Hand tools - Page 7

Bosch Ratchet 1600A03AC8, 1/2 inch The Bosch 1600A03AC8 is a hand ratchet with a 1/2 inch square drive, 265 mm long and 41 mm across the head. The mechanism has 72 teeth and a 5 degree working angle, and the torque stated by the manufacturer is 768 Nm. The tool belongs to the Bosch Professional hand tool range. Powder-metallurgy ring gear The ring gear of the mechanism is made by powder metallurgy - steel sintered from powder, which gives a more even structure in the small teeth. The gear has 72 teeth, which means a 5 degree working angle: that is all the swing needed for the next tooth to engage. In a tight space, where the hand can only turn a few degrees, that is the difference between a tool that works and a tool that only clicks. Chrome-vanadium steel and ergonomics The body is chrome-vanadium steel - the same material Bosch uses for the screwdrivers and chisels in this range. The neck is curved and the handle is soft-gripped, so the force from the hand is transferred along the axis of rotation instead of being lost in slipping. The manufacturer states power transfer up to 50% above the requirement of the ISO 3315 standard. The direction switch is under the thumb and can be changed without taking the hand off the tool, and the socket lock button keeps the socket on the square when you are working upwards or overhead. What this size is for The 1/2 inch square is the size for heavy fasteners - anchors, structural bolts, running gear. The 265 mm length gives the leverage needed to break a tight bolt loose without reaching for a cheater bar. Applications Fitting and removing threaded fasteners with 1/2 inch sockets, workshop servicing, installation work, structures and machinery, and anywhere the space does not allow a full turn of a wrench. The ratchet takes any standard socket or extension with a 1/2 inch drive, whoever made it. Technical specifications Part number1600A03AC8 EAN4059952737393 Size1/2 in Length265 mm Width41 mm Materialchrome vanadium Ratchet teeth72 Working angle5 degrees Torque768 Nm Torque vs. standard+50% StandardISO 3315 Socket lock buttonyes Packaging typepaper / cardboard / corrugated board, packaging with Euro hole Pack quantity1 pc ManufacturerBosch Professional Questions and Answers What is the torque rating of the 1600A03AC8 ratchet? The manufacturer states 768 Nm for this model. That is the torque the mechanism is designed to withstand, not a recommended tightening torque - that is set by the fastener itself. What does a 5 degree working angle mean? The gear has 72 teeth, so the next tooth engages every 5 degrees of swing. In a tight space, where the hand cannot turn further, the ratchet keeps working where a coarser mechanism would just skip. Do sockets from other brands fit? Yes. The drive is a standard 1/2 inch square and accepts any socket, extension, universal joint or adapter of that size, whoever made it. What is the socket lock button for? The button holds the socket on the square instead of letting it drop when the tool is turned over. That matters when working upwards, overhead or at height, where a dropped socket takes a long time to find. How is the direction changed? With the switch on the head, pressed with the thumb without taking the hand off the handle. One position tightens, the other loosens. What does +50% above the standard mean? Bosch states that the ratchet transfers torque up to 50 per cent above the requirement of ISO 3315, the standard that sets minimum figures for hand ratchets. The figure is the manufacturer's. Is there another size in the range? Yes. The range includes a 1/4 inch ratchet (1600A03AC6, 150 mm) and a 1/2 inch ratchet (1600A03AC8, 265 mm). Both have 72 teeth, a 5 degree working angle and a chrome-vanadium body. ..

