Hand tools - Page 44

Bosch Pencil Lead Refills Multicolor 2.8 mm, 1600 A03 AL5 The Bosch 1600 A03 AL5 replacement leads are 2.8 mm in diameter and 120 mm long. The pack holds six leads in three colours - 2 HB (grey), 2 red and 2 yellow. The colour is practical rather than decorative: grey graphite disappears on dark OSB or wet concrete while yellow and red stay legible, and it lets the different lines of one set of marks - centre, cut, waste - be told apart by colour. Compatibility 2.8 mm is the lead size Bosch uses in its mechanical construction pencils - including the deep hole marker pencil 1 600 A03 B64. The diameter and length are standard for this class of pencil, so the leads also load into other makes of pencil of the same calibre. Why 2.8 mm Thin office leads (0.5 and 0.7 mm) snap at once on concrete, render or sawn timber. A 2.8 mm lead takes the pressure of a rough surface, and the point is restored with the sharpener built into the cap of the pencil. Storage The leads come in a clear tube with a cap that protects them from snapping in a pocket or a tool bag. The tube also stores the remaining leads once the pencil has been loaded.Technical specifications BrandBosch Professional Part number1600 A03 AL5 EAN4059952737454 TypeReplacement leads for mechanical pencil Lead diameter2.8 mm HardnessHB Length120 mm Set description2 HB, 2 red, 2 yellow Pack quantity6 pcs PackagingCardboard packaging, tube, with Euro hole Questions and Answers How many leads are in the pack? Bosch states a pack quantity of 6 pieces for this part number. The set is 2 HB, 2 red, 2 yellow. Which pencil are these leads for? Bosch mechanical construction pencils of 2.8 mm calibre, including the deep hole marker pencil 1 600 A03 B64. The diameter is standard for this class of pencil. How long is one lead? 120 mm, at 2.8 mm diameter. What is the hardness? HB - the middle, general-purpose grade. Bosch states HB for both versions of the refill leads, the coloured one included. What is the difference between 1600A03AL4 and 1600A03AL5? AL4 is a set of identical HB leads. AL5 is the multicolour version - 2 HB, 2 red and 2 yellow. Size and hardness are the same. Can the lead be sharpened? Yes. Bosch pencils of this class have a sharpener built into the cap, sized for the 2.8 mm lead. Do they write on a wet surface? Graphite is a dry marking medium - on wet or oily concrete the mark is faint. Such conditions call for special water-resistant leads, which are not part of this article. ..

Bosch Pencil Lead Refills HB 2.8 mm, 1600 A03 AL4 The Bosch 1600 A03 AL4 replacement leads are 2.8 mm in diameter and 120 mm long. The pack holds six HB leads - the general-purpose grade that writes dark enough on timber, plasterboard and paper while still resisting breakage under pressure on a rough surface. Compatibility 2.8 mm is the lead size Bosch uses in its mechanical construction pencils - including the deep hole marker pencil 1 600 A03 B64. The diameter and length are standard for this class of pencil, so the leads also load into other makes of pencil of the same calibre. Why 2.8 mm Thin office leads (0.5 and 0.7 mm) snap at once on concrete, render or sawn timber. A 2.8 mm lead takes the pressure of a rough surface, and the point is restored with the sharpener built into the cap of the pencil. Storage The leads come in a clear tube with a cap that protects them from snapping in a pocket or a tool bag. The tube also stores the remaining leads once the pencil has been loaded.Technical specifications BrandBosch Professional Part number1600 A03 AL4 EAN4059952737447 TypeReplacement leads for mechanical pencil Lead diameter2.8 mm HardnessHB Length120 mm Set descriptionAll leads HB Pack quantity6 pcs PackagingCardboard packaging, tube, with Euro hole Questions and Answers How many leads are in the pack? Bosch states a pack quantity of 6 pieces for this part number. Which pencil are these leads for? Bosch mechanical construction pencils of 2.8 mm calibre, including the deep hole marker pencil 1 600 A03 B64. The diameter is standard for this class of pencil. How long is one lead? 120 mm, at 2.8 mm diameter. What is the hardness? HB - the middle, general-purpose grade. Bosch states HB for both versions of the refill leads, the coloured one included. What is the difference between 1600A03AL4 and 1600A03AL5? AL4 is a set of identical HB leads. AL5 is the multicolour version - 2 HB, 2 red and 2 yellow. Size and hardness are the same. Can the lead be sharpened? Yes. Bosch pencils of this class have a sharpener built into the cap, sized for the 2.8 mm lead. Do they write on a wet surface? Graphite is a dry marking medium - on wet or oily concrete the mark is faint. Such conditions call for special water-resistant leads, which are not part of this article. ..

