Filter
Your Cart

Hand tools - Page 48

Aluminum ladder for installation, repair..
Adjustable wrench for installation, repa..
Power Extension Cord for Workshops, Repa..
Adjustable wrench for repair, installati..
Gidoriya for cutting and repairing threa..
Pickaxes for construction, excavation, a..
Knife sharpener for a precise and contro..
Knives for precision cutting, installati..
Putty knives for precise preparation of ..
A trowel for smoothing plaster, render, ..
Trowel for precision work with construct..
Cable ties for cable management, install..
Pipe wrench - a secure grip when working..
Sheet metal shears for precise manual cu..
Chisels for precision woodworking and ro..
Hand truck for transporting loads in wor..
Pruning shears for precise pruning of gr..
Vacuum Grippers and Suction Cups: Reliab..
Sockets: A versatile tool for any projec..
Woodworking Tools: Reliable Solutions fo..
Pliers: A versatile tool for all kinds o..
Wrenches: Indispensable tools for any jo..
Carts: Indispensable Helpers for Any Wor..
Gedore and Gedore Sets: The Key to Profe..
Tool Sets: The Perfect Solution for Any ..
Toolboxes and Organizers: The Perfect So..
Craft knives - precise cutting for every..
Vise - an indispensable tool for stabili..
Taps and dies - precise creation and rep..
Sockets and Bits - Precision and Reliabi..
Riveter - Strong and Reliable Joining of..
Scissors - precision and convenience for..
Screwdrivers-an indispensable tool for e..
Saws - Precision Material Processing for..
Hand-held staplers - fast and reliable f..
Hand-held pipe and drain unclogging mach..
Hand-held pipe cutters - precise and eas..
Chisels - Power and Precision for Workin..
Specialized Hand Tools - Precision for S..
Clamps - Secure Clamping and Stability f..
Ratchets - precision, speed, and conveni..
Tripods and measuring rods - stability a..
Saws - precise and reliable cutting for ..
Tool Bags - Convenience, Organization, a..
Hammers - Power, Precision, and Versatil..
Trowels - Precision and a Polished Finis..
Brand: PICA Stock: In Stock
Pica Fine Dry Refill Leads, Red, 12 pcs - 7031 Pica 7031 is a tube of 12 red refill leads with a diameter of 0.9 mm for the Pica Fine Dry automatic pencil. The manufacturer offers the red and white Fine Dry leads for the best contrast on dark surfaces. Fine and precise marking Fine Dry refill leads are made for fine and precise marking. They are 60 mm long. Pica states that they are not suitable for glass-smooth, shiny surfaces, so on such materials another marker is the better choice. Tube with rotating lid The leads come in a tube with a rotating lid that allows quick removal of a lead. The label shows the colour, the Pica Fine Dry 0.9 pencil and the quantity - 12 leads, in several languages. The Pica Fine Dry pencil Pica Fine Dry (article 7070) is Pica's automatic pencil with a 0.9 mm lead - the Longlife Automatic Pencil 0.9. The manufacturer lists the graphite refills 7030 and 7050 for most surfaces, and the red and white ones for dark surfaces where a graphite line is hard to see. Leads for Fine Dry For light surfaces such as wood, plastic or metal Pica offers graphite refills HB (7030) and H (7050) in packs of 24, and for dark surfaces red (7031) and white (7032) in packs of 12. All versions are also available in a self-service bag (SB). The 0.9 mm leads are for Fine Dry only: the Pica Dry pencil uses 2.8 mm leads and BIG Dry uses rectangular 2 x 5 mm leads. Technical specifications ManufacturerPica-Marker Article7031 RangePica Fine Dry TypeRefill leads CompatibilityPica Fine Dry 0.9 mm ColourRed Diameter0.9 mm Length60 mm Quantity12 Suited toDark surfaces Not suited toGlass-smooth, shiny surfaces PackTube with rotating lid Questions and Answers Which pencil are the leads for? The leads are for the Pica Fine Dry automatic pencil with 0.9 mm lead. How many leads are there and what size are they? The tube holds 12 red leads, 0.9 mm in diameter and 60 mm long. Why red leads? Pica offers the red and white Fine Dry leads for the best contrast on dark surfaces. For light surfaces there are the graphite HB and H leads. Do they write on glass or shiny surfaces? The manufacturer states that Fine Dry leads are not suitable for glass-smooth, shiny surfaces. Which other leads are there for Fine Dry? Graphite HB (7030) and H (7050) in packs of 24, and white (7032) in packs of 12. All are also available in a self-service bag. How is a lead taken out of the pack? The tube has a rotating lid which, according to Pica, allows quick removal of a lead. Do they fit Pica Dry or BIG Dry? No. The 0.9 mm leads are for Fine Dry, while Pica Dry uses 2.8 mm leads and BIG Dry uses rectangular 2 x 5 mm leads. ..
