Screwdriver bits for precise installatio..
Goat's Foot for service work and install..
Impact bits for screwdrivers, impact wre..
Impact screwdriver for tight screws and ..
Multifunctional bit wrench - a practical..
Brand: Bosch
Stock: In Stock
Bosch PRO Impact T30 Screwdriver Bit, 90 mm, 1 Piece, 2608522537
Bosch 2608522537 is an impact bit in T30, 90 mm long, 1 piece per pack,, from the PRO Impact range. The shank is an impact-rated 1/4" hex.
The T30 recess
T30 is a six-lobe Torx recess. Its advantage over a cross head is geometric: force is transmitted perpendicular to the walls of the recess rather than at an angle. So a Torx bit does not cam out, needs no constant end pressure and practically never chews the head. That is what made it the standard on structural screws, furniture fittings and decking.
Up to 50 times more robust
Bosch states up to 50 times the durability of its standard 2607001528 Extra Hard bit. It comes from:
Heat-treated modified steel - resistant to high torque instead of twisting permanently.
An extended torsion zone - a narrowed section of the shank that absorbs the impact pulse before it reaches the tip.
An impact driver delivers torque in blows, not smoothly. Without a torsion zone every blow goes straight into the tip; with one, the shank takes the energy by twisting elastically. That is why ordinary bits break in an impact driver within hours while impact-rated ones last months.
The 90 mm length
90 mm is the long bit. It is used where the screw sits recessed, in a deep counterbore or behind an edge - furniture fittings, fixings in a deep hole, or where the driver nose must not touch the visible surface. A long bit is also less stable: it needs the machine held square to the screw axis.
Magnetic tip and colour coding
The tip is magnetic, with a black phosphate coating - the screw stays on the bit while you place it one-handed. The bits are colour coded, so you find the size in the box without reading labels.
T30 and structural screws
T30 is the size found on large timber screws - coach screws, decking screws, 6-8 mm structural fixings. These are also the screws with the highest tightening torque, which is exactly where a cross head would chew out. The 90 mm length comes from the same application: in a beam, deck or joist the screw often passes through a thick member and the head ends up deep.
Technical specifications
ManufacturerBosch
Article number2608522537
RangePRO Impact
RecessT30
Length90 mm
Pack quantity1 piece
Shank1/4" hex, impact rated
MaterialHeat-treated modified steel
Torsion zoneExtended
TipMagnetic, black phosphate coating
For machinesImpact drivers and drill drivers
Questions and Answers
How many bits are in the pack?
1 piece - a T30 bit, 90 mm long.
Why 90 mm specifically?
90 mm is the long bit. It is used where the screw sits recessed, in a deep counterbore or behind an edge - furniture fittings, fixings in a deep hole, or where the driver nose must not touch the visible surface. A long bit is also less stable: it needs the machine held square to the screw axis.
What does the torsion zone do?
It absorbs the impact pulse by twisting the shank elastically before the energy reaches the tip. That is why ordinary bits break within hours in an impact driver while impact-rated ones last months.
Do they work in an ordinary drill driver?
Yes - the shank is a 1/4" hex and the bits run in an impact driver and in an ordinary drill driver alike.
How much more durable are they?
Bosch states up to 50 times against its standard 2607001528 Extra Hard bit - from the heat-treated modified steel and the extended torsion zone.
Do they hold the screw?
Yes - the tip is magnetic with a black phosphate coating. The screw stays on the bit while you place it one-handed.
Can I use a hex key instead of Torx?
No. A hex and a Torx recess differ in the number and shape of their lobes. A hex key in a Torx head bears on only three points and rounds the recess at the first serious load.
..
5.05€
Ex Tax:4.21€
Brand: Bosch
Stock: Delivery in 1-3 days
Product Description11 HSS-TiN metal drill bits, 1.5-6.5 mm. 6 carbide drill bits for stone, 4-10 mm. 5 wood drill bits, 4-10 mm. 2 flat countersink bits, Titanium, O 16/22 mm. 18 bits L = 25 mm - PH 1/2/2/3, PZ 1/2/2/3;SL 4/6/7, HEX 3/4/5/6, T 15/20/25; 3 socket wrenches 7/8/10 mm. Socket wrench adapter, diameter gauge; knife; universal magnetic holder; 50-piece X-Line Titanium set..
