Vermin - Page 4

Hawera Power Ceramics Drill Bit, 4 x 90 mm, 266443DescriptionThe Hawera Power Ceramics drill bit (Part No. 266443) is designed for precision drilling in ceramic materials, including ceramic tiles, porcelain tiles, and other hard ceramic surfaces. With a 4 mm diameter and 90 mm overall length, it delivers accurate, clean holes for installation and finishing work. Its specially engineered tip provides precise positioning while reducing the risk of slipping on smooth tile surfaces. The drill bit is designed to produce clean holes with minimal risk of cracking when used correctly. The Hawera Power Ceramics 266443 is an excellent choice for professionals and DIY users looking for a reliable ceramic drill bit with clearly specified dimensions and genuine Hawera quality.Technical Specifications Brand: Hawera Series: Power Ceramics Type: Ceramic drill bit Diameter: 4 mm Overall length: 90 mm Shank: Cylindrical Application: Ceramic tiles, porcelain, and other ceramic materials Package Includes 1 x Hawera Power Ceramics Drill Bit 4 x 90 mm..

Hawera Power LX Plus SDS-plus Concrete Drill Bit, 8 x 200/265 mm, 266599 Hawera 266599 is a hammer drill bit from the Power LX Plus range with an SDS-plus shank, 8 mm diameter, a working length of 200 mm and an overall length of 265 mm. It is made for rotary hammers running in hammer-and-rotation mode and is used in concrete, reinforced concrete, brick and stone. Eight millimetres is the classic size for an 8 mm anchor, and 200 mm of working length is enough to go through a brick wall or through insulation into the load-bearing substrate. Four-cutter head The carbide head carries four cutting edges. When the bit meets rebar, at least one edge is always in contact with the steel, so the bit keeps cutting instead of jamming and snapping. That is exactly where a conventional two-cutter bit fails in reinforced concrete, and why four-cutter heads have become the standard for load-bearing fixings. Centring tip and dust removal A sharp centring tip bites on first contact and guides the hole from the start, instead of letting the bit wander across the surface. The shape of the head combined with large, short flutes clears dust quickly, and the four-start helix keeps the removal even along the whole working length. Less dust in the hole means less friction, less heat and longer carbide life. SDS-plus shank The SDS-plus shank fits without a key and without tightening: push it into the chuck until it clicks. It lets the bit slide a few millimetres lengthwise, so the piston's blow reaches the tip directly rather than being absorbed by the chuck. The bit works in every rotary hammer with an SDS-plus chuck, whatever the brand, and is not intended for an ordinary percussion drill. A note on the length figures In Hawera's catalogue article 266599 is listed as 8 x 265 x 200 mm - 265 mm overall and 200 mm usable. The 65 mm difference is the SDS-plus shank together with the transition into the helix. Technical specifications ManufacturerHawera RangePower LX Plus Article266599 TypeHammer drill bit for concrete ShankSDS-plus Diameter8 mm Working length200 mm Overall length265 mm HeadCarbide, four cutting edges HelixFour-start, large short flutes Suitable materialsConcrete, reinforced concrete, brick, stone ApplicationRotary hammers with SDS-plus chuck EAN3165140945998 Pack quantity1 piece Questions and Answers Which anchor size does this diameter suit? An 8 mm diameter matches an 8 mm nylon or metal anchor - the most common size for hanging cabinets, brackets, radiators and shelving in concrete and solid brick. Clear the dust out of the hole before setting the anchor, otherwise its holding capacity drops. How deep a hole can I drill? The working length is 200 mm, so that is the maximum hole depth. The 265 mm overall length includes the SDS-plus shank and the transition into the helix, which stay outside the material. Will it fit my rotary hammer? Yes, if the chuck is SDS-plus. The shank pushes in until it clicks, with no key and no tightening. The bit is not intended for an ordinary percussion drill with a three-jaw chuck and does not fit an SDS-max chuck. Will it cut through rebar? Yes. The head has four cutting edges, so when it meets rebar at least one edge is always in contact with the steel and the bit keeps cutting rather than jamming. With a long run of rebar, reduce the pressure and where possible avoid the main reinforcement. Can I run it in hammer-only mode? No. This is a drill bit, not a chisel. Hammer-only mode is for chisels and points. The bit works only in hammer-and-rotation mode, otherwise the carbide head breaks. How does it differ from a two-cutter bit? A two-cutter bit has only two cutting edges, and when one of them hits rebar the bit jams and snaps easily. A four-cutter head spreads the blow across more edges, runs more steadily in reinforced concrete and leaves a more accurate hole. Does it need lubrication or cooling? No. Drilling in concrete is done dry. What matters is clearing the hole - pull the bit out a few times during the job, because accumulated dust increases friction and overheats the carbide. ..