-12%
4.50€ 5.11€
Ex Tax:3.75€
Add to Cart
Brand: PICA Stock: In Stock
Refill Leads for Pica Fine Dry, White, Ø0.9 mm, 12 Pieces - 7032 Pica 7032 is a box of 12 white refill leads for the Pica Fine Dry automatic pencil. The leads are 0.9 mm in diameter and 60 mm long and are intended for fine and precise marking. The white colour is for dark surfaces - the manufacturer introduces the coloured leads as new for best contrast on dark materials. Box with a rotating lid The leads come in a box with a rotating lid that, according to the manufacturer, allows quick removal. The box is printed with the colour (White), the model Pica Fine Dry 0.9 and the count - 12 leads. Limitations Pica states that Fine Dry refills are not suitable for glass-smooth, shiny surfaces. According to the manufacturer all Fine Dry refills are temperature-resistant up to 70 °C. Inserting into the pencil To protect the mechanism, the manufacturer recommends always inserting the refills from the rear. About the Pica Fine Dry The Pica Fine Dry (art. 7070) is an automatic pencil with a 0.9 mm lead for precise marking without sharpening. It has a push mechanism for automatic lead feed in a stainless steel tube, a large integrated eraser, an ergonomic grip zone, a holster with a special clip for one-hand operation and effective dust and moisture protection. The pencil comes with 5 HB graphite leads. Other refills for Fine Dry For light-coloured surfaces such as wood, plastic or metal the manufacturer offers HB (7030) and H (7050) graphite leads in packs of 24, and for dark surfaces coloured red (7031) and white (7032) leads in packs of 12. All versions are also available in self-service bags - the white ones as 7032/SB. Technical specifications ManufacturerPica-Marker (PICA) Article7032 TypeColoured refill leads For pencilPica Fine Dry (art. 7070) ColourWhite Quantity12 leads Diameter0.9 mm Length60 mm Intended useDark surfaces, fine and precise marking Temperature resistanceUp to 70 °C LimitationNot suitable for glass-smooth, shiny surfaces PackagingBox with rotating lid Questions and Answers Which pencil are these leads for? For the Pica Fine Dry automatic pencil (art. 7070). The leads are 0.9 mm in diameter and 60 mm long. How many leads are in the box? 12 white leads. The HB (7030) and H (7050) graphite leads for the Fine Dry come in packs of 24, the coloured red (7031) and white (7032) leads in packs of 12. Which surfaces are the white leads for? The manufacturer intends them for dark surfaces, where they give the best contrast. For light surfaces such as wood, plastic or metal Pica recommends the HB and H graphite leads. Do they mark glass-smooth, shiny surfaces? No. Pica states that Fine Dry refills are not suitable for glass-smooth, shiny surfaces. Do they withstand high temperatures? According to the manufacturer all Fine Dry refills are temperature-resistant up to 70 °C. How are they inserted into the pencil? The manufacturer recommends always inserting the leads into the pencil from the rear to protect the mechanism. Is there a blister or bag version? Yes, Pica offers all Fine Dry refills in self-service bags as well; the white leads are article 7032/SB. ..
