Hand tools - Page 9

Pica Classic 588 Chalk Holder, for 11-12 mm Chalks - 588-10 Pica Classic 588 is a high-quality chalk holder with a push mechanism, made for chalks 11-12 mm thick. The manufacturer offers it in its Classic Line as an accessory to its marking chalks. The chalk is gripped by a metal collet, and the body is made of sturdy plastic with an ergonomic shape. Ergonomic triangular shape The body has an ergonomically rounded triangular shape. It is made of impact-resistant ABS plastic, and the push button is in classic Pica green - in its product sheet the manufacturer describes it as a button in a signal colour. The black body is printed "Pica Classic 588 Kreidehalter - Crayon holder - Porte-craie". Push mechanism and metal collet The holder works with a push mechanism, and the chalk is held by a metal collet (in its earlier product sheet Pica calls it a metal clamp). In both of its product sheets Pica describes the holder as a high-quality product. Which chalks it takes The holder is for chalks from 11 to 12 mm thick. On the holder's page Pica lists its forester and signing chalks and its luminescent chalks as related products. Before buying, check the thickness of the chalk you use. Chalks in the Pica Classic range In the same chalk section Pica offers soapstone welding chalk (571), blackboard chalk (581), forester and signing chalks (590/591) and luminescent chalk (592). The thickness of each chalk is given in its own description - for the 588 holder it needs to be 11-12 mm. Which trades In its earlier product sheet Pica names the Classic 588 holder for building construction, underground construction and woodwork. Pica's packs Article 588-10 is Pica's designation for the Classic 588 holder with a trade pack of 10. The manufacturer also offers the holder in a hanging self-service blister - article 588/SB. The photo shows the holder itself without a chalk inserted. Technical specifications ManufacturerPica-Marker (PICA) Article588-10 RangePica Classic 588 (Classic Line) TypeChalk holder Suitable chalks11-12 mm thick MechanismPush button GripMetal collet BodyImpact-resistant ABS plastic ShapeErgonomically rounded triangular Button colourGreen (classic Pica green) Manufacturer's trade pack10 pieces (588-10); blister - 588/SB Questions and Answers Which chalks is the holder for? For chalks from 11 to 12 mm thick. The manufacturer gives this thickness in both its old and its new product sheet. Is a chalk included? Pica describes the article as a chalk holder and does not list a chalk in the contents. The photo shows the empty holder. What is the body made of? The body is made of impact-resistant ABS plastic, and the chalk is gripped by a metal collet. What mechanism does the holder have? The holder has a push mechanism. The button is in classic Pica green, which the manufacturer describes as a signal colour. What shape is the body? The manufacturer states an ergonomically rounded triangular shape. The body is black and printed Pica Classic 588. What does 588-10 mean, and is there a blister version? 588-10 is Pica's designation for the Classic 588 holder with a trade pack of 10. The manufacturer also offers the same holder in a hanging self-service blister under article 588/SB. Which chalks does Pica name for the holder? On the holder's page Pica lists the forester and signing chalks and the luminescent chalks as related products. Before buying, make sure the chalk is 11-12 mm thick. ..

