Aluminum ladder for installation, repair..
Adjustable wrench for installation, repa..
Power Extension Cord for Workshops, Repa..
Adjustable wrench for repair, installati..
Gidoriya for cutting and repairing threa..
Pickaxes for construction, excavation, a..
Knife sharpener for a precise and contro..
Knives for precision cutting, installati..
Putty knives for precise preparation of ..
A trowel for smoothing plaster, render, ..
Trowel for precision work with construct..
Cable ties for cable management, install..
Pipe wrench - a secure grip when working..
Sheet metal shears for precise manual cu..
Chisels for precision woodworking and ro..
Hand truck for transporting loads in wor..
Pruning shears for precise pruning of gr..
Vacuum Grippers and Suction Cups: Reliab..
Sockets: A versatile tool for any projec..
Woodworking Tools: Reliable Solutions fo..
Pliers: A versatile tool for all kinds o..
Wrenches: Indispensable tools for any jo..
Carts: Indispensable Helpers for Any Wor..
Gedore and Gedore Sets: The Key to Profe..
Tool Sets: The Perfect Solution for Any ..
Toolboxes and Organizers: The Perfect So..
Craft knives - precise cutting for every..
Vise - an indispensable tool for stabili..
Taps and dies - precise creation and rep..
Sockets and Bits - Precision and Reliabi..
Riveter - Strong and Reliable Joining of..
Scissors - precision and convenience for..
Screwdrivers-an indispensable tool for e..
Saws - Precision Material Processing for..
Hand-held staplers - fast and reliable f..
Hand-held pipe and drain unclogging mach..
Hand-held pipe cutters - precise and eas..
Chisels - Power and Precision for Workin..
Specialized Hand Tools - Precision for S..
Clamps - Secure Clamping and Stability f..
Ratchets - precision, speed, and conveni..
Tripods and measuring rods - stability a..
Saws - precise and reliable cutting for ..
Tool Bags - Convenience, Organization, a..
Hammers - Power, Precision, and Versatil..
Trowels - Precision and a Polished Finis..
Brand: Stanley
Stock: In Stock
Yellow polypropylene, reinforced with glass fiber. Easy blade replacement. Comes with blade 21-293. Plastic housing.
Length, mm: 270.00 mm
Brand: Stanley
Material: plastic
Model: 5-21-103
Application: for drywall
Series: Stanley
Weight: 0.17 kg
Width, mm: 250.00 mm..
-16%
6.00€ 7.16€
Ex Tax:5.00€
Brand: Stanley
Stock: In Stock
Yellow polypropylene, reinforced with glass fiber. Easy blade replacement. Comes with blade 21-293. Plastic body.Length, mm: 155.00 mm
Brand: Stanley
Material: plastic
Application: for drywall
Series: Stanley
Weight: 0.09 kg
Width, mm: 140.00 mm..
-6%
5.98€ 6.39€
Ex Tax:4.98€
Brand: Stanley
Stock: In Stock
STANLEY 5-21-122 Surform Combination Planer File, 255 mm blade
The STANLEY 5-21-122 is a combination plane-and-file from the Surform system, with a die-cast metal body and a replaceable 255 mm blade. The manufacturer designates it a SURFORM Metal Body Combination Planer File - a tool that works both as a plane and as a file.
Two working positions
The key feature is that the blade fits in two different positions. In one the tool is worked as a plane, with a long stroke across the surface. In the other it works as a file, with a more aggressive bite. One tool therefore covers both coarse stock removal and the smoothing that follows.
The Surform blade
The blade is perforated steel, 40 mm wide and 255 mm long. The holes pass shavings up and away instead of collecting them ahead of the edge - which is why a Surform does not clog on soft materials, where an ordinary file jams after a few strokes. The blade is replaceable; STANLEY states that the article is supplied with a standard-work blade, 5-21-293. The shop stocks both suitable consumables - 5-21-293 and 5-21-299.
Body and handle
The body is die-cast metal and 305 mm long, with a polypropylene handle. The metal body holds the blade taut and does not flex under pressure, which is the difference from the plastic planes in the same range. Overall dimensions are 300 x 115 x 40 mm at a weight of 1.38 kg.
