Black Friday - Page 25

Stanley 1-69-100 Stud Crimping Pliers for Drywall Profiles Stanley 1-69-100 is a hand tool for permanently joining metal drywall profiles without screws or rivets. The joint is made with a single squeeze by cold-folding the sheet metal. How the joint works The jaws punch through both profiles and fold the cut tabs into one another, producing a cold mechanical lock. The metal is deformed rather than pierced and clamped, so the joint does not work loose under vibration, and there is no screw head protruding above the profile to stop the board sitting flat. Why not screws This is the main practical benefit. Self-tapping screws need separate driving, they protrude, and when boarding you have to think about where they land. Crimping is faster, needs no consumable and leaves a flat surface. Building partitions and suspended ceilings, the difference in pace shows up in the first room. Capacity The pliers work with sheet up to 0.8 mm per profile and U-sections up to 1.2 mm total thickness. That covers the standard CD, UD, CW and UW profiles used in drylining. When a screw is still the better choice Crimping is permanent, and that is an advantage until something has to come apart. For temporary structures, for alignment that may still change, and in places the jaws cannot reach - a profile pressed tight against a wall, for instance - a screw remains the only option. In practice the two methods complement each other: crimping takes the great majority of joints and screws cover the exceptions. One-handed operation The lever ratio is sized so that punching and folding happen one-handed with moderate effort. That matters when the other hand is holding the profile in place - which, working overhead, it almost always is. The handles carry non-slip vinyl grips with stops that keep the hand from sliding towards the jaws. Who it is for The tool is aimed at drylining installers building suspended ceilings and partition walls. It has a hanging ring for a belt, which is practical on a ladder or scaffold - the pliers are used every half metre of profile, and returning them to the bag each time is wasted movement. Technical specifications Order number1-69-100 TypeStud crimping pliers PrincipleCold folding, no screws or rivets Sheet thicknessup to 0.8 mm per profile U-shaped profilesup to 1.2 mm total thickness OperationOne-handed ConstructionSteel HandlesNon-slip vinyl with stops HangingBelt ring Applications Building plasterboard partition walls Suspended ceilings and CD/UD profile frames Joining CW and UW profiles Lining and drylining in refurbishment Questions and Answers How does the joint hold without a screw? The jaws punch through both profiles and fold the cut tabs into each other, producing a cold mechanical lock. The joint is permanent and does not work loose under vibration, since there is no thread to undo. What sheet thickness does it take? Up to 0.8 mm per profile, and with U-sections the combined thickness can reach 1.2 mm. That covers the standard drylining profiles - CD, UD, CW and UW. Thicker sheet calls for a different joining method. Why is it better than driving screws? Three reasons: it is faster - one squeeze against driving a screw; it needs no consumable, so you do not run out of screws halfway through a floor; and it leaves a flat surface, so the board sits true with no screw head propping it up. Can it be used one-handed? Yes, the lever ratio is sized for exactly that. The other hand stays free to hold the profile - which, working overhead and aligning verticals, is effectively essential. Can the joint be taken apart? Not in any normal way - which is why it is called permanent. The tabs are folded irreversibly and separating them usually deforms the profile. In practice that means alignment must be checked before the squeeze, not after. Does it need a consumable? No. The joint is made from the profiles' own material - no screws, rivets or clips to buy and carry. On a larger job that is part of the saving, on top of the time. Does it need maintenance? Little. The joints and moving parts take a drop of machine oil now and then, and the jaws want clearing of metal swarf. The main thing is not to use the tool on material thicker than intended - that is what bends the jaws. ..

For cutting cold-rolled steel sheet up to 1.2 mm thick or stainless steel up to 0.7 mm thick. Cutting blades made of forged chromium-molybdenum steel for strength, durability, and longevity. Serrated cutting blades ensure a secure grip and prevent the material from slipping during operation. Locking mechanism for easy one-handed operation. Non-adjustable screws prevent the blades from loosening. Color-coded, slip-resistant two-component handles for comfort and control. Meets or exceeds ANSI standards. Lifetime warranty.Length, mm: 275.00 mm Cutting capacity: 1.2 mm Brand: Stanley Material: chrome-molybdenum steel Model: 2-14-563 Application: for sheet metal Series: FatMax Weight: 0.41 kg..

