Screwdriver bits for precise installatio..
Goat's Foot for service work and install..
Impact bits for screwdrivers, impact wre..
Impact screwdriver for tight screws and ..
Multifunctional bit wrench - a practical..
Brand: Milwaukee
Stock: Delivery in 1-3 days
Milwaukee Shockwave Screwdriver and Impact Driver Bits
Milwaukee SHOCKWAVE 2nd Generation 25 x PZ2 25 mm Impact Duty Screwdriver Bits are designed for use with impact drivers, but they provide a comprehensive system solution for all your drilling and fastening needs.
Features and Benefits:
The larger, optimized shock zone reduces stress on the tip, resulting in fewer tip breakages and up to 30X longer life. The Shock Zone design and special heat treatment combine to allow the bit to flex with optimal performance.
The precision-milled tip ensures the best fit in the screw head, reducing wobble and slippage, resulting in exceptional service life-up to 30X longer. Milwaukee's custom-engineered metal formula makes Shockwave bits more impact-resistant..
16.64€
Ex Tax:13.87€
Brand: Milwaukee
Stock: In Stock
Milwaukee Shockwave Screwdriver Bits
Milwaukee SHOCKWAVE 2nd Generation 25 x TX30 25 mm Impact Duty Screwdriver Bits are designed for use with impact drivers, but they provide a comprehensive system solution for all your drilling and fastening needs.
Features and Benefits:
The larger, optimized shock zone reduces stress on the tip, resulting in fewer tip breakages and up to 30 times longer life. The Shock Zone design and special heat treatment combine to allow the bit to flex with optimal performance.
The precision-milled tip ensures the best fit in the screw head, reducing wobble and stripping, resulting in exceptional service life-up to 30X longer. Milwaukee's custom-engineered metal formula makes Shockwave bits more impact-resistant
MIWK-2849..
17.37€
Ex Tax:14.48€
Brand: Milwaukee
Stock: In Stock
Milwaukee 4932471574 Impact Sockets, TX30 x 50 mm, 10 pieces
The Milwaukee 4932471574
impact bits are part of the SHOCKWAVETM
Impact Duty line, designed for use with impact wrenches. They are suitable for demanding applications under heavy loads, but also provide a comprehensive solution for all users who need to drill and drive simultaneously. The combination of the SHOCKZONETM
shape and special heat treatment absorbs impacts and allows the spring to flex during operation. The pressure-forged tip delivers superior screwdriving performance, reduces the risk of the tip popping out or slipping out of the drive, and extends its service life.
Technical Specifications:Brand: Milwaukee;Type: TX30 (Torx); Length: 50 mm;Drive type: 1/4";Material: steel;Application: for impact wrenches;Quantity per package: 10 pcs...
-39%
9.00€ 14.70€
Ex Tax:7.50€
Brand: Milwaukee
Stock: In Stock
Milwaukee 4932471577 SHOCKWAVE Impact SocketsMilwaukee's reinforced impact bits are designed for use with impact wrenches; the SHOCKWAVETM IMPACT DUTY accessory line is not only ideal for high-impact applications but also provides a comprehensive system solution for all user needs in drilling and fastening. SHOCK ZONETM geometry reduces stress on the tip, resulting in greater flexibility during use and a lower risk of breakage. The combination of SHOCK ZONETM design and special heat treatment absorbs impacts and allows for greater flexibility. Made from specially engineered Milwaukee steel, SHOCKWAVETM drill bits are more resistant to impact during use...
2.16€
Ex Tax:1.80€
Brand: Milwaukee
Stock: In Stock
Designed for use with impact drivers, the SHOCKWAVETM Impact DutyTM accessory line is not only ideal for heavy-duty applications but also provides a comprehensive system solution for all user needs in drilling and fastening
SHOCKZONETM reduces tip stress, resulting in fewer breakages. The compressed forged tip ensures the best fit with the screw head, reducing wear and slippage, which leads to exceptional life.The combination of the SHOCKZONETM design and special heat treatment absorbs impacts and allows the bit to flex like a spring.
Custom-engineered steel-Milwaukee®'s special formula makes SHOCKWAVETM bits more impact-resistant.
31 bits, 25 mm long:
1 x PH1 / 2 x PH2 / 1 x PH3, 1 x PZ1 / 2 x PZ2 / 1 x PZ3,
2 x TX10 / 2 x TX15 / 3 x TX20 / 2 x TX25 / 2 x TX30 / 1 x TX40,
1 x TX BO7 / 1 x TX BO8 / 1 x TX BO9 / 1 x TX BO10 / 1 x TX BO15 / 1 x TX BO20 / 1 x TX BO25
1 x Hex 3 mm / 1 x Hex 4 mm / 1 x Hex 5 mm / 1 x Hex 6 mm.
