Filter
Your Cart

Vermin - Page 3

Brand: Bosch Stock: In Stock
BOSCH PointTec HSS Metal Drill Bit Set, 2-8 mm, 6-piece setBOSCH PointTeQ HSS twist drills allow for fast drilling in metal thanks to the PointTeQ tip design. The increased drilling speed generates less heat and wear. The PointTeQ tip design stays sharp and ensures long-lasting durability. Low risk of breakage due to a highly elastic body with a black oxide coating. The drill bits are manufactured to DIN 338 Standard, Type N, 135-degree point. There is a low risk of breakage, especially for drill bits with a diameter under 6 mm, as the bit is manufactured to have a highly elastic body.Technical specifications:Brand: BOSCH;Diameter: 2.0 / 3.0 / 4.0 / 5.0 / 6.0 / 8.0 mm;Working length: 24 / 33 / 43 / 52 / 57 / 75 mm;Material: HSS-E;Standard: D338;Drill point: 135°;Application: Steel/ferrous metal, gray cast iron, alloyed/unalloyed steel;Characteristics: ground;Drill shank type: cylindrical;Drill bit color: silver;Quantity per package: 6 pcs...
6.61€
Ex Tax:5.51€
Add to Cart
Brand: Bosch Stock: In Stock
Bosch 2608900526 Adapter and Drill BitDescription: The Bosch PowerChangePlus HEX 11 adapter and drill bit is an innovative solution designed for maximum efficiency when changing drill bits. This adapter is equipped with a unique QUICK CHANGE system that allows for quick and easy attachment and removal of drill bits. This process is completed with a single click, saving time and effort during operation. The adapter can be used with a wide range of core bits with diameters from 14mm to 210 mm, ensuring compatibility with various sizes. It stands out from standard adapters by allowing use with both the largest and smallest core bits. Technical specifications:Brand: BOSCH;Drill bit diameter: 8.5 mm;Total drill length: 105 mm;Adapter diameter: 33.7 mmTotal adapter length: 80 mm;Shank: hexagonal shank;Application: brick, soft floor tiles, cast ironSuitable for: core bits with diameters from 14 mm to 210 mm..
33.49€
Ex Tax:27.91€
Add to Cart
Brand: Bosch Stock: In Stock
Bosch 2608900527 Adapter and Drill BitDescription: The Bosch PowerChangePlus HEX 11 adapter and drill bit is an innovative solution designed for maximum efficiency when changing core bits. This adapter is equipped with a unique QUICK CHANGE system that allows for quick and easy attachment and removal of core bits. This process is completed with a single click, saving time and effort during operation. The adapter can be used with a wide range of core bits with diameters from 14mm to 210 mm, ensuring compatibility with various sizes. It stands out from standard adapters by allowing use with both the largest and smallest core bits. Technical specifications:Brand: BOSCH;Drill bit diameter: 7.15 mm;Total drill length: 105 mm;Adapter diameter: 33.7 mmTotal adapter length: 80 mm;Shank: hexagonal shank;Application: metal pipes, profiles, plastic, wood with metalSuitable for: core bits with diameters from 14 mm to 210 mm..
29.78€
Ex Tax:24.82€
Add to Cart
Brand: Bosch Stock: In Stock
Bosch PRO HEX-5 Masonry Drill Bit, Ø10 x 150 mm, 2608706990 Bosch 2608706990 is a drill bit for concrete, stone and brick from the PRO HEX-5 range, 10 mm in diameter with a 100 mm working length and 150 mm overall. The shank is hexagonal. Bosch states up to twice the life of a CYL-3 drill bit. The hex shank This is what separates HEX-5 from ordinary masonry bits. Instead of a cylindrical shank, which spins in place in a three-jaw chuck under resistance, the shank here is hexagonal. The result is a strong connection and full torque transmission. More importantly, it changes where you can work: a hex shank also fits a 1/4" holder on an impact driver. That means drilling concrete with the machine already in your hand, instead of carrying a separate rotary hammer for a handful of holes. The tip The tip has a continuous carbide edge - the cutting plate runs across the whole tip rather than being made of separate segments. That is precisely what lets the bit survive impact mode, in which a segmented edge chips at the corners. The carbide composition is specially chosen for hard materials, and beneath the cutting edge sits a large opening that clears dust effectively. That second point matters more than it sounds: dust left in the hole gets ground over and over, heats the tip, and is the main reason masonry bits go blunt. How to use it The bit is for an impact drill, drill driver or impact driver. In hammer mode press steadily and along the axis - a masonry bit does not cut, it crushes the material, and excessive pressure only heats the tip. On a deep hole, withdraw the bit periodically to let the dust out. The 10 x 150 size Ø10 mm is the size for a 10 mm plug - the most-used fixing for brackets, shelves, radiators and sanitaryware. The 150 mm working length reaches through plaster into the structural substrate, and the 150 mm overall leaves enough for the chuck. Technical specifications ManufacturerBosch Article number2608706990 RangePRO HEX-5 Diameter10 mm Working length100 mm Total length150 mm ShankHexagonal TipContinuous carbide edge MaterialsConcrete, stone, brick For machinesImpact drills, drill drivers, impact drivers LifeUp to 2x a CYL-3 bit Questions and Answers Why a hex shank? For a strong connection and full torque transmission. A cylindrical shank spins in place in the chuck under resistance. A hex shank also fits a 1/4" holder on an impact driver. Can I drill with an impact driver? Yes - that is HEX-5's main point. The continuous carbide edge is built to withstand impact loading, where a segmented tip chips away. Does it fit a rotary hammer? Not directly - the shank is hexagonal, not SDS-plus. The bit is intended for impact drills and drivers; a rotary hammer needs SDS-shank bits. Which wall plug is Ø10 for? A 10 mm plug - the most-used size for brackets, shelves, radiators and sanitaryware. Why does the opening under the edge matter? Because it clears the dust. Dust left in the hole is ground over and over and heats the tip - the main reason masonry bits lose their edge. How deep a hole does it make? Working length is 150 mm out of 150 mm overall - enough to go through plaster into the structural substrate, with the remainder held in the chuck. How hard should I press? Steadily and along the axis. A masonry bit crushes rather than cuts - too much pressure only heats the tip. On a deep hole, withdraw the bit periodically to clear dust. ..