-12%
4.50€ 5.11€
Ex Tax:3.75€
Add to Cart
Brand: PICA Stock: In Stock
Pica VISOR permanent Marker, Blue - 990/41 Pica VISOR permanent 990/41 is a refillable industrial marker with a blue marking lead, a twist mechanism and a side holster with clip. The manufacturer Pica-Marker describes it as particularly suited to rough or wet surfaces outdoors: thanks to the high contrast, markings do not fade even in bad weather, and the lead never dries out. The photo shows the marker in its holster and without it. Mechanism and holster The lead is advanced by a patented twist mechanism, and the holster with clip allows one-handed operation. Pica highlights the quality of workmanship and mechanics, the ergonomic grip zone and the long service life. Because it is refillable, according to the manufacturer one lead replaces up to 5 conventional ink or paint markers. The marking lead The lead has a diameter of 10 mm and a length of 85 mm. The manufacturer describes it as a waterproof marking crayon, extremely hard-wearing and suited to outdoor work. The lead temperature should not exceed 40 °C. The blue lead is chloride-free - Pica names it, together with the white and black, as suitable for marking stainless steel. Refilling Pica VISOR permanent refill leads are sold separately in 7 colours. For the blue marker the manufacturer offers the 991/41 refill leads. Surfaces and colours Pica lists metal, rubber, wet rubber, plastic, tiles, glass, wet wood, brick and leather as suitable. In its earlier product sheet the manufacturer rates the marker as ideal for metal, processed wood, plastic, glass, tiles and ceramics and for dry and wet rubber, and as suitable for stone and concrete, raw wood and leather. VISOR permanent is made in seven colours: red (990/40), green (990/36), blue (990/41), yellow (990/44), black (990/46), white (990/52) and orange (990/054). Technical specifications ManufacturerPica-Marker Article990/41 RangePica VISOR permanent TypeRefillable permanent industrial marker Lead colourBlue Lead diameter10 mm Lead length85 mm MechanismPatented twist mechanism HolsterSide holster with clip Chloride-freeYes (manufacturer's data) Lead temperatureNot above 40 °C Refill leads991/41 SurfacesMetal, rubber, wet rubber, plastic, tiles, glass, wet wood, brick, leather Manufacturer's pack5 pieces Questions and Answers How is the marker refilled? The marker is designed to be refilled with Pica VISOR permanent replacement leads. For this colour the manufacturer offers the 991/41 refill leads, sold separately. Does the lead dry out if the marker is left open? No. The manufacturer states that the VISOR permanent lead never dries out and the marker is ready to work from the first to the last line. Is it suitable for marking stainless steel? Yes. Pica names the blue, white and black leads as chloride-free and suitable for marking stainless steel, and this marker is blue. Can it be used outdoors and on wet surfaces? Yes, Pica describes the marker as particularly suited to rough or wet surfaces outdoors. The lead is a waterproof marking crayon, and markings do not fade even in bad weather. What are the lead dimensions? The lead has a diameter of 10 mm and a length of 85 mm, according to the manufacturer. Is there a temperature limit? The manufacturer states that the lead temperature should not exceed 40 °C. The marker should therefore not be left in very hot places. Which colours does VISOR permanent come in? Seven colours: red 990/40, green 990/36, blue 990/41, yellow 990/44, black 990/46, white 990/52 and orange 990/054. This item is the blue marker. ..
-10%
9.50€ 10.54€
Ex Tax:7.92€
Add to Cart
Brand: PICA Stock: In Stock
Pica VISOR permanent Marker, White - 990/52 Pica VISOR permanent 990/52 is a refillable industrial marker with a white marking lead, a twist mechanism and a side holster with clip. The manufacturer Pica-Marker describes it as particularly suited to rough or wet surfaces outdoors: thanks to the high contrast, markings do not fade even in bad weather, and the lead never dries out. The photo shows the marker in its holster and without it. Mechanism and holster The lead is advanced by a patented twist mechanism, and the holster with clip allows one-handed operation. Pica highlights the quality of workmanship and mechanics, the ergonomic grip zone and the long service life. Because it is refillable, according to the manufacturer one lead replaces up to 5 conventional ink or paint markers. The marking lead The lead has a diameter of 10 mm and a length of 85 mm. The manufacturer describes it as a waterproof marking crayon, extremely hard-wearing and suited to outdoor work. The lead temperature should not exceed 40 °C. The white lead is chloride-free - Pica names it, together with the blue and black, as suitable for marking stainless steel. Refilling Pica VISOR permanent refill leads are sold separately in 7 colours. For the white marker the manufacturer offers the 991/52 refill leads. Surfaces and colours Pica lists metal, rubber, wet rubber, plastic, tiles, glass, wet wood, brick and leather as suitable. In its earlier product sheet the manufacturer rates the marker as ideal for metal, processed wood, plastic, glass, tiles and ceramics and for dry and wet rubber, and as suitable for stone and concrete, raw wood and leather. VISOR permanent is made in seven colours: red (990/40), green (990/36), blue (990/41), yellow (990/44), black (990/46), white (990/52) and orange (990/054). Technical specifications ManufacturerPica-Marker Article990/52 RangePica VISOR permanent TypeRefillable permanent industrial marker Lead colourWhite Lead diameter10 mm Lead length85 mm MechanismPatented twist mechanism HolsterSide holster with clip Chloride-freeYes (manufacturer's data) Lead temperatureNot above 40 °C Refill leads991/52 SurfacesMetal, rubber, wet rubber, plastic, tiles, glass, wet wood, brick, leather Manufacturer's pack5 pieces Questions and Answers How is the marker refilled? The marker is designed to be refilled with Pica VISOR permanent replacement leads. For this colour the manufacturer offers the 991/52 refill leads, sold separately. Does the lead dry out if the marker is left open? No. The manufacturer states that the VISOR permanent lead never dries out and the marker is ready to work from the first to the last line. Is it suitable for marking stainless steel? Yes. Pica names the blue, white and black leads as chloride-free and suitable for marking stainless steel, and this marker is white. Can it be used outdoors and on wet surfaces? Yes, Pica describes the marker as particularly suited to rough or wet surfaces outdoors. The lead is a waterproof marking crayon, and markings do not fade even in bad weather. What are the lead dimensions? The lead has a diameter of 10 mm and a length of 85 mm, according to the manufacturer. Is there a temperature limit? The manufacturer states that the lead temperature should not exceed 40 °C. The marker should therefore not be left in very hot places. Which colours does VISOR permanent come in? Seven colours: red 990/40, green 990/36, blue 990/41, yellow 990/44, black 990/46, white 990/52 and orange 990/054. This item is the white marker. ..
-10%
9.50€ 10.54€
Ex Tax:7.92€
Add to Cart
Brand: PICA Stock: In Stock
Pica VISOR permanent Marker, Yellow - 990/44 Pica VISOR permanent 990/44 is a refillable industrial marker with a yellow marking lead, a twist mechanism and a side holster with clip. The manufacturer Pica-Marker describes it as particularly suited to rough or wet surfaces outdoors: thanks to the high contrast, markings do not fade even in bad weather, and the lead never dries out. The photo shows the marker in its holster and without it. Mechanism and holster The lead is advanced by a patented twist mechanism, and the holster with clip allows one-handed operation. Pica highlights the quality of workmanship and mechanics, the ergonomic grip zone and the long service life. Because it is refillable, according to the manufacturer one lead replaces up to 5 conventional ink or paint markers. The marking lead The lead has a diameter of 10 mm and a length of 85 mm. The manufacturer describes it as a waterproof marking crayon, extremely hard-wearing and suited to outdoor work. The lead temperature should not exceed 40 °C. For marking stainless steel Pica names the blue, white and black leads as chloride-free - yellow is not among them. Refilling Pica VISOR permanent refill leads are sold separately in 7 colours. For the yellow marker the manufacturer offers the 991/44 refill leads. Surfaces and colours Pica lists metal, rubber, wet rubber, plastic, tiles, glass, wet wood, brick and leather as suitable. In its earlier product sheet the manufacturer rates the marker as ideal for metal, processed wood, plastic, glass, tiles and ceramics and for dry and wet rubber, and as suitable for stone and concrete, raw wood and leather. VISOR permanent is made in seven colours: red (990/40), green (990/36), blue (990/41), yellow (990/44), black (990/46), white (990/52) and orange (990/054). Technical specifications ManufacturerPica-Marker Article990/44 RangePica VISOR permanent TypeRefillable permanent industrial marker Lead colourYellow Lead diameter10 mm Lead length85 mm MechanismPatented twist mechanism HolsterSide holster with clip Chloride-freeNot stated by the manufacturer Lead temperatureNot above 40 °C Refill leads991/44 SurfacesMetal, rubber, wet rubber, plastic, tiles, glass, wet wood, brick, leather Manufacturer's pack5 pieces Questions and Answers How is the marker refilled? The marker is designed to be refilled with Pica VISOR permanent replacement leads. For this colour the manufacturer offers the 991/44 refill leads, sold separately. Does the lead dry out if the marker is left open? No. The manufacturer states that the VISOR permanent lead never dries out and the marker is ready to work from the first to the last line. Is it suitable for marking stainless steel? Pica names only the blue, white and black leads as chloride-free and suitable for stainless steel. Yellow is not on that list, so for stainless steel choose one of those three colours. Can it be used outdoors and on wet surfaces? Yes, Pica describes the marker as particularly suited to rough or wet surfaces outdoors. The lead is a waterproof marking crayon, and markings do not fade even in bad weather. What are the lead dimensions? The lead has a diameter of 10 mm and a length of 85 mm, according to the manufacturer. Is there a temperature limit? The manufacturer states that the lead temperature should not exceed 40 °C. The marker should therefore not be left in very hot places. Which colours does VISOR permanent come in? Seven colours: red 990/40, green 990/36, blue 990/41, yellow 990/44, black 990/46, white 990/52 and orange 990/054. This item is the yellow marker. ..