1 x SHOCKWAVETM locking magnetic holder 73 mm..
-41%
16.53€ 28.00€
Ex Tax:13.78€
Brand: Milwaukee
Stock: In Stock
Milwaukee 4932492005 Impact Socket Set - 48 piecesDescription: The Milwaukee 4932492005
Impact Bit Set features a laser-hardened WEAR GUARD TIP
for improved wear resistance and is designed for use with impact drivers. The SHOCKWAVE IMPACT DUTY
accessory line is not only ideal for heavy-duty impact applications but also provides a comprehensive system solution for all user needs in drilling and fastening. With the SHOCK ZONE
system, which reduces stress on the tip, resulting in fewer tip breakages.
Technical Specifications:Model: 4932492005Profile: PH, PZ, TX, HexDrive: HEXMaterial: Alloy steelNumber of pieces in the set: 48Set includes:24 x 25 mm: 1 x PH1, 3 x PH2, 1 x PH3, 1 x PZ1, 3 x PZ2, 1 x PZ3, 2 x TX10, 1 x TX15, 3 x TX20, 3 x TX25, 2 x TX30, 1 x TX40, 1 x Hex 4 mm, 1 x Hex 5 mm 16 x 50 mm: 2 x PH2, 1 x PH3, 2 x PZ2, 1 x PZ3, 1 x TX10, 1 x TX15, 2 x TX20, 2 x TX25, 2 x TX30, 2 x TX40 • 4 x 90 mm 1 x PH2, 1 x PZ2, 1 x TX20, 1 x TX251 x Shockwave magnetic bit holder 60 mm3 x Shockwave 1⁄4" hex drill bits for various materials (D) 5, 6, 8 mm..
-46%
26.58€ 49.00€
Ex Tax:22.15€
Brand: Milwaukee
Stock: In Stock
Milwaukee 4932493659 Insulated Screwdriver SetDescription:
The Milwaukee 4932493659 insulated screwdriver set is designed for safe and precise work on electrical installations and complies with the DIN EN/IEC 60900 standard. The tool is tested up to 10,000 V and guaranteed for use up to 1,000 V, ensuring a high level of protection for professional use. The handle features a 360° rotating rear cap, which allows for better control, higher speed, and precision when working on-site. The set includes a compact soft case for quick and convenient access to the bits, and the laser-engraved markings on the bits facilitate quick identification. The practical design and high-quality construction make this set a reliable choice for electricians and professionals who demand safety, convenience, and efficiency in their daily work.
Technical specifications:Profile: PH/PZ/SL/TInsulation: up to 1,000 VStandard: DIN EN/IEC 60900Quantity in set: 9 pcsThe set contains:CaseHandlePH00PH0PZ0SL2T6T7T8T10..
-43%
27.50€ 48.61€
Ex Tax:22.92€
Brand: Milwaukee
Stock: Delivery in 1-3 days
Milwaukee 4932479857 Magnetic Impact Sockets, PZ2 x 25 mm, 25 pieces
The Milwaukee 4932479857
impact bits are part of the SHOCKWAVETM
Impact Duty line, designed for use with impact wrenches. They are suitable for demanding applications under heavy loads, but also provide a comprehensive solution for all users who need to drill and drive screws simultaneously. The combination of the SHOCKZONETM
shape and special heat treatment absorbs impacts and allows the spring to flex during operation. The drop-forged tip delivers optimal screwdriving performance, reduces the risk of the tip popping out or slipping out of the drive, and extends its service life. Includes 25 PZ2-type bits, 25 mm long, as well as a 60 mm magnetic bit holder.
Technical specifications:Brand: Milwaukee;Type: PZ2 (Pozi); Length: 25 mm;Drive type: 1/4";Material: steel;Application: for impact wrenches;Quantity per package: 25 pcs;Set includes: 1 magnetic holder, 1/4" (60 mm)...
16.87€
Ex Tax:14.06€
Brand: Milwaukee
Stock: In Stock
Milwaukee 4932479858 Magnetic Socket Set, TX25 x 25 mm, 25 pieces
The Milwaukee 4932479858
impact bits are part of the SHOCKWAVETM
Impact Duty line, designed for use with impact wrenches. They are suitable for demanding applications under heavy loads, but also provide a comprehensive solution for all users who need to drill and drive screws simultaneously. The combination of the SHOCKZONETM
shape and special heat treatment absorbs impacts and allows the spring to twist during operation. The drop-forged tip delivers the best results when driving screws, reduces the chance of the tip popping out or slipping out of the drive, and extends its service life. Includes 25 TX25-type bits, 25 mm long, as well as a 60 mm magnetic bit holder.