Designed for one-handed use. Ideal for finishing work and smoothing the edges of laminate flooring. Made of cast alloy, metallic gray. Includes a screw for quick blade replacement. Assembled with a replaceable fine-tooth blade (5-1/2"/140 mm). Use replaceable blade 21-291.Length, mm: 153.00 mm Brand: Stanley Material: metal Model: 5-21-399 Application: for drywall Series: Stanley Weight: 0.18 kg Width, mm: 140.00 mm..

STANLEY FATMAX 1-92-980 Folding Metal Sawhorse, 1135 kg The STANLEY FATMAX 1-92-980 is a folding metal sawhorse with telescopic, height-adjustable legs. The manufacturer publishes the article as a pack of two (Piece Count 2) and states a load capacity of up to 1135 kg when used as a pair. Independently adjustable legs Each leg extends and locks on its own. That matters on uneven ground - on site, on a staircase or over loose terrain - where an ordinary sawhorse sits crooked and throws the workpiece off. Working height is levelled in seconds, with no packing pieces. Folding and transport The sawhorse folds in seconds to 69 x 11 x 83.1 cm closed and takes up very little room in a boot or in the corner of a workshop. Opened, it measures 690 mm wide and 395 mm deep. Manufacturer's stated weight is 12.3 kg. Holding and stability The top carries a lengthwise groove that stops beams, battens and pipes rolling while being cut. Lower down the legs there is a shelf for tools and small parts, and anti-slip rubber feet keep the sawhorse where it is put on a smooth floor. Applications Two of these make a makeshift bench for cutting timber, cladding, plasterboard and panels. They also serve as a support when fitting doors and window frames, when painting boards, and for staging material temporarily on site. Where it sits against plastic sawhorses The difference from lighter plastic sawhorses is in the legs: here they are metal and telescopic, which raises both the load rating and the ability to level up. That makes the 1-92-980 the heavier, dearer option in the range - bought when the work is regular, on site and over uneven ground, rather than occasional on a flat workshop floor. Note on pack contents STANLEY publishes article 1-92-980 as a set of two sawhorses, and the stated 1135 kg capacity applies to the two used together. Technical specifications Article1-92-980 RangeSTANLEY FATMAX TypeFolding sawhorse Pieces in the manufacturer's pack2 Load capacity (for the pair)1135 kg Height adjustmentIndependent telescopic per leg Folded dimensions (W x D x H)69 x 11 x 83.1 cm Open width690 mm Open depth395 mm Leg materialMetal (telescopic) Worktop materialPlastic Material grooveYes Tool shelfYes Anti-slip feetRubber Weight12.3 kg EAN3253561929809 Questions and Answers How much load does it take? STANLEY states a capacity of up to 1135 kg, and that figure applies to two sawhorses used together. It is a rating for material spread evenly across the pair, not for a concentrated point load. Is the height adjustable? Yes. Each leg is telescopic and locks independently of the others. That lets the sawhorse stand level on uneven ground or on a step, without packing boards or wedges underneath. Does it fold for transport? Yes, it folds in seconds. Closed it measures 69 x 11 x 83.1 cm, small enough to go in a car boot or hang on a workshop wall. Is there anywhere to put tools? Yes. A shelf sits low down between the legs and takes hand tools, screws and small parts so they are not hunted for on the floor during work. Does it stop a beam rolling? The top has a lengthwise groove that beams, battens and pipes drop into. The groove limits rotation while cutting and is particularly useful with round sections. What is it made of? The legs are metal and telescopic, with anti-slip rubber feet, while the top working section is plastic. The manufacturer's stated weight is 12.3 kg. How many pieces are in the manufacturer's article? STANLEY publishes 1-92-980 as a set of two sawhorses (Piece Count 2). ..

