Rechargeable tools set - Page 2

The Dewalt DCK2062D2T brushless screwdriver set includes:1. DeWalt DCD709 Cordless Impact DriverAdvantages:Equipped with innovative brushless motor technology and a 2-speed all-metal gearbox.Operates at speeds of 0-450/0-1650 rpm and features 15-stage adjustable torque up to 65 Nm.Protective electronics constantly monitor the battery temperature.The chuck is 13 mm, made of hard metal with center jaws and automatic spindle lock.15-position adjustable torque control ensures consistent performance when driving screws into a wide range of materials and with different screw sizes.A powerful, ultra-bright LED light ensures trouble-free operation.Technical specifications:Voltage: 18 VBattery type: Li-ionBuilt-in work light: LEDChuck capacity: 1.5-13 mmMax. torque: 65 NmMax. drilling (masonry): 10 mmMax. drilling (steel): 10 mmMax. drilling (wood): 40 mmMax. impact rate: 0-28,050 min-1Max. speed in 1st gear: 0 - 450 rpmMax. speed in 2nd gear: 0 - 1,650 rpmSound pressure level: 89 dB(A)Reverse: YESBrushless motor: YESHammer drill mode: YESDimensions (L x W x H): 152 x 65 x 175 mmWeight: 2 kg2. DeWalt DCF809 Cordless Impact WrenchAdvantages:Features a powerful brushless motor that extends the tool's lifespanSuper compact with a length of only 130 mmTriple LED light for comfortable work in dark areasErgonomic rubberized grip for reduced fatigue during prolonged useTechnical Specifications:Voltage: 18 VPower: 280 WBattery type: Li-ionBuilt-in work light: LEDMaximum torque: 190 NmMaximum RPM: 0 - 2800 min-1Impacts per minute: 0 - 3200 min-1Brushless motor: YESHammer drill mode: YESDimensions (L x W x H): 125 x 70 x 225 mmWeight: 1.5 kg3. Belt clips - 2 pcs 4. 2.0Ah batteries - 2 pcs 5. DCB112 charger - 1 pc 6. TSTAK Case - 1 pc..

Dewalt DCK2062E2T 18V Brushless Screwdriver Set The Dewalt DCK2062L2T set is a practical and convenient solution for every DIYer. The high-efficiency brushless motors ensure longer runtime without recharging the battery. The absence of wear-and-tear parts (brushes) increases the overall lifespan of the tools. The set consists of a DeWalt DCD709 cordless impact driver, a DeWalt DCF809 cordless impact driver , a charger, and two 1.7Ah rechargeable batteries. All of this is packed in a plastic case that is convenient for storing and transporting the tools and is compatible with the DeWalt TSTAK II system. 1. DeWalt DCD709 Cordless Impact DriverVoltage: 18 V;Battery type: Li-ion;Brushless motor: YES;Hammer drill mode: YES;Built-in work light: LED;Chuck capacity: 1.5-13 mm;Max. torque: 65 Nm;Max. drilling capacity (masonry): 10 mm;Max. drilling capacity (steel): 10 mm;Max. drilling (wood): 40 mm;Max. impact rate: 0-28,050 bpm;Max. speed in 1st gear: 0-450 rpm;Max. speed in 2nd gear: 0-1,650 rpm;Sound pressure level: 89 dB(A);Reverse: YES;Dimensions (L x W x H): 152 x 65 x 175 mm;Weight: 2 kg.2. DeWalt DCF809 Cordless Impact DriverVoltage: 18 V;Power: 280 W;Battery type: Li-ion;Brushless motor: YES;Hammer drill mode: YES;Built-in work light: LED;Max. torque: 190 Nm;Max. RPM: 0 - 2800 rpm;Blows per minute: 0-3,200;Dimensions (L x W x H): 125 x 70 x 225 mm;Weight: 1.5 kgThe set includes:Tool: DeWalt DCD709 Cordless Impact Driver;Tool: DeWalt DCF809 cordless impact driver;DeWalt Power Stack 1.7 Ah rechargeable batteries: 2 pcsCharger: 1 pcTSTAK storage and carrying case: 1 pc...

