Hand tools - Page 5

Stanley RB5 Block Plane, 152 mm, 51 mm Blade, 0-12-105 Stanley RB5 0-12-105 is a small block plane, 152 mm long with a 51 mm blade set at 45 degrees. The blade is replaceable, and the handle carries storage for spare blades. What a block plane is for A block plane is held in one hand and made for finishing, not for taking off thick material. The usual jobs are chamfering an edge, cleaning up a cut edge, easing a door or drawer that binds, and smoothing end grain. A full-size plane is awkward for those, because it wants two hands and will not reach into tight places. Two blade positions The blade mounts in two different positions. In the usual one it sits back and the tool works as a normal block plane. In the second the blade moves forward to the very nose - so the plane cuts right into an internal corner, which an ordinary plane cannot. That is the reason to choose this model: fitting a threshold or a jamb up to a corner is done with one tool. Replaceable blades The blade is not sharpened - it is replaced. The practical advantage is that the plane always cuts like new, with no stones and no sharpening skill. Changing is quick, and spare blades live in the handle, so they travel with the tool. Depth adjustment Cutting depth is set with a knurled screw on top. It adjusts by hand with no spanner, and is checked with a test pass on offcut - a fine shaving means a clean surface, a thick one leaves marks. The body The body is cast with a flat sole. The small size lets the plane travel in a bag or a belt pouch - for a joinery and door fitter it is an everyday tool rather than one that lives in the workshop. Technical specifications ManufacturerStanley Article number0-12-105 ModelRB5 TypeBlock plane Overall length152 mm (6 inches) Blade width51 mm (2 inches) Blade angle45° BladeReplaceable, high carbon steel Blade positions2 - regular and bullnose Depth adjustmentKnurled screw Blade storageIn the handle Questions and Answers What size is the plane? 152 mm (6 inches) long, with a 51 mm (2 inch) blade at 45 degrees. Is the blade sharpened? No - it is replaced. The plane always cuts like new, with no stones and no sharpening skill. Spares live in the handle. What do the two blade positions mean? In the usual one the tool works as a normal block plane. In the second the blade moves to the very nose and the plane cuts right into an internal corner. What work is it for? Finishing - chamfering, cleaning up a cut edge, easing a binding door or drawer, smoothing end grain. How is the depth adjusted? With a knurled screw on top, by hand and with no spanner. Check it with a test pass on offcut. One hand or two? One hand - that is the block plane's main advantage over a full-size plane. Can it take off thick material? It is not made for that. Heavy stock removal calls for a full-size plane; the block plane is for finishing and fitting. ..

Bosch 1600A027M3 Hand ToolsDescription: The Bosch 1600A027M3 hand tool set includes 4 high-quality tools essential for every craftsman. The aluminum level offers a long service life thanks to its aluminum housing, UV-resistant liquid in the vial, and shock-resistant end caps. The level is 250 mm long and features easy-to-read vials with a dual-sided view for user convenience. It has one horizontal and two vertical vials. Technical specifications:Number of vertical vials: 2Number of horizontal vials: 1Measurement accuracy: 0.5 mm/1 mLength: 250 mmHeight: 25 mmWidth: 51 mmMaterial: aluminumThe shock-resistant tape measure features a sturdy and ergonomic body that is impact-resistant. The tape length is 5 m, and it has a strong magnet for easy one-handed operation. The belt clip provides convenience for easy storage, so it's always within reach. With accuracy class II, this tool offers convenience and quality for long-term use. Technical specifications:Length: 8 mTape width: 27 mmType: Magnetic, shock-resistantAccuracy class: IIPrinting: Double-sidedStopper: YesLength: 90 mmWidth: 50 mmHeight: 86 mmWeight: 0.52 kgCraft knife and replacement blades with a sturdy and ergonomic design featuring a soft-grip coating that ensures maximum comfort during use and protects the tool from impacts. The tool's angled design allows for easy and intuitive use, while the strap hole enables convenient storage while working. With an 18 mm blade that can be easily replaced, this tool offers clean cuts in various materials. You can store up to 3 replacement blades in the knife handle. The set includes 10 replacement blades in a plastic case. Technical specifications:Length: 185 mmHeight: 60 mmWidth: 24 mmBlade width: 18 mmType: CraftMaterial: Plastic and metalSpare blades: 10 pcs..