24.31€
Ex Tax:20.26€
Brand: Milwaukee
Stock: In Stock
Milwaukee 48005503 Metal Reciprocating Saw BladeDescription:
The Milwaukee 48005503
carbide reciprocating saw blade is 300 mm
long and features NITRUS CARBIDETM
technology. Its nitro-carbide composition is specially designed to provide exceptional durability, cutting up to three times longer than standard carbide teeth. With their 7
teeth per inch (TPI
) design, the blades ensure quick start-up and smooth cutting, while the large openings allow for easy chip removal. With a 1.27 mm
thick body, the blades ensure precise, straight cuts, while the 25 mm
blade height improves stability and reduces vibration. They guarantee top performance when working with various thick metals, including cast iron pipes, waste pipes, and drain pipes, offering exceptionally fast and efficient cutting across a wide range of applications.
Technical specifications:Blade length: 300 mm;Teeth per inch: 7;Thickness: 1.27 mm;Height: 25 mm;Cutting material: thick metals such as cast iron, waste pipes, and drainage pipes;Max. cutting capacity for cast iron pipe/metal pipe: Ø 10-250 mmMax. cutting capacity for non-ferrous metals/stainless steel/steel: 5 - 13 mmQuantity per package: 5 pcs...
214.78€
Ex Tax:178.98€
Brand: Milwaukee
Stock: In Stock
Milwaukee 48005563 Metal Reciprocating Saw BladeDescription:
The Milwaukee 48005563
carbide reciprocating saw blade is 300 mm
long and features NITRUS CARBIDETM
technology. Its nitro-carbide composition is specially designed to provide exceptional durability, cutting up to three times longer than standard carbide teeth. With their 7
teeth per inch (TPI
) design, the blades ensure quick start-up and smooth cutting, while the large openings allow for easy chip removal. With a 1.27 mm
thick body, the blades ensure precise, straight cuts, while the 25 mm
blade height improves stability and reduces vibration. They guarantee top performance when working with various thick metals, including cast iron pipes, waste pipes, and drain pipes, offering exceptionally fast and efficient cutting across a wide range of applications.
Technical specifications:Blade length: 300 mm;Teeth per inch: 7;Thickness: 1.27 mm;Height: 25 mm;Cutting material: thick metals such as cast iron, waste, and drainage pipes;Max. cutting capacity for cast iron and metal pipes: Ø 10-250 mmMax. cutting capacity in non-ferrous metals, steel, and stainless steel: 5-13 mmQuantity per package: 5 pcs...
277.65€
Ex Tax:231.38€
Brand: Stanley
Stock: In Stock
Durable Stanley PZ-style bits are manufactured with the precision and accuracy required for a perfect fit on the screw head. Stanley offers both universal bits for general use and professional-grade bits made from the highest-quality materials for exceptional durability.
..
1.53€
Ex Tax:1.28€
Brand: Dewalt
Stock: In Stock
DeWALT DT20500 Magnetic Corner ClampDescription:
The DeWALT
magnetic angle holder is a high-quality 2-in-1
right-angle attachment. It is designed to make screwing and drilling in awkward angles easier. It features a metal gearbox that can withstand the most powerful impact drivers, and its compact 38mm
-deep body allows you to reach tight spaces easily and comfortably. Metal Gear case with quick-release bits for durability and convenience on any job site. A strong ground magnet holds the clip in place for easy one-handed use.Technical specifications:Application: for use with impact driversOverall length: 1016 mmHead length: 65 mmHead depth: 38 mmTorque: up to 43 NmDrive: 1/4'' hexhttps://youtu.be/8si3-ipk7Vw..
