Woodworking machines - Page 3

Milwaukee M18FMS305-0 Cordless Plunge SawMilwaukee® has designed and integrated a brushless POWERSTATETM motor for up to twice the motor life and up to 25% more power. The HIGH OUTPUTTM tool system takes M18 FUELTM technology to a new level and delivers increased performance and runtime. These tools are designed to maximize compatibility with HIGH OUTPUTTM batteries. The tool's large guides provide maximum support for cutting any material, ensuring stability and precision. The cutting depth adjustment feature allows you to make small cuts or grooves in the workpiece. ONE-KEYTM Tool Tracking and Securing offers a free cloud-based tracking network and management platform for your tools. ONE-KEYTM also features remote locking capabilities. The built-in handle allows you to easily move the device. A steel plate with preset angles ensures repeatability and precision of cuts. Work surface lighting with a built-in LED. Runs on MILWAUKEE® M18TM High Output batteries. Comes without batteries or a charger. Technical specifications:Voltage: 18V;Battery type: Li-ion;Tilt capacity (left): 48°;Bevel capacity (right): 48°;Bevel angle: 55/60°;Blade diameter: 305 mm;Bore size: 30 mm;Cutting depth: 97 mm;Maximum speed: 0-3600 rpm;Max. cutting capacity 90°/90° (width and height): 343 x 97 mm;Max. cutting capacity 90°/45° (width and height): 343 x 65 mm;Max. cutting capacity 45°/90° (width and height): 235 x 97 mm;Noise level: 107.5 dB;Weight: 22 kg.[embed]https://www.youtube.com/watch?v=8TMyfpj0sjU&t;=3s[/embed]..

Manufacturer: Milwaukee Model: M18FTS210-0 Warranty: 3 years after registration on the website Body only-battery and charger not included! Description: The ONE-KEYTM M18 FUELTM table saw delivers the power to cut at the same feed rate as an equivalent reciprocating saw, capable of cutting 190 m of 19 mm OSB board on a single charge of the 12.0 Ah battery. ONE-KEYTM tool tracking and security offers a cloud-based inventory management platform that supports both location tracking and theft prevention. Next-generation POWERSTATETM brushless motor: This is Milwaukee®'s most powerful motor, utilizing higher-grade magnets and 175% more copper compared to previous motors. The next-generation REDLINK PLUSTM intelligence system provides advanced digital overload protection for the tool and battery and uniquely enhances tool performance under load. The new REDLITHIUM-IONTM High OutputTM 12.0 Ah battery pack features superior pack design, electronics, and no-drain technology to deliver the most runtime per charge compared to any other Milwaukee® battery pack. The sliding gear-driven fence allows for precise and easy adjustment of the front fence on the saw, providing a 622 mm rip capacity. The 210 mm blade allows for a 63 mm cutting depth at 90 degrees. Quick-change guard and riving knife allow the user to remove and adjust the riving knife and guard without having to remove the throat. The built-in carrying handle allows for easy transport to and from the job site. On-board storage for all table attachments. The included vacuum adapter fits directly onto all Milwaukee® dust collectors. Technical Specifications: Battery Type: Li-ion Bevel Capacity: 47° Blade Diameter: 210 mm Cutting depth: 63.5 mm No-load speed: 6300 rpm Cutting capacity: 622 mm Sound power level: 103.4 dB (A) Sound power level uncertainty: 3 dB (A) Sound pressure level: 92.4 dB (A) Sound pressure level uncertainty: 3 dB (A) Voltage: 18 V ..

Milwaukee M12 ONEFTR38-201C Cordless Torque WrenchDescription: The Milwaukee M12 ONEFTR38-201C cordless torque wrench delivers up to 50% faster installation compared to hand tools. This allows the user to complete tasks more efficiently and with less effort. With a powerful brushless POWERSTATETM motor, REDLITHIUMTM battery, and REDLINK PLUSTM electronic intelligence, it delivers exceptional power, runtime, and durability. It offers a torque range from 13.6 Nm to 135.6 Nm with an accuracy of ±2% . This ensures reliable tightening of fasteners with critical torque and prevents over- or under-tightening. With ONE-KEYTM technology, the user can record torque, providing torque data and adaptive reports for inspectors or owners, which improves job tracking and documentation. It features an adjustable torque output that allows control of the tool's output torque through the motor. With four torque measurement modes: ft-lb, in-lb, Nm, and kg-cm . The tool is available in six languages, including English, Spanish, and French. Four notification modes indicate when the tool reaches, meets, or exceeds the target torque (audible, LED, LCD, and vibration). Tightening is easy in two steps: Pull the trigger until the tool stops just before the target torque value, then finish by hand to reach the target torque.Technical Specifications:Voltage: 12 VBattery type: Li-ionAccuracy: CW ±2%, CCW ±3%Max. torque: 135.6 NmTorque range: 13.6 - 135.6 NmNo-load speed: 0 - 100 rpmChuck: 3/8" squareSound power level: 90.99 dBAWeight (EPTA): 2.5 kgIncluded:1 x C12 C charger1 xM12 B2 battery1 x Kitboxhttps://youtu.be/ddfE0VrTDdQ..

Dewalt DCS377NT 18V XR Cordless Handheld Circular SawThe Dewalt DCS377NT is optimized for one-handed use thanks to its lightweight and well-balanced design, which makes it easier to cut in tight spaces. The tool features variable speed control with a range of 150-380 SFPM, allowing you to adjust the speed depending on the application. Suitable for cutting metal lengths, including threaded rod, Unistrut, and steel piping. Produces little to no sparks when cutting metal. Smooth cuts leave surfaces free of cracks.Comes without a battery or charger. Technical specifications:Voltage: 18 V;Output power: 350 W;Battery type: Li-Ion;Brushless motor: YES;No-load speed: 150-380 rpm;Maximum cutting depth: 46 mm;Hand/arm vibration - metal: 2.5 m/s2;Uncertainty K 1 (vibration): 1.5 m/s2;Sound power: 88 dB;Blade length: 686-692 mm;Overall length: 320 mm;Weight: 3 kg.The set includes:Machine: Dewalt DCS377NT;TSTAK storage and carrying case: 1 pc...

DEWALT DCS391N 18V XR Lithium-Ion Battery, Circular Saw (Body Only) Comes without batteries, charger, or carrying case!!!- Latest premium-generation circular saw featuring new XR lithium-ion technology- Part of the intelligent XR lithium-ion series designed for efficiency and faster completionof projects- Powerful & Highly Efficient DCS391 DEWALT motor with cooling fans and replaceable brushes delivers up to 3,700 RPM for fast cutting action -Ergonomic handle set with rubber overmold for optimal user comfort- Extremely durable tool design, including a magnesium base for repetitive, precise cuts- Smart trigger allows full control over all applications- Bevel angle and depth of cut adjustment with an easy-to-read scale for maximum cordless functionality- Spindle lock for quick and easy blade change-Lock-off switch and electronic motor brake for added control and safety-Ultra-thin 165 mm disc, 24-tooth carbide blade enables efficient, fast, and smooth cutting with a maximum cutting depth of55 mm- Improved ergonomic design and enlarged rubber grip for greater comfort-165 mm carbide blade (DT1209)Specifications:- Voltage: 18 V- Blade diameter: 165 mm - Blade bore: 20 mm- Output power: 460 Watts- No-load speed: 3700 rpm- Bevel capacity: 50°- Max. Cutting depth at 90°: 55 mm-Max. Cutting depth at 45°: 42.1 mm-Length x Height: 360 mm x 240 mm-Weight: 3.8 kg - Warranty: 3 years..