Black Friday - Page 21

Manufacturer: Milwaukee Model: 4932464575 Milwaukee accessory part number 4932464575 Description: Tested up to 10,000 volts and guaranteed up to 1,000 volts. Cold-tested down to -40 °C. Total length 160 mm. VDE (DIN EN/IEC 60900) certified tools. The steel blades are fully forged, hardened, and tempered for maximum durability. Precision-machined joint for maximum power transfer with optimal leverage for easy and effortless operation. Ergonomic soft-grip handle for comfortable operation and a secure grip. The gray titanium coating is non-reflective and ensures maximum corrosion resistance. Induction-hardened cutting edges to cut through even the hardest materials. The set includes: 1x - 4932464564 - 205 mm VDE long-nose pliers 1x - 4932464572 - 180 mm VDE combination pliers 1x - 4932464567 - 160 mm VDE diagonal cutter..

Milwaukee Pocket Tape Measure, 2 m x 13 mm, 4932501679 Milwaukee 4932501679 is a pocket tape measure, 2 m (6 ft) long with a 13 mm blade. The blade carries a dual scale - metric and imperial. What a pocket tape is for A two-metre tape does not replace a five-metre one - it solves a different problem. A large tape is heavy, bulky and stays in the bag; a small one lives in your pocket all day. And most real measurements are short: the width of a part, the spacing of two holes, the thickness of a board, the space for a box. That is exactly why a pocket tape gets used more often than the big one, despite measuring less. It is the tool that is on you the moment you need it, rather than the one you have to go back for. The 13 mm blade 13 mm is a narrow blade. Its standout - how much blade stays rigid in the air - is small, but over two metres that hardly matters: at that distance the blade rests on something or is held at the far end. A narrow blade does, however, make the case compact, which is the whole point of this type of tape. The dual scale The blade carries metric and imperial scales. That helps with imported material, pipe, fasteners and technical documentation, where sizes are often given in inches. Instead of converting in your head, you read directly. Hook and case The hook at the end of the blade slides by exactly its own thickness - a design many take for a defect but which is in fact compensation: measuring an internal dimension it pushes in, measuring an external one it pulls out, so zero stays true either way. The case is rubber overmoulded for grip and to absorb the impact of being dropped. Technical specifications ManufacturerMilwaukee Article number4932501679 RangePocket Length2 m (6 ft) Blade width13 mm ScaleMetric and imperial CaseRubber overmoulded, compact Questions and Answers How long is it? 2 metres (6 ft) with a 13 mm blade - the pocket format that stays on you all day. Why buy a 2 m tape when I have a 5 m? Because most measurements are short - part width, hole spacing, space for a box. A pocket tape gets used more because it is on you the moment you need it. Does it have an imperial scale? Yes - the blade is dual scale. Useful with imported material, pipe and technical documentation where sizes are given in inches. The hook wobbles - is that a fault? No. It slides by exactly its own thickness as compensation: pushed in for internal measurements, pulled out for external ones, so zero is true either way. Why only a 13 mm blade? A narrow blade keeps the case compact - the whole point of a pocket tape. Over 2 m, limited standout is not a problem. Will it survive being dropped? The case is rubber overmoulded - the rubber gives grip and absorbs impact, which on a tool carried in a pocket happens regularly. Is it accurate enough for precision work? For normal installation accuracy, yes. Engineering tolerances call for a caliper: every tape has play in the hook and in the blade's coil. ..