-19%
21.47€ 26.40€
Ex Tax:17.89€
Brand: Dewalt
Stock: In Stock
DeWALT DT20501 Magnetic ExtensionDescription:The DeWALT DT20501
Flexible Angle Extension with Magnetic Tip is a high-quality 4-in-1
attachment that includes a modular attachment, a right-angle flexible shaft, an 8-angle flexible shaft, and a straight flexible shaft. It is designed to make screwing and drilling in tight, awkward corners easier. It features a metal gearbox built to withstand the most powerful impact drivers, and its compact 38mm body allows you to reach tight spaces easily and comfortably.
Technical Specifications:Application: for use with impact driversOverall length: 1143 mmHead length: 65 mmHead depth: 38 mmTorque: up to 43 NmDrive: 1/4'' hexhttps://youtu.be/8si3-ipk7Vw..
-16%
32.00€ 38.00€
Ex Tax:26.67€
Brand: Dewalt
Stock: In Stock
DeWALT DT20502 Magnetic ExtensionDescription:
The DeWALT DT20502 Flexible Angle Extension with Magnetic Tip is a high-quality 4-in-1 attachment that includes a modular attachment, a right-angle flexible shaft, an 8-angle attachment, and a straight flexible shaft. It is designed to make screwing and drilling in tight, awkward angles easier. It features a metal gearbox built to withstand the most powerful impact drivers, and its compact 38mm body allows you to reach tight spaces easily and comfortably.
Technical Specifications:Application: for use with impact driversHead length: 65 mmTorque: up to 43 NmDrive: 1/4'' hex..
-24%
35.28€ 46.64€
Ex Tax:29.40€
Brand: Dewalt
Stock: Delivery in 1-3 days
The DeWalt DT70523TS 32-piece magnetic adapter and bit set is a highly practical set that includes a bit holder for use with drills, screwdrivers, or bit drivers. It provides optimal flexibility for maximum service life in high-impact and high-torque applications. The DeWALT DT70523 set offers longer life, faster, and more precise screwdriving thanks to the specially designed bit tip, which optimizes contact with the fastener
. The new bit holder innovation features a 10-point magnetic locking system. Particularly suitable for any DIYer, at home and in the workshop. Durable case with rubber coating and belt clip. Precision and durable screwdrivers in all standard sizes. Includes a quick-change bit holder.
Specifications:
Set: 32 pieces
Phillips bits: PH1, PH2x3, PH3
Pozi bits: PZ1x2, PZ2x5, PZ3x3
PR2x2 bit
Torx bits: T10x2, T15x2, T20x2, T25x2, T27, T30, T40
SB bits: SL6x2, SL8
1 x magnetic holder
Weight: 0.30 kg..
18.60€
Ex Tax:15.50€
Brand: Dewalt
Stock: Delivery in 1-3 days
Dewalt DT70731T Impact Bit and Socket Set, 37-Piece, FLEXTORQ
The Dewalt DT70731T FLEXTORQ screwdriver bit set is a professional tool set consisting of popular tools for working with various fasteners. It is suitable for use with screwdrivers and drills. This set includes 37 items-35 single-ended bits in various sizes, an aluminum magnetic sleeve, and a holder. The plastic case with a transparent lid ensures convenient storage and use of the bits. Made of chrome-vanadium steel, the set is characterized by high strength, wear resistance, and a long service life even with frequent, intensive use. FLEXTORQ bits are designed with a torque zone to absorb torque peaks, allowing for optimal bit flexibility and a longer service life in demanding applications. They are stored in a sturdy case compatible with the TSTAK system.
The set includes:25 mm bits: 1 x Ph1, 3 x Ph2, 1 x Ph3, 2 x PZ1, 8 x PZ2, 3 x PZ3, 1 x T20, 1 x T25, 1 x T25 (protective), 1 x SL4-6;57 mm bits: 2 x Ph2, 1 x Pz1, 5 x Pz2, 1 x PZ3, 1 x T20, 1 x T25;89 mm bits: 1 x PH2, 1 x PZ2;Aluminum magnetic sleeve: 1 x ALU;Compact magnetic drive with twist zone: 1 pc...