Technical specifications:Brand: Milwaukee;Type: TX25 (Torx);Length: 25 mm;Drive type: 1/4";Material: steel;Application: for impact wrenches;Quantity per package: 25 pcs;Set includes: 1 magnetic holder, 1/4" (60 mm)...
-15%
14.32€ 16.87€
Ex Tax:11.93€
Brand: Milwaukee
Stock: In Stock
Milwaukee 4932498179 Multi-Purpose BitDescription:
The Milwaukee 4932498179
multifunctional screwdriver combines six commonly used sizes into one compact and practical solution designed for intensive professional use. The tool features 7 mm, 8 mm, 10 mm, 12 mm, 13 mm, and 17 mm bits, all stored in a single body, allowing for quick and easy changes without wasting time during work. The ergonomically shaped handle with a rubberized non-slip coating ensures a secure grip and comfort even during prolonged use. The sturdy construction ensures reliability and durability under heavy-duty conditions, making the Milwaukee 6-in-1 multifunctional socket a practical choice for professionals seeking efficiency and convenience in a single tool.
Technical specifications:Sizes: 7-17 mmQuantity in set: 7 pcsSet includes:Handle7 mm,8 mm,10 mm,12 mm,13 mm17 mm..
-25%
34.30€ 45.84€
Ex Tax:28.58€
Brand: Milwaukee
Stock: In Stock
Milwaukee 4932492652 Extended Impact Socket Set (Promotional)Description:
The Milwaukee 4932492652
Extended Impact Socket Set is made of high-quality alloy steel and comes in a convenient plastic case for easy storage and transport. The sizes of the sockets are laser-engraved for durability and easy identification in the toolbox.
Technical Specifications:Model: 4932492652Drive: 1/2"Sizes: 10, 11, 12, 13, 14, 17, 19, 21, 22, 24 mmQuantity per package: 12 pcsSet includes:10 x deep sockets: 10, 11, 12, 13, 14, 17, 19, 21, 22, 24 mm1/2" universal impact joint1/2" 150 mm impact extension..
-31%
86.41€ 125.78€
Ex Tax:72.01€
Brand: Milwaukee
Stock: In Stock
Milwaukee 48001082 Reciprocating Saw Blade for Frozen FoodsThe Milwaukee reciprocating saw blade features improved tooth geometry for optimal cutting speed and high durability. The blade is suitable for cutting frozen products. It is made of stainless steel with 6 teeth per inch for optimal performance and durability.
Technical specifications:Blade length: 300 mm;Material: stainless steel;Cutting material: frozen products;Teeth per inch: 6;Quantity per package: 1 pc...
18.09€
Ex Tax:15.08€
Brand: Milwaukee
Stock: In Stock
Milwaukee Screwdriver Bit Set, 27 Pieces, in a Case, 4932352747
Milwaukee article number 4932352747 is a 27-piece set: 26 bits 25 mm long plus a magnetic quick-release holder, laid out in a compact plastic case.
What the set contains
The selection is weighted by actual use rather than one bit per profile - which is why some sizes appear several times:
Phillips: 2 x PH1, 2 x PH2, 1 x PH3
Pozidriv: 2 x PZ1, 4 x PZ2, 2 x PZ3
Torx: 2 x TX10, 3 x TX15, 3 x TX20, 3 x TX25, 1 x TX30, 1 x TX40
1 magnetic holder with quick release
The four PZ2 bits are no accident: this is the profile on the great majority of wood and plasterboard screws in European construction, and it wears out many times faster than any other. A set with one bit per profile runs out exactly when the PZ2 goes blunt.
S2 steel hardened to 60 HRC
The bit body is S2 steel - a tool steel chosen for its combination of hardness and toughness. The tips go through a special hardening process at temperatures up to 870 °C and reach 60 HRC.
That figure has a concrete meaning. Softer steel deforms and the tip rounds off - the bit stops seating in the recess and starts to slip. Harder than necessary is brittle and snaps under side load. 60 HRC is the band where a bit holds its geometry without breaking in normal work.