9.68€
Ex Tax:8.07€
Add to Cart
Brand: Bosch Stock: In Stock
Bosch PRO HEX-5 Masonry Drill Bit, Ø10 x 200 mm, 2608706991 Bosch 2608706991 is a drill bit for concrete, stone and brick from the PRO HEX-5 range, 10 mm in diameter with a 150 mm working length and 200 mm overall. The shank is hexagonal. Bosch states up to twice the life of a CYL-3 drill bit. The hex shank This is what separates HEX-5 from ordinary masonry bits. Instead of a cylindrical shank, which spins in place in a three-jaw chuck under resistance, the shank here is hexagonal. The result is a strong connection and full torque transmission. More importantly, it changes where you can work: a hex shank also fits a 1/4" holder on an impact driver. That means drilling concrete with the machine already in your hand, instead of carrying a separate rotary hammer for a handful of holes. The tip The tip has a continuous carbide edge - the cutting plate runs across the whole tip rather than being made of separate segments. That is precisely what lets the bit survive impact mode, in which a segmented edge chips at the corners. The carbide composition is specially chosen for hard materials, and beneath the cutting edge sits a large opening that clears dust effectively. That second point matters more than it sounds: dust left in the hole gets ground over and over, heats the tip, and is the main reason masonry bits go blunt. How to use it The bit is for an impact drill, drill driver or impact driver. In hammer mode press steadily and along the axis - a masonry bit does not cut, it crushes the material, and excessive pressure only heats the tip. On a deep hole, withdraw the bit periodically to let the dust out. The 10 x 200 size Ø10 mm is the size for a 10 mm wall plug - the most-used fixing for brackets, shelves, radiators and sanitaryware. The 150 mm working length reaches through plaster into the structural substrate, and the 200 mm overall leaves enough for the chuck. Technical specifications ManufacturerBosch Article number2608706991 RangePRO HEX-5 Diameter10 mm Working length150 mm Total length200 mm ShankHexagonal TipContinuous carbide edge MaterialsConcrete, stone, brick For machinesImpact drills, drill drivers, impact drivers LifeUp to 2x a CYL-3 bit Questions and Answers Why a hex shank? For a strong connection and full torque transmission. A cylindrical shank spins in place in the chuck under resistance. A hex shank also fits a 1/4" holder on an impact driver. Can I drill with an impact driver? Yes - that is HEX-5's main point. The continuous carbide edge is built to withstand impact loading, where a segmented tip chips away. Does it fit a rotary hammer? Not directly - the shank is hexagonal, not SDS-plus. The bit is intended for impact drills and drivers; a rotary hammer needs SDS-shank bits. Which wall plug is Ø10 for? A 10 mm plug - the most-used size for brackets, shelves, radiators and sanitaryware. Why does the opening under the edge matter? Because it clears the dust. Dust left in the hole is ground over and over and heats the tip - the main reason masonry bits lose their edge. How deep a hole does it make? Working length is 150 mm out of 200 mm overall - enough to go through plaster into the structural substrate, with the remainder held in the chuck. How hard should I press? Steadily and along the axis. A masonry bit crushes rather than cuts - too much pressure only heats the tip. On a deep hole, withdraw the bit periodically to clear dust. ..