40.85€
Ex Tax:34.04€
Brand: Dewalt
Stock: In Stock
DEWALT DT71517T Angle Attachment Ideal for screwing and drilling holes in hard-to-reach places. Precision gears for maximum torque. Ideal for use with a cordless screwdriver. Magnetic bit holder. 1/4" hex shank. Bit shank type:6-sided
Brand: DeWALT
Model: DT71517T
Drive size: 1/4"
Pack size (pcs): 9 pcs.
Weight: 0.31 kg
Item type: Holder..
-32%
22.50€ 33.23€
Ex Tax:18.75€
Brand: Dewalt
Stock: In Stock
DeWalt DT71563 Drill Bit and Bit SetDescription:
The DeWalt DT71563 Combination Drill Bit and Bit Set includes 100 pieces, featuring a variety of bits and drill bits that cover the most common tasks around the home or workshop. It includes a magnetic bit holder that is compatible with drills, screwdrivers, or power tools, ensuring maximum flexibility and convenience while working. The set can be easily organized and used outside the case for added convenience. It comes in a convenient plastic case for easy storage and transport.
Technical specifications:Number of pieces: 100Profile: PH, PZ, SB, TX, hex, drill bitsLength: 25, 50 mmDrive: 1/4" (hex)Shape: C6.3, E6.3Application: for screwdrivers and power toolsWeight: 1.455 kgSet includes:2 x 3.0 mm wood drill bit1 x 3.5 mm wood drill bit1 x 4.0 mm wood drill bit1 x 4.5 mm wood drill bit2 x 5.0 mm wood drill bit1 x 5.5 mm wood drill bit1 x 6.0 mm wood drill bit1 x 6.5 mm wood drill bit1 x 7.0 mm wood drill bit1 x 7.5 mm wood drill bit1 x 8.0 mm wood drill bit1 x 6.0 mm masonry drill bit1 x 7.0 mm masonry drill bit1 x 8.0 mm masonry drill bit1 x 32 mm wood router bit1 x 44 mm wood router bit1 x 1.5 mm metal drill bit1 x 2.0 mm metal drill bit1 x 2.5 mm metal drill bit2 x 3.0 mm metal drill bit1 x 3.5 mm metal drill bit1 x 4.0 mm metal drill bit1 x 4.5 mm metal drill bit1 x 5.0 mm metal drill bit1 x 5.5 mm metal drill bit1 x 6.0 mm metal drill bit1 x 6.5 mm metal drill bit1 x Straight bit SB6.0x25mm2 x Phillips screwdriver bit PH1x25mm1 x PH1x50mm Phillips bit2 x PH2 x 25 mm Phillips bit2 x PH2x50mm Phillips bit2 x Phillips bit PH3 x 25 mm1 x PZ1x50mm Phillips bit2 x PZ2x25mm Phillips bit2 x PZ2x50mm Phillips bit2 x PZ3x25mm Phillips bit3 x Torx bit TX10x25mm1 x Torx bit TX10x50mm3 x Torx bit TX15x25mm1 x Torx bit TX15x50mm3 x Torx bit TX20x50mm3 x Torx bit TX25x25mm2 x Torx bit TX25x50mm3 x Torx bit TX30x25mm2 x Torx bit TX30x50mm3 x Magnetic bit..
-30%
35.28€ 50.72€
Ex Tax:29.40€
Brand: Dewalt
Stock: In Stock
DeWalt DT71569 Drill Bit and Bit Set, 100-Piece
The DeWALT DT71569
set consists of 100 pieces. It includes bits suitable for drilling into metal, wood, plastic, and masonry, as well as a wide selection of standard screwdriver bits to maximize the potential of your drill. The hardened ToughCoat finish makes the set particularly suitable for any DIYer, at home or in the workshop. It comes in a plastic storage case compatible with DeWALT's T-stak storage range.