Pica Pocket Pencil Quiver with Sharpening Blade - 505 Pica Pocket 505 is a pencil holster and sharpener in one. The manufacturer describes it as an extremely robust holder that fits all shapes of thick wooden pencils. Thanks to the integrated clip almost any wooden pencil stays safe and ready to hand in a trouser pocket - right down to the last stub. Article 505 is the holster itself, without a pencil. A robust holster for thick wooden pencils The holster is 195 mm long and, according to the manufacturer, extremely robust. It takes all thick wooden pencils - with an oval, flat oval, Black Edge, triangular or hexagonal cross-section - of any length. The built-in clamping function fixes the pencil in the holster, and the clip with extra reinforcement gives a permanent hold on a pocket. The pencil can be used right down to the smallest stub. Carbon steel blade with a safety bar A carbon steel blade is built into the holster, which the manufacturer describes as sharp as a razor. Next to it sits a safety bar: much like a potato peeler it limits the cutting depth, so sharpening is quick and precise and the fingers are protected from injury. The pencil is sharpened with the same tool it is carried in. The pencil is always at hand According to the manufacturer the clamping function keeps the wooden pencil always at hand: attention stays on the job, and the pencil is found without having to look for it. Pica lists the Pocket in its Innovative Line, alongside the Dry, Fine Dry and BIG Dry automatic pencils and the Ink and BIG Ink markers. Which pencils to use The pencil for the holster is chosen freely to suit the job, and the lead depends on the pencil used - the manufacturer does not tie the holster to any particular hardness. On the pages of its wooden pencils - for example the Classic 540 carpenter pencil and the Classic 545 FOR ALL universal pencil - Pica recommends exactly the Pocket as a matching holster for thick wooden pencils of all kinds. The manufacturer also offers the Pocket in bundles with a free pencil: with a carpenter's pencil (505/01), a stonemason pencil (505/02), a Black & White pencil (505/03) and a For All universal pencil (505/04). Technical specifications ManufacturerPica-Marker (PICA) Article505 RangePica Pocket (Innovative Line) TypePencil holster with built-in sharpening blade Holster length195 mm BladeCarbon steel, with safety bar RetentionPencil clamping function, clip with extra reinforcement Compatible pencilsThick wooden pencils - oval, flat oval, Black Edge, triangular, hexagonal, any length LeadDepends on the pencil used Pencil includedNo - the article is the holster itself Questions and Answers Is a pencil included? No. Article 505 is the Pica Pocket holster itself. The manufacturer offers separate bundles with a free pencil - 505/01 with a carpenter's, 505/02 with a stonemason, 505/03 with a Black & White and 505/04 with a For All universal pencil. Which pencils does the holster take? All thick wooden pencils - with an oval, flat oval, Black Edge, triangular or hexagonal cross-section - of any length. The pencil can be used right down to the smallest stub. How is the pencil sharpened? With the built-in carbon steel blade. The safety bar limits the cutting depth, much like a potato peeler, so sharpening is precise and fingers are protected. How does the pencil stay in the holster? The built-in clamping function fixes the pencil in the holster. The holster attaches to a pocket with a clip with extra reinforcement for a permanent hold. How long is the holster? The Pica Pocket holster is 195 mm long. The pencil can be of any length. Can it be used with pencils from other Pica ranges? Yes, as long as it is a thick wooden pencil. On the pages of its Classic pencils, such as 540 and 545 FOR ALL, Pica recommends the Pocket as a matching holster for thick wooden pencils of all kinds. Which other versions are there? The manufacturer offers the Pocket on its own (505) and in bundles with a free pencil: carpenter's (505/01), stonemason (505/02), Black & White (505/03) and For All universal (505/04). ..

