manufacturer does not list the other three colours of the set in its description. ..
1.98€
Ex Tax:1.65€
Add to Cart
Brand: PICA Stock: In Stock
Pica Classic 520 Permanent Marker Set, 4 Colours - 520/04 Pica Classic 520/04 is a set of 4 permanent markers with a round tip in red, blue, black and white. The manufacturer Pica-Marker presents it in the Classic 520 range and highlights as its distinctive feature that the fourth colour in the set is white. White is useful for marking dark materials. What is in the set The four markers sit in a clear plastic case with a hang hole. On the label the manufacturer states that the markers write on almost all surfaces, marks a round tip with a 1-4 mm line and shows the colours as dots - red, blue, black and white. The set is also included in the assortment of the white Pica Instant White 522/532 markers. The Classic 520 range Pica Classic 520 markers use alcohol-based Dry Safe ink. According to the manufacturer the marking is waterproof and smudge-proof after about 5 seconds, the marker can stay uncapped for up to 48 hours without drying out, and the ink is free from xylene and toluene. Pica lists metal, wood, plastic, tiles, glass, paper, rubber and brick as suitable surfaces. The earlier Classic 520 product sheet rates the markers as ideal for metal, processed wood, plastic and glass, suitable for tiles and ceramics and acceptable on dry rubber, stone and concrete, raw wood and leather, and names glaziers, locksmiths, mechanics and plumbers among the trades. Single markers and a wide tip The Classic 520 range is also sold as single round-tip markers: black (520/46), red (520/40), green (520/36) and blue (520/41). When a wider line is needed, the manufacturer also offers a wedge-tip version with a 2-6 mm line - Pica Classic 521, in the same four colours. Pica sells the white round-tip marker separately as the Classic 522 Instant White. Technical specifications ManufacturerPica-Marker Article520/04 RangePica Classic 520 TypePermanent marker set Number of markers4 ColoursRed, blue, black, white TipRound Line width1-4 mm PackClear plastic case with hang hole Surfaces (Classic 520 range)Metal, wood, plastic, tiles, glass, paper, rubber, brick Questions and Answers Which markers does the set contain? The set contains four permanent markers with a round tip - red, blue, black and white. The manufacturer presents it in the Pica Classic 520 range. What line do the markers draw? The markers have a round tip and a 1-4 mm line, as marked on the label of the case. For a wider line Pica offers the Classic 521 range with a 2-6 mm wedge tip. Why is there a white marker in the set? Pica highlights the white fourth colour as the distinctive feature of the set. White gives contrast where dark markers are hard to see - on dark materials. What pack does the set come in? The markers come in a clear plastic case with a hang hole. The label shows the colours, the line width and the types of surface. Which surfaces do the Classic 520 markers write on? For the Classic 520 range the manufacturer lists metal, wood, plastic, tiles, glass, paper, rubber and brick. The ink is alcohol-based and free from xylene and toluene. Can I buy the colours separately? Yes, Pica Classic 520 is also sold as single markers: black 520/46, red 520/40, green 520/36 and blue 520/41. Pica sells a white round-tip marker separately as the Classic 522 Instant White. Do the markers dry out quickly if left open? For the Classic 520 range the manufacturer specifies Dry Safe ink, which lets the marker stay uncapped for up to 48 hours without drying out. The marking becomes waterproof after about 5 seconds. ..
-15%
7.16€ 8.44€
Ex Tax:5.97€
Add to Cart
Brand: PICA Stock: In Stock
Pica Classic 534 Permanent Pen Set, 4 Colours with White - 534/04 Pica Classic 534/04 is a set of 4 permanent pens from the Classic 533/534 range in 4 colours. All pens in the set have a medium line width - in this range that is the medium tip (M) of 1 mm - and according to the article description they have a round tip. As a special feature Pica points out that the fourth colour in the set is white. The Pica Classic 533/534 range The Classic 533/534 are Pica's permanent pens for markings that are dry instantly. The range has two tips: fine (F) 0.7 mm for precise markings (533) and medium (M) 1 mm for highly visible markings (534). The 534/04 set is made up of pens with the medium line width. Ink and surfaces For the range the manufacturer states a permanent alcohol-based ink that is immediately abrasion- and water-resistant and free from xylene and toluene. Pica lists metal, wood, plastic, glass, paper, tiles and brick as suitable surfaces for the Classic 533/534 pens. Pica does not state separately whether the white pen in the set uses the same ink - for white markings the manufacturer also has the separate Classic 532 INSTANT-WHITE pen. Ratings by material and trades In the earlier product sheet for the 533/534 range Pica rates the pens as ideal for metal, processed wood, plastic and glass, suitable for tiles and ceramics, and acceptable on stone, concrete and leather. The manufacturer names them for electrical work, glazing, locksmithing, mechanics, plumbing and sanitary work, tiling and woodwork. What is in the set According to Pica's description the set contains 4 permanent pens in 4 different colours, the fourth being white. The other three colours are not stated in the manufacturer's description. The black medium-tip pen is also available on its own - article 534/46. Technical specifications ManufacturerPica-Marker (PICA) Article534/04 RangePica Classic 533/534 Permanent Pen (Classic Line) TypePermanent pen set Number of pens4 Colours4 colours, the fourth is white (the other three are not stated by the manufacturer) Line widthMedium - M tip 1 mm TipRound (per the article description) Range inkPermanent, alcohol-based, free from xylene and toluene Surfaces (533/534 range)Metal, wood, plastic, glass, paper, tiles, brick Questions and Answers How many pens are in the set? The set contains 4 Pica Classic permanent pens in 4 colours. All have a medium line width. Which colours are in the set? Pica states that the set comes in 4 colours and that the fourth colour is white. The manufacturer does not list the other three colours in the article description. How wide is the line, and what is the tip like? The pens have a medium line width - in the Classic 533/534 range that is the M tip of 1 mm. According to the article description the tip is round. What is the ink based on? For the Classic 533/534 range Pica states a permanent alcohol-based ink free from xylene and toluene. The manufacturer gives no separate data for the white pen in the set. Which materials do the pens write on? For the 533/534 range the manufacturer lists metal, wood, plastic, glass, paper, tiles and brick. Can I buy the pens individually? The black medium-tip pen is available on its own as article 534/46. For white markings Pica also has the separate Classic 532 INSTANT-WHITE pen. What is the difference between Classic 533 and 534? The difference is the tip: Classic 533 has a fine F tip of 0.7 mm for precise markings, and Classic 534 a medium M tip of 1 mm for highly visible markings. The 534/04 set consists of medium-line pens. ..
8.80€
Ex Tax:7.33€
Add to Cart
Showing 61 to 80 of 148 (8 Pages)
Product Filter