Applications
Used for shaping and smoothing timber, plywood, plasterboard, gypsum board, plastic and soft non-ferrous metals. Typical jobs are taking a plasterboard edge back to the line, trimming a door that binds, and smoothing a ragged sawn edge.
Note on the designation
The manufacturer's marketing name says "310 mm" and refers to the body, whose specified length is 305 mm. The 255 mm in the shop record's name is the length of the blade - both figures come from STANLEY's data, they simply measure different parts.
Technical specifications
Article5-21-122
SystemSTANLEY Surform
TypeCombination planer file
Working positions2 - as a plane and as a file
Blade length255 mm
Blade width40 mm
Blade materialSteel, perforated (Surform Cut)
Replaceable bladeYes
Blade supplied per manufacturer5-21-293
Body length305 mm
Body materialDie-cast metal
Handle materialPolypropylene
Dimensions (L x W x H)300 x 115 x 40 mm
Weight1.38 kg
Number of pieces1
Questions and Answers
Which replacement blade does it take?
STANLEY states that the article is supplied with a standard-work blade, 5-21-293. The shop also stocks 5-21-299, likewise for the 21-122 plane - both are 250-255 mm long.
What does a combination planer file mean?
The blade fits in two different positions. In one the tool is worked as a plane with a long stroke, in the other as a file with a more aggressive bite. One tool covers both coarse removal and smoothing.
Why does the name say 255 mm when STANLEY's site says 310 mm?
The two figures measure different parts. 255 mm is the specified blade length, while the manufacturer's marketing name refers to the body, whose length in the same specification is 305 mm.
Does it clog on soft material?
The blade is perforated - the holes pass shavings up and away instead of collecting them ahead of the edge. That is exactly why a Surform works on plasterboard, gypsum and soft timber, where an ordinary file jams after a few strokes.
What materials does it work on?
Timber, plywood, plasterboard, gypsum board, plastic and soft non-ferrous metals. It is not intended for hardened steel or hard abrasive materials.
How does it differ from the plastic planes in the range?
The body here is die-cast metal and 305 mm long. A metal body holds the blade taut and does not flex under pressure, while the plastic models are lighter and cheaper but also more flexible.
How much does the tool weigh?
The manufacturer's stated weight is 1.38 kg, with overall dimensions of 300 x 115 x 40 mm. The handle is polypropylene.
..
-10%
13.29€ 14.83€
Ex Tax:11.08€
Brand: Stanley
Stock: In Stock
An excellent tool for planing wood, plastic, soft metals, and many other materials. Made of cast alloy, metallic gray. Sturdy plastic handle for heavy-duty use. Equipped with a replaceable blade (10"/250 mm). Use replaceable blade 21-293 for standard scraping, 21-393 for fine scraping, and 21-299 for a half-round blade.
Length, mm: 440.00 mm
Brand: Stanley
Material: metal
Model: 5-21-295
Application: for drywall
Series: Stanley
Weight: 0.32 kg
Width, mm: 250.00 mm..
12.27€
Ex Tax:10.23€
Brand: Stanley
Stock: In Stock
Long handles for easier use. Designed for steel, aluminum, and stainless steel rivets. 4 interchangeable rivet tips: 2, 3, 4, and 5 mm.
Maximum in stainless steel: 5.00 mmMaximum in metal: 5.00 mmBrand: StanleyModel: 6-MR100 Series: StanleyWeight: 0.61 kg..
-22%
28.00€ 35.79€
Ex Tax:23.33€
Brand: Stanley
Stock: In Stock
Steel oval frame prevents bending. Simple and quick blade installation. Hardened teeth that do not require sharpening. Hand guard. Ideal for fresh wood.
Length, mm: 610.00 mm
Brand: Stanley
Model: 1-15-368
Application: for wood
Series: Stanley
Weight: 0.73 kg..
8.69€
Ex Tax:7.24€
Brand: Stanley
Stock: In Stock
Stanley STHT80894-1 Foot PumpDescription:
The Stanley STHT80894-1 automotive foot pump offers convenience and efficiency when inflating tires, balloons, and other items. Equipped with a rubberized foot pedal for comfortable operation, this pump ensures quick and easy inflation. With the ability to directly read pressure in psi and bars, users can easily monitor pressure while in use. This pump is versatile and can be used to inflate car tires, bicycle tires, as well as balloons, thanks to the included adapter. With its compact design, the pump is easy to store in the car, taking up very little space.