Milwaukee Protective Boot for M18 FUEL 1/2" Impact Wrench, 49162767 Milwaukee article number 49162767 is a protective rubber boot for the M18 FUEL 1/2" high-torque impact wrench. The boot wraps the tool's housing and protects both the tool and the surface it is set down on. Protection in both directions Its job is not only to look after the machine. A high-torque impact wrench is a heavy tool with a hard housing, and set down on a bonnet, a painted wheel or a finished floor it leaves a mark. A rubber boot answers both cases: it absorbs the impact if the tool is dropped and will not scratch what it rests on. Resistance to aggressive fluids The material is durable rubber, chosen to withstand what is found in a maintenance environment - oils, fuels, brake fluid, antifreeze and degreasers. An ordinary plastic or fabric cover in that environment hardens, cracks and falls apart within months. That is exactly why this is rubber rather than something cheaper. Form-fitting design The boot is moulded to the housing of this specific model. That matters: a form-fitting cover adds minimal bulk and weight, so the tool still reaches into the same spaces and still fits in its case. Universal stretch-fabric covers do the opposite - they add girth precisely where an impact wrench is already bulky. The flexible material lets the boot be fitted and removed by hand, with no tools. Compatibility - check before ordering The boot is made for the M18 FUEL 1/2" high-torque impact wrench, which Milwaukee lists as 2767-20 and, in the ONE-KEY version, 2863-20. Protective boots are not universal - each is moulded to a particular housing. Check your machine's model before ordering; a boot from another model will either not fit or will block the ventilation slots. One important limitation The boot is not electrically insulating. The manufacturer states explicitly that it must not be used on or near live electrical circuits - the rubber here is mechanical and chemical protection, not dielectric. Fitting it to a different tool can cause the motor to overheat if the ventilation slots are covered, and can void that tool's warranty. Technical specifications ManufacturerMilwaukee Article number49162767 TypeProtective tool boot MaterialDurable rubber ColourBlack Intended forM18 FUEL 1/2" high-torque impact wrench (2767-20, 2863-20) ResistanceOils, fuels and aggressive fluids FittingBy hand, no tools required LimitationNot electrically insulating Questions and Answers Which tool is it for? The M18 FUEL 1/2" high-torque impact wrench, which Milwaukee lists as 2767-20 and 2863-20 (the ONE-KEY version). Check your machine's model before ordering. Is it universal? No. Protective boots are moulded to a specific housing. A boot from another model will either not fit or will block the ventilation slots - which leads to the motor overheating. Does it insulate against electricity? No. The manufacturer states explicitly that the boot must not be used on or near live circuits. The rubber here is mechanical and chemical protection, not dielectric. Will the tool still fit in its case with the boot on? The boot is form-fitting and adds minimal bulk and weight - which is exactly why it is moulded to the housing rather than being a universal stretch cover that adds noticeable girth. Does it resist oil and fuel? Yes - the material is chosen for maintenance environments and withstands oils, fuels and similar aggressive fluids. An ordinary plastic or fabric cover in that environment hardens and cracks within months. Is it easy to fit and remove? Yes - the material is flexible and the boot goes on and off by hand, with no tools. That lets you take it off for cleaning, or when the tool has to reach an especially tight space. Does it protect the surfaces I set the tool on? Yes, and that is half the point. A high-torque impact wrench is heavy with a hard housing - set down on a bonnet, a painted wheel or a finished floor it leaves a mark. The rubber boot prevents that. ..

Milwaukee 48540100 Rivet Gun TipsDescription: The Milwaukee 48540100 rivet gun tip set is a convenient and practical set designed for use with rivet guns. These tips are specially designed to ensure a secure grip and stability when setting rivets. With their retaining noses, they help keep the rivets in the tool, even when rotating or using the tool in different positions. The set includes tips that are compatible with M12TM riveters and are suitable for working with various rivet sizes: 2.4, 3.2, 4.0, and 4.8 mm. Technical specifications:Suitable for: M12TM (2.4, 3.2, 4.0, and 4.8 mm)Quantity per package: 4 pcs..

Milwaukee Roll Top Tool Backpack, 4939785319DescriptionMilwaukee 4939785319 is a practical Roll Top work backpack designed for storing and transporting tools, accessories and everyday jobsite equipment. The backpack is suitable for construction, workshop, service and mobile installation applications. The Roll Top design provides convenient access to the main storage compartment, while the roll-down upper section offers a practical closure system for everyday use. Its backpack configuration allows tools and accessories to be carried on the user's back, leaving both hands free when moving between work areas. This makes it a convenient alternative to a traditional hand-carried contractor tool bag. Technical Specifications Brand: Milwaukee Type: Tool backpack / work bag Design: Roll Top Carrying Style: Backpack Main Compartment: Yes Application: Storage and transportation of tools and accessories Category: Tool storage Package Includes 1 x Milwaukee Roll Top Tool Backpack, 4939785319..

Milwaukee 48005182 Reciprocating Saw Blade for Metal, 150 mm Improved tooth geometry for faster cutting speed and longer life. High-quality bimetal cutting teeth with 8% cobalt for maximum performance. Thin blade body with a thickness of 0.90 mm, optimized for maximum speed and flexibility. Technical specifications:Material: Bi-Met, Co;Blade length: 150 mm;Tooth pitch: 1.8 mm;Max. cutting capacity - aluminum: 3 - 10 mm;Max. cutting capacity in steel plate: 2.4 mm;Max. cutting capacity for metal pipe: 10-100 mm;Max. cutting capacity for non-ferrous metals: 3-10 mm;Quantity per package: 1 pc...