11.92€
Ex Tax:9.93€
Add to Cart
Brand: Bosch Stock: In Stock
Bosch PRO HEX-5 Masonry Drill Bit, Ø5 x 100 mm, 2608706972 Bosch 2608706972 is a drill bit for concrete, stone and brick from the PRO HEX-5 range, 5 mm in diameter with a 50 mm working length and 100 mm overall. The shank is hexagonal. Bosch states up to twice the life of a CYL-3 drill bit. The hex shank This is what separates HEX-5 from ordinary masonry bits. Instead of a cylindrical shank, which spins in place in a three-jaw chuck under resistance, the shank here is hexagonal. The result is a strong connection and full torque transmission. More importantly, it changes where you can work: a hex shank also fits a 1/4" holder on an impact driver. That means drilling concrete with the machine already in your hand, instead of carrying a separate rotary hammer for a handful of holes. The tip The tip has a continuous carbide edge - the cutting plate runs across the whole tip rather than being made of separate segments. That is precisely what lets the bit survive impact mode, in which a segmented edge chips at the corners. The carbide composition is specially chosen for hard materials, and beneath the cutting edge sits a large opening that clears dust effectively. That second point matters more than it sounds: dust left in the hole gets ground over and over, heats the tip, and is the main reason masonry bits go blunt. How to use it The bit is for an impact drill, drill driver or impact driver. In hammer mode press steadily and along the axis - a masonry bit does not cut, it crushes the material, and excessive pressure only heats the tip. On a deep hole, withdraw the bit periodically to let the dust out. The 5 x 100 size Ø10 mm is the size for a 10 mm wall plug - the most-used fixing for brackets, shelves, radiators and sanitaryware. The 150 mm working length reaches through plaster into the structural substrate, and the 100 mm overall leaves enough for the chuck. Technical specifications ManufacturerBosch Article number2608706972 RangePRO HEX-5 Diameter5 mm Working length50 mm Total length100 mm ShankHexagonal TipContinuous carbide edge MaterialsConcrete, stone, brick For machinesImpact drills, drill drivers, impact drivers LifeUp to 2x a CYL-3 bit Questions and Answers Why a hex shank? For a strong connection and full torque transmission. A cylindrical shank spins in place in the chuck under resistance. A hex shank also fits a 1/4" holder on an impact driver. Can I drill with an impact driver? Yes - that is HEX-5's main point. The continuous carbide edge is built to withstand impact loading, where a segmented tip chips away. Does it fit a rotary hammer? Not directly - the shank is hexagonal, not SDS-plus. The bit is intended for impact drills and drivers; a rotary hammer needs SDS-shank bits. Which wall plug is Ø5 for? A 10 mm plug - the most-used size for brackets, shelves, radiators and sanitaryware. Why does the opening under the edge matter? Because it clears the dust. Dust left in the hole is ground over and over and heats the tip - the main reason masonry bits lose their edge. How deep a hole does it make? Working length is 150 mm out of 100 mm overall - enough to go through plaster into the structural substrate, with the remainder held in the chuck. How hard should I press? Steadily and along the axis. A masonry bit crushes rather than cuts - too much pressure only heats the tip. On a deep hole, withdraw the bit periodically to clear dust. ..
5.20€
Ex Tax:4.33€
Add to Cart
Brand: Bosch Stock: In Stock
Bosch PRO HEX-5 Masonry Drill Bit, Ø6 x 150 mm, 2608706977 Bosch 2608706977 is a drill bit for concrete, stone and brick from the PRO HEX-5 range, 6 mm in diameter with a 100 mm working length and 150 mm overall. The shank is hexagonal. Bosch states up to twice the life of a CYL-3 drill bit. The hex shank This is what separates HEX-5 from ordinary masonry bits. Instead of a cylindrical shank, which spins in place in a three-jaw chuck under resistance, the shank here is hexagonal. The result is a strong connection and full torque transmission. More importantly, it changes where you can work: a hex shank also fits a 1/4" holder on an impact driver. That means drilling concrete with the machine already in your hand, instead of carrying a separate rotary hammer for a handful of holes. The tip The tip has a continuous carbide edge - the cutting plate runs across the whole tip rather than being made of separate segments. That is precisely what lets the bit survive impact mode, in which a segmented edge chips at the corners. The carbide composition is specially chosen for hard materials, and beneath the cutting edge sits a large opening that clears dust effectively. That second point matters more than it sounds: dust left in the hole gets ground over and over, heats the tip, and is the main reason masonry bits go blunt. How to use it The bit is for an impact drill, drill driver or impact driver. In hammer mode press steadily and along the axis - a masonry bit does not cut, it crushes the material, and excessive pressure only heats the tip. On a deep hole, withdraw the bit periodically to let the dust out. The 6 x 150 size Ø6 mm is the size for a 6 mm plug - the most-used fixing for brackets, shelves, radiators and sanitaryware. The 150 mm working length reaches through plaster into the structural substrate, and the 150 mm overall leaves enough for the chuck. Technical specifications ManufacturerBosch Article number2608706977 RangePRO HEX-5 Diameter6 mm Working length100 mm Total length150 mm ShankHexagonal TipContinuous carbide edge MaterialsConcrete, stone, brick For machinesImpact drills, drill drivers, impact drivers LifeUp to 2x a CYL-3 bit Questions and Answers Why a hex shank? For a strong connection and full torque transmission. A cylindrical shank spins in place in the chuck under resistance. A hex shank also fits a 1/4" holder on an impact driver. Can I drill with an impact driver? Yes - that is HEX-5's main point. The continuous carbide edge is built to withstand impact loading, where a segmented tip chips away. Does it fit a rotary hammer? Not directly - the shank is hexagonal, not SDS-plus. The bit is intended for impact drills and drivers; a rotary hammer needs SDS-shank bits. Which wall plug is Ø6 for? A 10 mm plug - the most-used size for brackets, shelves, radiators and sanitaryware. Why does the opening under the edge matter? Because it clears the dust. Dust left in the hole is ground over and over and heats the tip - the main reason masonry bits lose their edge. How deep a hole does it make? Working length is 150 mm out of 150 mm overall - enough to go through plaster into the structural substrate, with the remainder held in the chuck. How hard should I press? Steadily and along the axis. A masonry bit crushes rather than cuts - too much pressure only heats the tip. On a deep hole, withdraw the bit periodically to clear dust. ..