Technical specifications:Units: psi and barWeight: 1 kg..
12.30€
Ex Tax:10.25€
Brand: Stanley
Stock: In Stock
The Stanley 1-13-906 set comes in a special case that closes with a latch to prevent moisture from entering and bits from getting lost if dropped.
8 x 25 mm Torx bits: TX8, TX10, TX15, TX20, TX27, TX30, and TX40.
7 x 1/4-inch sockets: 6, 7, 8, 10, 11, 12, and 13 mm
4 x 25 mm bits: 4, 5, 6, 7, and 8 mm
4 x Hex 25 mm bits: 3, 4, 5, and 6 mm
7 x Pinned Torx 25 mm bits: TX10, TX15, TX20, TX25, TX27, TX30, and TX40
3 x Phillips 25 mm bits: PH1, PH2, and PH3.
3 x Pons 25 mm bits: PZ1, PZ2, and PZ3.
1 x bit adapter
1 x bit adapter
1 x 1/4-inch drive..
-66%
22.50€ 65.96€
Ex Tax:18.75€
Brand: Stanley
Stock: Delivery in 1-3 days
The body is made of duralumin alloy. Ideal for joining frames at a 90° angle.Working length, mm: 75.00 mm
Brand: Stanley
Material: metal
Series: Stanley
Weight: 0.32 kg..
7.98€
Ex Tax:6.65€
Brand: Stanley
Stock: In Stock
STANLEY 0-10-601 Multi-Purpose KnivesDescription:
STANLEY 0-10-601 disposable utility knives are designed for a wide variety of materials such as paper, cardboard, plastic, and more. The plastic handle provides a secure and comfortable grip, while the sharp blade ensures precision during use. They are designed for single use, and once the blade is worn out, it cannot be replaced. Available in a pack of 3.
Technical specifications:Blade type: PointedHandle material: PlasticLength: 140 mmQuantity per pack: 3..
-10%
1.82€ 2.02€
Ex Tax:1.52€
Brand: Stanley
Stock: In Stock
Stanley Tape MeasureDescription:
The Stanley FatMax 10m
tape measure is made of high-quality materials, making it very durable and wear-resistant. The tape features a special coating that prevents scratching and reduces wear on the markings. The first 20 cm
of the tape are reinforced to prevent bending and breaking at the most vulnerable part of the tape measure. It is equipped with a safety mechanism that protects the tape when it is pulled out and keeps it taut, making it easier to use when the operator is working alone. Measurement units are printed on both sides of the tape for easy reading, even in awkward positions. Ergonomically designed two-piece casing that fits comfortably in your hand. Features a locking mechanism and a belt clip for easy storage.
Technical specifications:Tape length: 10 mTape width: 33 mmHousing material: Bi-materialLocking mechanism: YesStandard: EC Class IIPrinting: Double-sidedHook type: Multi-CatchDimensions (H x W x D): 20 cm x 12 cm x 6 cmWeight: 0.693 kg..
-38%
29.85€ 48.06€
Ex Tax:24.88€
Brand: Stanley
Stock: In Stock
Stanley Tape MeasureDescription:
The Stanley FatMax 8m
tape measure is made of high-quality materials, making it very durable and wear-resistant. The tape features a special coating that prevents scratches and reduces wear on the markings. The first 20 cm
of the tape are reinforced to prevent bending and breaking at the most vulnerable part of the tape measure. It is equipped with a safety mechanism that protects the tape when it is pulled out and keeps it taut, making it easier to use when the operator is working alone. Measurement units are printed on both sides of the tape for easy reading, even in awkward positions. Ergonomically designed two-piece casing that fits comfortably in your hand. Features a locking mechanism and a belt clip for easy storage.
Technical specifications:Tape length: 8 mTape width: 32 mmHousing material: Bi-materialLocking mechanism: YesStandard: EC Class IIPrinting: Double-sidedHook type: Multi-CatchDimensions (H x W x D): 20 cm x 12 cm x 6 cmWeight: 0.590 kghttps://www.stanleytools.co.uk/EMEA/PRODUCT/VIDEOS/FMHT33105-5/FMHT33105-5_STANLEY-FATMAX-8M-26 32mm-wide-Tape-Measure-33sec-16x9_VFB1.mp4..