Stanley Tape MeasureDescription: The Stanley FatMax 10m tape measure is made of high-quality materials, making it very durable and wear-resistant. The tape features a special coating that prevents scratching and reduces wear on the markings. The first 20 cm of the tape are reinforced to prevent bending and breaking at the most vulnerable part of the tape measure. It is equipped with a safety mechanism that protects the tape when it is pulled out and keeps it taut, making it easier to use when the operator is working alone. Measurement units are printed on both sides of the tape for easy reading, even in awkward positions. Ergonomically designed two-piece casing that fits comfortably in your hand. Features a locking mechanism and a belt clip for easy storage. Technical specifications:Tape length: 10 mTape width: 33 mmHousing material: Bi-materialLocking mechanism: YesStandard: EC Class IIPrinting: Double-sidedHook type: Multi-CatchDimensions (H x W x D): 20 cm x 12 cm x 6 cmWeight: 0.693 kg..

Stanley FATMAX BladeArmor Magnetic Tape Measure, 8 m x 32 mm A tape measure from the FATMAX range with an 8 metre blade 32 mm wide. The hook is magnetic and grips steel by itself, and the blade is accuracy class II - a tolerance of ±0.5 mm per metre. Standout of 4.2 metres Standout is 4.2 m. That is the length over which the extended blade holds itself horizontally without folding down. Measuring across a room or along a ceiling, this figure decides whether you can work alone or need a second person to hold the end. BladeArmor and the blade coating The first 7.5 cm of the blade are reinforced with BladeArmor - exactly the section that is pulled out and retracted on every measurement and the first to tear. The rest of the blade carries an abrasion-resistant polyester film for which Stanley states up to 10 times the wear resistance of a standard lacquered blade. The hook The hook is Tru-Zero - it slides by exactly its own thickness, so zero stays true for both inside and outside measurements. The design is multi-catch: it grabs an edge from above, below and the side rather than only from below. The magnet is detachable, so it can be removed when it is in the way. Applications Drywall, carpentry, steel structure and HVAC work, where the magnetic hook latches onto a stud or a duct and frees a hand. Weight is 0.45 kg, with a built-in belt clip. What is in the delivery 1 x Stanley FATMAX BladeArmor magnetic tape measure, 8 m x 32 mm The manufacturer gives a 2 year limited warranty. Technical specifications Article numberFMHT0-33868 RangeFATMAX BladeArmor Blade length8 m Blade width32 mm Accuracy classclass II (±0.5 mm per metre) Standout4.2 m Blade coatingabrasion-resistant polyester film BladeArmor reinforcementfirst 7.5 cm HookTru-Zero, multi-catch Magnetic hookyes, detachable Belt clipyes Weight0.45 kg Warranty2 year limited Questions and Answers What does a 4.2 m standout mean? That is how much blade can be extended horizontally before it folds down under its own weight. Measuring across a room or along a ceiling, it decides how far you can reach alone without a second person at the end. What is accuracy class II? The European accuracy category for measuring tapes. Class II allows a deviation of up to ±0.5 mm per metre. For construction and installation work this is the usual class. Does the magnet come off? Yes, the magnetic hook is detachable. The magnet helps on steel studs and ducting but gets in the way when working near swarf or sensitive electronics. What is BladeArmor? Reinforcement of the first 7.5 cm of the blade - the section that moves on every measurement and tears first. The rest of the blade carries an abrasion-resistant polyester film. Why does the hook move? It is a Tru-Zero hook. The play equals exactly the thickness of the hook itself, so on an outside measurement it is pushed out and on an inside one pulled in, keeping zero true either way. A moving hook is not a fault. How wide is the blade and why does it matter? 32 mm. A wider blade holds itself horizontally for longer before folding - which is why the standout on this tape is 4.2 m. Is there a belt clip? Yes, the clip is built into the case. The tape weighs 0.45 kg. ..