Technical specifications:Brand: DeWALT;Material: HSS;Drill bit type: twist;Application: for wood, metal, plastic, masonry, etc.Number of pieces: 100;Weight: 1.595 kgSet includes:50 mm bits: PZ2x15;25 mm bits: PZ1x2, PZ2x29, PZ3x2; PH1x2, PH2x2, PH3; SL4, SL5, SL6, SL7.2; T10x2, T15x2, T20x2, T25x2, T27x2, and T30x2;Metal drill bits: 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, and 7 mm;Concrete drill bits: 4, 5, 5.5, 6x2, 8x2, and 10 mm;Wood drill bits: 32, 38, 44, and 54 mm;Inserts: 5, 6, 7, 8, and 10 mm;Core bit holder: 1 pc.;Bit holder: 1 pc.;Plastic case for storage and transport: 1 pc...
48.30€
Ex Tax:40.25€
Brand: Dewalt
Stock: In Stock
DeWALT DT7801T BitDescription:
The DeWALT DT7801T extended bit is designed for impact drivers, ensuring reliability and high precision during operation. The specially designed body prevents the screw head from slipping, ensuring stability and efficiency when tightening.
Technical specifications:Size: PZ2Length: 152 mmShape: E6.3Application: for screwdrivers and impact driversWeight: 0.040 kg..
2.15€
Ex Tax:1.79€
Brand: Rennsteig
Stock: In Stock
DeWALT DWHT0-55529 Goat's Foot ScrewdriverDescription:
The DeWALT DWHT0-55529 Goat's Foot Bar has a length of 254 mm and features an ergonomic design. The tool head is 40% wider, which significantly reduces damage to materials during operation. This tool is suitable for construction, renovation, and demolition work, as it is comfortable for extended use and durable under harsh conditions.
Technical specifications:Length: 254 mmWeight: 0.387 kg..
-13%
15.99€ 18.40€
Ex Tax:13.33€
Brand: Dewalt
Stock: In Stock
DeWalt EXTREME IMPACT T10 Bits, 57 mm, 5 Pieces, DT7393T-QZ
DeWalt DT7393T-QZ is a pack of 5 impact bits in T10, 57 mm long. The bits have an extended torsion zone and are made for impact drivers.
The T10 recess
T10 is a small Torx size. The six-lobe profile transmits force perpendicular to the walls of the recess rather than at an angle - so a Torx bit does not cam out and needs no constant end pressure on the machine.
At small sizes like T10 that matters even more: a thin cross recess would chew out at the first serious load, while Torx takes it. That is why T10 turns up on furniture fittings, electrical boxes, appliances and housings.
The torsion zone
An impact driver delivers torque in pulses, hundreds of times a minute. Without a torsion zone every pulse goes straight into the tip and eventually snaps it. An extended torsion zone is a narrowed section of the shank that twists elastically and absorbs the blow before it reaches the tip.
The 57 mm length
57 mm is the middle length. It gives more clearance than a short 25 mm bit - the driver nose does not foul the workpiece - and stays more stable than the long 90 and 157 mm bits, where any tilt of the machine is multiplied.
Why five pieces
A bit is a consumable, and small Torx sizes like T10 are also the most fragile: the tip is thin and unforgiving of a tilted machine. Five pieces means a broken bit does not stop the job.
T10 versus TX10
T10, TX10 and Torx 10 are the same profile - only the maker's notation differs. Watch out for TR10 though: that is the security version with a pin in the centre, which will not accept a normal T10 bit and turns up on covers and housings the maker would rather you did not open.
Technical specifications
ManufacturerDeWalt
Article numberDT7393T-QZ
TypeImpact bits
RecessT10
Length57 mm
Pack quantity5 pieces
Fitting1/4" hex
Torsion zoneExtended
For machinesImpact drivers and drill drivers
Questions and Answers
How many bits are in the pack?
5 pieces, all T10 at 57 mm.
What is the difference between Torx and a cross head?
Torx transmits force perpendicular to the walls of the recess rather than at an angle. The bit does not cam out, needs no constant pressure and practically never chews the head.
Can I use a hex key instead of Torx?
No. A hex bears on only three points in a Torx recess and rounds it out at the first serious load.
What does the torsion zone do?
It twists elastically and absorbs the impact pulse before it reaches the tip. Without it every blow goes straight into the tip and snaps it.
Why 57 mm?
57 mm gives more clearance - the driver nose does not foul the workpiece - and stays more stable than the long 90 and 157 mm bits.