Cold forming
The tips are cold formed rather than milled. Forming presses the material into a die instead of cutting material away - the result is a more accurate profile and a densified surface structure at the tip. A more accurate profile seats more fully in the recess, which means less wear on both the bit and the screw.
The case
The set comes in a compact plastic case with an extra-large latch - a detail you appreciate opening it with gloves on or with cold hands. A window at the front lets you see the contents without opening it while keeping dust off the bits. Every bit has its own slot, so a missing one is visible at a glance.
What it is for
This is a set for general installation work - plasterboard, timber framing, fitting out, hardware and electrical work. The bits are 25 mm, the standard length for use in a holder. The quick-release holder lets you change bits one-handed, with no sleeve to unscrew.
Technical specifications
ManufacturerMilwaukee
Article number4932352747
TypeBit set with magnetic holder
Piece count27 (26 bits + holder)
Bit length25 mm
Phillips2 x PH1, 2 x PH2, 1 x PH3
Pozidriv2 x PZ1, 4 x PZ2, 2 x PZ3
Torx2 x TX10, 3 x TX15, 3 x TX20, 3 x TX25, TX30, TX40
HolderMagnetic, quick release
Body materialS2 steel
Tip hardness60 HRC
Tip manufactureCold formed
PackagingPlastic case with window and extra-large latch
Questions and Answers
How many bits are in the set?
26 bits plus one magnetic quick-release holder - 27 pieces in total. All the bits are 25 mm long.
Why are there four PZ2 bits?
PZ2 is the profile on the great majority of wood and plasterboard screws in European construction and wears many times faster than the rest. A set with one bit per profile runs out exactly when the PZ2 goes blunt.
What does 60 HRC hardness mean?
The band where a bit holds its geometry without breaking. Softer steel deforms and the tip rounds off; harder than necessary is brittle and snaps under side load.
What does cold forming achieve?
The material is pressed into a die rather than cut away - producing a more accurate profile and a densified surface. A more accurate profile seats more fully in the recess, reducing wear on both bit and screw.
Is it suitable for an impact driver?
This is a standard professional set, not an impact-rated range. It works with an ordinary drill driver and by hand. For intensive impact-driver work, bits with a torsion zone from an Impact range are more suitable.
What sort of holder is included?
Magnetic, with quick release - bits change one-handed with no sleeve to unscrew. The magnet also holds the screw on the tip, letting you start one-handed.
What is the case like?
A compact plastic case with an extra-large latch that opens with gloves on, and a window at the front - the contents are visible without opening it and the bits stay free of dust.
..
-32%
25.00€ 37.00€
Ex Tax:20.83€
Brand: Milwaukee
Stock: In Stock
Brand: MILWAUKEECat. No.: MIWK-3707 / 4932471274The angle attachment is a useful tool for screwing or drilling in confined, hard-to-reach areas. Impact rating: suitable for use with the latest 18 V impact drivers, as well as cordless drivers up to 226 Nm and up to 3,600 rpm. Internal SHOCK ZONETM and advanced gear design for excellent power transmission and impact resistance. For all 1/4" screwdriving and drilling accessories. Very compact design: only 36 mm high and a true 90° angle, allowing access to tight spaces. Ergonomic rubber coating for safe and comfortable operation. The package includes the angle adapter and the following bits: 1 x PH2, 1 x PZ1, 2 x PZ2, 1 x PZ3, 1 x TX10, 1 x TX15, 1 x TX20, 1 x TX25, 1 x TX30...
-31%
23.00€ 33.54€
Ex Tax:19.17€
Brand: Milwaukee
Stock: In Stock
Milwaukee SHOCKWAVE Impact Bit Hex 10 mm, 25 mm, 4932500384
Milwaukee 4932500384 is an impact bit from the SHOCKWAVE Impact Duty range in Hex 10 mm, 25 mm long. The fitting is a 1/4" hex and the pack contains a single bit.
The Hex 10 mm recess
10 mm hex is the largest in this range. It is used on M12 bolts and larger structural connections - anchor plates, steel frames, machine bases. At those sizes an impact driver replaces a spanner and saves real minutes on every bolt.
What SHOCK ZONE is
An impact driver does not deliver torque smoothly - it delivers it in blows, hundreds of times a minute. Each blow is an abrupt spike in load, and that is what breaks ordinary bits: the energy reaches the tip and snaps it off.
SHOCK ZONE is a section of the shank with a reduced diameter, designed to twist elastically. It absorbs the blow and returns it like a spring, instead of passing it to the tip. Together with a special heat treatment it gives the bit a property that sounds contradictory for hardened steel: it flexes rather than breaks.