Product DescriptionThe STANLEY FATMAX Auto-Lock XTHT0-33503 professional tape measure is designed for accurate measuring in construction, installation, renovation, and finishing applications. Featuring a 5 m measuring tape with a width of 32 mm, it provides excellent scale visibility and convenient handling for everyday professional use.The innovative Auto-Lock mechanism automatically holds the tape in the selected position, preventing uncontrolled retraction. This provides better control and makes measuring easier, including when working alone.The tape features a durable Mylar® coating, offering up to 10 times greater abrasion resistance compared with standard lacquered tapes. The additional BladeArmor® protection reinforces the first approximately 8 cm of the tape, the area most susceptible to wear.The wide 32 mm blade provides excellent readability and allows a horizontal standout of up to approximately 3 m without additional support. The removable magnetic hook makes it easier to attach the tape to metal surfaces, while the TRU-ZERO® design compensates for hook thickness to ensure accurate internal and external measurements.The ergonomic, two-component housing with a rubberized coating ensures a comfortable, secure grip. An integrated belt clip allows convenient carrying and quick access to the tool while working.Key Features and BenefitsAuto-Lock mechanism for secure tape positioning.Wide 32 mm blade for improved visibility and easy reading.Mylar® coating for enhanced wear resistance.BladeArmor® protection in the most vulnerable area of the tape.Removable magnetic hook for convenient measuring on metal surfaces.TRU-ZERO® design for accurate internal and external measurements.Rubberized housing for comfort and a secure grip.Belt clip for convenient carrying and easy access.ApplicationsSuitable for professional builders, installers, carpenters, furniture makers, technicians, and DIY users. Ideal for measuring in construction, structural installation, furniture manufacturing, renovation projects, and interior finishing work...

STANLEY FATMAX® Autolock Tape Measure, 8 m x 32 mm, XTHT0-33504DescriptionThe STANLEY FATMAX® Autolock XTHT0-33504 is a professional tape measure featuring an 8 m / 26 ft blade with a width of 32 mm, designed for accurate measurements in construction, installation, maintenance and workshop applications. The Autolock mechanism automatically holds the blade in position when extended, providing convenient control during measurements. Pressing the release button allows the blade to retract smoothly into the housing. The first 7.5 cm of the blade is reinforced with BladeArmor® coating, providing increased resistance to wear in the area subjected to the greatest stress during everyday use. STANLEY specifies a horizontal reach of up to 4.9 m, helping users perform longer measurements without the blade buckling. The tape measure features a durable housing with a rubberised grip for improved handling and jobsite durability. The Tru-Zero™ hook supports accurate internal and external measurements.Technical Specifications Brand: STANLEY Series: FATMAX® Model: XTHT0-33504 Type: Autolock tape measure Blade length: 8 m / 26 ft Blade width: 32 mm Locking mechanism: Autolock Horizontal reach: Up to 4.9 m Blade protection: BladeArmor® Reinforced blade area: First 7.5 cm Hook: Tru-Zero™ Housing: Durable rubberised construction Belt clip: Yes Package Includes 1 x STANLEY FATMAX® Autolock Tape Measure, 8 m x 32 mm, XTHT0-33504..

Gedore Stanley FMMT82683-1Description:Stanley FMMT82683-1 socket set, including 42 pieces with a 1/4" ratchet and 120 teeth, which provides exceptional precision and smooth rotation with just a 3° turn-the ideal solution for working in tight spaces. The set features alarge quick-release button that makes changing sockets easy, as well as a bi-material ergonomic handle for a secure grip and comfort during prolonged use. The bits are next-generation, featuring grooves for easy gripping, a narrow shank for access in tight spaces, and a Maxidrive profile that ensures maximum contact between the bit and the screw. Clearly marked sizes allow for quick identification, and the sturdy design guarantees reliability even in demanding work conditions. This versatile and durable Stanley FatMax set is the perfect choice for professionals and DIYers looking for efficiency, precision, and long tool life.Technical Specifications:Chuck: 1/4"Material: steelNumber of ratchet teeth: 120Number in set: 42 pcsThe set contains:1x Ratchet13x Sockets: 4 - 4.5 - 5 - 5.5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 mm2x Extenders: 3" - 6"2x 1/4" Adapters1x Bit holder1x 1/4" T-Handle22x Bits: PZ1-PZ2-PZ3 - PH1-PH2-PH3 - HEX3-4-5-6-7 - Torx10-15-20-25-27-30-40 - SLOTTED4-5-6-7..