7.22€
Ex Tax:6.02€
Add to Cart
Brand: Bosch Stock: In Stock
Bosch PRO HEX-5 Masonry Drill Bit, Ø8 x 150 mm, 2608706985 Bosch 2608706985 is a drill bit for concrete, stone and brick from the PRO HEX-5 range, 8 mm in diameter with a 100 mm working length and 150 mm overall. The shank is hexagonal. Bosch states up to twice the life of a CYL-3 drill bit. The hex shank This is what separates HEX-5 from ordinary masonry bits. Instead of a cylindrical shank, which spins in place in a three-jaw chuck under resistance, the shank here is hexagonal. The result is a strong connection and full torque transmission. More importantly, it changes where you can work: a hex shank also fits a 1/4" holder on an impact driver. That means drilling concrete with the machine already in your hand, instead of carrying a separate rotary hammer for a handful of holes. The tip The tip has a continuous carbide edge - the cutting plate runs across the whole tip rather than being made of separate segments. That is precisely what lets the bit survive impact mode, in which a segmented edge chips at the corners. The carbide composition is specially chosen for hard materials, and beneath the cutting edge sits a large opening that clears dust effectively. That second point matters more than it sounds: dust left in the hole gets ground over and over, heats the tip, and is the main reason masonry bits go blunt. How to use it The bit is for an impact drill, drill driver or impact driver. In hammer mode press steadily and along the axis - a masonry bit does not cut, it crushes the material, and excessive pressure only heats the tip. On a deep hole, withdraw the bit periodically to let the dust out. The 8 x 150 size Ø8 mm is the size for a 8 mm plug - the most-used fixing for brackets, shelves, radiators and sanitaryware. The 150 mm working length reaches through plaster into the structural substrate, and the 150 mm overall leaves enough for the chuck. Technical specifications ManufacturerBosch Article number2608706985 RangePRO HEX-5 Diameter8 mm Working length100 mm Total length150 mm ShankHexagonal TipContinuous carbide edge MaterialsConcrete, stone, brick For machinesImpact drills, drill drivers, impact drivers LifeUp to 2x a CYL-3 bit Questions and Answers Why a hex shank? For a strong connection and full torque transmission. A cylindrical shank spins in place in the chuck under resistance. A hex shank also fits a 1/4" holder on an impact driver. Can I drill with an impact driver? Yes - that is HEX-5's main point. The continuous carbide edge is built to withstand impact loading, where a segmented tip chips away. Does it fit a rotary hammer? Not directly - the shank is hexagonal, not SDS-plus. The bit is intended for impact drills and drivers; a rotary hammer needs SDS-shank bits. Which wall plug is Ø8 for? A 10 mm plug - the most-used size for brackets, shelves, radiators and sanitaryware. Why does the opening under the edge matter? Because it clears the dust. Dust left in the hole is ground over and over and heats the tip - the main reason masonry bits lose their edge. How deep a hole does it make? Working length is 150 mm out of 150 mm overall - enough to go through plaster into the structural substrate, with the remainder held in the chuck. How hard should I press? Steadily and along the axis. A masonry bit crushes rather than cuts - too much pressure only heats the tip. On a deep hole, withdraw the bit periodically to clear dust. ..
7.70€
Ex Tax:6.42€
Add to Cart
Brand: Bosch Stock: In Stock
Bosch PRO HEX-5 Masonry Drill Bit, Ø8 x 200 mm, 2608706986 Bosch 2608706986 is a drill bit for concrete, stone and brick from the PRO HEX-5 range, 8 mm in diameter with a 150 mm working length and 200 mm overall. The shank is hexagonal. Bosch states up to twice the life of a CYL-3 drill bit. The hex shank This is what separates HEX-5 from ordinary masonry bits. Instead of a cylindrical shank, which spins in place in a three-jaw chuck under resistance, the shank here is hexagonal. The result is a strong connection and full torque transmission. More importantly, it changes where you can work: a hex shank also fits a 1/4" holder on an impact driver. That means drilling concrete with the machine already in your hand, instead of carrying a separate rotary hammer for a handful of holes. The tip The tip has a continuous carbide edge - the cutting plate runs across the whole tip rather than being made of separate segments. That is precisely what lets the bit survive impact mode, in which a segmented edge chips at the corners. The carbide composition is specially chosen for hard materials, and beneath the cutting edge sits a large opening that clears dust effectively. That second point matters more than it sounds: dust left in the hole gets ground over and over, heats the tip, and is the main reason masonry bits go blunt. How to use it The bit is for an impact drill, drill driver or impact driver. In hammer mode press steadily and along the axis - a masonry bit does not cut, it crushes the material, and excessive pressure only heats the tip. On a deep hole, withdraw the bit periodically to let the dust out. The 8 x 200 size Ø8 mm is the size for a 8 mm plug - the most-used fixing for brackets, shelves, radiators and sanitaryware. The 150 mm working length sets the maximum hole depth, and the 200 mm overall includes the section held in the chuck. Technical specifications ManufacturerBosch Article number2608706986 RangePRO HEX-5 Diameter8 mm Working length150 mm Total length200 mm ShankHexagonal TipContinuous carbide edge MaterialsConcrete, stone, brick For machinesImpact drills, drill drivers, impact drivers LifeUp to 2x a CYL-3 bit Questions and Answers Why a hex shank? For a strong connection and full torque transmission. A cylindrical shank spins in place in the chuck under resistance. A hex shank also fits a 1/4" holder on an impact driver. Can I drill with an impact driver? Yes - that is HEX-5's main point. The continuous carbide edge is built to withstand impact loading, where a segmented tip chips away. Does it fit a rotary hammer? Not directly - the shank is hexagonal, not SDS-plus. The bit is intended for impact drills and drivers; a rotary hammer needs SDS-shank bits. Which wall plug is Ø8 for? A 10 mm plug - the most-used size for brackets, shelves, radiators and sanitaryware. Why does the opening under the edge matter? Because it clears the dust. Dust left in the hole is ground over and over and heats the tip - the main reason masonry bits lose their edge. How deep a hole does it make? Working length is 150 mm out of 200 mm overall - the remainder is held in the chuck. How hard should I press? Steadily and along the axis. A masonry bit crushes rather than cuts - too much pressure only heats the tip. On a deep hole, withdraw the bit periodically to clear dust. ..