DeWALT TOUGHSERIES Chalk Reel, 30 m, 6:1, DWHT48335-0 The DeWALT DWHT48335-0 is a chalk reel from the TOUGHSERIES range with a 30 m (100 ft) line and a 6:1 planetary gear. The manufacturer designs it for construction professionals and for tough conditions on demanding jobsites. Chalk is not included and is sold separately - DeWALT also offers the same reel as a kit with red chalk under the number DWHT48335RC-0. Line lock The new line lock holds the line tight while snapping, giving superior tension. The line can be tensioned without holding the string by hand, for a crisp mark. Bold braided line and 6:1 gear The TOUGHSERIES line is bold and braided - 1 mm thick according to DeWALT - and leaves a highly visible line. The 6:1 planetary gear rewinds smoothly and prevents the line from jamming, which the manufacturer says adds to the reel's long life. Maintenance and housing The rear access door allows quick, easy string replacement and internal upkeep. The flush handle is convenient for storage and stays in place, so the line does not unwind by accident. The housing is made of aluminium, in black and yellow. Applications DeWALT specifies the reel for marking clear chalk lines in roofing, framing and general construction. Technical specifications ManufacturerDeWALT ArticleDWHT48335-0 RangeTOUGHSERIES TypeChalk reel Line length30 m (100 ft) LineBraided, 1 mm GearPlanetary, 6:1 Line lockYes String replacementVia rear access door HousingAluminium, black/yellow Dimensions22.5 x 14.4 x 6.5 cm Weight0.31 kg ChalkNot included Questions and Answers Is chalk included? No. According to DeWALT the chalk is sold separately. The same reel is also available as a kit with red chalk under the number DWHT48335RC-0. How long is the line? The line is 30 m (100 ft) long. It is a braided TOUGHSERIES line, 1 mm thick according to the manufacturer. What does the 6:1 gear mean? The reel has a planetary gear with a 6:1 ratio. According to DeWALT it rewinds the line smoothly and prevents it from jamming. Can the line be locked? Yes. The line lock keeps the line tight while snapping, so there is no need to hold it by hand. Can the line be replaced? Yes. The rear access door allows quick and easy string replacement and internal upkeep. What is the housing made of and how heavy is the reel? The housing is aluminium. The reel measures 22.5 x 14.4 x 6.5 cm and weighs 0.31 kg according to DeWALT. What is the difference between DWHT48335-0 and DWHT48335RC-0? The reel is the same. DWHT48335RC-0 is the kit that, according to DeWALT, comes with red chalk, while DWHT48335-0 is the reel alone without chalk. ..

Rennsteig 210 40000 Flat ChiselDescription: The Rennsteig 210 40000 chisel is an excellent tool for chiseling and breaking up masonry, concrete, and soft rock. With a length of 400 mm and an SDS-max shank, it is easy to mount and use with compatible breakers.Made of high-quality steel, the chisel is durable and can withstand heavy loads. With a diameter of 18 mm and a tip width of 25 mm, it ensures effective chiseling and demolition of hard surfaces. Technical specifications:Length: 400 mmChuck: SDS maxDiameter: 18 mmTip width: 25 mmMaterial: steelWeight: 0.727 kg..

Rennsteig 212 25000 Flat ChiselDescription: The Rennsteig 212 25000 chisel is a reliable tool for chiseling and breaking up various materials such as masonry, concrete, and soft rock. With a length of 250 mm and an SDS+ shank, it is easy to mount and use with compatible breakers. Made of high-quality steel, the chisel is durable and load-resistant. With a diameter of 14 mm and a tip width of 20 mm, it ensures effective chiseling and demolition while maintaining precision. Technical specifications:Length: 250 mmChuck: SDS plusDiameter: 14 mmTip width: 20 mmMaterial: steelWeight: 0.248 kg..