Stanley STHT0-51309 Hammer The Stanley STHT0-51309 formwork hammer features a fiberglass handle for greater strength and durability. Polished head. Vibration-absorbing system. Durable logo on the handle. Reinforced connection between the head and the handle using two-component epoxy resin adhesive. Ergonomic, non-slip handle (made of two materials). Specially magnetized hole for holding nails. Technical specifications:Type: HammerWeight: 0.45 kgSize: 16 ozHandle material: fiberglassItem material: magnetized metal..

Stanley 1-20-110 Hand SawDescription: The Stanley 1-20-110 fine-tooth hacksaw is a high-performance hacksaw measuring 305 mm , featuring a sturdy blade and frame that ensure high efficiency and durability. The blade has 24 teeth per inch and is easy to replace and tension. It can be set in two different positions-90° and 45° -on the bi-material frame. The ergonomic frame and handle are made of two materials, providing superior comfort and grip during use. The saw has a cutting capacity of up to 110 mm , making it suitable for various materials and applications. Tensioning and adjusting the blade is easy thanks to the tensioning wheel, which ensures a secure blade hold and precise results. The blade is locked and unlocked using a patented lever, which ensures safety and security during operation. The saw's frame is made of sturdy steel, ensuring the tool's long life and durability. Technical specifications:Blade length: 305 mmTeeth per inch: 24Angles: 90° and 45°Cutting capacity: 110 mmDimensions: 17.40 x 39.80 x 2.90 cmWeight: 0.7 kg..

STANLEY 0-10-421 Craft KnifeDescription: The STANLEY 0-10-421 metal utility knife is distinguished by its high quality and functionality. Its zinc-plated metal body ensures exceptional strength and durability, which are necessary for intensive use in various conditions. The blade's self-locking mechanism allows for easy length adjustment, providing flexibility during use, while the blade lock ensures stability and safe operation. The ribbed surface of the knife body prevents slipping, providing a better grip and control during use. The integrated tool for safe and convenient breaking off of the blade segments makes blade replacement quick and easy, without the need for additional tools. The included convenient belt clip allows for easy carrying of the knife, keeping it close to your hand for quick access. Technical specifications:Type: MetalMaterial: AluminumBlade width: 18 mmDimensions: 20.5 x 8 x 8 cmWeight: 0.13 kg..

STANLEY 8-10-421 Craft KnifeDescription: The STANLEY 8-10-421 craft knife is a tool that stands out for its exceptional durability and functionality. The knife's metal body features an ergonomic design that ensures comfort during use and reduces hand fatigue during prolonged work. The belt clip allows for easy carrying and access to the knife. Cutting depth adjustment is simple, ensuring high-precision and efficient cutting of various materials. It comes with a blade, ensuring it is ready for use immediately. Technical Specifications:Type: MetalLength: 160 mmBlade width: 18 mmWeight: 0.14 kg..

The Giraffe Stanley SFMEE500S is suitable for sanding large surfaces. It is equipped with a powerful 750W motor and a speed of up to 1,700 RPM. Adjustable speed and soft-start function. Dust extraction system with adapters for connecting to a vacuum cleaner. The handle can be folded for more convenient transport and storage. 360° LED work light for more precise work. Comes with a carrying case, dust collection hose, and adapters. Telescopic handle, extends up to 1.8 m Specifications: Brand: Stanley Model: SFMEE500S Cable length: 3 m Power: 750 W No-load speed: 600-1,700 rpm Grinding disc diameter: 225 mm Length: 1.25-1.8 m Weight: 3.75 kg Warranty: 2 years ..