The 25 mm length
25 mm is the short "insert" standard. The bit goes into a magnetic holder or straight into the impact driver's chuck. The advantage of the short length is stability: the shorter the bit, the less runout at the tip and the more accurately it seats in the recess.
Making them last
Most bits do not wear out - they break from bad technique. Three rules cover almost everything: hold the machine square to the screw axis - angled load concentrates in one corner of the tip; release the trigger the moment the head seats - every further blow only fatigues the bit; and never work a chewed-out recess - there the bit spins in the void, heats up and wears out in minutes.
Technical specifications
ManufacturerMilwaukee
Article number4932500384
RangeSHOCKWAVE Impact Duty
RecessHex 10 mm
Length25 mm
Fitting1/4" hex
TechnologySHOCK ZONE geometry
Quantity1 piece
For machinesImpact drivers and drill drivers
Questions and Answers
What recess does the bit have?
Hex 10 mm, 25 mm long, with a 1/4" hex fitting.
What does SHOCK ZONE do?
It is a reduced-diameter section of the shank that twists elastically and absorbs the blow like a spring instead of passing it to the tip. With the special heat treatment the bit flexes rather than breaks.
Why does an impact driver need a special bit?
Because an impact driver delivers torque in blows, hundreds of times a minute. Each blow is an abrupt load spike, and that is exactly what snaps the tip off an ordinary bit.
Does it work in an ordinary drill driver?
Yes - the fitting is a standard 1/4" hex. The bit runs in both types of machine; the impact rating simply is not fully used in a machine without impact.
Why only 25 mm long?
That is the short "insert" standard. The shorter the bit, the less runout at the tip and the more accurately it seats. For extra reach, use a magnetic holder.
How do I stop breaking bits?
Three rules: machine square to the screw axis, release the trigger as the head seats, and never work a chewed-out recess - there the bit spins in the void and wears out in minutes.
Is a holder needed?
Not necessarily - the bit goes straight into the impact driver chuck. A magnetic holder does, however, also hold the screw while you place it one-handed, which at height often decides the job.
..
4.58€
Ex Tax:3.82€
Brand: Milwaukee
Stock: In Stock
Milwaukee SHOCKWAVE Impact Bit Hex 4 mm, 25 mm, 4932500380
Milwaukee 4932500380 is an impact bit from the SHOCKWAVE Impact Duty range in Hex 4 mm, 25 mm long. The fitting is a 1/4" hex and the pack contains 3 pieces per pack.
The Hex 4 mm recess
4 mm hex is the size for furniture bolts, confirmat screws and socket-head machine screws. It is also the one most used in furniture assembly and in bolting steel structures with M5-M6 fasteners.
What SHOCK ZONE is
An impact driver does not deliver torque smoothly - it delivers it in blows, hundreds of times a minute. Each blow is an abrupt spike in load, and that is what breaks ordinary bits: the energy reaches the tip and snaps it off.
SHOCK ZONE is a section of the shank with a reduced diameter, designed to twist elastically. It absorbs the blow and returns it like a spring, instead of passing it to the tip. Together with a special heat treatment it gives the bit a property that sounds contradictory for hardened steel: it flexes rather than breaks.
The 25 mm length
25 mm is the short "insert" standard. The bit goes into a magnetic holder or straight into the impact driver's chuck. The advantage of the short length is stability: the shorter the bit, the less runout at the tip and the more accurately it seats in the recess.
Making them last
Most bits do not wear out - they break from bad technique. Three rules cover almost everything: hold the machine square to the screw axis - angled load concentrates in one corner of the tip; release the trigger the moment the head seats - every further blow only fatigues the bit; and never work a chewed-out recess - there the bit spins in the void, heats up and wears out in minutes.
Technical specifications
ManufacturerMilwaukee
Article number4932500380
RangeSHOCKWAVE Impact Duty
RecessHex 4 mm
Length25 mm
Fitting1/4" hex
TechnologySHOCK ZONE geometry
Quantity3 pieces
For machinesImpact drivers and drill drivers
Questions and Answers
What recess does the bit have?
Hex 4 mm, 25 mm long, with a 1/4" hex fitting.
What does SHOCK ZONE do?
It is a reduced-diameter section of the shank that twists elastically and absorbs the blow like a spring instead of passing it to the tip. With the special heat treatment the bit flexes rather than breaks.
Why does an impact driver need a special bit?
Because an impact driver delivers torque in blows, hundreds of times a minute. Each blow is an abrupt load spike, and that is exactly what snaps the tip off an ordinary bit.