-10%
9.50€ 10.54€
Ex Tax:7.92€
Add to Cart
Brand: Dewalt Stock: Delivery in 1-3 days
Dewalt DT70518T Impact Driver Bit Set and Magnetic Extension for Working at Angles Up to 20 Degrees. 10-piece set with a torque capacity of up to 205 Nm..
12.78€
Ex Tax:10.65€
Add to Cart
Brand: Makita Stock: In Stock
Makita P-46953 Hex Socket Set. 5/16"-3/4" Contents: impact sockets - 5/16", 11/16", 3/4", 8 mm, 10 mm, 13 mm, 17 mm, 19 mm, 21 mm. Supplied in a plastic case. ..
-22%
30.68€ 39.24€
Ex Tax:25.57€
Add to Cart
Brand: Rennsteig Stock: In Stock
Rennsteig 425 170 0 Cylindrical Spline PliersDescription: The Rennsteig 425 1700 cotter pin removal set includes 6 pieces of various sizes, designed for removing bolts, rivets, cotter pins, or other fasteners from through holes. Each tool in the set is made of hardened, high-alloy tool steel, which ensures durability and strength. The special protective striking head with rounded edges is designed to prevent splitting and deformation of the material during impact. This is particularly important when working with fragile or sensitive materials. The tool tips are highly polished and feature a gold coating, which improves their durability and corrosion resistance. Thanks to its high-quality construction and specialized features, this split pin removal set is a reliable tool for professional use. Technical specifications:Shank: hexagonalMaterial: tool steelQuantity per package: 6 pcsWeight: 0.520 kgSet includes:1 x bit - 3 mm1 x bit - 4 mm1 x bit - 5 mm1 x 6 mm bit1 x 8 mm bit1 x bit - 10 mm..
-17%
29.84€ 35.79€
Ex Tax:24.87€
Brand: Rennsteig Stock: In Stock
Rennsteig 470 900 3 Bolt Extractor SetDescription: The Rennsteig 470 900 3 bolt removal set is an indispensable tool for any professional or hobbyist who encounters broken screws or bolts. With its 5 pieces covering sizes from M3 to M18, this set offers a wide range of problem-solving options. Made of high-quality, hardened chrome-vanadium steel, each piece in the set is exceptionally strong and durable. They are specially designed to extract broken screws or bolts from threaded holes while protecting the thread from damage. Thanks to the variety of sizes, from M3 to M18, this set is ideal for various applications and situations. Technical specifications:Quantity per set: 5Size: M3 - M18Material: chrome-vanadium steelWeight: 0.110 kgSet includes:1 x Bolt extractor M3 - M6 mm1 x Bolt extractor M6 - M8 mm1 x Bolt extractor M8-M11 mm1 x Bolt extractor M11-M14 mm1 x Bolt extractor M14-M18 mm..
-19%
14.83€ 18.25€
Ex Tax:12.36€
Add to Cart
Brand: Rennsteig Stock: In Stock
Rennsteig 330 200 1 AwlDescription: The Rennsteig 330 200 1 awl is a professional tool designed primarily for use in the construction industry. It is made of high-quality high-alloy tool steel, which ensures exceptional strength and a long service life. The octagonal shape of the handle ensures a secure and comfortable grip during use. The tool is fully hardened, allowing for maximum efficient transfer of impact force, as well as the ability to repeatedly resharpen the working tip without loss of quality. The chisel is equipped with a special protective impact head that prevents splitting and deformation of the material during prolonged and intensive use. The gold coating not only provides an aesthetic appearance but also contributes to additional protection against corrosion. The tool meets or exceeds the requirements of current standards, such as DIN, and is certified with the GS mark for safety and quality. Technical specifications:Shape: OctagonalMaterial: High-alloy tool steelCoating: GoldLength: 200 mmProfile: 16 mmWeight: 280 g..