Bosch 1600A027M4 Craft KnivesDescription: The Bosch 1600A027M4 craft knife set is an indispensable tool for any professional or hobbyist looking for the perfect combination of quality and convenience. The knife handles are made entirely of durable plastic, ensuring a secure grip and comfort during use. The blades are made of extremely durable aluminum, ensuring longevity and precision when cutting. They are suitable for various applications such as cutting fabric, paper, leather, or other materials, delivering flawless results. The 1600A01V3H offers smooth and fast cable cutting, as well as convenient storage of spare blades in the handle. The 1600A016BL is foldable and allows for easy blade replacement, with blades stored in the handle. The models included in the set are 1600A01V3H, 1600A016B, and 1600A01TH6, which offer versatility and the ability to handle any task. Technical specifications:Type: CraftHandle material: PlasticBlade material: AluminumSuitable for: fabric, paper, leather, or other materialsSet includes:1 x Professional knife 1600A01V3H (L x W x H): 7.3 x 2.3 x 0.9 (185.4 x 59.8 x 24.0 mm); Weight: (190 g).1 x Professional Knife 1600A016BL (L x W x H): 7.2 x 0.9 x 1.4 (183 x 22 x 35 mm); Weight: (190 g).1 x Professional knife 1600A01TH6 (L x W x H): 6.9 x 0.8 x 1.5 (175 x 21 x 38 mm); Weight: (120 g)...

Bosch 1600A01V3Z Slim LevelDescription: The Bosch 1600A01V3Z aluminum level offers a long service life thanks to its aluminum housing, UV-resistant liquid in the vial, and shock-resistant end caps. The level is 1250 mm long and features easy-to-read vials with a dual-sided view for user convenience. It has one horizontal and two vertical vials. Technical specifications:Number of vertical vials: 2Number of horizontal vials: 1Measurement accuracy: 0.5 mm/1 mLength: 1250 mmHeight: 25 mmWidth: 51 mmMaterial: aluminumWeight: 0.97 kg..

Bosch 2608521U83 Bit and Drill Bit SetDescription: The Bosch 2608521U83 bit and drill bit set is the ideal solution for professionals in the interior design and installation industries who seek reliability and high performance in their tools. The bits are designed with a torsion zone that effectively absorbs torque loads, ensuring durability and preventing breakage. Each bit features color-coded rings that clearly indicate the head type, and laser markings help you select exactly the right bit for the job. The EXPERT HEX-9 Multi Construction drill bits feature wear-resistant cutting edges and carbide tips, providing them with extra hardness and high performance. The chip flutes in the drill bits effectively remove debris and extend the tool's life. All parts are arranged in a sturdy case with separate holders, allowing you to easily organize your tools. Technical specifications:Number of pieces: 20Profile: PH, PZ, T, drill bitsLength: 25, 55 mmSocket: 1/4" (hex)Application: for screwdrivers and power drillsFeature: with magnetic holderSet includes:25 mm bits: PH2 (2x); PH3; PZ1; PZ2 (2x); T15; T20 (2x); T25 (2x); T3055 mm bits: PH2; T20; T25EXPERT HEX-9 Multi Construction drill bits: 5; 6; 8 mm60 mm Bit holder..