Milwaukee 4932478764 Safety Goggles (Tinted) The Milwaukee 4932478764 safety goggles are designed with anti-fog and scratch-resistant lenses. The scratch-resistant lenses protect your eyes on the job, no matter how demanding the task. They feature an integrated flexible bridge for added comfort. The tinted lenses protect your eyes whether you're working indoors or outdoors. The design is made of ultra-lightweight and comfortable plastic with a flexible nose bridge and comfortable frames, making the goggles suitable for extended wear. Technical specifications:Brand: Milwaukee;Material: plastic;Color: red/black;Lens type: tinted;Adjustable nose bridge: yes;Anti-scratch technology: yes;Anti-fog technology: yes;Certified product: EN166 and EN170 / EN172;Quantity per package: 1 pc.;Weight: 0.025 kg...

Brand: MILWAUKEECat. No.: MIWK-3707 / 4932471274The angle attachment is a useful tool for screwing or drilling in confined, hard-to-reach areas. Impact rating: suitable for use with the latest 18 V impact drivers, as well as cordless drivers up to 226 Nm and up to 3,600 rpm. Internal SHOCK ZONETM and advanced gear design for excellent power transmission and impact resistance. For all 1/4" screwdriving and drilling accessories. Very compact design: only 36 mm high and a true 90° angle, allowing access to tight spaces. Ergonomic rubber coating for safe and comfortable operation. The package includes the angle adapter and the following bits: 1 x PH2, 1 x PZ1, 2 x PZ2, 1 x PZ3, 1 x TX10, 1 x TX15, 1 x TX20, 1 x TX25, 1 x TX30...

Description:Shockwave MIWK-2314 / 4932430904 Impact Bit Set - 15 pcs. Magnetic case.Bits:PH1 - 1 pc. PH2 - 2 pcs. PZ1 - 1 pc. PZ2 - 2 pcs. PZ3 - 1 pc. TX10 - 1 pc. TX15 - 2 pcs. TX20 - 2 pcs. TX25 - 1 pc. TX30 - 1 pc. Dimensions: L (working length) = 15 mm, L = 25 mm. Magnetic bit holder - L 60 mm..

Milwaukee Splitting Axe 66 cm, 2700 g, 4932498629 Milwaukee article number 4932498629 is a splitting axe measuring 66 cm overall and weighing around 2.7 kg. The head is forged steel, the handle has a full metal core, and a sheath for the edge is included. A splitting axe, not a felling axe The difference between the two lies in the head geometry and it decides what the tool is good for. A felling axe has a thin wedge that cuts across the wood fibres. A splitting axe has a thicker, wedge-shaped profile that does less cutting and more forcing the round apart from the inside, separating it along the grain. That is why it looks blunter - deliberately so: a thin, keen wedge would bury itself in the round instead of splitting it. Forged head The head is forged rather than cast. Forging densifies the steel and aligns its grain to the shape of the part, giving higher resistance to cracking under impact. The edge is precision-bevelled - on a splitting axe it is not razor sharp, but it must be even along its whole length, or the axe veers to one side on impact. Handle with a metal core The handle has a full metal core that resists bending. The reason is specific, and anyone who has split firewood knows it: on an overstrike, the round hits not the head but the handle directly beneath it. On a wooden handle, that is the single most common way an axe is broken. A metal core absorbs the blow. Over it sits a rubber overmould that both keeps your hand from slipping and absorbs some of the shock. 66 cm - what that covers 66 cm is the middle size: long enough for a proper two-handed swing, but shorter and more manageable than a full-length 90 cm splitter. It suits firewood of ordinary diameter, work on a block, and situations where the axe has to be carried - longer models are awkward to transport. For knotty timber and very thick rounds, a longer handle delivers more momentum. Splitting safely Always split on a substantial block, never on the ground or on concrete - striking a hard surface damages the edge and ricochets are dangerous. Stand so that an overstrike sends the axe away from your legs. Wear eye protection: splitting throws splinters and bark. Store the axe with the sheath fitted - not only for safety but to stop the edge being nicked against other tools. Technical specifications ManufacturerMilwaukee Article number4932498629 TypeSplitting axe Overall length66 cm (660 mm) WeightApproximately 2,700 g HeadForged steel, precision-bevelled edge HandleFull metal core, bend resistant GripWear-resistant rubber overmould Supplied withSheath for the edge UseSplitting firewood Questions and Answers What is the difference between a splitting axe and a felling axe? A felling axe has a thin wedge and cuts across the grain. A splitting axe has a thicker wedge profile that forces the round apart along the grain. It looks blunter on purpose - a thin, keen wedge would bury itself instead of splitting. Why does the handle have a metal core? Because of overstrikes. On those, the round hits the handle just below the head - the most common way a wooden handle breaks. A metal core absorbs that blow, and it is the reason an axe like this lasts for years. What size of wood does it suit? 66 cm is the middle size - right for firewood of ordinary diameter and a two-handed swing. For knotty timber and very thick rounds a 90 cm handle carries more momentum, at the cost of being harder to carry. Is a sheath included? Yes - a sheath for the edge is supplied. Store the axe with it fitted, not only for safety but to keep the edge from being nicked against other tools. Does it need sharpening? A splitting axe is not kept razor sharp - what matters is that the edge is even along its length. A nicked or distorted edge makes the axe veer on impact; restore it with a file, not an abrasive wheel, which overheats and softens the steel. What should I split on? Always a substantial block - never the ground or concrete. Striking a hard surface damages the edge, and ricochets are dangerous. Stand so that an overstrike sends the axe away from your legs. Is eye protection necessary? Yes. Splitting throws splinters and bark, and with seasoned timber they leave at speed. Glasses are the minimum; gloves additionally reduce blisters and the chance of the handle slipping. ..