Hawera power LX plus Concrete Drill Bit, SDS-plus, Ø12 x 165 x 100 mm Hawera 266615 is a hammer drill bit for concrete with an SDS-plus shank. Diameter is Ø12 mm, overall length 165 mm and working (useful) length 100 mm. EAN 3165140946155. About the photograph Hawera publishes one image for the whole size range; it carries no etched size and does not show the exact proportions of this particular length. The figures are what count: this article is Ø12 x 165 x 100 mm. The two lengths are not the same thing Read the figures like this: 165 mm is the whole bit, 100 mm is the flute - how deep it can actually drill. The 65 mm difference is the SDS-plus shank sitting in the chuck. Choose depth by the working length, never the overall - that is the commonest reason a bit turns out too short. The SDS-plus shank SDS-plus is the standard for light and medium rotary hammers - a shank with two closed and two open grooves. The bit pushes into the chuck and locks itself, no key. This shank does not fit an ordinary drill; that needs a round-shank bit. Hawera and Bosch Hawera is DREBO's accessory brand, distributed across Europe through Bosch's channels - which is why the EANs begin 3165140. The power LX plus range is the middle class: tougher than the basic line, without the price of four-cutter rebar bits. What it is and is not for It works in concrete, brick, stone and block. It is not for rebar - a two-cutter bit dulls or jams on steel, and that job wants four-cutter geometry. Nor for tile: the hammer action cracks the glaze. Making it last Withdraw the bit several times while drilling so the dust escapes - dust packed between flute and wall is what overheats the tip. Work without leaning on it: the hammer does the striking, you only steer. Heavy pressure does not speed the hole, it wears the carbide. Technical specifications ManufacturerHawera (DREBO) Article266615 Rangepower LX plus ShankSDS-plus DiameterØ12 mm Overall length165 mm Working length100 mm MaterialsConcrete, brick, stone, block Not forRebar, ceramic, tile EAN3165140946155 Questions and Answers What exactly is the size? Ø12 x 165 x 100 mm - diameter, overall length, working length. What is the difference between the two lengths? 165 mm is the whole bit; 100 mm is the flute, the real drilling depth. Which machine does it fit? A rotary hammer with an SDS-plus chuck. It does not fit an ordinary drill. Will it go through rebar? No. This is a two-cutter bit and steel dulls it. Rebar needs four-cutter geometry. Is it suitable for tiles? No. The hammer action cracks the glaze; tiles have their own non-percussion range. Is the photo of this exact size? Hawera publishes one image for the whole range, with no etched size. The figures in the description are what count. How do I make it last? Withdraw it several times so the dust escapes, and do not press hard - the hammer strikes, you only steer. ..

Hawera power LX plus Concrete Drill Bit, SDS-plus, Ø8 x 115 x 50 mm Hawera 266596 is a hammer drill bit for concrete with an SDS-plus shank. Diameter is Ø8 mm, overall length 115 mm and working (useful) length 50 mm. EAN 3165140945967. About the photograph Hawera publishes one image for the whole size range; it carries no etched size and does not show the exact proportions of this particular length. The figures are what count: this article is Ø8 x 115 x 50 mm. The two lengths are not the same thing Read the figures like this: 115 mm is the whole bit, 50 mm is the flute - how deep it can actually drill. The 65 mm difference is the SDS-plus shank sitting in the chuck. Choose depth by the working length, never the overall - that is the commonest reason a bit turns out too short. The SDS-plus shank SDS-plus is the standard for light and medium rotary hammers - a shank with two closed and two open grooves. The bit pushes into the chuck and locks itself, no key. This shank does not fit an ordinary drill; that needs a round-shank bit. Hawera and Bosch Hawera is DREBO's accessory brand, distributed across Europe through Bosch's channels - which is why the EANs begin 3165140. The power LX plus range is the middle class: tougher than the basic line, without the price of four-cutter rebar bits. What it is and is not for It works in concrete, brick, stone and block. It is not for rebar - a two-cutter bit dulls or jams on steel, and that job wants four-cutter geometry. Nor for tile: the hammer action cracks the glaze. Making it last Withdraw the bit several times while drilling so the dust escapes - dust packed between flute and wall is what overheats the tip. Work without leaning on it: the hammer does the striking, you only steer. Heavy pressure does not speed the hole, it wears the carbide. Technical specifications ManufacturerHawera (DREBO) Article266596 Rangepower LX plus ShankSDS-plus DiameterØ8 mm Overall length115 mm Working length50 mm MaterialsConcrete, brick, stone, block Not forRebar, ceramic, tile EAN3165140945967 Questions and Answers What exactly is the size? Ø8 x 115 x 50 mm - diameter, overall length, working length. What is the difference between the two lengths? 115 mm is the whole bit; 50 mm is the flute, the real drilling depth. Which machine does it fit? A rotary hammer with an SDS-plus chuck. It does not fit an ordinary drill. Will it go through rebar? No. This is a two-cutter bit and steel dulls it. Rebar needs four-cutter geometry. Is it suitable for tiles? No. The hammer action cracks the glaze; tiles have their own non-percussion range. Is the photo of this exact size? Hawera publishes one image for the whole range, with no etched size. The figures in the description are what count. How do I make it last? Withdraw it several times so the dust escapes, and do not press hard - the hammer strikes, you only steer. ..