-16%
33.23€ 39.37€
Ex Tax:27.69€
Brand: Stanley
Stock: In Stock
Stanley FATMAX BladeArmor Magnetic Tape Measure, 8 m x 32 mm
A tape measure from the FATMAX range with an 8 metre blade 32 mm wide. The hook is magnetic and grips steel by itself, and the blade is accuracy class II - a tolerance of ±0.5 mm per metre.
Standout of 4.2 metres
Standout is 4.2 m. That is the length over which the extended blade holds itself horizontally without folding down. Measuring across a room or along a ceiling, this figure decides whether you can work alone or need a second person to hold the end.
BladeArmor and the blade coating
The first 7.5 cm of the blade are reinforced with BladeArmor - exactly the section that is pulled out and retracted on every measurement and the first to tear. The rest of the blade carries an abrasion-resistant polyester film for which Stanley states up to 10 times the wear resistance of a standard lacquered blade.
The hook
The hook is Tru-Zero - it slides by exactly its own thickness, so zero stays true for both inside and outside measurements. The design is multi-catch: it grabs an edge from above, below and the side rather than only from below. The magnet is detachable, so it can be removed when it is in the way.
Applications
Drywall, carpentry, steel structure and HVAC work, where the magnetic hook latches onto a stud or a duct and frees a hand. Weight is 0.45 kg, with a built-in belt clip.
What is in the delivery
1 x Stanley FATMAX BladeArmor magnetic tape measure, 8 m x 32 mm
The manufacturer gives a 2 year limited warranty.
Technical specifications
Article numberFMHT0-33868
RangeFATMAX BladeArmor
Blade length8 m
Blade width32 mm
Accuracy classclass II (±0.5 mm per metre)
Standout4.2 m
Blade coatingabrasion-resistant polyester film
BladeArmor reinforcementfirst 7.5 cm
HookTru-Zero, multi-catch
Magnetic hookyes, detachable
Belt clipyes
Weight0.45 kg
Warranty2 year limited
Questions and Answers
What does a 4.2 m standout mean?
That is how much blade can be extended horizontally before it folds down under its own weight. Measuring across a room or along a ceiling, it decides how far you can reach alone without a second person at the end.
What is accuracy class II?
The European accuracy category for measuring tapes. Class II allows a deviation of up to ±0.5 mm per metre. For construction and installation work this is the usual class.
Does the magnet come off?
Yes, the magnetic hook is detachable. The magnet helps on steel studs and ducting but gets in the way when working near swarf or sensitive electronics.
What is BladeArmor?
Reinforcement of the first 7.5 cm of the blade - the section that moves on every measurement and tears first. The rest of the blade carries an abrasion-resistant polyester film.
Why does the hook move?
It is a Tru-Zero hook. The play equals exactly the thickness of the hook itself, so on an outside measurement it is pushed out and on an inside one pulled in, keeping zero true either way. A moving hook is not a fault.
How wide is the blade and why does it matter?
32 mm. A wider blade holds itself horizontally for longer before folding - which is why the standout on this tape is 4.2 m.
Is there a belt clip?
Yes, the clip is built into the case. The tape weighs 0.45 kg.
..