Pica Pocket with Pica Classic 540 Carpenter Pencil - 505/01 Pica Pocket 505/01 is a bundle of a pencil holster with a built-in sharpening blade and one free Pica Classic 540 carpenter pencil, 24 cm long. The manufacturer describes the Pocket as holster and sharpener in one: an extremely robust holder that fits all shapes of thick wooden pencils and keeps the pencil at hand in a trouser pocket - right down to the last stub. The bundle comes in a blister pack. A robust holster for thick wooden pencils The holster is 195 mm long and, according to the manufacturer, extremely robust. It takes all thick wooden pencils - with an oval, flat oval, Black Edge, triangular or hexagonal cross-section - of any length. The built-in clamping function fixes the pencil in the holster, and the clip with extra reinforcement gives a permanent hold on a pocket. The pencil can be used right down to the smallest stub. Carbon steel blade with a safety bar A carbon steel blade is built into the holster, which the manufacturer describes as sharp as a razor. Next to it sits a safety bar: much like a potato peeler it limits the cutting depth, so sharpening is quick and precise and the fingers are protected from injury. The pencil is sharpened with the same tool it is carried in. The Pica Classic 540 carpenter pencil Pica Classic 540 is an oval carpenter pencil which the manufacturer describes as being of the highest professional quality. The wood comes from sustainably managed forests and is easy to sharpen, while the 2H graphite lead gives rich strokes and has high break resistance. Pica lists the pencil as suitable for wood, stone, brick, concrete and metal. The bundle contains the 24 cm version; on its own the manufacturer offers the Classic 540 in 24 and 30 cm lengths. Other Pocket bundles Besides the carpenter's pencil bundle (505/01), the manufacturer offers the Pocket with a stonemason pencil (505/02), a Black & White pencil (505/03) and a For All universal pencil (505/04), and on its own as article 505. When the pencil from the bundle is used up, any other thick wooden pencil fits in the holster. Technical specifications ManufacturerPica-Marker (PICA) Article505/01 EAN4260056152306 RangePica Pocket (Innovative Line) Contents1 Pica Pocket holster with sharpening blade, 1 Pica Classic 540 carpenter pencil Holster length195 mm BladeCarbon steel, with safety bar RetentionPencil clamping function, clip with extra reinforcement Compatible pencilsThick wooden pencils - oval, flat oval, Black Edge, triangular, hexagonal, any length Pencil in the bundlePica Classic 540, oval, 2H graphite, 24 cm PackagingBlister Questions and Answers What does the bundle contain? One Pica Pocket holster with a built-in sharpening blade and one Pica Classic 540 carpenter pencil, 24 cm long. The manufacturer presents the pencil as a free addition to the holster. Which pencils does the holster take? All thick wooden pencils - with an oval, flat oval, Black Edge, triangular or hexagonal cross-section - of any length. The pencil can be used right down to the smallest stub. How is the pencil sharpened? With the built-in carbon steel blade. The safety bar limits the cutting depth, much like a potato peeler, so sharpening is precise and fingers are protected. How does the pencil stay in the holster? The built-in clamping function fixes the pencil in the holster. The holster attaches to a pocket with a clip with extra reinforcement for a permanent hold. How long is the holster? The Pica Pocket holster is 195 mm long. The pencil can be of any length. Can it be used with pencils from other Pica ranges? Yes, as long as it is a thick wooden pencil. On the pages of its Classic pencils, such as 540 and 545 FOR ALL, Pica recommends the Pocket as a matching holster for thick wooden pencils of all kinds. Which other versions are there? The manufacturer offers the Pocket on its own (505) and in bundles with a free pencil: carpenter's (505/01), stonemason (505/02), Black & White (505/03) and For All universal (505/04). ..