Pica BIG Dry Civil Engineering Refill Leads for Wet Cutting, 12 Pieces - 6040 Pica BIG Dry 6040 is a set of 12 refill leads for the Pica BIG Dry automatic construction pencil, which the manufacturer calls Civil Engineering Leads (Tiefbauminen in German). The box holds 4 pink, 4 blue and 4 white leads. They are water jet resistant and permanent and designed for wet cutting of tiles and stone. The cross-section is a rectangular 2 x 5 mm and the length is 150 mm. Water jet resistant The marking from these leads withstands water and stays visible when the material is cut wet. Pica describes them as waterproof and permanent. The manufacturer warns to protect the leads from temperatures above 40 °C - the warning is also printed on the pack itself in several languages. Surfaces The manufacturer lists stone and wet stone, brick and wet brick, metal, wet wood and plastic as suitable surfaces. On its page Pica marks the article as available from the beginning of 2025, so it is a relatively new refill in the BIG Dry range. For the Pica BIG Dry The Pica BIG Dry is a construction pencil with a push mechanism for automatic lead feed, an integrated lead sharpener and maximum dust and moisture protection. The 2 x 5 mm leads allow precise edge guidance when marking. The manufacturer states that the refills are inserted into the pencil from the rear. Other refills for the BIG Dry Besides the wet-cutting leads, Pica offers For All universal leads with 2B graphite (6030, 6031, 6032, 6045), 2H carpenter leads for dry wood (6050), 10H stonemason leads for dry and rough brickwork (6055), the Aniline 2.0 all-weather leads for wet wood (6051) and summer leads stable up to 70 °C (6071) for the BIG Dry. All come in packs of 12, 150 mm long. Technical specifications ManufacturerPica-Marker (PICA) Article6040 EAN4262357550553 TypeCivil Engineering Leads (Tiefbauminen) For pencilPica BIG Dry Quantity12 leads Colours4 pink, 4 blue, 4 white Profile2 x 5 mm Length150 mm PropertiesWater jet resistant, permanent Intended useWet cutting of tiles and stone LimitationProtect from temperatures above 40 °C SurfacesStone, wet stone, brick, wet brick, metal, wet wood, plastic Questions and Answers Which pencil are these leads for? For the Pica BIG Dry automatic construction pencil. The leads have a rectangular 2 x 5 mm profile and are 150 mm long. Which colours are in the set? 12 leads: 4 pink, 4 blue and 4 white. The colours are also marked on the pack. Do they withstand water during wet cutting? Yes. The manufacturer describes them as water jet resistant and permanent and recommends them for wet cutting of tiles and stone. Is there a temperature limit? Yes, Pica warns to protect the leads from temperatures above 40 °C. For hot conditions the manufacturer offers the 6071 summer leads, stable up to 70 °C. Which surfaces do they mark? The manufacturer lists stone and wet stone, brick and wet brick, metal, wet wood and plastic. How are they inserted into the pencil? Pica states that BIG Dry refills are inserted from the rear. The leads have the same 2 x 5 mm profile as the other BIG Dry refills. Which other leads are available for the BIG Dry? For All universal 2B (6030, 6031, 6032, 6045), carpenter 2H (6050), stonemason 10H (6055), Aniline 2.0 for wet wood (6051) and summer leads up to 70 °C (6071) - all in packs of 12. ..

Knipex 26 26 200 Half-Round PliersDescription:Knipex 26 26 200 gripping pliers feature a sturdy construction and flexible, precision-ground tips, 200 mm in length, compliant with the 1000 V VDE safety standard. Their jaws are semi-circular and long, making them suitable for a variety of applications. The pliers are equipped with serrated gripping surfaces that ensure a secure grip on the material. The cutting edges of the pliers are designed for medium-hard wire with a maximum diameter of up to 3.2 mm and hard wire with a maximum diameter of up to 2.2 mm. The cutting edges are additionally induction-hardened to a hardness of approximately 61 HRC, ensuring long life and durability of the blades. They are made of vanadium steel, forged and oil-hardened, which provides exceptional strength and durability to the tool. These pliers are ideal for professional and home users who require reliability and quality when working with electrical installations and other types of materials. Technical specifications:Length, mm: 200 mmMaterial: CrV steelInsulation type: multi-component coatingVDE tested at 1000V: yesJaw shape: semi-circular curvedRockwell hardness: 61 HRCHard wire cutting capacity: 2.2 mmCutting capacity: 3.2 mmJaw coating: chrome-platedStandard: EN 60900Weight: 0.221 kg..