Bosch 2608521U85 Bit and Drill Bit SetDescription: The Bosch 2608521U85 bit and drill bit set is the ideal solution for professionals in the interior design and installation industries who seek reliability and high performance in their tools. The bits are designed with a torsion zone that effectively absorbs torque loads, ensuring durability and preventing breakage. Each bit features color-coded rings that clearly indicate the head type, and laser markings help you select exactly the right bit for the job. The EXPERT HEX-9 Multi Construction drill bits feature wear-resistant cutting edges and carbide tips, providing them with extra hardness and high performance. The chip flutes in the drill bit effectively remove debris and extend the tool's life. All parts are arranged in a sturdy case with separate holders, allowing you to easily organize your tools. Technical specifications:Number of pieces: 40Profile: PH, PZ, T, H, SL, drill bitsLength: 25, 55 mmSocket: 1/4" (hex)Application: for screwdrivers and power drillsFeature: with magnetic holderSet includes:25 mm bits: PH1; PH2 (3x); PH3; PZ1; PZ2 (2x); PZ3; T10; T15 (2x); T20 (3x); T25 (3x); T27; T30 (3x); T40; H4; H5; SL4.5; SL5.5; SL6.5.55 mm bits: PH2; T20; T253 x Socket wrenches: 8; 10; 13 mmEXPERT HEX-9 Multi Construction drill bits: 5; 6; 8 (2x) mm2 x 60 mm bit holder..

Bosch 2608521U74 Bit SetDescription: The Bosch 2608521U74 bit set is the perfect choice for installers who need durable and reliable bits for everyday work. Made of heat-treated modified steel, they offer exceptional resistance to high loads and torque. The torsion zone effectively absorbs stress, preventing breakage and extending the life of the bits. Color-coded rings make it easy to identify the head type, and laser markings ensure easy selection of the correct size. The set comes in a sturdy case with precisely organized holders that allow for convenient storage and the ability to customize your toolbox. Technical specifications:Number of pieces: 20Profile: PH, PZ, T, SLLength: 25, 55, 90 mmSocket: 1/4" (hex)Application: for screwdrivers and power toolsFeature: with magnetic holderSet includes:25 mm bits: PH1, PH2 (2x); PZ2; PZ3; T10; T15; T20; T25; T30; T40; SL5.555 mm bits: PZ2, T20; T2590 mm bits: PH2, T20; T25; T3060 mm bit holder..

Bosch 2608521U75 Bit SetDescription: The Bosch 2608521U75 bit set is the perfect choice for installers who need durable and reliable bits for everyday work. Made of heat-treated modified steel, they offer exceptional resistance to high loads and torque. The torsion zone effectively absorbs stress, preventing breakage and extending the life of the bits. Color-coded rings make it easy to identify the head type, and laser markings ensure easy selection of the correct size. The set comes in a sturdy case with precisely organized holders that allow for convenient storage and the ability to customize your toolbox. Technical specifications:Number of pieces: 24Profile: PH, PZ, T, SL, RLength: 25, 55 mmSocket: 1/4" (hex)Application: for screwdrivers and power drillsFeature: with magnetic holderSet includes:25 mm bits: PH1; PH2 (2x); PH3; PZ2; PZ3; T15; T20; T25; T30; T40; SL5.5; R1; R2; R3; P2R2.55 mm bits: PH2; T20 (2x); T25 (25x); T30; R260 mm Bit holder..