-21%
9.71€ 12.27€
Ex Tax:8.09€
Add to Cart
Brand: Rennsteig Stock: In Stock
Rennsteig 330 250 0 AwlDescription: The Rennsteig 330 250 0 awl is a professional tool designed primarily for use in the construction industry. It is made of high-quality high-alloy tool steel, which ensures exceptional strength and a long service life. The octagonal shape of the handle ensures a secure and comfortable grip during use. The tool is fully hardened, allowing for maximum efficient transfer of impact force, as well as the ability to repeatedly resharpen the working tip without loss of quality. The chisel is equipped with a special protective impact head that prevents splitting and deformation of the material during prolonged and intensive use. The gold plating not only provides an aesthetic appearance but also contributes to additional protection against corrosion. The tool meets or exceeds the requirements of current standards, such as DIN, and is certified with the GS mark for safety and quality. Technical specifications:Shape: OctagonalMaterial: High-alloy tool steelCoating: GoldLength: 250 mmProfile: 18 mmWeight: 350 g..
10.26€
Ex Tax:8.55€
Add to Cart
Brand: Bosch Stock: In Stock
Bosch 1600A016ZH Craft Knife Replacement BladesDescription: The Bosch 1600A016ZH replacement blades set contains 10 high-quality craft knife blades in a convenient plastic storage case. The 18 mm blade can be easily replaced without tools, providing a clean cut in various materials. Technical specifications:Length: 173 mmBlade width: 18 mmType: TrapezoidalQuantity per package: 10 pcs..
-16%
5.78€ 6.92€
Ex Tax:4.82€
Add to Cart
Brand: Bosch Stock: In Stock
Bosch 1600A01V3J Replacement Blades for Craft KnifeDescription: The Bosch 1600A01V3J replacement blades contain 50 high-quality craft knife blades in a convenient plastic storage case. They are made of high-quality S2 CVM steel and have a trapezoidal shape. They are compatible with all Bosch Professional utility knives, and the 18 mm blade can be easily replaced without tools, offering a clean cut in various materials. Technical specifications:Length: 63 mmBlade width: 18 mmType: TrapezoidalQuantity per package: 50 pcs..
-18%
18.89€ 23.10€
Ex Tax:15.74€
Add to Cart
Roller rubberized anti-impact Stanley FatMax FMHT0-33864 with magnet 5 m Roller rubberized anti-impact Stanley FatMax FMHT0-33864 with magnet 5 m
Second hand 🔥 Bestseller Label BLACK FRIDAY -57%
Brand: Stanley Stock: In Stock
• Magnetic tip with patented Multi-Catch design • Designed for single-person use on metal and non-metal surfaces • Patented 32mm measuring tape width • 3.4m extension before breaking • Patented world-class Mylar coating (10x stronger blade protection). Patented bimetal body for durability and comfort • Ergonomic, comfortable with non-slip grip • For maximum durability, bright and legible markings, and reduced breakage • Patented world-class Blade Armor protection (90% reduced risk of breakage) • Bright and legible markings with clear graphics and numbers • Tru-Zero tip for accurate internal and external measurements...
-57%
12.65€ 29.14€
Ex Tax:10.54€
Add to Cart
Brand: Stanley Stock: In Stock
Stanley Tape Measure 0-33-726Description: The Stanley 0-33-726 tape measure features a high-quality Mylar -coated blade, making it exceptionally durable and abrasion-resistant. Compared to standard lacquered blades, the Mylar -coated blade on the Stanley 0-33-726 is up to 10 times more durable. The blade is equipped with a blade guard covering the first 100 cm , which significantly reduces the risk of tape breakage by 95% . With a width of 32 mm , the Stanley 0-33-726 blade is suitable for reading measurements with ease and convenience. It is 8 m long and features a locking mechanism for greater convenience during use. Technical specifications:Length: 8 mWidth: 32 mmAccuracy class:II..