Does it work in an ordinary drill driver?
Yes - the fitting is a standard 1/4" hex. The bit runs in both types of machine; the impact rating simply is not fully used in a machine without impact.
Why only 25 mm long?
That is the short "insert" standard. The shorter the bit, the less runout at the tip and the more accurately it seats. For extra reach, use a magnetic holder.
How do I stop breaking bits?
Three rules: machine square to the screw axis, release the trigger as the head seats, and never work a chewed-out recess - there the bit spins in the void and wears out in minutes.
Is a holder needed?
Not necessarily - the bit goes straight into the impact driver chuck. A magnetic holder does, however, also hold the screw while you place it one-handed, which at height often decides the job.
..
3.53€
Ex Tax:2.94€
Brand: Milwaukee
Stock: In Stock
Milwaukee SHOCKWAVE Impact Bit Hex 8 mm, 25 mm, 4932500383
Milwaukee 4932500383 is an impact bit from the SHOCKWAVE Impact Duty range in Hex 8 mm, 25 mm long. The fitting is a 1/4" hex and the pack contains a single bit.
The Hex 8 mm recess
8 mm hex is the large size - for M10 bolts, structural connections and machine components with a socket head. On such bolts a hand key takes time; with an impact driver and this bit the job goes several times faster.
What SHOCK ZONE is
An impact driver does not deliver torque smoothly - it delivers it in blows, hundreds of times a minute. Each blow is an abrupt spike in load, and that is what breaks ordinary bits: the energy reaches the tip and snaps it off.
SHOCK ZONE is a section of the shank with a reduced diameter, designed to twist elastically. It absorbs the blow and returns it like a spring, instead of passing it to the tip. Together with a special heat treatment it gives the bit a property that sounds contradictory for hardened steel: it flexes rather than breaks.
The 25 mm length
25 mm is the short "insert" standard. The bit goes into a magnetic holder or straight into the impact driver's chuck. The advantage of the short length is stability: the shorter the bit, the less runout at the tip and the more accurately it seats in the recess.
Making them last
Most bits do not wear out - they break from bad technique. Three rules cover almost everything: hold the machine square to the screw axis - angled load concentrates in one corner of the tip; release the trigger the moment the head seats - every further blow only fatigues the bit; and never work a chewed-out recess - there the bit spins in the void, heats up and wears out in minutes.
Technical specifications
ManufacturerMilwaukee
Article number4932500383
RangeSHOCKWAVE Impact Duty
RecessHex 8 mm
Length25 mm
Fitting1/4" hex
TechnologySHOCK ZONE geometry
Quantity1 piece
For machinesImpact drivers and drill drivers
Questions and Answers
What recess does the bit have?
Hex 8 mm, 25 mm long, with a 1/4" hex fitting.
What does SHOCK ZONE do?
It is a reduced-diameter section of the shank that twists elastically and absorbs the blow like a spring instead of passing it to the tip. With the special heat treatment the bit flexes rather than breaks.
Why does an impact driver need a special bit?
Because an impact driver delivers torque in blows, hundreds of times a minute. Each blow is an abrupt load spike, and that is exactly what snaps the tip off an ordinary bit.
Does it work in an ordinary drill driver?
Yes - the fitting is a standard 1/4" hex. The bit runs in both types of machine; the impact rating simply is not fully used in a machine without impact.
Why only 25 mm long?
That is the short "insert" standard. The shorter the bit, the less runout at the tip and the more accurately it seats. For extra reach, use a magnetic holder.
How do I stop breaking bits?
Three rules: machine square to the screw axis, release the trigger as the head seats, and never work a chewed-out recess - there the bit spins in the void and wears out in minutes.
Is a holder needed?
Not necessarily - the bit goes straight into the impact driver chuck. A magnetic holder does, however, also hold the screw while you place it one-handed, which at height often decides the job.
..
4.52€
Ex Tax:3.77€
Brand: Milwaukee
Stock: In Stock
Milwaukee SHOCKWAVE Impact Bit PH3, 25 mm, 4932500354
Milwaukee 4932500354 is an impact bit from the SHOCKWAVE Impact Duty range in PH3, 25 mm long. The fitting is a 1/4" hex and the pack contains 3 pieces per pack.
The PH3 recess
PH3 is the large cross-head size. It appears on bigger timber and sheet-metal screws, where PH2 already slips in the recess. If a PH2 bit cams out and chews the head, the usual reason is that the screw wants PH3.