Stanley Stainless Steel Knife, 92 mm Blade, with Sheath, 0-10-232 Stanley 0-10-232 is a fixed-blade utility knife with a 92 mm blade in stainless steel. It comes with a sheath and is rated for use even in salt water. Fixed blade versus folding A fixed-blade knife has one fundamental advantage: there is no pivot. The pivot is the weak point of every folding knife - dirt gets in, it loosens over time, and under side load the blade wobbles. A fixed blade is one piece with the handle and takes pressure that would fold a pocket knife onto your fingers. The stainless steel Choosing stainless over carbon steel is a deliberate trade-off. Carbon steel sharpens more easily and holds an edge slightly longer, but it rusts at the first contact with moisture. Stainless asks a little more care when sharpening but is unaffected by water, damp material and salt. That is exactly why the manufacturer specifically rates it for salt water: this is the knife for the boat, the harbour, fishing work, plumbing and anything in a wet environment, where an ordinary knife is covered in rust within a week. The sheath The knife ships with a sheath. On a fixed blade that is not an extra but a necessity: a bare blade cannot be carried in a bag or on a belt. The sheath also protects the blade itself from knocks against other tools - the tip is the first thing to break in a case full of metal. What it is for A 92 mm blade is the general-purpose length for a work knife: enough for rope, belting, insulation, gaskets, cardboard and sheeting, without being so long that fine work becomes awkward. The knife is a tool, not a lever - use it on materials, not as a screwdriver or pry bar, because side load snaps the tip. Technical specifications ManufacturerStanley Article number0-10-232 TypeFixed-blade utility knife Blade length92 mm Blade materialStainless steel ResistanceSuitable for salt water Supplied withSheath Questions and Answers How long is the blade? 92 mm - the general-purpose length for a work knife: enough for rope, belting and insulation without getting in the way on fine work. Why a fixed rather than folding blade? Because there is no pivot - the weak point of every folding knife. A fixed blade takes side load that would fold a pocket knife onto your fingers. Does it rust? No - the blade is stainless steel and the manufacturer rates it for use even in salt water. This is the knife for boats, harbours, plumbing and damp environments. Is a sheath included? Yes. On a fixed blade the sheath is a necessity, not an extra - it makes the knife carryable and protects the tip from knocks against other tools. Does it hold an edge like carbon steel? Carbon steel sharpens more easily and holds an edge slightly longer, but it rusts at the first contact with moisture. Stainless needs a little more care when sharpening but is unaffected by water and salt. Can I use it as a screwdriver or pry bar? No. Side load snaps the tip - the commonest way work knives end their life. The knife is for cutting materials. What materials does it cut? Rope, belting, insulation, gaskets, cardboard and sheeting - the everyday materials of installation and maintenance work. ..