Bosch Ratchet Set 1600A03AC7, 1/4 inch, 37 pcs The Bosch 1600A03AC7 is a 37-piece set with a 1/4 inch drive, laid out in a case. It holds a 1/4 inch ratchet, a universal screwdriver with a magnetic hexagon socket, ten sockets, five adapters and eighteen screwdriver bits. The set belongs to the Bosch Professional hand tool range. The ratchet in the set The ratchets in this range use a powder-metallurgy ring gear with 72 teeth, giving a 5 degree working angle - that is all the swing needed for the next tooth to engage, and all there is to be had in a tight space. The body is chrome-vanadium steel, the neck is curved and the handle is soft-gripped. The manufacturer states power transfer up to 50% above the requirement of the ISO 3315 standard. The direction switch changes under the thumb, without taking the hand off the tool. What the sockets and bits cover The sockets run from 5 to 13 mm - the range of small fasteners found in panels, boards, clips and furniture. The bits cover the four commonest profiles: cross-head PH and PZ, slotted SL and Torx, plus ALLEN hex from 3 to 6 mm. Every bit is 25 mm long, so it fits both the universal screwdriver's holder and the adapters to the square drive. The adapters are what make it a set The five adapters are what turns a box of sockets into a working kit: two extensions of 50 and 100 mm for reaching down, a universal joint for working at an angle, and two converters between the 1/4 inch square and a hexagon drive. Those last two let the bits be turned with the ratchet and the sockets be turned with a cordless screwdriver. Applications Electrical installation and distribution boards, interior finishing, assembling and dismantling furniture and equipment, light servicing, machine maintenance, and any job where the fasteners are small and mixed. The case holds every piece in its place, so a missing socket is obvious at a glance. Scope of supply as published by the manufacturer 1/4 inch ratchet Universal screwdriver with magnetic hexagon socket Sockets 1/4 inch: 5; 5.5; 6; 7; 8; 9; 10; 11; 12; 13 mm Adapters: extension 50 mm; extension 100 mm; universal joint; 1/4 inch to HEX; HEX to 1/4 inch Bits 25 mm: PH1, PH2, PH3; PZ1, PZ2, PZ3; SL0.5x4, SL0.6x5, SL1x6; T10, T15, T20, T25, T30; ALLEN 3, 4, 5 and 6 mm Technical specifications Part number1600A03AC7 EAN4059952737386 Size1/4 in Number of pieces37 Sockets5; 5.5; 6; 7; 8; 9; 10; 11; 12; 13 mm Adaptersextensions 50 and 100 mm, universal joint, 1/4 in / HEX converters BitsPH1-PH3, PZ1-PZ3, SL0.5x4, SL0.6x5, SL1x6, T10-T30, ALLEN 3-6 mm, all 25 mm Ratchet1/4 in, 72 teeth, 5 degree working angle Ratchet materialchrome vanadium Torque vs. standard+50% StandardISO 3315 Packaging typepaper / cardboard / corrugated board, box, no Euro hole Pack quantity37 pcs ManufacturerBosch Professional Questions and Answers What socket sizes are in the set? Ten 1/4 inch sockets: 5; 5.5; 6; 7; 8; 9; 10; 11; 12 and 13 mm. That is the list published by Bosch for part number 1600A03AC7. Which bits are included? Eighteen 25 mm bits: PH1, PH2, PH3; PZ1, PZ2, PZ3; SL0.5x4, SL0.6x5, SL1x6; T10, T15, T20, T25, T30; and ALLEN hex 3, 4, 5 and 6 mm. Can the set be used with a cordless screwdriver? Yes. The set includes a HEX to 1/4 inch square converter, which lets the sockets be driven by a screwdriver, and the reverse 1/4 inch to HEX adapter, which lets the bits be turned with the ratchet. How many teeth does the ratchet have? The ring gear has 72 teeth, which is a 5 degree working angle. The more teeth, the less swing is needed for the next one to engage - which matters when working in a confined space. Do sockets from other brands fit? Yes. The drive is a standard 1/4 inch square and accepts sockets, extensions and adapters of that size from any manufacturer. Does the set come in a case? The packaging Bosch specifies is a box without a Euro hole, and the official photograph shows the set laid out in a case with a moulded place for each piece. The catalogue piece count is 37. How does it differ from the 80-piece set? Set 1600A03AD0 has 80 pieces and combines two drives - 1/4 and 1/2 inch - so it also covers heavy fasteners. This set is 1/4 inch only and is aimed at small assembly work. ..