Do they work in an ordinary drill?
Yes. The fitting is a standard 1/4" hex and the bits run in either type of machine.
Why do small Torx bits break more often?
Because their tips are thin and unforgiving of a tilted machine. At T10 any angled load concentrates in a very small area - which is why they are sold in multi-packs.
..
4.29€
Ex Tax:3.58€
Brand: Dewalt
Stock: In Stock
DeWalt EXTREME IMPACT PZ2 Bits, 50 mm, 5 Pieces, DT7391T-QZ
DeWalt DT7391T-QZ is a pack of 5 impact bits in PZ2, 50 mm long. The bits have an extended torsion zone and are made for impact drivers.
The PZ2 recess
PZ2 is the most-used Pozidriv size in Europe. Pozidriv looks like a cross head but carries four extra smaller ribs between the main arms. They increase contact area and stop the bit camming out of the screw - the difference from Phillips, where constant end pressure on the machine is mandatory.
That is why PZ2 is the standard on timber screws, plasterboard, furniture fittings and very nearly everything in installation work in Europe.
The torsion zone
An impact driver delivers torque in pulses, hundreds of times a minute. Without a torsion zone every pulse goes straight into the tip and eventually snaps it. An extended torsion zone is a narrowed section of the shank that twists elastically and absorbs the blow before it reaches the tip.
The 50 mm length
50 mm is the middle length. It gives more clearance than a short 25 mm bit - the driver nose does not foul the workpiece - and stays more stable than the long 90 and 150 mm bits, where any tilt of the machine is multiplied.
Why five pieces
A bit is a consumable. Under heavy use PZ2 wears out fastest because it is used most - and that is exactly when having no spare stops the work. Five pieces means a box that does not run out halfway through the job.
Impact driver or drill driver
These bits are designed for an impact driver but work in a drill driver too. The reverse does not hold: an ordinary bit in an impact driver snaps at the shoulder within the first few screws, because it has no torsion zone to absorb the blows. If both kinds are mixed in a case, the impact ones are the ones with the thinner waist.
Technical specifications
ManufacturerDeWalt
Article numberDT7391T-QZ
TypeImpact bits
RecessPZ2
Length50 mm
Pack quantity5 pieces
Fitting1/4" hex
Torsion zoneExtended
For machinesImpact drivers and drill drivers
Questions and Answers
How many bits are in the pack?
5 pieces, all PZ2 at 50 mm.
What is the difference between PZ and PH?
Pozidriv (PZ) has four extra ribs between the arms of the cross. They stop the bit camming out - with Phillips (PH) that is compensated by constant end pressure on the machine.
Can a PH bit go in a PZ screw?
It can, but it should not. A PH bit sits at an angle, does not seat fully and chews out the recess - after which nothing will remove the screw.
What does the torsion zone do?
It twists elastically and absorbs the impact pulse before it reaches the tip. Without it every blow goes straight into the tip and snaps it.
Why 50 mm rather than 25?
50 mm gives more clearance - the driver nose does not foul the workpiece - and stays more stable than the long 90 and 150 mm bits.
Do they work in an ordinary drill?
Yes. The fitting is a standard 1/4" hex and the bits run in either type of machine.
Why does PZ2 run out first?
Because it is used most - it is the standard on timber screws, plasterboard and furniture fittings. That is why it is sold in multi-packs.
..
6.14€
Ex Tax:5.12€
Brand: Dewalt
Stock: In Stock
DeWalt FLEXTORQ Drill Drive Set, 32 Pieces, DT70741T-QZ
DeWalt DT70741T-QZ is a 32-piece drilling and driving set made up of EXTREME FLEXTORQ bits, three hex-shank drill bits, a magnetic holder and an 8 mm nut driver, laid out in a tough case.
The torsion zone - why FLEXTORQ exists
FLEXTORQ bits have a built-in torsion zone - a deliberately weakened section between tip and shank. With an impact driver, torque does not arrive smoothly but as a rapid series of blows. Without a torsion zone each of those spikes reaches the tip directly and breaks it; with one, the zone twists elastically and absorbs the blow, springing back between impulses. That is the difference in bit life under power driving - and it shows most clearly on Torx and Pozidriv fasteners, where the tip is slender.