Bosch Professional Club Hammer 1000 g, 1 600 A03 AK9 The Bosch 1 600 A03 AK9 club hammer has a 1000 g head on a short handle, 260 mm overall. Bosch describes it as a tool for robust work with hand chisels: the short lever and the heavy head put the energy straight into the chisel rather than into the swing. The complete tool weighs 1.215 kg. Head and standard The head is carbon steel at HRC 50-58 with two flat striking faces. The hammer is built to DIN 6475 / ISO 15601, the standards for this type of short, heavy hammer, which fix the shape, the weight and the way the head is secured. Fibreglass-core handle On a tool used for the heaviest blows the handle is the most loaded part. This one has a fibreglass core at 65% content - it will not snap and it absorbs shock and vibration, which spares the wrist and elbow. A multi-component soft-grip handle is moulded over it. A tether hole at the end of the handle allows the tool to be secured when working at height. Dimensions Head height 40 mm, width 95 mm, overall length 260 mm. The short handle is what defines a club hammer - it is held close to the head and worked with short, controlled blows rather than the wide swing of a long-handled hammer. Applications Breaking masonry and render with a chisel, removing tiles, driving wedges, stakes and plugs, formwork assembly, demolition work. It is almost always used together with a hand chisel - flat, pointed or a jointing chisel. Do not strike hardened surfaces with it and do not use it as an anvil.Technical specifications BrandBosch Professional Part number1600 A03 AK9 EAN4059952737195 TypeClub hammer Head weight1000 g (1.00 kg) Total weight1.215 kg Length260 mm Height40 mm Width95 mm Head materialCarbon steel HardnessHRC 50-58 HandleMulti-component, fibreglass core Fibreglass ratio65% Tether holeYes StandardDIN 6475 / ISO 15601 Pack quantity1 pc PackagingCardboard packaging, hanger, with Euro hole Questions and Answers What is a club hammer and how does it differ from an ordinary hammer? A club hammer is a short hammer with a heavy head - 1000 g here, on a 260 mm overall length. It is held close to the head and worked with short blows. An ordinary engineer's hammer has a lighter head and a longer handle and is used for different work. What does the head weigh, and the whole tool? The head is 1000 g. The complete tool with the handle weighs 1.215 kg, according to Bosch. Is it suitable for use with a chisel? Yes - that is its main purpose. Bosch offers it specifically for robust work with hand chisels: flat, pointed and jointing chisels. What is the handle made of? The core is fibreglass at 65% content, with a multi-component soft-grip handle moulded over it. This construction absorbs the blow and will not snap the way a wooden handle can. Which standard is it built to? DIN 6475 / ISO 15601, the standards for this type of short heavy hammer. The head is carbon steel at HRC 50-58. Can it be tethered when working at height? Yes. There is a tether hole at the end of the handle for a lanyard. Can it be struck against another hammer or against hardened steel? No. A blow between two hardened surfaces can chip metal off. A club hammer is used on a chisel with a properly dressed head, or on a timber or plastic component. ..

Pica Dry Coloured Caps, 5 pcs - 55801 Pica 55801 is an accessory for the Pica Dry automatic pencil - a set of 5 coloured caps in white, yellow, red, blue and dark green. They let several Pica Dry pencils be told apart by colour - for example by the lead loaded in each - so the right pencil is found quickly. Contents and pack The bag holds one cap of each colour. The manufacturer packs the caps in clear bags with a hanging tab. Pica supplies them to dealers on a clip strip with 10 bags and a metal hook for hanging in the store, while the price here is for one bag of 5 caps. Which pencil they fit Pica presents the caps as an accessory for Pica Dry - the deep-hole automatic pencil (article 3030) that takes 2.8 mm leads. According to the manufacturer the pencil has a Power Lock mechanism for a stronger hold on the lead. Pica Dry can be loaded with different leads: water-soluble Multi-Use 2B, water-jet-resistant special leads, carpenter leads H and summer leads 2B. When pencils with different leads are in use, the coloured cap shows which one is loaded. Coloured leads for Pica Dry Besides graphite, Pica Dry also takes coloured refill leads - for example the 4040 set of water-jet-resistant special leads in blue, white and green, or the single-colour 4041 (blue), 4042 (green) and 4043 (white). The coloured caps do not replace the leads - they only mark the pencil. Technical specifications ManufacturerPica-Marker Article55801 TypeColoured caps for automatic pencil CompatibilityPica Dry (3030) Number of caps5 ColoursWhite, yellow, red, blue, dark green PackClear bag with hanging tab EAN4260056159510 Supply to dealersClip strip with 10 bags and metal hook Questions and Answers Which pencil are the caps for? Pica presents them as an accessory for the Pica Dry automatic pencil, article 3030. How many caps are in the set? The bag holds 5 caps - one each in white, yellow, red, blue and dark green. The price is for one bag. What are the coloured caps for? They let several Pica Dry pencils be told apart by colour, for example by the type of lead loaded. That way the right pencil is found quickly. Which leads are there for Pica Dry? Pica offers water-soluble Multi-Use 2B leads, water-jet-resistant special leads, carpenter leads H and summer leads 2B. The leads are 2.8 mm in diameter. Do they fit Pica Fine Dry or BIG Dry? The manufacturer lists the caps as an accessory for Pica Dry. For Pica Fine Dry, Pica's accessories include a spare eraser rather than coloured caps. How are the caps packed? The caps come in a clear bag with a hanging tab. Pica supplies them to dealers on a clip strip with 10 bags. Are there coloured leads for Pica Dry? Yes, for example the 4040 set of water-jet-resistant special leads in blue, white and green, and the single-colour 4041, 4042 and 4043. The coloured caps do not replace the leads, they only mark the pencil. ..

