Hand tools - Page 57

Sola 50050901 Tape Measure for Long LengthsDescription: The Sola Tracker TR 20 m/B steel tape measure is a reliable tool made from a high-quality lightweight aluminum housing, ensuring the tool's strength and durability. The tape measure's handle is ergonomic and made of plastic, providing a comfortable grip and control during measurements. The tape measure's steel tape is sturdy and features an anti-corrosion phosphate coating, ensuring its durability and protection against corrosion. The tape has a white matte lacquer finish, which ensures easy reading of measurement results without glare. The tape measure features a multifunctional end stopper that allows for securing pipes, nails, and bolts, for greater convenience and precision during use. The tape measure meets Class II accuracy according to the EC Directive, which guarantees its precision and reliability during measurements. Technical specifications:Tape length: 20 mTape width: 13 mmHousing: AluminumTape: MetalFeature: for long lengthsMagnet: NoAccuracy class: II EGWeight: 0.875 kg..

Pica Classic 541 Stonemason Pencil, Graphite 10H, 30 cm - 541/30-100 Pica Classic 541 is a stonemason pencil with an oval cross-section and a graphite lead in the special hardness 10H. The manufacturer Pica-Marker offers it in professional quality for marking stone, concrete and brick. Article 541/30-100 is the 30 cm version. The photo shows the Classic 541 pencil, which the manufacturer offers in 24 and 30 cm lengths. Wood and graphite The body is made of easy-to-sharpen wood from sustainably managed forests. The graphite lead is high-quality and robust, with high breaking strength. The 10H grade is a special hardness that Pica also uses for the stonemason leads of its BIG Dry automatic pencil. Which surfaces it marks Pica lists brick, stone, concrete and wood as suitable. In its earlier product sheet the manufacturer rates the pencil as ideal for stone and concrete and acceptable on processed and raw wood and on metal. For wood Pica has a separate carpenter pencil - the Classic 540. The product sheet lists the pencil for building and underground construction. What 541/30-100 means At Pica the designation 541/30-100 stands for a display box of 100 pencils of the Classic 541 in 30 cm, while 541/30-10 is a hangable box of 10. The pencil is also made in 24 cm - articles 541/24-100 and 541/24-10. The shop price is for 1 pencil. Sharpening and carrying For sharpening thick wooden pencils Pica recommends the Jumbo 560-12 sharpener, and for carrying and sharpening in one the Pica Pocket holster with built-in blade, which according to the manufacturer suits thick wooden pencils of all kinds. As an alternative to the wooden pencil Pica also offers BIG Dry - a carpenter pencil with automatic lead feed at the push of a button, for which there are 10H stonemason leads (6055). Technical specifications ManufacturerPica-Marker Article541/30-100 RangePica Classic 541 TypeStonemason pencil Length30 cm Cross-sectionOval Lead hardness10H BodyEasy-to-sharpen wood; green SurfacesBrick, stone, concrete, wood Manufacturer's packDisplay box of 100 pencils Quantity1 pencil Questions and Answers What is the lead hardness? The lead is in the special hardness 10H. The manufacturer describes it as high-quality, robust and with high breaking strength. Which materials is the pencil suited to? Pica lists brick, stone, concrete and wood. According to the manufacturer it works best on stone and concrete. What does 541/30-100 mean? It is Pica's designation for a display box of 100 Classic 541 pencils in 30 cm. The shop price is for 1 pencil. Is there a shorter version? Yes, Pica also makes the Classic 541 in 24 cm - in a display box of 100 (541/24-100) and in a box of 10 (541/24-10). What should I sharpen the pencil with? Pica recommends the Jumbo 560-12 sharpener, made for thick wooden pencils and crayons. Another option is the Pica Pocket holster with built-in blade. What shape is the pencil? The pencil has an oval cross-section, and the body is made of easy-to-sharpen wood from sustainably managed forests. Is it suitable for marking wood? Pica lists wood as a suitable surface, but its earlier product sheet rates the result on wood as acceptable. For wood the manufacturer has a separate carpenter pencil, the Classic 540. ..

Pica BIG Dry Stonemason Refill Leads, Graphite 10H, 12 pcs - 6055 Pica 6055 is a pack of 12 stonemason leads in the special hardness 10H for the Pica BIG Dry automatic construction pencil. The manufacturer intends them for stone and concrete - for dry, rough brickwork and concrete surfaces. 10H graphite These are standard graphite refills in the special hardness 10H. On the pack Pica describes them as extremely hard and sturdy and extra long - 150 mm. The cross-section is rectangular, 2 x 5 mm, as with the other BIG Dry leads, so they fit the same pencil. Pack The twelve leads come in a sturdy plastic box with two opening wings, which keeps the spare leads safe until they are needed. The box carries the article number 6055, the barcode and the words Pica Germany, and the description is in German, English, French and Dutch. The manufacturer also offers the same leads on a 6055/SB blister card. The Pica BIG Dry pencil Pica BIG Dry is a carpenter pencil with automatic lead feed at the push of a button, which the manufacturer presents as its world premiere. The leads in the box are meant for refilling or exchange, and in its product sheet Pica lists the stonemason leads for building and underground construction. Surfaces In its product sheet Pica rates the stonemason leads as ideal for stone and concrete and acceptable on processed and dry raw wood. For wood the manufacturer offers separate carpenter leads 2H (6050), and for almost all materials the universal FOR ALL 2B leads (6030), which are water-soluble. Technical specifications ManufacturerPica-Marker Article6055 RangePica BIG Dry TypeStonemason refill leads CompatibilityPica BIG Dry Hardness10H Profile2 x 5 mm Length150 mm Quantity12 Intended forStone and concrete, dry and rough brickwork EAN4260056155390 PackPlastic box with two wings Questions and Answers Which pencil are the leads for? The leads are for the Pica BIG Dry automatic construction pencil, which uses rectangular 2 x 5 mm leads. What is the lead hardness? The leads are in the special hardness 10H. On the pack the manufacturer describes them as extremely hard and sturdy. Which materials are they suited to? Pica intends them for stone and concrete - for dry and rough brickwork. On processed and dry raw wood the result is acceptable according to the manufacturer. How many leads are there and what size are they? The box holds 12 leads with a 2 x 5 mm profile and a length of 150 mm. Are they suitable for marking wood? According to Pica the result on wood is only acceptable. For wood the manufacturer offers the carpenter leads 2H (6050). How do they differ from the universal FOR ALL leads? FOR ALL 2B leads (6030) are water-soluble and made for almost all materials. The 10H stonemason leads are much harder and intended for stone and concrete. How are the spare leads stored? The leads come in a sturdy plastic box with two opening wings, which keeps them until they are needed. ..