What the set contains
12 Pozidriv 25 mm bits: PZ1, 8 x PZ2, 3 x PZ3
2 Phillips 25 mm bits: PH2, PH3
1 slotted 25 mm bit: SL6
7 Torx 25 mm bits: T15, 2 x T20, 2 x T25, 2 x T30
3 Pozidriv 57 mm bits: 2 x PZ2, 1 x PZ3
1 Pozidriv 89 mm bit: PZ2
1 Phillips 89 mm bit: PH2
1 cleanable 8 mm nut driver
1 magnetic bit holder with torsion zone
3 hex-shank drill bits: 5, 6 and 8 mm
Why so many PZ2
Eight of the twelve short Pozidriv bits are PZ2 - and that is not an oversight in the selection. PZ2 is the profile on the great majority of wood and plasterboard screws in European construction, so it wears out many times faster than any other. A set with one bit per profile runs out exactly when the PZ2 goes blunt; with eight of them, the work continues.
Three lengths for three situations
25 mm is the standard length for use in a holder. 57 mm and 89 mm come into their own when the screw head sits down a recess - in a hole, between studs, in the corner of a box - where a short bit in a holder simply does not reach. Long bits are also more forgiving of slight misalignment, because the length itself allows some flex.
Hex-shank drill bits
The three drill bits (5, 6 and 8 mm) have a hex shank rather than a round one. That means they go straight into the bit holder or into an impact driver, with no change of tool. The practical consequence during installation: drill the hole and drive the screw immediately, with a two-second bit change instead of unclamping a chuck.
The case
The set comes in a tough case compatible with the TSTAK system via the caddy and the large case in the range. Every bit has its own slot, which means a missing bit is visible at a glance - the simplest defence against a set scattering across the job.
Technical specifications
ManufacturerDeWalt
Article numberDT70741T-QZ
RangeEXTREME FLEXTORQ
Piece count32
Pozidriv 25 mm bits12 (PZ1, 8 x PZ2, 3 x PZ3)
Phillips 25 mm bits2 (PH2, PH3)
Slotted 25 mm bit1 (SL6)
Torx 25 mm bits7 (T15, 2 x T20, 2 x T25, 2 x T30)
57 mm bits3 (2 x PZ2, PZ3)
89 mm bits2 (PZ2, PH2)
Nut driver1 x 8 mm, cleanable
Magnetic holder1, with torsion zone
Drill bits3 hex shank: 5, 6, 8 mm
Bit featureBuilt-in torsion zone
PackagingTough case, TSTAK compatible
Questions and Answers
What does the torsion zone do?
A deliberately weakened section between tip and shank that twists elastically when torque spikes, absorbing the blow instead of letting it reach the tip. On an impact driver, torque arrives as a series of sharp impulses - exactly what breaks ordinary bits.
How many bits are in the set, and which?
32 pieces in total: 12 short Pozidriv, 2 Phillips, 1 slotted, 7 Torx, 3 medium and 2 long bits, an 8 mm nut driver, a magnetic holder and three hex-shank drill bits in 5, 6 and 8 mm.
Why are there eight PZ2 bits?
PZ2 is the profile on the great majority of wood and plasterboard screws in European construction and wears out many times faster than the rest. A set with one bit per profile runs out exactly when the PZ2 goes blunt.
What are the drill bits and what are they for?
Three drill bits in 5, 6 and 8 mm with a hex shank, which fit straight into the bit holder or an impact driver. That lets you drill a hole and drive the screw immediately, without unclamping a chuck.
What are the 57 and 89 mm bits for?
For screw heads that sit down a recess - in a hole, between studs or in the corner of a box - where a short bit in a holder does not reach. Long bits are also more forgiving of slight misalignment.
Is the case compatible with other systems?
Yes - the tough case is compatible with the TSTAK system through the caddy and the large case in the range, so the set fits into an existing stack.
Can it be used with an ordinary drill driver?