Bosch Professional 1600A039RC Combination Pliers, 180 mm The Bosch 1600A039RC are 180 mm combination pliers from Bosch's professional hand-tool range. The manufacturer describes them as an indispensable tool for gripping, twisting, pulling and cutting across diverse applications, designed to deliver high power transfer from hand to tool with minimal hand strain. Chrome-vanadium steel The pliers are made from chrome-vanadium steel, which according to Bosch gives strength and resistance to wear. The jaws have phosphated and polished lips and the tool hardness is 60 +/-2 HRC. The joint is centric. Laser-hardened cutting edges The cutting edges are made from laser-hardened steel for sharpness and precision. Bosch states a cutting force 20% above the standard ISO 5746, which the tool complies with. The hardened gripping teeth provide a secure grip on the workpiece. Multi-component handles The handles are multi-component, slim in profile and fitted with soft-grip areas. According to the manufacturer they help you work effectively - with better control over the tool and less strain on your hand during prolonged work. Applications Combination pliers are a universal tool for electricians, fitters, mechanics and building maintenance: gripping and twisting wire and sheet metal, pulling nails and staples, and cutting wire with the cutting edges next to the joint. The 180 mm (7 inch) size is the classic all-round size for everyday work. Where this article sits in the Bosch range Bosch offers the multi-component handle pliers as a range with a shared handle design and a shared power-transfer concept. Besides the 1600A039RC combination pliers it also includes 160 mm diagonal side cutters (1600A039RD), 180 mm long-nose pliers (1600A039RE) and water pump pliers in 180 mm and 250 mm (1600A039RA and 1600A039R9). The articles differ in pliers type and application, and the part number is the only reliable way to tell them apart. Packaging According to the manufacturer the article is supplied in cardboard hanger packaging with a Euro hole, and the pack quantity is one piece. The European article code (EAN) for this part number is 4059952736969 - the safest way to confirm that this is the 180 mm version of the range. Technical specifications ManufacturerBosch Professional Part number1600A039RC EAN4059952736969 Pliers typeCombination pliers Length180 mm (7 inch) Width55 mm Height23 mm MaterialChrome vanadium SurfacePhosphated + polished jaw lips Cutting edgesLaser hardened JointCentric Hardness60 +/-2 HRC Cutting force vs. standard+20% StandardISO 5746 HandleMulti-component Weight0.239 kg Packaging type per BoschCardboard packaging, hanger, with Euro hole Pack quantity per Bosch1 pc Questions and Answers How long are these pliers? The Bosch 1600A039RC pliers are 180 mm long, which Bosch also states as 7 inches. They are 55 mm wide and 23 mm high. What material are they made from? The manufacturer states chrome-vanadium steel for strength and resistance to wear. The jaw lips are phosphated and polished and the tool hardness is 60 +/-2 HRC. Can they cut wire? Yes - the pliers have cutting edges made from laser-hardened steel next to the joint. Bosch states a cutting force 20% above the ISO 5746 standard. Which standard do they comply with? Bosch states the ISO 5746 standard, which defines the requirements for combination pliers. According to the manufacturer the tool exceeds the cutting force requirement by 20%. What are the handles like? The handles are multi-component, slim in profile and fitted with soft-grip areas. According to Bosch they give better control over the tool and reduce strain on the hand. How much do the pliers weigh? According to Bosch the weight is 0.239 kg. That is typical for combination pliers of this size and allows prolonged work without fatigue. What kind of joint do the pliers have? The joint is centric - the two arms cross in a single plane. Bosch also describes hardened gripping teeth that provide a secure grip on the workpiece. ..