What SHOCK ZONE is
An impact driver does not deliver torque smoothly - it delivers it in blows, hundreds of times a minute. Each blow is an abrupt spike in load, and that is what breaks ordinary bits: the energy reaches the tip and snaps it off.
SHOCK ZONE is a section of the shank with a reduced diameter, designed to twist elastically. It absorbs the blow and returns it like a spring, instead of passing it to the tip. Together with a special heat treatment it gives the bit a property that sounds contradictory for hardened steel: it flexes rather than breaks.
The 25 mm length
25 mm is the short "insert" standard. The bit goes into a magnetic holder or straight into the impact driver's chuck. The advantage of the short length is stability: the shorter the bit, the less runout at the tip and the more accurately it seats in the recess.
Making them last
Most bits do not wear out - they break from bad technique. Three rules cover almost everything: hold the machine square to the screw axis - angled load concentrates in one corner of the tip; release the trigger the moment the head seats - every further blow only fatigues the bit; and never work a chewed-out recess - there the bit spins in the void, heats up and wears out in minutes.
Technical specifications
ManufacturerMilwaukee
Article number4932500354
RangeSHOCKWAVE Impact Duty
RecessPH3
Length25 mm
Fitting1/4" hex
TechnologySHOCK ZONE geometry
Quantity3 pieces
For machinesImpact drivers and drill drivers
Questions and Answers
What recess does the bit have?
PH3, 25 mm long, with a 1/4" hex fitting.
What does SHOCK ZONE do?
It is a reduced-diameter section of the shank that twists elastically and absorbs the blow like a spring instead of passing it to the tip. With the special heat treatment the bit flexes rather than breaks.
Why does an impact driver need a special bit?
Because an impact driver delivers torque in blows, hundreds of times a minute. Each blow is an abrupt load spike, and that is exactly what snaps the tip off an ordinary bit.
Does it work in an ordinary drill driver?
Yes - the fitting is a standard 1/4" hex. The bit runs in both types of machine; the impact rating simply is not fully used in a machine without impact.
Why only 25 mm long?
That is the short "insert" standard. The shorter the bit, the less runout at the tip and the more accurately it seats. For extra reach, use a magnetic holder.
How do I stop breaking bits?
Three rules: machine square to the screw axis, release the trigger as the head seats, and never work a chewed-out recess - there the bit spins in the void and wears out in minutes.
Is a holder needed?
Not necessarily - the bit goes straight into the impact driver chuck. A magnetic holder does, however, also hold the screw while you place it one-handed, which at height often decides the job.
..
2.68€
Ex Tax:2.23€
Brand: Milwaukee
Stock: In Stock
Milwaukee SHOCKWAVE Impact Bit SL 0.8 x 5.5 mm, 25 mm, 4932500387
Milwaukee 4932500387 is an impact bit from the SHOCKWAVE Impact Duty range in SL 0.8 x 5.5 mm, 25 mm long. The fitting is a 1/4" hex and the pack contains 3 pieces per pack.
The SL 0.8 x 5.5 mm recess
The slotted recess today turns up mainly on electrical terminals, older screws and ironmongery. The 0.8 x 5.5 mm size is the middle one - exactly what sits in terminal blocks and junction boxes.
What SHOCK ZONE is
An impact driver does not deliver torque smoothly - it delivers it in blows, hundreds of times a minute. Each blow is an abrupt spike in load, and that is what breaks ordinary bits: the energy reaches the tip and snaps it off.
SHOCK ZONE is a section of the shank with a reduced diameter, designed to twist elastically. It absorbs the blow and returns it like a spring, instead of passing it to the tip. Together with a special heat treatment it gives the bit a property that sounds contradictory for hardened steel: it flexes rather than breaks.
The 25 mm length
25 mm is the short "insert" standard. The bit goes into a magnetic holder or straight into the impact driver's chuck. The advantage of the short length is stability: the shorter the bit, the less runout at the tip and the more accurately it seats in the recess.
Making them last
Most bits do not wear out - they break from bad technique. Three rules cover almost everything: hold the machine square to the screw axis - angled load concentrates in one corner of the tip; release the trigger the moment the head seats - every further blow only fatigues the bit; and never work a chewed-out recess - there the bit spins in the void, heats up and wears out in minutes.
Technical specifications
ManufacturerMilwaukee
Article number4932500387
RangeSHOCKWAVE Impact Duty
RecessSL 0.8 x 5.5 mm
Length25 mm
Fitting1/4" hex
TechnologySHOCK ZONE geometry
Quantity3 pieces
For machinesImpact drivers and drill drivers
Questions and Answers
What recess does the bit have?