Pica Classic 520 Permanent Marker Set, 4 Colours - 520/04 Pica Classic 520/04 is a set of 4 permanent markers with a round tip in red, blue, black and white. The manufacturer Pica-Marker presents it in the Classic 520 range and highlights as its distinctive feature that the fourth colour in the set is white. White is useful for marking dark materials. What is in the set The four markers sit in a clear plastic case with a hang hole. On the label the manufacturer states that the markers write on almost all surfaces, marks a round tip with a 1-4 mm line and shows the colours as dots - red, blue, black and white. The set is also included in the assortment of the white Pica Instant White 522/532 markers. The Classic 520 range Pica Classic 520 markers use alcohol-based Dry Safe ink. According to the manufacturer the marking is waterproof and smudge-proof after about 5 seconds, the marker can stay uncapped for up to 48 hours without drying out, and the ink is free from xylene and toluene. Pica lists metal, wood, plastic, tiles, glass, paper, rubber and brick as suitable surfaces. The earlier Classic 520 product sheet rates the markers as ideal for metal, processed wood, plastic and glass, suitable for tiles and ceramics and acceptable on dry rubber, stone and concrete, raw wood and leather, and names glaziers, locksmiths, mechanics and plumbers among the trades. Single markers and a wide tip The Classic 520 range is also sold as single round-tip markers: black (520/46), red (520/40), green (520/36) and blue (520/41). When a wider line is needed, the manufacturer also offers a wedge-tip version with a 2-6 mm line - Pica Classic 521, in the same four colours. Pica sells the white round-tip marker separately as the Classic 522 Instant White. Technical specifications ManufacturerPica-Marker Article520/04 RangePica Classic 520 TypePermanent marker set Number of markers4 ColoursRed, blue, black, white TipRound Line width1-4 mm PackClear plastic case with hang hole Surfaces (Classic 520 range)Metal, wood, plastic, tiles, glass, paper, rubber, brick Questions and Answers Which markers does the set contain? The set contains four permanent markers with a round tip - red, blue, black and white. The manufacturer presents it in the Pica Classic 520 range. What line do the markers draw? The markers have a round tip and a 1-4 mm line, as marked on the label of the case. For a wider line Pica offers the Classic 521 range with a 2-6 mm wedge tip. Why is there a white marker in the set? Pica highlights the white fourth colour as the distinctive feature of the set. White gives contrast where dark markers are hard to see - on dark materials. What pack does the set come in? The markers come in a clear plastic case with a hang hole. The label shows the colours, the line width and the types of surface. Which surfaces do the Classic 520 markers write on? For the Classic 520 range the manufacturer lists metal, wood, plastic, tiles, glass, paper, rubber and brick. The ink is alcohol-based and free from xylene and toluene. Can I buy the colours separately? Yes, Pica Classic 520 is also sold as single markers: black 520/46, red 520/40, green 520/36 and blue 520/41. Pica sells a white round-tip marker separately as the Classic 522 Instant White. Do the markers dry out quickly if left open? For the Classic 520 range the manufacturer specifies Dry Safe ink, which lets the marker stay uncapped for up to 48 hours without drying out. The marking becomes waterproof after about 5 seconds. ..

Permanent Paint Marker Pica Classic 524, White - 524/52 Pica Classic 524/52 is an industrial paint marker (Lackmarker / Paint Marker) from the Pica Classic line of the German manufacturer Pica-Marker, in white. It is designed for permanent marking on almost all surfaces. The paint is highly opaque, so the lines are bright, high-contrast and clearly visible. The marker has a round tip and leaves a line 2-4 mm wide. The barrel is white with the "Pica Classic 524" print, while the cap and tip are in the colour of the paint. Durable marking indoors and outdoors According to the manufacturer the paint is extremely lightfast, quick-drying and also suitable for outdoor use. The marking is hard to remove, which makes the marker a good choice wherever a label has to stay legible for a long time. Pica also states that the marker is free of xylene and toluene. Surfaces and trades In its current product sheet Pica lists metal, wood, plastic, glass, paper, tiles, rubber and brick as suitable surfaces. In the earlier sheet for this model the manufacturer recommends it for automotive engineering, glaziers, locksmiths, mechanics, varnishers and woodwork. Colours and packaging Pica Classic 524 is available in six colours: green (524/36), red (524/40), blue (524/41), yellow (524/44), black (524/46) and white (524/52). This page is for the white marker 524/52. The manufacturer supplies the markers in trade packs of 10 per colour and also offers a display for the Classic line markers (item 66520) for shops. Other Pica Classic markers The paint marker belongs to the industrial marker group of the Pica Classic line. The manufacturer also offers the 520/521 permanent marker, the Instant White 522/532 marker and pen, the 528 XXL permanent marker and the 533/534 permanent pen - each for a different kind of marking. Technical specifications ManufacturerPica-Marker (PICA) Item number524/52 SeriesPica Classic 524 - industrial paint marker ColourWhite TipRound Line width2-4 mm PropertiesHighly opaque paint, extremely lightfast, quick-drying, hard to remove UseIndoors and outdoors CompositionFree of xylene and toluene SurfacesMetal, wood, plastic, glass, paper, tiles, rubber, brick Manufacturer's packaging10 markers per colour Questions and Answers Which surfaces is the marker suitable for? Pica lists metal, wood, plastic, glass, paper, tiles, rubber and brick. The manufacturer describes it as a marker for permanent marking on almost all surfaces. Can it be used outdoors? Yes. According to the manufacturer the marking is extremely lightfast and the marker is also suitable for outdoor use. Is the marking easy to remove? No. Pica describes the marking as hard to remove, so the marker suits labels that have to stay legible for a long time. Do not use it where the marking will need to be wiped off later. How wide is the line? The marker has a round tip. According to the manufacturer the line width is 2 to 4 mm, and the highly opaque paint gives a high-contrast mark. Does the paint dry quickly? Yes. The manufacturer describes the marker as quick-drying and the paint as highly opaque. Does the marker contain xylene or toluene? No. Pica states that the Classic 524 marker is free of xylene and toluene. Which colours does Pica Classic 524 come in? Six colours: green 524/36, red 524/40, blue 524/41, yellow 524/44, black 524/46 and white 524/52. This item is the white version. ..