DeWALT DWHT0-70277 PliersDescription: The DeWALT DWHT0-70277 combination pliers feature an innovative design with a large lever-long handles for maximum cutting power. With flat, long, pointed jaws, suitable for gripping and cutting. Made of induction-hardened steel for superior durability and excellent rust protection. The ergonomic and durable handles, made of two materials, add comfort and last longer. They feature a locking mechanism for easy storage. Technical Specifications:Brand: DeWALTModel: DWHT0-70277Material: Induction-hardened steel Application: for gripping and cuttingLength: 225 mm..

Knipex 03 02 200 Phosphated Combination PliersDescription: Knipex 03 02 200 combination pliers are reliable and versatile, ideal for a variety of tasks. With a length of 200 mm, these pliers are comfortable to use in any situation. They are made of special tool steel, forged and oil-hardened, which ensures their strength and durability. The pliers' cutting edges are additionally induction-hardened, providing a hardness of approximately 60 HRC. This ensures a long service life and effective cutting of both soft and hard wires. With their gripping areas for flat and round material, they offer ease of use for various types of work. They feature long cutting edges that are ideal for cutting cables. Technical specifications:Length: 200 mmMaterial: hardened tool steelInsulation type: multi-component coatingVDE tested at 1000V: noJaw shape: flat straightRockwell hardness: 60 HRCCutting capacity for soft wire: 3.8 mmCutting capacity for medium-hard wire: 2.5 mmCutting capacity for copper stranded cable: 13 mmJaw finish: polishedManufacturing method: forged, hardenedStandard: DIN ISO 5746Weight: 0.322 kg..

Knipex 08 21 185 Pointed Combination PliersDescription:Knipex 08 21 185 combination pliers are reliable tools designed for a variety of installation and repair tasks. They are specially designed with high strength and pointed jaws, making them ideal for working in various conditions. Their ergonomic design makes them particularly suitable for working in hard-to-reach places. The head is slim, with tapered jaws that are highly resistant to twisting. This ensures that you can reach and work in tight spaces without any problems. The milled groove in the gripping area is extremely useful for securely holding and pulling out small parts such as nails, pins, cotter pins, and bolts, thereby ensuring greater precision and control during work. The combination pliers also feature cutting edges for soft, medium-hard, and hard wire, making them a versatile tool for various types of materials and tasks. Additionally, the induction-hardened cutting edges ensure durability and stability, while the ergonomic handles with plastic grips offer comfort and ease of use during extended periods of work. Technical specifications:Length: 185 mmMaterial: hardened tool steelInsulation type: plastic coatingJaw shape: pointedRockwell hardness: 64 HRCHard wire cutting capacity: 3 mmCutting capacity for medium-hard wire: 3.8 mmCutting capacity for copper stranded cable: 13 mmJaw finish: polishedManufacturing method: forged, hardenedWeight: 0.213 kg..

Knipex 09 12 240 Phosphated Combination PliersDescription: Knipex 09 12 240 combination pliers are designed for a wide range of tasks, especially heavy-duty applications. They offer improved performance, reducing effort by up to 50% compared to traditional combination pliers. With their solid construction and vanadium electric steel, forged and oil-hardened, these pliers are exceptionally strong and durable. They provide excellent gripping and pulling thanks to the effective cross-serrated gripping surface in the pliers' jaw opening. The additional gripping area below the hinge allows for powerful twisting and pressing, while the induction-hardened cutting edges up to 64 HRC ensure durability and strength when cutting soft and hard wires. These pliers are equipped with a cable pull-through in the hinge gap and a universal pin crimping tool under the hinge, making them multifunctional and convenient to use. Technical specifications:Length: 240 mmType: phosphatedCutting capacity for medium-hard wire: 4.6 mm ØCutting capacity for hard wire: 3 mm ØHandles: insulated with multi-component handles, VDE-testedWeight: 0.470 kg..