STANLEY STHT0-51310 Curve-Claw Hammer, 560 g head The STANLEY STHT0-51310 is a framing hammer with a curved claw and a 560 g (20 oz) head on a fibreglass-core handle. The manufacturer classifies it among framing hammers and specifies a longer handle for more force at the same effort. High-carbon steel head The head is forged from high-carbon steel. The striking face is smooth and round, with a tempered rim - the rim of the face is exactly where hammers most often chip on an off-square blow, which is why it is heat treated. Fibreglass-core handle The core is fibreglass, which gives strength at lower weight and absorbs part of the vibration instead of the wrist doing so. The joint between head and handle is reinforced with a two-component epoxy adhesive. Handle length is 319.4 mm. Ergonomic grip The grip is bi-material, with a ribbed surface and a flared end that stops the hand sliding off on a hard swing. The balance is set so the head's momentum does the work and the wrist tires more slowly over a long day. Curved claw The curved claw gives a longer lever arm when drawing nails - the back of the head bears on the board and the nail comes out with less effort. It is the classic shape for framing and carpentry work. Dimensions and standard Overall length is 325 mm, width 135 mm, and the weight of the complete tool is 0.785 kg. The manufacturer states conformity with ASME B107.400. The same model is also offered in a 16 oz version. Technical specifications ArticleSTHT0-51310 TypeCurve-claw framing hammer Head weight560 g (20 oz) Head materialForged high-carbon steel Striking faceSmooth, round, tempered rim Handle materialFibreglass core Head-to-handle jointTwo-component epoxy adhesive Handle length319.4 mm GripBi-material, ribbed, flared end Overall length325 mm Width135 mm Tool weight0.785 kg StandardASME B107.400 Other version16 oz EAN3253560513108 Questions and Answers How heavy is the head? The head is 560 g, which is 20 oz in imperial terms. The complete tool with the handle weighs 0.785 kg according to the manufacturer. Why a fibreglass handle? A fibreglass core gives strength at lower weight and absorbs part of the shock, instead of it reaching the wrist. The joint with the head is reinforced with a two-component epoxy adhesive. What is the difference between a curved and a straight claw? A curved claw gives a longer lever arm when drawing nails - the back of the head bears on the board and the nail comes out with less effort. A straight claw suits ripping and prying better. Why is the rim of the face tempered? The rim of the striking face is where hammers most often chip on an off-square blow. Heat treating the rim reduces the risk of that chipping. How long is the handle? The handle is 319.4 mm and the overall length of the hammer is 325 mm. A longer handle increases the force of the blow for the same effort from the user. Does it slip out of the hand? The grip is bi-material with a ribbed surface and a flared end. The flare at the end of the handle exists precisely to stop the hand sliding off on a hard swing. Is there a lighter version? Yes. The manufacturer states that the model is also offered in 16 oz. The lighter head suits finer work, while 20 oz is used for framing and larger nails. ..

STANLEY STHT0-73930 Socket Set, 1/4", 3/8", 1/2", 80 PiecesDescriptionThe STANLEY STHT0-73930 is a comprehensive 80-piece socket and tool set designed for workshop, automotive, maintenance, repair, and assembly applications. It covers all three common drive sizes - 1/4", 3/8", and 1/2" - providing excellent versatility for working with different fasteners. The set features three 43-tooth ratchets, chrome-finished sockets for improved rust resistance, screwdriver bits, hex keys, extensions, and additional accessories. All components are organised in a durable carrying case for convenient storage and transportation.Technical Specifications Brand: STANLEY Model / Part Number: STHT0-73930 Type: Socket and tool set Number of pieces: 80 Drive sizes: 1/4", 3/8", 1/2" Ratchets: 3 Ratchet mechanism: 43 teeth Socket finish: Chrome, rust-resistant Standard: ASME Product weight: 3.734 kg Storage: Durable carrying case Package Includes 1 x 1/4" ratchet 1 x 3/8" ratchet 1 x 1/2" ratchet Sockets in various sizes Screwdriver and hex bits Hex/Allen keys Extensions and adapters Additional accessories 1 x Durable storage case 80 pieces total..