-44%
15.11€ 27.10€
Ex Tax:12.59€
Brand: Stanley
Stock: In Stock
STANLEY FATMAX FMHT0-10311 Folding Pocket Knife The STANLEY FATMAX FMHT0-10311 is a folding pocket knife with a combination blade - part plain edge, part serrated. The manufacturer classifies it as a pocket knife in the FATMAX range and describes it as a slim, lightweight design for heavy-duty use. Combination blade One blade covers two different jobs. The plain section cuts cleanly through paper, card, film, thin plastic and leather. The serrated section bites and handles rope, webbing, cable insulation and plastic strapping, where a plain edge simply skates. Blade length is 80 mm according to the manufacturer. One-handed opening The blade carries a thumb stud, so the knife opens with the hand holding it. That matters in practice when the other hand is holding a workpiece, a ladder or a cable. Liner lock The blade locks open with a liner lock - a sprung leaf that moves behind the heel of the blade. The lock stops the blade folding onto the fingers under pressure and releases with the thumb, again one-handed. Body and dimensions The body is stainless steel according to the manufacturer's specification, with a finger-contoured ergonomic handle. Closed, the knife measures 190 x 20 x 30 mm at a weight of 0.18 kg. The manufacturer supplies it on a carded blister. Applications The knife is for daily work on site and in the workshop: opening packaging, cutting insulation, tape, rope and strapping, preparing cables. Its slim profile lets it ride in a work trouser pocket without getting in the way. Technical specifications ArticleFMHT0-10311 RangeSTANLEY FATMAX TypeFolding pocket knife BladeCombination - plain and serrated Blade length80 mm OpeningThumb stud, one-handed LockLiner lock Body materialStainless steel Replaceable bladeYes Closed dimensions (L x W x H)190 x 20 x 30 mm Weight0.18 kg Belt clipNo Manufacturer packagingCarded blister EAN3253560103118 Questions and Answers Why is half the blade serrated? The plain section cuts cleanly through paper, card, film and leather, while the serrated section bites into rope, webbing, cable insulation and plastic strapping, where a plain edge skates. One knife therefore covers both jobs. Does it open one-handed? Yes. The blade has a thumb stud so it deploys with the hand holding the knife. That is useful when the other hand is on a workpiece, a cable or a ladder. How does the blade lock? With a liner lock - a sprung leaf moves behind the heel of the blade and holds it open. It releases with the thumb, again one-handed. How long is the blade? The manufacturer states a blade length of 80 mm. Closed, the knife is 190 x 20 x 30 mm and weighs 0.18 kg. Is there a belt clip? No. According to the manufacturer's specification this model has no belt clip. The slim profile is intended for pocket carry. Is the blade replaceable? The manufacturer states that the blade is replaceable. That extends the knife's life once the serrated section dulls from cutting rope and strapping. What is it made of? STANLEY's specification gives a stainless steel body. For the blade itself the manufacturer's own sources are not consistent with each other, so no steel grade is stated here. ..
-16%
13.29€ 15.85€
Ex Tax:11.08€
Brand: Stanley
Stock: In Stock
Stanley FatMax Hammer Tacker, Type G Staples 8-12 mm, FMHT81394-9
Stanley FatMax (article number FMHT81394-9) is a hammer tacker for Type G staples in 8, 10 and 12 mm. The magazine holds up to three sticks at once, and the tool weighs 820 g. The housing is nylon composite with a rubberised handle.
What a hammer tacker is for
With an ordinary tacker you squeeze a trigger; with a hammer tacker you swing it like a hammer and the staple fires on impact with the surface. The difference is pace: one-handed and without aiming, you drive staples at a rate a hand tacker cannot match. That is why the tool exists only for high-volume, low-precision jobs - roofing felt, insulation, vapour barrier, underlay, carpet. Where the exact position of the staple matters, use a conventional tacker.
Three sticks in the magazine
The magazine takes three sticks at a time. On roofing felt or vapour barrier that is the difference between working continuously and climbing down to reload - and reloading at height is precisely what slows the job. Loading is from the bottom, dropping the sticks straight into the magazine with nothing to dismantle.
Staple level indicator
The body carries a fastener reload indicator. On a hammer tacker that is more useful than it sounds: an empty tool keeps swinging and striking exactly as before, so without an indicator you discover several metres of felt fixed with nothing at all.
Composite housing, 820 g
The housing is nylon composite rather than cast steel. On a tool swung for hours at a time, 820 g is materially less than metal equivalents - and shoulder fatigue is the real limit on this kind of work, not durability. The handle is ergonomically shaped and rubberised. There is also a reversible belt clip that mounts on either side depending on which hand you work with.
Which staples it takes
The tacker fires Stanley Type G staples in three lengths: 8 mm (TRA705T), 10 mm (TRA706T) and 12 mm (TRA708T). Type G is the heavy-duty series - thicker wire and a wider crown than the fine Type A staples, which is why it holds in rough materials. Staples of any other type will not load.
Choosing the length
The rule is that the staple should penetrate the substrate at least as deep as the thickness of the material being fixed. For thin film onto board, 8 mm is enough; for roofing felt and underlay, 10 mm is the usual choice; 12 mm suits thicker insulation and soft substrates where a short staple does not grip.