Bosch Ratchet Set 1600A03AD0, 1/4 and 1/2 inch, 80 pcs The Bosch 1600A03AD0 is an 80-piece set with two drives - 1/4 inch for small fasteners and 1/2 inch for heavy ones - laid out in a case. It is the largest set in the Bosch Professional hand tool range and is meant for the workshop and the service bay, where both fastener sizes turn up in the same job. The ratchet in the set The ratchets in this range use a powder-metallurgy ring gear with 72 teeth, giving a 5 degree working angle - that is all the swing needed for the next tooth to engage, and all there is to be had in a tight space. The body is chrome-vanadium steel, the neck is curved and the handle is soft-gripped. The manufacturer states power transfer up to 50% above the requirement of the ISO 3315 standard. The direction switch changes under the thumb, without taking the hand off the tool. Two drives in one case The 1/4 and 1/2 inch combination is the classic working pair. The small square carries a short lever and small sockets - the size for panels, boards and clips, where a larger tool simply does not fit and strips threads easily. The large square carries the long neck and the torque needed for anchors, structural bolts and running gear. One case with both sizes saves carrying two sets and hunting for the missing adapter. Build The ratchets are chrome-vanadium steel with a powder-metallurgy ring gear and a soft-grip handle. The case holds every piece in its place, so a missing socket shows itself when you open the lid rather than when you need it. The packaging Bosch specifies is a box without a Euro hole. Applications Servicing and maintenance of machinery and plant, automotive and agricultural repair, fitting steel structures and anchors, installation work, assembling and dismantling equipment. The set covers most of the usual range of threaded fasteners on a single site without reaching for a second box. What the manufacturer publishes For this part number Bosch states a drive size of 1/4 inch + 1/2 inch and 80 pieces. The manufacturer does not publish an itemised list of the individual sockets, extensions and bits for this article, so no such list is reproduced here - the contents can be seen in the official photograph of the case. Technical specifications Part number1600A03AD0 EAN4059952737409 Size1/4 in + 1/2 in Number of pieces80 Ratchetspowder-metallurgy ring gear, 72 teeth, 5 degree working angle Ratchet materialchrome vanadium Torque vs. standard+50% StandardISO 3315 Packaging typepaper / cardboard / corrugated board, box, no Euro hole Pack quantity1 pc ManufacturerBosch Professional Questions and Answers What drives does the set have? Two: a 1/4 inch square for small fasteners and a 1/2 inch square for heavy ones. That is the size Bosch states for part number 1600A03AD0. How many pieces are in the set? Eighty. The manufacturer publishes the piece count but not an itemised list of the individual sockets, extensions and bits for this article, so no such list is reproduced in the description. How many teeth do the ratchets have? The ratchets in this range use a powder-metallurgy ring gear with 72 teeth, which is a 5 degree working angle. The smaller the angle, the less room is needed for one engagement. Do sockets from other brands fit? Yes. Both drives are standard squares - 1/4 and 1/2 inch - and accept sockets, extensions, universal joints and adapters of those sizes from any manufacturer. What is the ISO 3315 standard? ISO 3315 sets the requirements for hand ratchets. Bosch states that the ratchets in this range transfer torque up to 50 per cent above the requirement of that standard. Does it come in a case? Yes, the official photograph shows the set laid out in a case with a moulded place for each piece and a carrying handle. Bosch specifies the packaging as a box without a Euro hole. How does it differ from the 37-piece set? Set 1600A03AC7 has the 1/4 inch drive only and 37 pieces - ratchet, sockets 5-13 mm, bits and adapters. This one adds a second 1/2 inch drive and runs to 80 pieces, so it also covers heavy fasteners. ..