Bosch Box Level 1600A03AA3, 12 cm The Bosch 1600A03AA3 is an aluminium box level with an overall length of 120 mm. The body measures 50 mm high and 25 mm wide, and the accuracy stated by the manufacturer is 0.5 mm/m. It belongs to the Bosch Professional hand tool range, in which the same profile is offered in five lengths - 12, 40, 60, 100 and 180 cm. This size weighs 0.092 kg. Rigid aluminium frame The frame is drawn from aluminium and dimensioned to keep its shape through daily site work. The rectangular section gives a wide bearing surface, so the level sits steadily and does not rock while you read it. Both ends are closed with impact-resistant caps that absorb the shock of a drop and protect the ends of the profile from damage and corrosion. Vials that read quickly The liquid in the vials is UV-resistant, so the bubble keeps its contrast after long spells of outdoor work. The vial is read from the front and the profile is built for dual-site viewing - the reading stays available when the level is pressed against a wall, a beam or a frame and only one side is accessible. When this particular size is the right one The 12 cm profile weighs 92 g and fits in a trouser pocket. It is the one to reach for when fitting switches and sockets, aligning single tiles or making any quick check where a long level is simply in the way. Applications The level is intended for checking horizontal and vertical alignment in finishing, installation and masonry work: setting door frames, fitting cabinets, brackets, radiators and sanitary ware, aligning tiles and courses of brickwork, and making a quick check on work already done. The tool is purely mechanical - no batteries, no calibration, nothing to switch on. Technical specifications Part number1600A03AA3 EAN4059952736518 Typebox level Length120 mm (12 cm) Height50 mm Width25 mm Weight0.092 kg Housing materialaluminium Accuracy level0.5 mm/m UV-resistant vial liquidyes Front view vialyes Dual-site viewyes Impact-resistant end capsyes Packaging typepaper / cardboard / corrugated board, packaging with Euro hole Pack quantity1 pc ManufacturerBosch Professional Questions and Answers What is the accuracy of the Bosch 1600A03AA3 level? The manufacturer states an accuracy level of 0.5 mm/m. Over one metre the permitted deviation of the reading is half a millimetre. The figure applies with the level in working position on a flat bearing surface. What is the exact length of this level? The overall length of the profile is 120 mm, that is 12 cm. The profile is 50 mm high and 25 mm wide. These dimensions are Bosch's own figures for part number 1600A03AA3. What is the body made of? The body is an aluminium profile with a rectangular section. Aluminium holds its shape and does not rust, and the rectangular section gives a wide bearing surface on which the level does not rock while being read. What does dual-site viewing mean? The profile is built so that the bubble can be seen both from the front and through the far side of the level. That matters when the level is pressed against a wall, a frame or a beam and only one side is accessible. Why is the vial liquid UV-resistant? Ultraviolet light yellows ordinary liquids over time and the bubble becomes harder to read. A UV-resistant liquid keeps its contrast, which matters for outdoor work and for a tool that lives in a van or on scaffolding. Does it need batteries or calibration? No. This is a mechanical spirit level - no electronics, no batteries, nothing to set. Accuracy is easy to check on site: take a reading, turn the level through 180 degrees on the same surface, and the bubble should settle in the same place. What other lengths does the range offer? The range comes in five lengths: 12 cm (1600A03AA3), 40 cm (1600A03AA4), 60 cm (1600A03AA5), 100 cm (1600A03AA6) and 180 cm (1600A03AA7). The profile, the material and the accuracy are the same across all sizes. ..

Bosch Box Level 1600A03AA4, 40 cm The Bosch 1600A03AA4 is an aluminium box level with an overall length of 400 mm. The body measures 50 mm high and 25 mm wide, and the accuracy stated by the manufacturer is 0.5 mm/m. It belongs to the Bosch Professional hand tool range, in which the same profile is offered in five lengths - 12, 40, 60, 100 and 180 cm. This size weighs 0.265 kg. Rigid aluminium frame The frame is drawn from aluminium and dimensioned to keep its shape through daily site work. The rectangular section gives a wide bearing surface, so the level sits steadily and does not rock while you read it. Both ends are closed with impact-resistant caps that absorb the shock of a drop and protect the ends of the profile from damage and corrosion. Vials that read quickly The liquid in the vials is UV-resistant, so the bubble keeps its contrast after long spells of outdoor work. The vial is read from the front and the profile is built for dual-site viewing - the reading stays available when the level is pressed against a wall, a beam or a frame and only one side is accessible. When this particular size is the right one The 40 cm length is the cabinet, window-frame and radiator size - long enough to pick up a slope across a whole panel, short enough to work between two adjacent elements. Applications The level is intended for checking horizontal and vertical alignment in finishing, installation and masonry work: setting door frames, fitting cabinets, brackets, radiators and sanitary ware, aligning tiles and courses of brickwork, and making a quick check on work already done. The tool is purely mechanical - no batteries, no calibration, nothing to switch on. Technical specifications Part number1600A03AA4 EAN4059952736525 Typebox level Length400 mm (40 cm) Height50 mm Width25 mm Weight0.265 kg Housing materialaluminium Accuracy level0.5 mm/m UV-resistant vial liquidyes Front view vialyes Dual-site viewyes Impact-resistant end capsyes Packaging typepaper / cardboard / corrugated board, packaging with Euro hole Pack quantity1 pc ManufacturerBosch Professional Questions and Answers What is the accuracy of the Bosch 1600A03AA4 level? The manufacturer states an accuracy level of 0.5 mm/m. Over one metre the permitted deviation of the reading is half a millimetre. The figure applies with the level in working position on a flat bearing surface. What is the exact length of this level? The overall length of the profile is 400 mm, that is 40 cm. The profile is 50 mm high and 25 mm wide. These dimensions are Bosch's own figures for part number 1600A03AA4. What is the body made of? The body is an aluminium profile with a rectangular section. Aluminium holds its shape and does not rust, and the rectangular section gives a wide bearing surface on which the level does not rock while being read. What does dual-site viewing mean? The profile is built so that the bubble can be seen both from the front and through the far side of the level. That matters when the level is pressed against a wall, a frame or a beam and only one side is accessible. Why is the vial liquid UV-resistant? Ultraviolet light yellows ordinary liquids over time and the bubble becomes harder to read. A UV-resistant liquid keeps its contrast, which matters for outdoor work and for a tool that lives in a van or on scaffolding. Does it need batteries or calibration? No. This is a mechanical spirit level - no electronics, no batteries, nothing to set. Accuracy is easy to check on site: take a reading, turn the level through 180 degrees on the same surface, and the bubble should settle in the same place. What other lengths does the range offer? The range comes in five lengths: 12 cm (1600A03AA3), 40 cm (1600A03AA4), 60 cm (1600A03AA5), 100 cm (1600A03AA6) and 180 cm (1600A03AA7). The profile, the material and the accuracy are the same across all sizes. ..

Bosch Box Level 1600A03AA5, 60 cm The Bosch 1600A03AA5 is an aluminium box level with an overall length of 600 mm. The body measures 50 mm high and 25 mm wide, and the accuracy stated by the manufacturer is 0.5 mm/m. It belongs to the Bosch Professional hand tool range, in which the same profile is offered in five lengths - 12, 40, 60, 100 and 180 cm. This size weighs 0.393 kg. Rigid aluminium frame The frame is drawn from aluminium and dimensioned to keep its shape through daily site work. The rectangular section gives a wide bearing surface, so the level sits steadily and does not rock while you read it. Both ends are closed with impact-resistant caps that absorb the shock of a drop and protect the ends of the profile from damage and corrosion. Vials that read quickly The liquid in the vials is UV-resistant, so the bubble keeps its contrast after long spells of outdoor work. The vial is read from the front and the profile is built for dual-site viewing - the reading stays available when the level is pressed against a wall, a beam or a frame and only one side is accessible. When this particular size is the right one Sixty centimetres is the most versatile length in the range: it spans the width of most doors and kitchen units, and at 393 g it can be held in one hand while the other steadies the workpiece. Applications The level is intended for checking horizontal and vertical alignment in finishing, installation and masonry work: setting door frames, fitting cabinets, brackets, radiators and sanitary ware, aligning tiles and courses of brickwork, and making a quick check on work already done. The tool is purely mechanical - no batteries, no calibration, nothing to switch on. Technical specifications Part number1600A03AA5 EAN4059952736532 Typebox level Length600 mm (60 cm) Height50 mm Width25 mm Weight0.393 kg Housing materialaluminium Accuracy level0.5 mm/m UV-resistant vial liquidyes Front view vialyes Dual-site viewyes Impact-resistant end