Technical specifications
ManufacturerStanley FatMax
Article numberFMHT81394-9
TypeHammer tacker
StaplesType G, 8 mm (TRA705T), 10 mm (TRA706T), 12 mm (TRA708T)
Magazine capacityUp to 3 sticks
LoadingBottom, drop-in
Reload indicatorYes
HousingNylon composite
HandleErgonomic, rubberised
Belt clipReversible
Weight820 g
ApplicationsRoofing felt, insulation, films, underlay, carpet
Questions and Answers
Which staples does it take?
Stanley Type G staples in three lengths: 8 mm (TRA705T), 10 mm (TRA706T) and 12 mm (TRA708T). Type G is the heavy-duty series with thicker wire; other types will not load.
How does it differ from a regular tacker?
There is no trigger - you swing the tool like a hammer and the staple fires on impact. That delivers pace a hand tacker cannot match, at the cost of precision. Where the exact position matters, use a conventional tacker.
What jobs does it suit?
Roofing felt, insulation, vapour barrier, underlay and carpet - high-volume work where the exact position of each staple does not matter.
How many staples does it hold?
The magazine takes three sticks at once. Working on a roof, that is the difference between staying up there and climbing down to reload.
What staple length should I choose?
The staple should penetrate the substrate at least as deep as the material being fixed. Thin film onto board takes 8 mm, roofing felt and underlay usually 10 mm, and 12 mm suits thicker insulation and soft substrates.
What is the reload indicator for?
An empty hammer tacker keeps swinging and striking exactly as before. Without an indicator you find several metres of felt fixed with nothing - which is why the indicator earns its place.
Why a composite housing rather than metal?
On a tool swung for hours, weight is the real limit. 820 g is materially less than metal equivalents, and nylon composite takes the impact without loading your shoulder.
..
-11%
49.00€ 55.22€
Ex Tax:40.83€
Brand: Stanley
Stock: In Stock
Stanley FatMax Speed Drive Ratcheting Screwdriver, FMHT62692-0
Stanley FMHT62692-0 is a ratcheting screwdriver from the FatMax range with the Speed Drive mechanism. It is 290 mm long, weighs 0.293 kg, and is built from chrome vanadium steel. Three double-ended bits are supplied.
What Speed Drive does
With an ordinary ratchet, driving is interrupted: you turn, bring your hand back, turn again. Speed Drive lets you twist the handle left and right without letting go - the mechanism turns both motions into progress down the screw. The effect is a 360° drive and work that is up to twice as fast over a run of screws.
The three zones of the handle
The handle is not one shape along its length - it has three zones with different jobs:
Speed zone - the narrow part you spin with your fingers while the screw is still going in freely.
Torque zone - the wide part you grip with the whole palm for the final tightening.
Precision tactile zone - for fine work where feeling the resistance matters more than pushing through.
The coating is bi-material, which keeps the grip working with an oily hand.
Bit retention
The holder is locking and the tip is magnetic. Together they solve two different problems: the magnet holds the screw while you place it one-handed, and the lock holds the bit so it does not stay behind in the screw head when you pull the driver away.
Bits and storage
The set includes 3 double-ended bits, so six tips in all: PH1, PH2, PZ1, PZ2 and 4 mm and 5.5 mm slotted. They stow inside the handle - which in practice means the screwdriver always travels with its bits, and you never arrive on site holding a driver with nothing to put in it.
Who it is for
A ratcheting screwdriver is a tool for repetitive work - fitting ironmongery, wiring consumer units, assembling furniture, hinges and locks. Where there are twenty screws and more, each needing ten turns, the difference against a plain screwdriver adds up to real minutes. On one screw an ordinary screwdriver is just as good; on twenty, it no longer is. At 290 mm and under 300 grams this one sits between a pocket driver and a full carpenter's screwdriver: long enough to apply torque, light enough to live in the bag permanently.
Technical specifications
ManufacturerStanley
Article numberFMHT62692-0
RangeFatMax Speed Drive
TypeRatcheting screwdriver / bit holder
Length290 mm
Weight0.293 kg
MaterialChrome vanadium steel
HandleBi-material, three zones
Bit holderLocking, magnetic tip
Bits included3 double-ended - PH1/PH2, PZ1/PZ2, 4 mm/5.5 mm
StorageInside the handle
Warranty1 year
Questions and Answers
What does Speed Drive do?