Manufacturer: Milwaukee Model: 4932464572 Milwaukee accessory part number 4932464572 Description: Tested up to 10,000 volts and guaranteed up to 1,000 volts. Cold-tested down to -40 °C. Total length 160 mm. VDE (DIN EN/IEC 60900) certified tools. The steel blades are fully forged, hardened, and tempered for maximum durability. The gray titanium coating is non-reflective and ensures maximum corrosion resistance. Induction-hardened cutting edges to cut through even the hardest materials. Precision-machined joint for maximum power transmission with optimal levers for easy and effortless operation. Ergonomic soft-grip handle for comfortable operation and a secure grip. Cutting capacity (in Al and Cu cables): 12 mm Cutting capacity (in hard wire 1800 N/mm2): 2.2 mm Cutting capacity (in soft wire 220 N/mm2): 5.2 mm Overall length: 180 mm Weight: 250 g..

STANLEY 0-84-002 Combination PliersDescription:STANLEY 0-84-002 combination pliers are approved for use with live circuits up to 1000 volts . Their temperature resistance from -20° to +70° C makes them suitable for use in various conditions and environments, including extremely demanding or adverse weather conditions. Technical Specifications:Length: 200 mmVoltage: up to 1000 VTemperature resistance: -20° to +70° CWeight: 0.159 kg..

DEWALT DCS572NT Cordless Handheld Circular SawDescription: The DEWALT DCS572NT cordless brushless circular saw is an extremely efficient circular saw designed for professional and trade applications. This model features a fully brushless motor, which not only delivers increased power but also ensures the tool's reliability and durability. It is suitable for cutting, cross-cutting, and beveling in various building materials, including wood. The maximum cutting depth and bevel angle are adjustable, making it suitable for a wide range of applications. For greater user comfort and safety, the design provides stability and precision during operation, especially when making precise cuts. The auxiliary handle allows for safe two-handed operation, increasing control and reducing vibrations. Ships without batteries or a charger! Technical specifications:Voltage: 18 VNumber of teeth on the blade: 24Outer diameter of the blade: 184 mmInner diameter of the disc: 16 mmNo-load speed: 5500 rpmCutting capacity at 90°/45°: 58/44 mmCutting capacity with guide rail at 90°/45°: 54/40 mmCutting angle: 57°Weight: 3.600 kgIncluded: 1 x Carrying case https://youtu.be/xo69op-RoYo?si=w9_pguAEHnYOYzCn..

DeWALT DCF500N Cordless RatchetDescription: The DeWALT DCF500N cordless ratchet, with 12 V voltage and 75 Nm torque, delivers high performance and precise control. Electronically adjustable speed and torque allow for flexibility during operation, while the compact design and ergonomic rubber grips ensure a comfortable and secure grip. The brushless motor ensures a longer service life and higher performance, while the powerful LEDs improve visibility in dark work areas. The ratchet comes with three interchangeable sockets. It is shipped without a battery or charger! Technical specifications:Voltage: 12 VMax. torque: 75 NmDrive size: 1/4", 1/4" HEX, and 3/8"No-load speed: 450 rpmLength: 330 mmWeight: 0.900 kghttps://youtu.be/VeztI2NS61c?si=hfOw5tJ5aFhNZCtF..

DeWALT DCF503EN Cordless RatchetDescription: The DeWALT DCF503EN cordless ratchet is a powerful and convenient tool designed for both professional and home use. This ratchet is equipped with a slim brushless motor that runs on a 12V battery, delivering an impressive torque of 81 Nm , and features a 3/8" drive. The ratchet has a reverse function that provides full control during operation. The E version is equipped with a 100 mm extended head for even more comfortable work in tight spaces. The trigger lock function allows for easy handling of the tool. Equipped with an LED light, which allows the user to work with precision and confidence even in dark or hard-to-reach places. Ships without a battery or charger! Technical specifications:Voltage: 12 VBattery type: Li-ionMechanical speeds: 1 No-load speed: 0 - 250 rpm Chuck size: 3/8" (square) Maximum torque: 81 NmLighting: LEDDimensions (L x W x H): 330 x - x - mmWeight: 1.2 kghttps://youtu.be/0uLdWLDX7_g?si=Uhpmo0_FZIjyFmxy..