Bosch Screwdriver 1600A039T9, slotted SL 1.2 x 6.5 x 125 mm The Bosch 1600A039T9 is a slotted screwdriver with an SL 1.2 x 6.5 profile and a 125 mm shank. Overall length is 235 mm, the shank is 6 mm in diameter and the blade is 1.2 mm thick. The shaft is chrome-vanadium steel and the tool weighs 0.094 kg. How the shaft is built Chrome-vanadium steel is what lets a screwdriver take twisting instead of the tip deforming on the first tight screw. Bosch states that the tool withstands torque up to 20% above the requirement of the ISO 2380 standard, which sets the dimensions and strength figures for slotted screwdrivers. The tip profile is SL 1.2 x 6.5 mm - 6.5 mm wide and 1.2 mm thick - which is the size for a medium to large slotted screw. Handle The handle is multi-component and 34 mm in diameter - thick enough to be gripped with the whole palm and to transfer torque without hurting the fingers. The front of the handle is hexagonal: it stops the screwdriver rolling off a sloping surface and allows extra turning force with a spanner on a particularly tight screw. The end carries colour coding and type and size markings, so the right driver is found in the bag by eye rather than by trial. The handle also has a tether hole for work at height. Applications Driving and removing slotted screws in electrical installation, maintenance, fitting hardware, assembling structures and general repair. The long 125 mm shank reaches a recessed screw without changing tools. Technical specifications Part number1600A039T9 EAN4059952736082 Screwdriver profileSL1.2x6.5 Shank length125 mm Overall length235 mm Shank diameter6 mm Blade thickness1.2 mm Handle diameter34 mm Height x width34 x 34 mm Shaft materialchrome vanadium Handlemulti-component Anti roll-off designyes Colour codingyes Torque vs. standard+20% StandardISO 2380 Weight0.094 kg Packaging typepaper / cardboard / corrugated board, hanger packaging with Euro hole Pack quantity1 pc ManufacturerBosch Professional Questions and Answers What is the exact tip size? The profile is SL 1.2 x 6.5 - a 6.5 mm wide tip, 1.2 mm thick. That is the designation Bosch publishes for part number 1600A039T9, and it is printed on the handle itself. How long is the screwdriver? The shank is 125 mm and the overall length with the handle is 235 mm. The shank is 6 mm in diameter and the handle 34 mm. What does +20% above ISO 2380 mean? ISO 2380 is the standard for slotted screwdrivers and sets their dimensions and resistance to twisting. Bosch states that this model withstands torque up to 20 per cent above the requirement of that standard. Why is the front of the handle hexagonal? The hexagon stops the screwdriver rolling off a sloping surface and gives flats that a spanner can grip for extra turning force on a particularly tight screw. What is the hole in the handle for? It is a tether hole. Working at height, the tool is clipped to a lanyard and will not fall if dropped - a requirement on many sites. What is the shaft made of? Chrome-vanadium steel. It is the usual material for a quality hand tool: it takes twisting and resists wear at the tip. Is it suitable for live electrical work? No. This is a standard screwdriver and is not declared as VDE-insulated to 1000 V. Work on live parts calls for an explicitly insulated VDE tool. ..

Bosch 1600A016BF ScrewdriversDescription: The Bosch 1600A016BF screwdriver set, consisting of 6 pieces, is an excellent tool for precise and reliable results. Each screwdriver is made of high-quality metal with tips that offer high precision. The screwdriver handles feature a soft-grip coating, which not only increases comfort during use but also provides extra grip for better control. The set includes 4 flat-head screwdrivers (SL ) and 2 Phillips-head screwdrivers (PH ), making it versatile and suitable for various types of tightening and loosening. Technical specifications:Profile: PH, SLLength: 75-125 mmMaterial: S2Quantity in set: 6 pcsThe set includes:4 x SL screwdriver2 x PH screwdriver..

Bosch 1600A02CV3 Screwdriver SetDescription: The Bosch 1600A02CV3 screwdriver set is a reliable tool designed for professional and hobby applications, made of high-quality metal. It features high-precision tips that guarantee perfect results every time. Thanks to the soft coating on the handles and the ergonomic design, they are extremely easy and comfortable to use, even during prolonged use. The handles provide a secure grip and control over the tool, offering comfort and convenience to the user. Technical Specifications:Profile: PH, PZ, SL, TXLength: 75, 100, 125 mmMaterial: S2Quantity per set: 6 pcsSet includes:1 x PH1x100 screwdriver1 x TX15x75 screwdriver1 x TX20x100 screwdriver1 x PZ2x125 screwdriver1 x SL3.5x75 screwdriver1 x SL6.5x125 screwdriver..

Bosch SL Screwdriver 1600A01TF9Description: The Bosch SL Screwdriver 1600A01TF9 is made of high-quality chrome-vanadium steel, ensuring a long service life without corrosion. The soft, ergonomic handle allows for full control when working with various tools. It features an SL profile and is 255 mm long, with an impact-resistant steel end cap. Technical Specifications:Diameter: 4.5 mmLength: 255 mmWidth: 6 mmHeight: 25 mmProfile: SLTip width: 4.5 mmTip thickness: 1 mmShank length: 100 mmHandle diameter: 33 mmWeight: 0.12 kg..

Bosch SL Screwdriver 1600A01TG0Description: The Bosch SL Screwdriver 1600A01TG0 is made of high-quality chrome-vanadium steel, ensuring a long service life without corrosion. The soft, ergonomic handle allows for full control when working with various tools. It features an SL profile and is 255 mm long, with an impact-resistant steel end cap. Technical Specifications:Diameter: 4.5 mmLength: 255 mmWidth: 6 mmHeight: 25 mmProfile: SLTip width: 5.5 mmTip thickness: 1 mmShank length: 100 mmHandle diameter: 33 mmWeight: 0.12 kg..