SL 0.8 x 5.5 mm, 25 mm long, with a 1/4" hex fitting.
What does SHOCK ZONE do?
It is a reduced-diameter section of the shank that twists elastically and absorbs the blow like a spring instead of passing it to the tip. With the special heat treatment the bit flexes rather than breaks.
Why does an impact driver need a special bit?
Because an impact driver delivers torque in blows, hundreds of times a minute. Each blow is an abrupt load spike, and that is exactly what snaps the tip off an ordinary bit.
Does it work in an ordinary drill driver?
Yes - the fitting is a standard 1/4" hex. The bit runs in both types of machine; the impact rating simply is not fully used in a machine without impact.
Why only 25 mm long?
That is the short "insert" standard. The shorter the bit, the less runout at the tip and the more accurately it seats. For extra reach, use a magnetic holder.
How do I stop breaking bits?
Three rules: machine square to the screw axis, release the trigger as the head seats, and never work a chewed-out recess - there the bit spins in the void and wears out in minutes.
Is a holder needed?
Not necessarily - the bit goes straight into the impact driver chuck. A magnetic holder does, however, also hold the screw while you place it one-handed, which at height often decides the job.
..
4.68€
Ex Tax:3.90€
Brand: Milwaukee
Stock: In Stock
Milwaukee SHOCKWAVE Impact Bit SL 1.2 x 6.5 mm, 25 mm, 4932500388
Milwaukee 4932500388 is an impact bit from the SHOCKWAVE Impact Duty range in SL 1.2 x 6.5 mm, 25 mm long. The fitting is a 1/4" hex and the pack contains 3 pieces per pack.
The SL 1.2 x 6.5 mm recess
The 1.2 x 6.5 mm size is the large slotted recess - for slotted wood screws, gearbox covers, old hinges and ironmongery, where a thin bit simply jumps out of the slot.
What SHOCK ZONE is
An impact driver does not deliver torque smoothly - it delivers it in blows, hundreds of times a minute. Each blow is an abrupt spike in load, and that is what breaks ordinary bits: the energy reaches the tip and snaps it off.
SHOCK ZONE is a section of the shank with a reduced diameter, designed to twist elastically. It absorbs the blow and returns it like a spring, instead of passing it to the tip. Together with a special heat treatment it gives the bit a property that sounds contradictory for hardened steel: it flexes rather than breaks.
The 25 mm length
25 mm is the short "insert" standard. The bit goes into a magnetic holder or straight into the impact driver's chuck. The advantage of the short length is stability: the shorter the bit, the less runout at the tip and the more accurately it seats in the recess.
Making them last
Most bits do not wear out - they break from bad technique. Three rules cover almost everything: hold the machine square to the screw axis - angled load concentrates in one corner of the tip; release the trigger the moment the head seats - every further blow only fatigues the bit; and never work a chewed-out recess - there the bit spins in the void, heats up and wears out in minutes.
Technical specifications
ManufacturerMilwaukee
Article number4932500388
RangeSHOCKWAVE Impact Duty
RecessSL 1.2 x 6.5 mm
Length25 mm
Fitting1/4" hex
TechnologySHOCK ZONE geometry
Quantity3 pieces
For machinesImpact drivers and drill drivers
Questions and Answers
What recess does the bit have?
SL 1.2 x 6.5 mm, 25 mm long, with a 1/4" hex fitting.
What does SHOCK ZONE do?
It is a reduced-diameter section of the shank that twists elastically and absorbs the blow like a spring instead of passing it to the tip. With the special heat treatment the bit flexes rather than breaks.
Why does an impact driver need a special bit?
Because an impact driver delivers torque in blows, hundreds of times a minute. Each blow is an abrupt load spike, and that is exactly what snaps the tip off an ordinary bit.
Does it work in an ordinary drill driver?
Yes - the fitting is a standard 1/4" hex. The bit runs in both types of machine; the impact rating simply is not fully used in a machine without impact.
Why only 25 mm long?
That is the short "insert" standard. The shorter the bit, the less runout at the tip and the more accurately it seats. For extra reach, use a magnetic holder.
How do I stop breaking bits?
Three rules: machine square to the screw axis, release the trigger as the head seats, and never work a chewed-out recess - there the bit spins in the void and wears out in minutes.
Is a holder needed?
Not necessarily - the bit goes straight into the impact driver chuck. A magnetic holder does, however, also hold the screw while you place it one-handed, which at height often decides the job.
..
3.58€
Ex Tax:2.98€