Yes. The bits have a universal 1/4" hex and work with any machine. The torsion zone simply is not loaded under smooth torque - its advantage shows specifically with an impact driver.
..
-15%
42.00€ 49.60€
Ex Tax:35.00€
Brand: Dewalt
Stock: In Stock
DeWALT DWHT55528-1Description:
The DeWALT DWHT55528-1
gooseneck is made of high-quality carbon steel with high strength and tensile resistance. This multi-purpose tool features a sharp, beveled tip for driving and pulling nails in multiple ways. It has a length of 533 mm
. With a tip width of 65 mm
, it is suitable for use in tight spaces.
Technical specifications:Total length: 533 mmTip width: 65 mm..
-11%
14.00€ 15.70€
Ex Tax:11.67€
Brand: Dewalt
Stock: In Stock
DeWalt Screwdriver Bit Set, 32 Pieces, with Magnetic Holder, DT71562
DeWalt DT71562 is a 32-piece set - 25 mm bits in S2 steel plus a magnetic bit holder, in a Tough Case. The fitting is a 1/4" hex.
Which sizes are included
The set covers the four recesses met in everyday work:
Phillips - PH1, PH2, PH3
Pozidriv - PZ1, PZ2, PZ3
Slotted - SL3, SL4, SL5, SL6.5
Torx - T15, T20, T25, T27, T30, T40
The most-used sizes - PZ2 and PH2 - are duplicated several times over. That is not padding: a bit is a consumable, and in a set with one of the size you actually use, that one runs out while the rest are still new.
S2 steel
The bits are S2 steel - a chrome-molybdenum tool steel used specifically for driver bits. It combines tip hardness, so the point does not round off in the recess, with enough toughness not to snap under a sudden torque spike. It is the standard below which there is no point going for daily work.
The magnetic holder
The set includes a magnetic bit holder. It solves two things at once: it holds the bit so it does not stay behind in the screw head, and it holds the screw while you place it one-handed. Working at height or on a ladder, the second often decides whether the job is possible at all.
The case
Tough Case is a connectable box with a clear lid. The transparency has a concrete benefit with 30 bits that look nearly identical: you see which slot is empty before opening it, and you know which size to buy.
Who it is for
The set is for everyday general work - fitting ironmongery, assembly, consumer units, maintenance. The bits are 25 mm, the short standard: they run straight in the driver chuck, or through the supplied holder when extra reach is needed.
Technical specifications
ManufacturerDeWalt
Article numberDT71562
TypeBit set with holder
Pieces32
Bit length25 mm
MaterialS2 steel
Fitting1/4" hex
PhillipsPH1, PH2, PH3
PozidrivPZ1, PZ2, PZ3
SlottedSL3, SL4, SL5, SL6.5
TorxT15, T20, T25, T27, T30, T40
HolderMagnetic
CaseTough Case with clear lid
Questions and Answers
Which recesses are in the set?
Four: Phillips PH1-PH3, Pozidriv PZ1-PZ3, slotted SL3 to SL6.5 and Torx T15 to T40. The most-used sizes are duplicated several times.
Why several PZ2 bits?
Because it is the most-used size. A bit is a consumable - in a set with one of the size you actually use, that one runs out while the rest are still new.
What is S2 steel?
A chrome-molybdenum tool steel for driver bits. It combines tip hardness, so the point does not round off in the recess, with toughness, so it does not snap under a torque spike.
What is the magnetic holder for?
Two things: it holds the bit so it does not stay in the screw head, and it holds the screw while you place it one-handed - on a ladder, often the deciding factor.
Do they work in an impact driver?
The fitting is a 1/4" hex so the bits go in. For heavy impact-driver use, though, dedicated impact bits with a torsion zone are preferable - they absorb the pulse in the shank.
How long are the bits?
25 mm - the short standard. They run straight in the chuck, or through the supplied holder when extra reach is needed.
Why a clear lid?
So you can see which slot is empty without opening the case. With 30 near-identical bits, that is the difference between knowing what you are missing and finding out on site.
..
12.48€
Ex Tax:10.40€