9.48€
Ex Tax:7.90€
Add to Cart
Brand: Bosch Stock: In Stock
Bosch PRO Metal HSS-G Twist Drill Bit Set for Metal, DIN 338, Ø 1-10 mm, 19 pcs Bosch PRO Metal HSS-G (order number 2 608 587 013) is a set of 19 twist drill bits for metal covering 1.0 to 10.0 mm in 0.5 mm steps. The bits are made of ground high-speed steel to DIN 338, with a 135° point angle and a split point. The set comes in a plastic ProBox cassette measuring 172 x 115 x 42 mm with marked slots. A set for everyday metalwork: the whole ladder from 1 to 10 mm in one box. What it is for Bosch describes the bits as a choice for construction workers and installers. The materials the manufacturer lists are alloyed and unalloyed steel, non-ferrous metals, cast iron, plastics and wood - in practice almost everything drilled on site and in the workshop: sheet metal and profiles, angle iron, tubes, aluminium and brass parts, cast iron, PVC. The bits run in an ordinary drill or a cordless driver with a three-jaw chuck, with hammer action switched off. Hammer action is for concrete and masonry and chips the cutting edge of a metal bit. What the "G" in HSS-G means HSS stands for high-speed steel. The letter G (from the German geschliffen - ground) tells you how the flute was made: on HSS-G bits the flute and the cutting edges are ground out of solid stock, while on cheaper HSS-R bits the flute is rolled. A ground bit has more accurate point geometry and better concentricity - it runs rounder, bites cleaner and produces a hole closer to nominal size. Bosch puts it briefly: "Ground high-speed steel for strength and durability". The manufacturer also compares it within its own range: this article lasts up to 2x longer than a Bosch PointTeQ drill bit (the rolled HSS-R line of Bosch). That is Bosch's own comparison and refers to the life of the cutting edge, not to drilling speed. 135° split point The tip is a split point ground at 135°. The chisel edge in the centre is split, which does two things: the bit centres itself instead of wandering across the surface, and it needs less feed pressure to start cutting. Bosch describes it as a "split-point tip for starting holes exactly where you need them", with "no need for pilot holes". The difference shows on sloped or smooth surfaces - painted sheet metal, a tube, a finished part. An ordinary bit with a 118° point and a solid chisel edge walks off unless centre-punched first; with a 135° split point the punch mark is usually unnecessary. Shank and chuck The shank is cylindrical and its diameter equals the drill bit diameter - it is not reduced. That brings one practical limit: the 10 mm bit needs a chuck that opens to at least 10 mm. A 1.5-13 mm chuck takes it, 0.8-10 mm is right at the limit, and in a small 1-6.5 mm chuck the upper diameters will not fit. Because the shank is a plain cylinder, the bits work in a three-jaw chuck of any brand of machine - which is exactly why Bosch prints the Universal brand fit mark on the packaging. The diameters in the set The set holds 19 bits, one of each diameter, in 0.5 mm steps across the whole range. Below are the diameters with working and total lengths as published by Bosch: DiameterWorking lengthTotal length 1.0 mm12 mm34 mm 1.5 mm18 mm40 mm 2.0 mm24 mm49 mm 2.5 mm30 mm57 mm 3.0 mm33 mm61 mm 3.5 mm39 mm70 mm 4.0 mm43 mm75 mm 4.5 mm47 mm80 mm 5.0 mm52 mm86 mm 5.5 mm57 mm93 mm 6.0 mm57 mm93 mm 6.5 mm63 mm101 mm 7.0 mm69 mm109 mm 7.5 mm69 mm109 mm 8.0 mm75 mm117 mm 8.5 mm75 mm117 mm 9.0 mm81 mm125 mm 9.5 mm81 mm125 mm 10.0 mm87 mm133 mm The working length is the fluted part and sets the maximum material thickness for one pass: 87 mm with the 10 mm bit, 33 mm with the 3 mm one. The standard tapping drill sizes for metric coarse threads are 2.5 mm for M3, 3.3 for M4, 4.2 for M5, 5.0 for M6, 6.8 for M8 and 8.5 for M10. This set contains 2.5, 5.0 and 8.5 mm, so M3, M6 and M10 are covered; 3.3, 4.2 and 6.8 mm are missing because the step here is 0.5 mm. Technical specifications BrandBosch Professional LinePRO Metal HSS-G Order number2 608 587 013 EAN3165140689779 Typetwist drill bit set for metal Number of bits19 (one of each diameter) Diameters1.0 - 10.0 mm in 0.5 mm steps Materialground high-speed steel (HSS-G) StandardDIN 338 Point angle135° Tip grindsplit point, self-centring Shankcylindrical, diameter equal to the drill bit diameter Holderthree-jaw drill chuck Lengthsworking 12 - 87 mm, total 34 - 133 mm Drills inalloyed and unalloyed steel, non-ferrous metals, cast iron, plastics, wood Packagingplastic ProBox cassette, with Euro hole Cassette dimensions172 x 115 x 42 mm Weight with packagingapprox. 0.53 kg Operating moderotary drilling only - no hammer action What is in the set 19 Bosch PRO Metal HSS-G twist drill bits for metal, one of each diameter: 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 6.5, 7.0, 7.5, 8.0, 8.5, 9.0, 9.5 and 10.0 mm Plastic ProBox cassette 172 x 115 x 42 mm with marked ..