Bosch SL Screwdriver 1600A01TG1Description: The Bosch SL Screwdriver 1600A01TG1 is made of high-quality chrome-vanadium steel, ensuring a long service life without corrosion. The soft, ergonomic handle allows for full control when working with various tools. It features an SL profile and is 233 mm long, with an impact-resistant steel end cap. Technical Specifications:Length: 233 mmWidth: 34 mmHeight: 34 mmProfile: SLTip width: 6.5 mmTip thickness: 1.2 mmTail length: 120 mmHandle diameter: 36 mmWeight: 0.12 kg..

Bosch GWT 4 Tool BagDescription: The Bosch 1600A0265T tool bag is the ideal solution for professional workers who value good organization and quick access to their tools. Specially designed compartments and pockets, including a hammer holder and a nail pouch, allow for easy organization of your tools. The integrated bag holder is a functional feature that not only provides stability but also keeps the bags easily accessible while working. The bag is built for durability, featuring double-stitched seams and a reinforced 1000D polyester construction. With the Bosch Professional ProClick system, the bag can be easily attached and adjusted to a ProClick belt without having to remove the belt. Technical specifications:Color: black/blueMaterial: 1000D polyesterCapacity: 5 kgDimensions: 150 x 210 x 250 mmWeight: 0.9 kg..

Made from high-quality material that allows for the safe storage of various tools. Suitable for a wide range of tools. Offers excellent comfort and features multiple tool compartments to meet all your storage needs, with easy-access pockets. Ample space and instant access to your tools. Sold without tools Applications: - Construction, carpentry, electricians, craftsmen Features: - Model: 1619BZ0100 / 1.619.BZ0.100 - Quality for professional and hobby use - 5 internal side pockets - Volume: 40 L - Load capacity: 15.00 kg - Dimensions: 480x300x280 mm - Weight: 1.50 kg..

Stanley FMHT10362-0 Left-Handed Folding KnifeDescription: The Stanley FMHT10362-0 box cutter is an innovative tool for opening boxes, but it's not just that. It's ideal for use with your left hand while your right hand is occupied with another task, ensuring maximum productivity on the job. It features 3 cutting depth settings depending on the specific task. The handle is extremely lightweight and comfortable for extended use without fatigue. It includes a blade lock to prevent injury. It features a convenient button that extends the blade with a single press, eliminating the need for manual assembly. For user convenience, the knife comes with 4 blades that can be easily stored in the knife handle. The knife also features a hanging loop for easy storage and transport. Technical Specifications:Type: Fixed, for left-handed useHandle material: Bi-materialBlade material: Steel..

Stanley STHT10356-0 Box CutterDescription: The Stanley STHT10356-0 box cutter is a specially designed tool for quick and easy opening of boxes. It features a small blade at the bottom of the cutter for quickly piercing the box packaging, followed by effortless opening with the sharp blade. The innovative blade design fully protects the user from injury. The handle is made of high-quality material and allows for easy handling and control. The knife is extremely lightweight and suitable for extended use without fatigue. It features a hanging and storage hole for hands-free operation while working. Technical specifications:Type: FixedHandle material: Bi-materialBlade material: SteelLength: 70 mm..

Knipex 11 06 160 Cable Stripping PliersDescription: Knipex 11 06 160 cable and insulation pliers are specially designed for stripping cable insulation with high efficiency and safety. They are suitable for use with both single-core and multi-core cables, as well as cables with fine conductors covered with plastic or rubber insulation, with a maximum cable cross-section of up to 10 mm2. The tool is equipped with an adjustment screw that allows for easy setting of the desired conductor or strand diameter. The knurled-head bolt and locknut ensure a secure lock on the setting, guaranteeing precision during operation. The pliers are made of special tool steel, forged and oil-hardened, which ensures their strength and durability. The jaws are coated with chrome plating to protect against corrosion and increase strength. The pliers' handles are VDE-insulated up to 1000 V, ensuring safe operation in electrical environments and protecting the user from electric shock. Technical specifications:Material: hardened tool steelInsulation type: VDE coatingTested to 1000 V VDE: yesStripping capacity: 0.5-10 mm2Jaw coating: chrome-platedStandard: IEC 60900 DIN EN 60900..