It lets you twist the handle left and right without letting go - both motions drive the screw. Over a run of screws that is up to twice as fast.
Which bits are included?
3 double-ended bits, so six tips: PH1, PH2, PZ1, PZ2 and 4 mm and 5.5 mm slotted. They stow inside the handle.
How do you reverse the ratchet?
The ratchet mechanism pulls forward and clicks into the other position. There is also a neutral setting in which the driver works as a rigid screwdriver.
Why does the handle have three zones?
Each is for a different phase: the narrow speed zone while the screw runs in freely, the wide torque zone for final tightening, and the precision zone when feeling the resistance matters.
Does the bit stay behind in the screw?
No - the holder is locking. The magnetic tip meanwhile holds the screw while you place it one-handed. The two solve different problems.
Does it take other bits?
The holder is a standard 1/4" hex, so it takes ordinary bits. The double-ended bits in the set have a longer body and stow in the handle.
What is it made of?
Chrome vanadium steel, with a bi-material coating on the handle. The warranty is 1 year.
..
-10%
22.00€ 24.50€
Ex Tax:18.33€
Brand: Stanley
Stock: In Stock
STANLEY FATMAX TradeLift Plus Extension Accessory FMHT83556-1 (Twin Pack)
The STANLEY FATMAX FMHT83556-1 is a telescopic extension accessory for the TradeLift hand lifting tool, supplied by the manufacturer as a twin pack. It raises the tool's working height into the 295-685 mm range and carries a load of up to 150 kg.
What the accessory does
The TradeLift on its own works in the low range. The extension slides over the bar and is secured behind the lift plate, continuing the stroke upwards without changing how the tool is used. Its lift plate replicates the parameters of the base plate, so the bearing area under the workpiece stays the same and no stability is lost.
Tool-free attachment and adjustment
The accessory is secured by aluminium levers at the base - no spanners, no screws. It locks behind the lift plate so it cannot separate from the tool during operation. Height is set with aluminium locking pins at three positions, again without tools.
Material and surface protection
Construction is aluminium with reinforced plastic components. A removable cover on the lifting plate protects finished surfaces from scratches and marks - which matters when fitting furniture and already-painted components. The article carries the CE mark.
Applications
The manufacturer names three typical cases: fitting wall cabinets, bath levelling and fitting and installing staircases. What they share is a heavy or bulky component that has to be raised, held at an exact height and adjusted by one person.
Pack contents and related articles
STANLEY lists FMHT83556-1 as two telescopic extension accessories. The same accessory is also sold singly under article FMHT83554-1. The extension is an addition to the TradeLift - the lifting tool itself is not part of this article.
Technical specifications
ArticleFMHT83556-1
RangeSTANLEY FATMAX TradeLift Plus
TypeTelescopic extension accessory for hand lifting tool
Pieces in the manufacturer's pack2
Working height295-685 mm
Maximum load150 kg
Telescopic positions3, with aluminium locking pins
AttachmentAluminium levers, tool-free
AdjustmentTool-free
MaterialAluminium with reinforced plastic components
Surface protectionRemovable cover on the lifting plate
Dimensions without packaging (L x W x H)85 x 105 x 295 mm
Dimensions with packaging (L x W x H)295 x 140 x 200 mm
Weight2.3 kg
CE markYes
Single-pack articleFMHT83554-1
Questions and Answers
Which tool is this accessory for?
It is for the STANLEY FATMAX TradeLift hand lifting tool. It slides over the tool's bar and is secured behind the lift plate, continuing the stroke upwards. The lifting tool itself is not part of the article.
What height does it reach?
The manufacturer states working heights of 295-685 mm for the accessory. The telescope locks at three positions with aluminium pins, so height is set in steps and without tools.
How many kilograms does it take?
STANLEY states a maximum load of 150 kg. The lift plate replicates the parameters of the tool's base plate, which keeps the bearing area and the stability at that load.
Are tools needed to fit it?
No. It is secured by aluminium levers at the base, and height is set with aluminium locking pins. Neither operation needs spanners or screws.
Can it separate from the lift during work?
The accessory locks behind the lift plate. STANLEY states that it therefore cannot come away from the tool in operation - that is built into the design, not an added precaution.