-19%
29.00€ 35.94€
Ex Tax:24.17€
Add to Cart
Brand: Bosch Stock: In Stock
Bosch PRO SDS plus-5X Hammer Drill Bit, 12 x 150 x 210 mm, 2608833906DescriptionBosch 2608833906 is a PRO SDS plus-5X hammer drill bit designed for efficient drilling in concrete and reinforced concrete. It has a 12 mm diameter, 150 mm working length and 210 mm overall length. The drill bit features a 4-cutter head geometry designed to reduce jamming when hitting reinforcement. Its centring tip provides accurate positioning when starting holes in concrete. The 4-flute design provides efficient dust removal, helping maintain drilling speed while reducing wear. The SDS-plus shank makes the bit suitable for compatible SDS-plus rotary hammers.Technical Specifications Brand: Bosch Professional Series: PRO SDS plus-5X Type: Hammer drill bit Diameter: 12 mm Working Length: 150 mm Overall Length: 210 mm Size: 12 x 150 x 210 mm Shank: SDS-plus Cutting Edges: 4 Suitable For: Concrete and reinforced concrete Centring Tip: Yes Flute Design: 4-flute Package Includes 1 x Bosch PRO SDS plus-5X Hammer Drill Bit, 12 x 150 x 210 mm, 2608833906..
6.90€
Ex Tax:5.75€
Add to Cart
Brand: Bosch Stock: In Stock
BOSCH SDS plus-1 Hammer Drill Bit for Concrete, 6 x 100 x 160 mm The BOSCH SDS plus-1 drill bit offers highly efficient drilling in reinforced concrete. The tungsten carbide plate with 2 cutting edges makes the drill bit exceptionally durable. The 2-channel U-shaped design ensures effective dust removal and standard service life. Technical specifications:Brand: BOSCH;Diameter: 6 mm;Working length: 100 mm;Overall length: 160 mm;Material: HM;Cutting edges: 2;Chuck: SDS-plus;Application: Concrete and masonry;Quantity per package: 1 pc.;Weight: 0.040 kg..
1.29€
Ex Tax:1.08€
Add to Cart
Brand: Bosch Stock: In Stock
Bosch SDS-max Pointed Chisel Set, 400 mm, 10 pcs., 2608690128 DescriptionThe Bosch 2608690128 is a professional set of 10 SDS-max pointed chisels, each with an overall length of 400 mm. Designed for standard chiselling in concrete and brick, the pointed tip concentrates impact energy for demolition and precise adjustment work. The SDS-max shank provides compatibility with SDS-max rotary hammers and breakers. The 10-piece pack is particularly suitable for professional construction, renovation, and demolition applications requiring a regular supply of chisels.Technical Specifications Brand: Bosch Professional Type: Pointed chisel Shank: SDS-max Total length: 400 mm Pack quantity: 10 pcs. Suitable materials: Concrete and brick Application: Chiselling and demolition Compatible tools: SDS-max rotary hammers and breakers Package Includes 10 x Bosch SDS-max Pointed Chisels, 400 mm..
-20%
10.21€ 12.76€
Ex Tax:8.51€
Add to Cart
Brand: Bosch Stock: Delivery in 1-3 days
Product Description11 HSS-TiN metal drill bits, 1.5-6.5 mm. 6 carbide drill bits for stone, 4-10 mm. 5 wood drill bits, 4-10 mm. 2 flat countersink bits, Titanium, O 16/22 mm. 18 bits L = 25 mm - PH 1/2/2/3, PZ 1/2/2/3;SL 4/6/7, HEX 3/4/5/6, T 15/20/25; 3 socket wrenches 7/8/10 mm. Socket wrench adapter, diameter gauge; knife; universal magnetic holder; 50-piece X-Line Titanium set..
24.31€
Ex Tax:20.26€
Add to Cart
Brand: Drebo Stock: In Stock
Hawera Power Ceramics Tile Drill Bit, Ø5 mm, Hex Shank, 266444 Hawera Power Ceramics 266444 is a ceramic drill bit of Ø5 mm with a carbide tip and a 1/4 inch hex shank. It is made for ceramic tile, wall tile, porcelain stoneware and other hard ceramic materials. Why ceramics need their own bit The glaze on a tile is harder and more brittle than the ceramic beneath it. An ordinary masonry bit has a wide, blunt tip - it does not cut the glaze but presses until it cracks, breaking a piece out around the hole. A ceramic bit has a sharp spear point that bites into the glaze from the first moment and cuts rather than shatters. No hammer This is the rule broken most often: in tile you work on rotation only. Hammer action applies to the glaze exactly the load it cannot take - the result is a star-shaped crack around the hole that shows for good. If the machine has no way to switch hammering off, use an ordinary drill. Starting the hole A smooth glaze is slippery and the bit wanders on first contact, leaving a scratch. The two reliable methods are tape over the spot to give grip, or starting at an angle and gradually righting the drill once the point has bitten. Cooling Ceramic carries no heat away. Drilling dry, the tip reaches a temperature at which carbide loses its hardness within seconds. Work at low speed, with light pressure and water or a wet sponge at the spot. A bit that has turned blue no longer cuts. The hex shank The shank is a 1/4 inch hex - the same fitting as a screwdriver bit. That lets the drill go into a quick-change holder or straight into a driver, rather than only a chuck. At Ø5 mm that is practical: swapping between drill and bit takes one movement. Porcelain stoneware is another matter In porcelain stoneware the material is dense right through rather than only at the surface. Drilling is slow for the whole depth and cooling matters more still - this is the material that eats the most bits. Technical specifications ManufacturerHawera Article number266444 RangePower Ceramics TypeCeramic drill bit Diameter5 mm TipCarbide, spear point Shank1/4 inch hex MaterialsCeramic tile, wall tile, porcelain stoneware ModeRotation only, no hammer Questions and Answers Which materials is it for? Ceramic tile, wall tile, porcelain stoneware and other hard ceramic materials. Should hammer action be used? No. Rotation only. Hammering makes a star-shaped crack around the hole that shows for good. What is the diameter? 5 mm, on a 1/4 inch hex shank. How do I stop the bit wandering on the glaze? Either tape over the spot for grip, or start at an angle and right the drill gradually once the point has bitten. Is cooling necessary? Yes. Ceramic carries no heat away - work at low speed, with light pressure and water or a wet sponge. A bit that has turned blue no longer cuts. Why a hex shank? A 1/4 inch hex is the screwdriver-bit fitting - the drill goes into a quick-change holder or straight into a driver, not only a chuck. Is porcelain stoneware harder? Yes. In porcelain stoneware the material is dense right through, drilling is slow for the whole depth and cooling matters more still. ..