Stanley PZ3 Screwdriver 0-65-338Description: The Stanley FatMax PZ3 Phillips screwdriver, 0-65-338, is a high-quality tool for any craftsman who values quality. The screwdriver is made of chrome-vanadium steel, which significantly reduces the risk of breakage while ensuring high torque. It features an ergonomic soft grip molded directly onto the base for greater stability and a long service life. It has laser-engraved size markings for easy identification among other tools. It features a hanging hole for secure storage. The base has an anti-corrosion coating, and the handle ensures a perfect grip for maximum comfort during use. Technical specifications:Profile: PZ3Type: PhillipsHandle type: SoftGripSize: 150 mmWeight: 158 g..

Stanley PZ4 Screwdriver 0-65-339Description: The Stanley FatMax PZ4 Phillips screwdriver, 0-65-339, is a high-quality tool for any craftsman who values quality. The screwdriver is made of chrome-vanadium steel, which significantly reduces the risk of breakage while ensuring high torque. It features an ergonomic soft grip molded directly onto the base for greater stability and a long service life. It has laser-engraved size markings for easy identification among other tools. It features a hanging hole for secure storage. The base has an anti-corrosion coating, and the handle ensures a perfect grip for maximum comfort during use. Technical specifications:Profile: PZ4Type: PhillipsHandle type: SoftGripSize: 200 mmWeight: 234 g..

Knipex 99 10 300 Rebar PliersDescription: Knipex 99 10 300 phosphate-coated rebar pliers are made of high-quality tool steel that is forged and oil-hardened, ensuring exceptional strength and durability. Their cutting edges are additionally hardened to a hardness of approximately 61 HRC, ensuring precision and efficiency during operation. With these pliers, you can twist and cut the wire in a single operation, which improves process efficiency. Their dimensions are specially selected to allow work in deep areas of the reinforcement. With a length of 300 mm and a cutting capacity of up to 3.8 mm, these pliers are suitable for various types of work in construction and metalworking. Technical specifications:Length, mm: 300 mmMaterial: hardened tool steelVDE tested at 1000V: noRockwell hardness: 61 HRCCutting capacity for medium-hard wire: 3.8 mmCutting capacity for hard wire: 2 mmCoating: phosphatedJaw coating: polishedManufacturing method: forged, hardenedStandard: DIN ISO 9242Weight: 0.501 kg..

The 42 mm copper pipe cutter is designed for precise, clean cuts with continuous adjustment. The four rollers ensure precise cutting and prevent material deformation; there is a spare blade in the wheel. The chrome-plated rollers provide protective support and shield the hand, extending the service life. Integrated cleaning tool...

Milwaukee 48229251 Copper Pipe Cutter (3 mm - 28 mm)• Patented adjustment mechanism. • Blades designed for 5 times longer life. • Chrome-plated rollers for added durability and extended performance, providing the best protection against rust. • Easy-grip knob for faster adjustment and easier one-handed operation. • Compact design for cutting pipes in hard-to-reach places. Technical Specifications: • Package dimensions: 3.1 / 12.1 / 14.5 cm • Maximum cutting capacity for copper pipe: 3-28 mm..