STANLEY STHT47110-0 Aluminium Chalk Reel, 30 m The STANLEY STHT47110-0 is a chalk reel with a cast aluminium casing, a 30 m line and a 1:1 gear ratio. The tool snaps straight lines quickly and accurately onto a floor, wall, ceiling or board - cheaper and faster than any alternative over long distances. 1:1 gear ratio At 1:1, one turn of the crank arm retracts the line by one turn of the spool. That is the slow but most controlled rewind: the line lays in evenly and does not twist, unlike fast 3:1 and 6:1 ratios where speed is paid for with less even spooling. Patented anti-clump spool The spool uses a patented design against chalk build-up and jamming. That is exactly the weak point of cheap chalk reels: chalk packs around the line, the spool seizes and the tool is finished. A sliding door allows quick, clean refilling without mess. Capacity is 30 g of chalk. Casing and line The casing is cast aluminium - more durable than plastic when dropped and in hard environments. The line is 0.7 mm twisted poly, which holds chalk and resists wear. Overall dimensions are 130 x 80 x 40 mm at a weight of 167 g. Hook, plumb bob and storage The hook is a single prong with nail centring, so it grips an edge securely or seats on a nail. The bottom doubles as a plumb bob, which saves a second tool when setting out verticals. The hook nests in a dock on top and the crank arm locks away, so nothing snags in the bag. Applications Used in bricklaying, flooring, drywall, roofing and board cutting - anywhere a long straight line is needed. The manufacturer states that the model is also available as a kit with chalk refill and level under article STHT47111-0. Technical specifications ArticleSTHT47110-0 TypeChalk reel Line length30 m Gear ratio1:1 Casing materialCast aluminium Reel housing materialAluminium LineTwisted poly, 0.7 mm Chalk capacity30 g RefillingSliding door SpoolPatented anti-clump / anti-jam design HookSingle prong with nail centring Plumb bobYes, the bottom doubles as a plumb bob Hook storageTop hook dock Crank arm lockYes Dimensions (L x W x H)130 x 80 x 40 mm Weight167 g Kit with chalk and levelSTHT47111-0 EAN3253560471101 Questions and Answers What does a 1:1 gear ratio mean? One turn of the crank arm retracts the line by one turn of the spool. The rewind is slower than with 3:1 or 6:1, but more controlled - the line lays in evenly and does not twist. How much chalk does it hold? Capacity is 30 g. Refilling is through a sliding door that allows topping up on the spot without mess, rather than taking the casing apart. Can it be used as a plumb bob? Yes. The bottom of the casing is shaped to work as a plumb bob. That saves a second tool when a vertical has to be dropped from a point. Why an aluminium casing rather than plastic? Cast aluminium survives drops and hard environments better than plastic. On formwork and scaffolding that is the difference between a tool that lasts the season and one that cracks on the first fall. Does the spool jam? The spool has a patented design against chalk build-up and jamming - the classic failure on cheap chalk reels, where chalk packs around the line and seizes the mechanism. What line does it use? The line is twisted poly, 0.7 mm diameter and 30 m long. The twist holds chalk better than a smooth line and gives a crisper snapped line. Is there a version with chalk included? Yes. The manufacturer states that the model is also offered as a kit with a chalk refill and a level under article STHT47111-0. ..

Gedore Stanley STMT82672-0Description: Stanley STMT82672-0 socket set, containing 37 pieces , organized in a convenient and sturdy case for easy storage and transport. The set includes a ratchet, various sockets, bits, a holder, and an extension , providing everything needed for work on cars, machinery, and home repairs. Each piece is made of high-quality steel , ensuring durability, precision, and a long service life . The set is suitable for both professional and DIY use , providing reliability and convenience for every task. Technical specifications:Drive: 1/4"Material: steelNumber of pieces in the set: 37The set includes:1/4" ratchetSockets: 4, 4.5, 5, 6, 7, 8, 9, 10, 11, 12, 13, and 14 mmBits: PZ1, PZ2, PZ3, PH1, PH2, and PH3; hex 3, 4, 5, 6, and 7; Torx 10, 15, 20, 25, 27, 30, and 40; Slot 4, 5, 6, and 71/4" bit holder3" extension..

For cutting cold-rolled steel sheet up to 1.2 mm thick or stainless steel up to 0.7 mm thick. Cutting blades made of forged chromium-molybdenum steel for strength, durability, and longevity. Serrated cutting blades ensure a secure grip and prevent the material from slipping during operation. Locking mechanism for easy one-handed operation. Non-adjustable screws prevent the blades from loosening. Color-coded, slip-resistant two-component handles for comfort and control. Meets or exceeds ANSI standards. Lifetime warranty.Length, mm: 300.00 mm Cutting capacity: 1.2 mm Brand: Stanley Model: 2-14-566 Material: chrome-molybdenum steel Application: for sheet metal Series: Stanley Weight: 0.46 kg..