-4%
3.87€ 4.05€
Ex Tax:3.23€
Add to Cart
Brand: Drebo Stock: In Stock
Hawera Power Ceramics Tile Drill Bit, Ø7 mm, Hex Shank, 266447 Hawera Power Ceramics 266447 is a ceramic drill bit of Ø7 mm with a carbide tip and a 1/4 inch hex shank. It is made for ceramic tile, wall tile, porcelain stoneware and other hard ceramic materials. Why ceramics need their own bit The glaze on a tile is harder and more brittle than the ceramic beneath it. An ordinary masonry bit has a wide, blunt tip - it does not cut the glaze but presses until it cracks, breaking a piece out around the hole. A ceramic bit has a sharp spear point that bites into the glaze from the first moment and cuts rather than shatters. No hammer This is the rule broken most often: in tile you work on rotation only. Hammer action applies to the glaze exactly the load it cannot take - the result is a star-shaped crack around the hole that shows for good. If the machine has no way to switch hammering off, use an ordinary drill. Starting the hole A smooth glaze is slippery and the bit wanders on first contact, leaving a scratch. The two reliable methods are tape over the spot to give grip, or starting at an angle and gradually righting the drill once the point has bitten. Cooling Ceramic carries no heat away. Drilling dry, the tip reaches a temperature at which carbide loses its hardness within seconds. Work at low speed, with light pressure and water or a wet sponge at the spot. A bit that has turned blue no longer cuts. The hex shank The shank is a 1/4 inch hex - the same fitting as a screwdriver bit. That lets the drill go into a quick-change holder or straight into a driver, rather than only a chuck. At Ø7 mm that is practical: swapping between drill and bit takes one movement. Porcelain stoneware is another matter In porcelain stoneware the material is dense right through rather than only at the surface. Drilling is slow for the whole depth and cooling matters more still - this is the material that eats the most bits. Technical specifications ManufacturerHawera Article number266447 RangePower Ceramics TypeCeramic drill bit Diameter7 mm TipCarbide, spear point Shank1/4 inch hex MaterialsCeramic tile, wall tile, porcelain stoneware ModeRotation only, no hammer Questions and Answers Which materials is it for? Ceramic tile, wall tile, porcelain stoneware and other hard ceramic materials. Should hammer action be used? No. Rotation only. Hammering makes a star-shaped crack around the hole that shows for good. What is the diameter? 7 mm, on a 1/4 inch hex shank. How do I stop the bit wandering on the glaze? Either tape over the spot for grip, or start at an angle and right the drill gradually once the point has bitten. Is cooling necessary? Yes. Ceramic carries no heat away - work at low speed, with light pressure and water or a wet sponge. A bit that has turned blue no longer cuts. Why a hex shank? A 1/4 inch hex is the screwdriver-bit fitting - the drill goes into a quick-change holder or straight into a driver, not only a chuck. Is porcelain stoneware harder? Yes. In porcelain stoneware the material is dense right through, drilling is slow for the whole depth and cooling matters more still. ..
-22%
5.30€ 6.80€
Ex Tax:4.42€
Add to Cart
Brand: Milwaukee Stock: In Stock
Milwaukee 4932502134 Tool SetDescription: The Milwaukee 4932502134 Christmas Set is the perfect way to make the holidays even more special for professional and DIY enthusiasts. It includes functional, high-quality tools that combine practicality and durability: Milwaukee 4932472091 20 cm aluminum level with impact- and UV-resistant vials, a milled base for high precision, and sturdy rubber end caps.Milwaukee 4932498783 5 m tape measure with 19 mm tape, impact-resistant housing, slim, comfortable design, and metal clip for easy carrying.Milwaukee 48223106 INKZALLTM Marker Set (4 pcs.) with durable tips, writes on dusty, wet, and greasy surfaces, quick-drying ink, and a convenient built-in clip.The Milwaukee 4932492454 folding knife features a resharpenable stainless steel blade, one-handed opening, a belt clip, a liner lock, a partially serrated blade, and built-in functions such as a can opener and a 1/4" bit holder.The Milwaukee 4932498174 Shockwave 14-in-1 set includes a screwdriver with 14 double-ended 1/4" bits stored in the handle, featuring laser marking and an ergonomic non-slip grip.Milwaukee tool case with a shock-resistant body and metal latches for maximum protection.The perfect set for practical gifts that combine reliability and functionality! Technical specifications:Length: 550 mmWidth: 300 mmHeight: 270 mmQuantity per package: 6 pcsWeight: 4.062 kg..