Milwaukee 48899372 Step Drill Bit for MetalDescription:The Milwaukee 48899372 tapered metal drill bit is made of HSS-Co (High-speed steel-Cobalt) steel and cobalt alloy, which ensures exceptional durability and a long service life. It features an aluminum chromium-nitride coating, which provides 10 times longer life compared to standard step drills. The two cutting edges are precision-ground for fast and smooth drilling. The special geometry of the tip and steps prevents jamming, snagging, and deformation of the drilled material. The drill bit's shank is triangular, preventing it from slipping in the drill chuck and ensuring maximum torque transfer. Laser-engraved markings ensure good visibility and aid in precise positioning. The drill bit features 10 diameter steps, allowing you to select the appropriate size for the specific task. When working, it is recommended to use a coolant, which keeps the drill bit in optimal condition and prevents overheating. Technical specifications:Material: HSS-CoShank type: triangular shankShank diameter: 8 mmDrill bit diameter: 4-20 mmLength: 62 mmWeight: 0.08 kg..

Manufacturer: Milwaukee Model: PACKOUT - 4932464086 Description: The Milwaukee PACKOUT Tote Toolbag is a brand-new system for transporting, organizing, and storing tools, featuring the new PACKOUT modular storage system. It is designed to give users the ability to swap and lock together a wide range of tool boxes, organizers, and storage units in a variety of configurations. Part of the PACKOUTTM modular storage system. 1680 ballistic fabric construction. Impact-resistant molded base. Durable fold-out handle. Dimensions: 250 x 500 x 320 mm..

Milwaukee 4932471723 Tool CaseThe Milwaukee 4932471723 tool case is part of the MILWAUKEETM PACKOUTTM modular storage system, made of impact-resistant polymers, with a capacity of 34 kg. It can be connected to other PACKOUTTM system components via integrated locking clips. With a weather-resistant IP65-rated housing, it protects tools and accessories from rain and other debris on the job site. It features quick-adjust dividers and an internal tray to keep equipment and tools organized. The portable tool box is easy to transport with a carrying handle and reinforced hinges. The PACKOUTTM Compact Tool Case allows you to customize the storage system for easy transport and organization of tools and accessories. Technical Specifications:Load capacity: 34 kg;Protection rating: IP65;Adjustable internal dividers;Removable tray on top of the case;Impact-resistant housing made of high-density HDPE plastic;Modular connectivity with all components in the PACKOUTTM range;Dimensions (LxWxH): 411 x 254 x 330 mm.Weight: 2.5 kg...

Milwaukee 4932478739 7-Piece Electrician's Screwdriver SetDescription: The Milwaukee 4932478739 Tri-Lobe VDE screwdriver set is made of high-quality materials, ensuring high durability and strength. Strongly magnetized tips for secure holding of fasteners. CNC -milled tips ensure a tight and precise fit on fasteners. Black phosphate coating for grip and corrosion resistance. A slim shank diameter allows for easy access to hard-to-reach areas, and a two-component soft grip ensures a secure, non-slip hold. Innovative 3 -sided anti-roll design for the screwdrivers. The set includes 6 screwdrivers, which are VDE -tested up to 10,000 V and rated for up to 1,000 V , as well as a phase tester. Technical specifications:Model: 4932478739Rating: 1000 VDEDimensions: (SL) 2.5x75, 3x100, 4x100 & 5.5x125 mm; (PH) PH1x80 & PH2 x 100 mmQuantity per package: 7 pcsSet includes:4 x SL2.5/SL3/SL4/SL5.5 screwdrivers2 x PH2 / PH2 screwdrivers1 x phase tester..