capsyes Packaging typepaper / cardboard / corrugated board, packaging with Euro hole Pack quantity1 pc ManufacturerBosch Professional Questions and Answers What is the accuracy of the Bosch 1600A03AA5 level? The manufacturer states an accuracy level of 0.5 mm/m. Over one metre the permitted deviation of the reading is half a millimetre. The figure applies with the level in working position on a flat bearing surface. What is the exact length of this level? The overall length of the profile is 600 mm, that is 60 cm. The profile is 50 mm high and 25 mm wide. These dimensions are Bosch's own figures for part number 1600A03AA5. What is the body made of? The body is an aluminium profile with a rectangular section. Aluminium holds its shape and does not rust, and the rectangular section gives a wide bearing surface on which the level does not rock while being read. What does dual-site viewing mean? The profile is built so that the bubble can be seen both from the front and through the far side of the level. That matters when the level is pressed against a wall, a frame or a beam and only one side is accessible. Why is the vial liquid UV-resistant? Ultraviolet light yellows ordinary liquids over time and the bubble becomes harder to read. A UV-resistant liquid keeps its contrast, which matters for outdoor work and for a tool that lives in a van or on scaffolding. Does it need batteries or calibration? No. This is a mechanical spirit level - no electronics, no batteries, nothing to set. Accuracy is easy to check on site: take a reading, turn the level through 180 degrees on the same surface, and the bubble should settle in the same place. What other lengths does the range offer? The range comes in five lengths: 12 cm (1600A03AA3), 40 cm (1600A03AA4), 60 cm (1600A03AA5), 100 cm (1600A03AA6) and 180 cm (1600A03AA7). The profile, the material and the accuracy are the same across all sizes. ..

Bosch Box Level 1600A03AA6, 100 cm The Bosch 1600A03AA6 is an aluminium box level with an overall length of 1000 mm. The body measures 50 mm high and 25 mm wide, and the accuracy stated by the manufacturer is 0.5 mm/m. It belongs to the Bosch Professional hand tool range, in which the same profile is offered in five lengths - 12, 40, 60, 100 and 180 cm. This size weighs 0.660 kg. Rigid aluminium frame The frame is drawn from aluminium and dimensioned to keep its shape through daily site work. The rectangular section gives a wide bearing surface, so the level sits steadily and does not rock while you read it. Both ends are closed with impact-resistant caps that absorb the shock of a drop and protect the ends of the profile from damage and corrosion. Vials that read quickly The liquid in the vials is UV-resistant, so the bubble keeps its contrast after long spells of outdoor work. The vial is read from the front and the profile is built for dual-site viewing - the reading stays available when the level is pressed against a wall, a beam or a frame and only one side is accessible. When this particular size is the right one The one-metre profile is the classic length for masonry, door frames and verticals. At 660 g it sits steadily on a course of bricks and gives a long enough bearing surface to reveal a deviation that a shorter level would miss. Applications The level is intended for checking horizontal and vertical alignment in finishing, installation and masonry work: setting door frames, fitting cabinets, brackets, radiators and sanitary ware, aligning tiles and courses of brickwork, and making a quick check on work already done. The tool is purely mechanical - no batteries, no calibration, nothing to switch on. Technical specifications Part number1600A03AA6 EAN4059952736549 Typebox level Length1000 mm (100 cm) Height50 mm Width25 mm Weight0.660 kg Housing materialaluminium Accuracy level0.5 mm/m UV-resistant vial liquidyes Front view vialyes Dual-site viewyes Impact-resistant end capsyes Packaging typepaper / cardboard / corrugated board, packaging with Euro hole Pack quantity1 pc ManufacturerBosch Professional Questions and Answers What is the accuracy of the Bosch 1600A03AA6 level? The manufacturer states an accuracy level of 0.5 mm/m. Over one metre the permitted deviation of the reading is half a millimetre. The figure applies with the level in working position on a flat bearing surface. What is the exact length of this level? The overall length of the profile is 1000 mm, that is 100 cm. The profile is 50 mm high and 25 mm wide. These dimensions are Bosch's own figures for part number 1600A03AA6. What is the body made of? The body is an aluminium profile with a rectangular section. Aluminium holds its shape and does not rust, and the rectangular section gives a wide bearing surface on which the level does not rock while being read. What does dual-site viewing mean? The profile is built so that the bubble can be