BOSCH 2608576194 Concrete Drill BitDescription: The BOSCH 2608576194 concrete drill bit delivers long-lasting performance when drilling into concrete. Its solid carbide head with 4 cutting edges is made from the highest quality carbide, which reinforces the head and ensures exceptional impact resistance. The even distribution of drilling power ensures no loss of power, which increases the overall service life. This drill bit is designed for hammer drilling in masonry, concrete, and reinforced concrete. It is compatible with hammer drills featuring SDS plus chucks. Technical specifications:Outer diameter: 8 mmLength: 165 mmWorking length: 100 mmChuck: SDS-plusMaterial: HMCutting edges: 4 Packaging quantity: 1 pcApplication: for concrete and reinforced concrete ..

BOSCH 2608706847 Concrete Drill BitDescription:The BOSCH 2608706847 concrete drill bit, with a diameter of 14 mm, a length of 340 mm, and a working length of 200 mm, is designed for extremely demanding applications and ensures maximum efficiency when drilling into reinforced concrete. Thanks to BOSCH Carbide Technology, the drill bit features a tip made entirely of ultra-hard metal, which ensures superior wear resistance and a long service life, even during the most demanding tasks. The drill bit is equipped with a high-performance tip featuring four cutting edges, which not only increases drilling speed but also improves stability and precision. BOSCH welding technology ensures an exceptionally strong bond between the carbide head and the steel body of the drill bit, allowing for reliable operation during hammer drilling with impact drills, without the risk of loosening or breaking. The ideal choice for construction and installation professionals seeking reliability, durability, and high performance when drilling into reinforced concrete and other hard materials.Technical specifications:Outer diameter: 14 mmLength: 340 mmWorking length: 200 mmChuck: SDS-maxMaterial: HMCutting edges: 4Quantity per package: 1 pcApplication: for concrete and reinforced concrete..

BOSCH 2608900089 Concrete Drill BitDescription: The BOSCH 2608900089 concrete drill bit delivers long-lasting performance when drilling into concrete. Its solid carbide head with 4 cutting edges is made from the highest quality carbide, which reinforces the head and ensures exceptional impact resistance. The even distribution of drilling power ensures no loss of power, which increases the overall service life. This drill bit is designed for hammer drilling in masonry, concrete, and reinforced concrete. It is compatible with hammer drills featuring SDS plus chucks. Technical specifications:Outer diameter: 8 mmLength: 215 mmWorking length: 150 mmChuck: SDS-plusMaterial: HMCutting edges: 4 Application: for concrete and reinforced concrete Dimensions (L x W x H): 215 x 8 x 8 mm..

BOSCH 2608900262 Concrete Drill BitDescription:The BOSCH 2608900262 concrete drill bit, with a diameter of 16 mm, a length of 540 mm, and a working length of 400 mm, is designed for extremely demanding applications and ensures maximum efficiency when drilling into reinforced concrete. Thanks to BOSCH Carbide Technology, the drill bit features a tip made entirely of ultra-hard metal, which ensures superior wear resistance and a long service life, even during the most demanding tasks. The drill bit is equipped with a high-performance four-flute tip that not only increases drilling speed but also improves stability and precision. BOSCH welding technology ensures an exceptionally strong bond between the carbide head and the steel body of the drill bit, allowing for reliable operation during hammer drilling with impact drills, without the risk of loosening or breaking. The ideal choice for construction and installation professionals seeking reliability, durability, and high performance when drilling into reinforced concrete and other hard materials.Technical specifications:Outer diameter: 16 mmLength: 540 mmWorking length: 400 mmChuck: SDS-maxMaterial: HMCutting edges: 4Packaging quantity: 5 pcsApplication: for concrete and reinforced concreteDimensions (L x W x H): 540 x 16 x 16 mm..