STROXX Tap and Drill Set with Wrench, M3-M12, 15 Pieces, 500-962 STROXX 500-962 is a set for cutting internal metric threads from M3 to M12 that includes not only the taps but also the seven matching tapping drills and a tap wrench. Article number 500-962, EAN 5707436091194. What is in the case The set holds 15 pieces: seven single-pass taps - M3, M4, M5, M6, M8, M10 and M12; seven HSS twist drills - 2.5, 3.3, 4.2, 5.0, 6.8, 8.5 and 10.2 mm; and one tap wrench covering the whole M3-M12 range. Everything sits in a plastic case with a labelled slot for each tool. Taps M3, M4, M5, M6, M8, M10, M12 - 7 pcs HSS drills 2.5 / 3.3 / 4.2 / 5.0 / 6.8 / 8.5 / 10.2 mm - 7 pcs Tap wrench for M3-M12 - 1 pc Plastic case with fitted slots Single-pass taps, DIN 352 form B Traditional hand tapping needs three taps per size - taper, second and plug. Here each size is a single tap that cuts a finished thread in one pass. That is possible because of the 4-5 thread lead with a spiral point grind (form B to DIN 352), which pushes the chip forward, ahead of the tap. Which is why it is a through-hole set That long lead and forward chip ejection are exactly what makes these taps a through-hole tool. In a blind hole the chip has nowhere to go and the thread cannot be taken to the bottom - that job needs a spiral-flute tap that pulls the chip back out. The drills are part of the system, not an extra The tapping drill diameter decides whether the finished thread will carry load. These seven drills are precisely the core-hole sizes for coarse metric threads to DIN 13: 2.5 mm for M3, 3.3 mm for M4, 4.2 mm for M5, 5.0 mm for M6, 6.8 mm for M8, 8.5 mm for M10 and 10.2 mm for M12. No table to look up and no size to get wrong. Material and applications The taps are ground HSS-G and are rated for hand and machine use. The set suits repair and assembly work in structural steel, cast iron, aluminium, brass and plastics - cutting new threads, and repairing or chasing existing ones. Hardened and stainless steels call for cobalt taps and are outside what this set is built for. Technical specifications ManufacturerSTROXX Article number500-962 EAN5707436091194 TypeTap and drill set with wrench Thread rangeM3 - M12, metric ISO coarse (DIN 13) Taps7 pcs - M3, M4, M5, M6, M8, M10, M12 Tap typeSingle-pass, DIN 352 form B Tap materialHSS-G, ground Lead4-5 threads, spiral point grind Drills7 pcs HSS - 2.5 / 3.3 / 4.2 / 5.0 / 6.8 / 8.5 / 10.2 mm Tap wrench1 pc, M3-M12 Total pieces15 Hole typeThrough holes UseHand and machine PackagingPlastic case with fitted slots Questions and Answers Which threads does the set cut? Metric ISO coarse threads to DIN 13 in sizes M3, M4, M5, M6, M8, M10 and M12. Each of the seven sizes has one tap and its matching drill. Fine metric and imperial threads are not covered. Why are drills included? Because the tapping hole diameter decides whether the finished thread will hold load. The seven drills are exactly the core-hole sizes for the seven threads - 2.5 mm for M3 through to 10.2 mm for M12. That removes both the lookup table and the most common hand-tapping mistake. What does "single-pass tap" mean? That one tap cuts a finished thread in a single pass instead of working through a taper, second and plug tap. It is achieved with a longer lead - 4 to 5 threads - and a spiral point grind that pushes the chip forward. The job is noticeably quicker. Can I use it in blind holes? It is not designed for that. DIN 352 form B ejects the chip forward, ahead of the tap, and in a blind hole there is nowhere for it to go, so the thread cannot be taken to the bottom. Blind holes need a spiral-flute tap. Can the taps be used in a machine? Yes, they are rated for hand and machine use. Keep the speed low and use cutting oil when machine tapping. If the machine has no reverse, back the tap out by hand with the wrench supplied. Which materials can be tapped? Structural steel, cast iron, aluminium, brass and plastics - the everyday materials in repair and assembly work. Hardened and stainless steels load an HSS tap to the point of breakage and call for a cobalt series, which this set does not contain. Is cutting oil necessary? Yes, in every metal. Oil cuts friction and heat, carries the chip out and multiplies tap life. Without it the risk of seizing and snapping a tap inside the hole rises sharply, and extracting a broken tap costs far more than the oil. ..

• Made of high-quality hardened steel • Cutting edges are precision-machined and hand-sharpened • Dual-material, comfortable handle • All surfaces are machine-finished and then polishedBrand: Stanley Model: STHT0-74363 Series: Stanley Weight: 0.17 kg..