seen both from the front and through the far side of the level. That matters when the level is pressed against a wall, a frame or a beam and only one side is accessible. Why is the vial liquid UV-resistant? Ultraviolet light yellows ordinary liquids over time and the bubble becomes harder to read. A UV-resistant liquid keeps its contrast, which matters for outdoor work and for a tool that lives in a van or on scaffolding. Does it need batteries or calibration? No. This is a mechanical spirit level - no electronics, no batteries, nothing to set. Accuracy is easy to check on site: take a reading, turn the level through 180 degrees on the same surface, and the bubble should settle in the same place. What other lengths does the range offer? The range comes in five lengths: 12 cm (1600A03AA3), 40 cm (1600A03AA4), 60 cm (1600A03AA5), 100 cm (1600A03AA6) and 180 cm (1600A03AA7). The profile, the material and the accuracy are the same across all sizes. ..

Bosch Box Level 1600A03AA7, 180 cm The Bosch 1600A03AA7 is an aluminium box level with an overall length of 1800 mm. The body measures 50 mm high and 25 mm wide, and the accuracy stated by the manufacturer is 0.5 mm/m. It belongs to the Bosch Professional hand tool range, in which the same profile is offered in five lengths - 12, 40, 60, 100 and 180 cm. This size weighs 1.150 kg. Rigid aluminium frame The frame is drawn from aluminium and dimensioned to keep its shape through daily site work. The rectangular section gives a wide bearing surface, so the level sits steadily and does not rock while you read it. Both ends are closed with impact-resistant caps that absorb the shock of a drop and protect the ends of the profile from damage and corrosion. Vials that read quickly The liquid in the vials is UV-resistant, so the bubble keeps its contrast after long spells of outdoor work. The vial is read from the front and the profile is built for dual-site viewing - the reading stays available when the level is pressed against a wall, a beam or a frame and only one side is accessible. When this particular size is the right one One metre eighty is the length for columns, lintels and tall frames. The long bearing surface averages out surface irregularities and shows the true slope of the element rather than a local hollow under the level. Applications The level is intended for checking horizontal and vertical alignment in finishing, installation and masonry work: setting door frames, fitting cabinets, brackets, radiators and sanitary ware, aligning tiles and courses of brickwork, and making a quick check on work already done. The tool is purely mechanical - no batteries, no calibration, nothing to switch on. Technical specifications Part number1600A03AA7 EAN4059952736556 Typebox level Length1800 mm (180 cm) Height50 mm Width25 mm Weight1.150 kg Housing materialaluminium Accuracy level0.5 mm/m UV-resistant vial liquidyes Front view vialyes Dual-site viewyes Impact-resistant end capsyes Packaging typepaper / cardboard / corrugated board, packaging with Euro hole Pack quantity1 pc ManufacturerBosch Professional Questions and Answers What is the accuracy of the Bosch 1600A03AA7 level? The manufacturer states an accuracy level of 0.5 mm/m. Over one metre the permitted deviation of the reading is half a millimetre. The figure applies with the level in working position on a flat bearing surface. What is the exact length of this level? The overall length of the profile is 1800 mm, that is 180 cm. The profile is 50 mm high and 25 mm wide. These dimensions are Bosch's own figures for part number 1600A03AA7. What is the body made of? The body is an aluminium profile with a rectangular section. Aluminium holds its shape and does not rust, and the rectangular section gives a wide bearing surface on which the level does not rock while being read. What does dual-site viewing mean? The profile is built so that the bubble can be seen both from the front and through the far side of the level. That matters when the level is pressed against a wall, a frame or a beam and only one side is accessible. Why is the vial liquid UV-resistant? Ultraviolet light yellows ordinary liquids over time and the bubble becomes harder to read. A UV-resistant liquid keeps its contrast, which matters for outdoor work and for a tool that lives in a van or on scaffolding. Does it need batteries or calibration? No. This is a mechanical spirit level - no electronics, no batteries, nothing to set. Accuracy is easy to check on site: take a reading, turn the level through 180 degrees on the same surface, and the bubble should settle in the same place. What other lengths does the range offer? The range comes in five lengths: 12 cm (1600A03AA3), 40 cm (1600A03AA4), 60 cm (1600A03AA5), 100 cm (1600A03AA6) and 180 cm (1600A03AA7). The profile, the material and the accuracy are the same across all sizes. ..