Milwaukee 4932493872 Universal Drill BitsDescription: The Milwaukee 4932493872 universal drill bit set is designed for use with impact drivers and drills. Made of tungsten carbide (TCT), these drill bits ensure reliable drilling in various materials, including concrete, brick, tile, aerated concrete blocks, thin metal, aluminum, soft to medium-hard ceramic tiles, all types of wood, and PVC. The set includes 8 pieces with diameters ranging from 4 to 10 mm and lengths from 100 to 120 mm . Technical specifications:Diameter: 4-10 mmDrive: 1/4'' hexMaterial: TCTApplications: concrete, bricks, roof tiles, aerated concrete blocks, thin metal, aluminum, ceramic tiles with soft to medium hardness, all types of wood, and PVCWeight: 0.3 kgSet includes:1 x ⌀ 4 x 100 mm1 x ⌀ 5 x 108 mm2 x ⌀ 5.5 x 108 mm1 x ⌀ 6 x 108 mm1 x ⌀ 7 x 108 mm1 x ⌀ 8 x 120 mm1 x ⌀ 10 x 120 mm..

Milwaukee Axe 4932498628Description: The Milwaukee 4932498628 wood-splitting axe is designed for efficient and controlled splitting, combining strength, balance, and comfort during use. With a length of 40 cm and a weight of approximately 1.1 kg, this model ensures optimal weight distribution for precise and powerful strikes without unnecessary strain. The full metal core and reinforced metal handle prevent bending and ensure high durability even with intensive use. The ergonomically shaped handle with a rubber coating provides a secure and stable grip, reducing slippage and fatigue during work. The precision-ground wedge-shaped blade is optimized for quick and easy splitting, making the axe a reliable tool for both professional and demanding home applications. Technical specifications:Application: for splitting wood;Length: 40 cmWeight: 1.1 kg..

Milwaukee Work Shirt 4932492983Description:The Milwaukee 4932492983 work shirt is designed for professional use and daily work in demanding environments. The model is size S and is made from a blend of 33% cotton and 67% polyester, which provides an optimal balance between comfort, durability, and good breathability during prolonged wear. The dropped-shoulder design is specifically engineered to provide greater freedom of movement, especially when working with tools or carrying backpacks and work equipment. The shirt is a practical solution for professionals seeking functional workwear that combines convenience, durability, and comfort throughout the workday.Technical specifications:Color: BlackSize: SMaterial: 33% cotton and 67% polyester..

Milwaukee Work T-Shirt 4932493064Description: The Milwaukee 4932493064 work T-shirt is lightweight and designed to keep you productive on the job site in hot weather. Made from 100% polyester with moisture-wicking technology that draws sweat away from the skin and evaporates it quickly. The multi-layered mesh fabric in critical areas-under the armpits, on the sides of the body, and on the back-provides excellent ventilation where it's needed most. The shirt offers UPF 50+ UV protection according to EN 13758-1, protecting the skin from harmful sun rays while working outdoors. Technical specifications:Color: BlackMaterial: PolyesterUV protection standard: EN 13758-1..

Milwaukee 4932492713 WrenchesDescription:The Milwaukee 4932492713 socket wrench set includes 7 pieces, featuring a high-quality chrome finish that provides excellent resistance to corrosion and rust. The rounded I-shaped handle is designed for a comfortable grip and allows for the transmission of greater torque, making it ideal for professional and home use.Technical specifications:Profile: socketSize: 6-18 mmMaterial: CrV (chromium-vanadium)Coating: chrome-platedNumber of pieces: 7Weight: 2.2 kgSet includes: - 6x7 mm socket wrench: 1 pc. - 8x9 mm socket wrench: 1 pc. - 10x11 mm socket wrench: 1 pc. - 12x13 mm socket wrench: 1 pc. - 14x15 mm socket wrench: 1 pc. - 16x17 mm socket wrench: 1 pc. - 18x19 mm socket wrench: 1 pc...

Manufacturer: Milwaukee Model: 48223721 Color: Yellow For use on concrete, black pipe, aluminum, PVC, steel and stainless steel, rubber, and tires. Dries in 10 seconds. Water- and UV-resistant markings. Valve action marker. Durable, acrylic-based marker for the most demanding environmental conditions: surface temperatures from -10° to +145°. Marks on dark surfaces where traditional markers would not be easily visible. Can be used on rough, dirty, and greasy surfaces. Permanent markers. Markings last up to 6 months. Metal barrel for durability on the construction site. Xylene-free ink. IMPORTANT: Shake the marker with the cap on. Remove the cap and gently pump it up and down until the ink flows into the tip...