-41%
22.50€ 38.35€
Ex Tax:18.75€
Add to Cart
Brand: Stanley Stock: In Stock
Stanley Tape Measure 1-30-687Description: The Stanley 1-30-687 tape measure is made of durable plastic, making it lightweight and comfortable to use. The rubberized body fits comfortably in the hand and is manufactured using Tylon technology, which makes the tape stronger and more wear-resistant than traditional tapes. For ease of use, the tape measure body features a locking mechanism that secures the tape in the desired position. The tape has a matte finish that reduces glare for easy reading. Equipped with a belt hook for easy storage while working. Technical Specifications:Tape length: 3 mTape width: 12.7 mmTape material: TylonHousing material: Bi-material with rubberized coatingLocking mechanism: YesAutomatic tape retraction: YesWeight: 0.2 kg..
-22%
3.63€ 4.68€
Ex Tax:3.03€
Add to Cart
Brand: Stanley Stock: In Stock
Compatible with Stanley and OLFA 45 mm round blades, ideal for cutting fabric. Ergonomic, textured handle. Suitable for both right- and left-handed use. Durable, well-sharpened round blades.Length, mm: 170.00 mm Brand: Stanley Model: STHT0-10194 Series: Stanley Weight: 0.07 kg..
-15%
11.50€ 13.60€
Ex Tax:9.58€
Add to Cart
Brand: Stanley Stock: In Stock
Hardened teeth. Wooden handle, reversible, secured to the blade with sturdy bolts. Wide blade for more comfortable cutting.Manufacturer's barcode: 3253560152529 Length, mm: 250.00 mm Brand: Stanley Model: 0-15-252 Series: FatMax Weight: 0.31 kg..
-21%
7.17€ 9.13€
Ex Tax:5.98€
Add to Cart
Brand: Bosch Stock: In Stock
Bosch Professional 1600A039T3 Screwdriver, PH1 x 75 mm The Bosch 1600A039T3 is a Phillips screwdriver with a PH1 profile and a 75 mm shank from Bosch's professional hand-tool range. The manufacturer designed it for professionals who need a robust tool delivering high power transfer with less strain at work. Chrome-vanadium steel shaft The shaft is made from chrome-vanadium steel for strength and resistance to high torque. Bosch states that the screwdriver withstands torque up to 20% above the requirements of the ISO 8764 standard. The overall length of the tool is 177 mm and the shank diameter is 5 mm. Two-component handle The handle is two-component, 29 mm in diameter, with soft-grip areas for outstanding power transfer and less strain on the hand. The hexagonal handle front prevents the screwdriver from rolling off a sloping surface - a small detail that saves time and dropped tools on scaffolding. Colour coding and markings The handle carries colour coding and type and size markings so the screwdriver you need is found immediately in a case or a rack. The end of the handle has a tether hole, so the tool can be kept attached when working at heights. Applications The screwdriver is intended for manual driving and removing of screws in assembly, electrical installation, maintenance and repair. The PH1 profile determines which screw heads it suits, and the 75 mm shank determines how deep it reaches. Where this article sits in the Bosch range The Bosch Professional single screwdriver range comes in several profiles and sizes. The closest versions to this article are PH2 x 100 mm (1600A039T4). Since all the screwdrivers in the range look alike, the part number and the marking on the handle are the only reliable way to tell them apart. Packaging According to the manufacturer the article is supplied in cardboard hanger packaging with a Euro hole, and the pack quantity is one piece. The EAN for this part number is 4059952736020. Technical specifications ManufacturerBosch Professional Part number1600A039T3 EAN4059952736020 Screwdriver profilePH1 Overall length177 mm Shank length75 mm Shank diameter5 mm Handle diameter29 mm Shaft materialChrome vanadium HandleMulti-component, two-component Anti roll-off designYes Colour codingYes Tether holeYes Torque vs. standard+20% StandardISO 8764 Weight0.050 kg Packaging type per BoschCardboard packaging, hanger, with Euro hole Pack quantity per Bosch1 pc Questions and Answers What is the profile and size of the screwdriver? Article 1600A039T3 has a PH1 profile and a 75 mm shank. Bosch writes the version as PH1 x 75 mm. What is the overall length of the tool? The overall length is 177 mm, of which 75 mm is the shank. The shank diameter is 5 mm and the handle diameter is 29 mm. What material is the shaft made from? The shaft is made from chrome-vanadium steel. According to Bosch the screwdriver withstands torque up to 20% above the requirements of the ISO 8764 standard. What is the hexagonal handle front for? It is an anti roll-off design: the hexagon stops the screwdriver rolling off a sloping surface. Bosch lists it as a separate feature of the range. What is the hole in the handle for? It is a tether hole. It keeps the tool attached when working at heights so it cannot fall from scaffolding or a platform. How do I identify this exact size among the others in the range? All the screwdrivers in the range look alike. They are identified by the part number and by the type and size marking on the handle, supported by the colour coding. The closest versions are PH2 x 100 mm (1600A039T4). How much does the screwdriver weigh? According to Bosch the weight is 0.050 kg. The article is supplied in cardboard hanger packaging with a Euro hole, and the EAN for the part number is 4059952736020. ..