Bosch Claw Hammer 1600A03AK6, 20 oz / 567 g The Bosch 1600A03AK6 is a curved claw hammer with a carbon steel head weighing 0.57 kg (the head itself is marked 20 oz / 567 g) and an overall length of 333 mm. The complete tool weighs 0.836 kg and the head hardness is HRC 50-58. The tool is built to the ISO 15601 standard. Fibreglass-cored handle The handle has a fibreglass core - a material with a 65% fibreglass ratio according to the manufacturer. Fibreglass absorbs much of the vibration that a wooden or one-piece steel handle sends back into the wrist, and it does not shrink and loosen the way wood does. Over it sits a multi-component grip that holds in a sweaty or oily hand. At the end there is a tether hole - on scaffolding or a roof the hammer is clipped on and will not fall. The head The striking face is large, and that is safety rather than styling: more area means less chance of catching the edge of the face and sending the nail sideways. The other side carries the V-shaped claw with a curved profile. The curve is the geometry that turns the swing into a lever: once the claw has taken the nail head, rolling the hammer draws the nail out instead of bending it. A hardness of HRC 50-58 is the range in which the face does not dent and the claw does not snap under load. Applications Driving and pulling nails in formwork, scaffolding, timber framing, sheathing and stripping out. Twenty ounces is the most commonly preferred weight for everyday carpentry - enough for a 90 mm nail in a few blows, but not so heavy that the arm tires within the hour. Technical specifications Part number1600A03AK6 EAN4059952737164 Typeclaw hammer, curved claw Head weight0.57 kg (20 oz / 567 g) Total weight0.836 kg Overall length333 mm Height35 mm Width138 mm Head materialcarbon steel HardnessHRC 50-58 Handlemulti-component Fibreglass ratio65% Tether holeyes StandardISO 15601 Packaging typepaper / cardboard / corrugated board, hanger packaging with Euro hole Pack quantity1 pc ManufacturerBosch Professional Questions and Answers How heavy is the hammer? The head weighs 0.57 kg and is marked on the head itself as 20 oz / 567 g. The complete tool with the handle weighs 0.836 kg. Bosch's catalogue name rounds the head weight to 570 g. What is the handle made of? The handle has a fibreglass core - the manufacturer states a 65 per cent ratio - with a multi-component grip over it. Fibreglass absorbs vibration and does not shrink loose the way a wooden handle does. What is the difference between a curved and a straight claw? A curved claw, as here, is the geometry for pulling nails: rolling the hammer acts as a lever and draws the nail out. A straight claw is more for splitting and prising boards apart when stripping out. What is the hole at the end of the handle for? It is a tether hole. On scaffolding, a roof or a platform the hammer is clipped to a lanyard so that it does not fall if dropped - a standard requirement on many sites. How hard is the head? Bosch states HRC 50-58. The range is chosen so that the striking face does not dent while the claw does not snap when drawing a firmly driven nail. Is it suitable for breaking concrete? No. This is a carpenter's nail hammer. For breaking out and for striking a chisel, use a club hammer with a heavier, more massive head built for that load. Which standard is it built to? The manufacturer names ISO 15601 - the standard that sets the shape, weight and requirements for claw hammers. ..