Will it scratch a finished surface?
The lifting plate carries a removable cover made for exactly that - protecting finished surfaces from scratches and marks when fitting furniture and painted components.
Is there a single-accessory version?
Yes. Article FMHT83556-1 contains two accessories, and the same accessory on its own is article FMHT83554-1 according to the manufacturer.
..
85.10€
Ex Tax:70.92€
Brand: Stanley
Stock: In Stock
Stanley FatMax Xtreme Twin Blade Utility Knife, 0-10-789
Stanley 0-10-789 is a twin-blade retractable utility knife from the FatMax Xtreme range. The body is metal, with rubber grips and an overlapping nose. Blade changes are tool free through the InstantChange system.
The two blades
The point of this knife is to replace two tools. It has two independent sliders, each with its own blade - normally one straight and one hook. The straight blade cuts cardboard, insulation, sheeting and gaskets; the hook is for materials cut by pulling: roofing felt, linoleum, carpet, belting.
The practical benefit is on work where the two kinds of cut alternate - laying flooring, roofing, unpacking and fitting. Instead of carrying two knives or changing the blade mid-cut, you retract one and extend the other.
Interlocking sliders
The sliders are interlocked - only one blade can be extended at a time. That is no small detail: a knife with two blades out at once is dangerous in a pocket, in a bag and when dropped.
Blade storage
Total capacity is 11 blades: 2 in use and 9 in the handle. On a utility knife that is the difference between changing a dull blade at once and pushing it to the end because the spares are in the van. The knife ships with two straight and two hook blades.
Body and grip
The body is metal - not plastic with a steel insert. The overlapping nose holds the blade steady, without the play that snaps the tip when cutting dense material. The rubber grips reduce fatigue and prevent slipping with a wet or greasy hand.
Compatibility and warranty
The knife works with most standard trapezoid blades. Handle length is about 175 mm, blade length about 62 mm. Stanley backs it with a limited lifetime warranty.
Technical specifications
ManufacturerStanley
Article number0-10-789
RangeFatMax Xtreme
TypeTwin-blade retractable utility knife
Blade capacity11 (2 in use, 9 stored)
Supplied with2 straight and 2 hook blades
Blade changeInstantChange, tool free
LockingInterlocked - one blade at a time
BodyMetal, with rubber grips
Handle lengthabout 175 mm
WarrantyLimited lifetime
Questions and Answers
Why two blades?
To replace two tools: normally one straight blade for cardboard, insulation and sheeting and one hook blade for materials cut by pulling - felt, linoleum, carpet.
Can both blades be out at once?
No - the sliders are interlocked and only one can be extended. A knife with two blades out is dangerous in a pocket and when dropped.
How many spare blades does it hold?
Total capacity is 11 blades - 2 in use and 9 in the handle. That is the difference between changing a dull blade at once and pushing it to the end.
Do I need a tool to change the blade?
No - the InstantChange system allows changes without a screwdriver and without dismantling the body.
Does it take standard blades?
Yes - it works with most standard trapezoid blades. Two straight and two hook blades are supplied.
Is the body plastic?
No - the body is metal, with rubber grip inserts. The overlapping nose holds the blade without the play that snaps tips in dense material.
When do you use a hook blade?
On materials cut by pulling toward you - roofing felt, linoleum, carpet, belting. The hook catches the material so it cannot slip, and the tip does not dig into the substrate below.
..
10.23€
Ex Tax:8.53€
Brand: Stanley
Stock: In Stock
Ergonomic design for comfort and extended use. Metal body for added durability. Soft grip and thumb rest for comfort and control. Convenient for cutting strips and opening boxes without damaging the contents. Quick blade change for fast use. Blade magazine for easy storage and quick replacement. Belt clip for convenient carrying of the knife170 mm, folding..
13.29€
Ex Tax:11.08€
Brand: Stanley
Stock: In Stock
Rubberized, impact-resistant ABS housing-ergonomic and comfortable. Compact case that fits easily in a pocket or bag. Convenient key ring for attaching keys.
Length, m: 2.00 m
Brand: Stanley
Tape material: steel
Model: FMHT33856
Series: FatMax
Weight: 0.03 kg..
3.58€
Ex Tax:2.98€