-17%
5.00€ 6.00€
Ex Tax:4.17€
Add to Cart
Brand: Bosch Stock: In Stock
Bosch Professional 1600A039T4 Screwdriver, PH2 x 100 mm The Bosch 1600A039T4 is a Phillips screwdriver with a PH2 profile and a 100 mm shank from Bosch's professional hand-tool range. The manufacturer designed it for professionals who need a robust tool delivering high power transfer with less strain at work. Chrome-vanadium steel shaft The shaft is made from chrome-vanadium steel for strength and resistance to high torque. Bosch states that the screwdriver withstands torque up to 20% above the requirements of the ISO 8764 standard. The overall length of the tool is 212 mm and the shank diameter is 6 mm. Two-component handle The handle is two-component, 34 mm in diameter, with soft-grip areas for outstanding power transfer and less strain on the hand. The hexagonal handle front prevents the screwdriver from rolling off a sloping surface - a small detail that saves time and dropped tools on scaffolding. Colour coding and markings The handle carries colour coding and type and size markings so the screwdriver you need is found immediately in a case or a rack. The end of the handle has a tether hole, so the tool can be kept attached when working at heights. Applications The screwdriver is intended for manual driving and removing of screws in assembly, electrical installation, maintenance and repair. The PH2 profile determines which screw heads it suits, and the 100 mm shank determines how deep it reaches. Where this article sits in the Bosch range The Bosch Professional single screwdriver range comes in several profiles and sizes. The closest versions to this article are PH1 x 75 mm (1600A039T3). Since all the screwdrivers in the range look alike, the part number and the marking on the handle are the only reliable way to tell them apart. Packaging According to the manufacturer the article is supplied in cardboard hanger packaging with a Euro hole, and the pack quantity is one piece. The EAN for this part number is 4059952736037. Technical specifications ManufacturerBosch Professional Part number1600A039T4 EAN4059952736037 Screwdriver profilePH2 Overall length212 mm Shank length100 mm Shank diameter6 mm Handle diameter34 mm Shaft materialChrome vanadium HandleMulti-component, two-component Anti roll-off designYes Colour codingYes Tether holeYes Torque vs. standard+20% StandardISO 8764 Weight0.092 kg Packaging type per BoschCardboard packaging, hanger, with Euro hole Pack quantity per Bosch1 pc Questions and Answers What is the profile and size of the screwdriver? Article 1600A039T4 has a PH2 profile and a 100 mm shank. Bosch writes the version as PH2 x 100 mm. What is the overall length of the tool? The overall length is 212 mm, of which 100 mm is the shank. The shank diameter is 6 mm and the handle diameter is 34 mm. What material is the shaft made from? The shaft is made from chrome-vanadium steel. According to Bosch the screwdriver withstands torque up to 20% above the requirements of the ISO 8764 standard. What is the hexagonal handle front for? It is an anti roll-off design: the hexagon stops the screwdriver rolling off a sloping surface. Bosch lists it as a separate feature of the range. What is the hole in the handle for? It is a tether hole. It keeps the tool attached when working at heights so it cannot fall from scaffolding or a platform. How do I identify this exact size among the others in the range? All the screwdrivers in the range look alike. They are identified by the part number and by the type and size marking on the handle, supported by the colour coding. The closest versions are PH1 x 75 mm (1600A039T3). How much does the screwdriver weigh? According to Bosch the weight is 0.092 kg. The article is supplied in cardboard hanger packaging with a Euro hole, and the EAN for the part number is 4059952736037. ..
-33%
4.60€ 6.89€
Ex Tax:3.83€
Add to Cart
Showing 941 to 960 of 2720 (136 Pages)
Product Filter