-33%
74.99€ 111.38€
Ex Tax:62.49€
Add to Cart
Brand: WERA Stock: In Stock
Wera 05136610001 Tool SetDescription: The Wera 05136610001 Christmas set is the perfect way to make the holidays even more special for professional and hobbyists alike. It includes functional, high-quality tools that combine practicality and durability. It contains 28 pieces arranged in different slots of the calendar, including 15 Kraftform series screwdrivers with a multi-component hexagonal handle that ensures strength and prevents rolling. The variety of screwdriver sizes-including Phillips and Pozidriv cross-head, TORX®, flat-head (including insulated), small stubby for hard-to-reach places, micro screwdrivers for precision mechanics, and a drill screwdriver with a striking surface and through-hole tip allow for effective work in any situation, while the insulated tools are individually tested for safe operation at voltages up to 1000 V. The set also includes holders, bits, and a bottle opener, which are indispensable items in a craftsman's toolkit. Technical specifications:Handle type: HexagonalSuitable for use at voltages: up to 1000 VQuantity per package: 28 pcsStandard: IEC 60900Dimensions: 570 x 460 x 50 mmSet includes:932 A flat-blade impact screwdriver: 1x 12 x 7 x 125 mmPhillips screwdrivers 350 PH:1x PH 1 x 80 mm 1x PH 2 x 100 mmStubby Phillips screwdriver 350 PH:1x PH 2 x 25 mmPhillips screwdrivers 355 PZ:1x PZ 1 x 80 mm1x PZ 2 x 100 mmTORX® screwdrivers 367:1x TX 15 x 80 mm1x TX 20 x 100 mm1x TX 25 x 100 mmStubby 335 flat (slotted) screwdriver:1x 1 x 5.5 x 24.5 mmMicro Phillips screwdriver for electronics 2050 PH:1x PH 0 x 60 mmMicro flat-blade (slotted) screwdrivers for electronics 2035:1x 0.30 x 2 x 60 mm1x 0.40 x 2.5 x 80 mmT-handle - 1/4" bit holder 9548:1x 1/4" x 93.6 mmHex socket bits 840/4 Z, 89 mm:05059631001 - 1x 4 x 89 mm05059632001 - 1x 5 x 89 mm050596330011) - 1x 6 x 89 mm 1) Hexagonal tipVDE 1060 i insulated flat (slotted) screwdrivers:05051580001 - 1x 0.4 x 2.5 x 80 mm05051582001 - 1x 0.6 x 3.5 x 100 mmHolder for screwdriver bits, shanks, long extensions, and angle wrenches with screw-holding function 1440:1x 4.5-6 x 41 mmHolder for screwdriver bits, shanks, long sockets, and angle wrenches with screw-holding function 1442:1x 6.0-8.5 x 41 mmUpper part A for screwdriver stand 9547:1x 212 x 67 x 30 mmTop section B for screwdriver stand 9545:1x 212 x 67 x 30 mmSide panel for screwdriver stand 9546:4x 18 x 67 x 126 mmBottle opener 1496:1x 148 mmhttps://www.tiktok.com/@toolsbox.bg/video/7582245272110026006 ..
-5%
79.00€ 83.34€
Ex Tax:65.83€
Add to Cart
Brand: Dewalt Stock: In Stock
DeWALT Circular Saw Blade, 165 x 20 mm, 24 Teeth, DT1209-QZDescriptionThe DeWALT DT1209-QZ is a 165 mm circular saw blade designed for fast and accurate cutting with handheld circular saws. Featuring a 20 mm bore and 24 carbide teeth, it delivers efficient cutting performance in wood and wood-based materials.The high-quality TCT (Tungsten Carbide Tipped) teeth provide excellent wear resistance and long service life. Its precision-engineered design ensures smooth cutting performance and reliable results for both professional and everyday applications.The DeWALT DT1209-QZ is an ideal choice for carpenters, installers, and DIY users looking for a durable, high-performance saw blade compatible with 165 x 20 mm circular saws.Technical Specifications Brand: DeWALT Model: DT1209-QZ Type: Circular saw blade Blade diameter: 165 mm Bore: 20 mm Number of teeth: 24 Tooth type: TCT (Tungsten Carbide Tipped) Application: Wood and wood-based materials Package Includes 1 x DeWALT Circular Saw Blade DT1209-QZ..
9.99€
Ex Tax:8.33€
Add to Cart
Brand: Milwaukee Stock: In Stock
Milwaukee HSS-G Combination Drill Bit M5 x 57 mm, 1/4" Hex, 4932498263DescriptionThe Milwaukee 4932498263 is a HSS-G combination drill bit featuring an M5 x 57 mm size and a 1/4" Hex shank, designed for precise drilling and hole preparation. The standard 1/4" Hex connection provides secure holding and quick bit changes in compatible drills and impact drivers. Manufactured from HSS-G (High Speed Steel - Ground), the drill bit delivers excellent precision, wear resistance, and reliable performance in professional metalworking and installation applications. Its compact design makes it suitable for use in confined spaces and tasks requiring high accuracy. The Milwaukee 4932498263 is an excellent choice for installers, mechanics, and metalworking professionals seeking a durable and precise drilling accessory.Technical Specifications Brand: Milwaukee Type: Combination drill bit Material: HSS-G Size: M5 x 57 mm Shank: 1/4" Hex Application: Drilling and hole preparation Package Includes 1 x Milwaukee HSS-G Combination Drill Bit M5 x 57 mm..
-20%
10.00€ 12.50€
Ex Tax:8.33€
Add to Cart
Showing 41 to 60 of 989 (50 Pages)
Product Filter