The DeWalt DCK2111NT cordless tool set includesCOMES IN A CASE, WITHOUT A CHARGER OR BATTERIES!1. DEWALT DCD710 Cordless ScrewdriverAdvantages:The DCD710D2 2-speed cordless screwdriver operates on Li-Ion rechargeable batteries.Compact and lightweight design.Ergonomic, rubber-coated grip for maximum user comfort during drilling.Features a switch for greater speed control while operating the tool.Technical specifications:Voltage: 12 VBattery capacity: 2.0 AhBattery type: XR Li-ionCharging time: 60 minMechanical speeds: 2No-load speed (1st speed): 0 - 400 rpmNo-load speed (2nd speed): 0 - 1500 rpmQuick-release chuck: 1.0 - 10 mmMaximum drilling diameter in steel: 10 mmMaximum drilling diameter in wood: 20 mmTorque settings: 18 + DMaximum torque (hard): 24 NmMaximum torque (soft): 15 NmLighting: LEDNoise level: 65 dBDimensions (L x W x H): 185 x 65 x 195 mmWeight: 1.111 kg2. DEWALT DCF815 Cordless Impact WrenchAdvantages:Compact and durable design.LED lighting.Aluminum front housing provides better heat dissipation, extending the motor's life.Technical specifications:Voltage: 12 VBattery capacity: 2.0 AhBattery type: Li-IonCharging time: 60 minElectric speeds: 1No-load speed: 0 - 2450 rpmNo-load impact rate: 0 - 3400 min-1Standard bolts: M10High-strength bolts: -Chuck size: 1/4" (hex)Maximum torque: 107 NmLighting: LEDNoise: 88 dBDimensions (L x W x H): 158 x - x 195 mmWeight: 1.04 kg3. Case..

DeWalt DCK2224MP2T-QW Cordless Impact Twin Kit, McLaren F1 XR, 18 V The DeWalt DCK2224MP2T-QW is a twin kit from the limited McLaren F1 Team edition, pairing the DCF86M impact driver with the compact DCF92M impact wrench. Both machines have brushless motors and cover the two main kinds of impact fastening - with bits and with sockets. DCF86M impact driver A tool with a 1/4" hex drive and a maximum torque of 206 Nm. It has three electronic speeds - 0 - 1000, 0 - 2800 and 0 - 3250 rpm - letting you start a screw gently and finish at full speed. Impacts reach 3800 per minute and it weighs just 0.95 kg. DCF92M impact wrench A compact wrench with a 1/2" square drive delivering 406 Nm of fastening torque and 610 Nm when loosening, at a weight of only 1.1 kg. Speed reaches 2500 rpm and impacts 3550 per minute. The torque-to-size ratio makes it suitable for tight spaces where a full-size wrench will not turn. The two machines together The combination is aimed at vehicle workshops, steel-frame assembly, plant maintenance and mobile crews. The driver handles screws and self-tapping fixings while the wrench takes the bolted joints. Both are light, which matters when working overhead or for long periods in an awkward position. Brushless motors Removing the carbon brushes removes the main wearing element in the motor. The result is higher efficiency, more work done per charge, a lower running temperature and longer life under daily load - significant on machines that work by impact. Power and storage The kit includes two DCB184 18 V / 5.0 Ah batteries and a DCB1104 4 A fast charger. The machines stow in a TSTAK case in the special McLaren F1 Team livery, which stacks with the rest of the storage system. Belt hooks are included. Technical specifications SpecificationDCF86M - impact driverDCF92M - impact wrench Voltage18 V XR18 V XR MotorBrushlessBrushless Drive1/4" hex1/2" square Maximum torque206 Nm406 Nm Loosening torque-610 Nm No load speed0 - 1000 / 2800 / 3250 rpmup to 2500 rpm Impacts per minuteup to 3800up to 3550 Speeds3 electronic- Weight0.95 kg1.1 kg What's in the box 1 x DeWalt DCF86M impact driver 1 x DeWalt DCF92M impact wrench 2 x DeWalt DCB184 batteries, 18 V / 5.0 Ah 1 x DeWalt DCB1104 fast charger, 4 A 2 x belt hooks 1 x TSTAK case, McLaren F1 Team Questions and Answers What is the difference between an impact driver and an impact wrench? The DCF86M impact driver takes 1/4" hex bits and is made for screws and self-tapping fixings. The DCF92M wrench has a 1/2" square drive for sockets and delivers roughly twice the torque - it is for bolted joints. The two are not interchangeable, which is exactly why they are kitted together. How much torque does the DCF92M wrench produce? 406 Nm when fastening and 610 Nm when loosening, at a weight of only 1.1 kg. That is a high figure for such a compact machine and allows work on bolts that would normally call for a considerably larger wrench. Why does the driver have three speeds? For control across different materials. First speed at up to 1000 rpm lets you start a screw carefully without damaging the head or the workpiece, while third at up to 3250 rpm finishes quickly. In softwood or thin sheet metal the low setting guards against stripping. Do the batteries work with other DeWalt tools? Yes. The DCB184 are standard 18 V XR Li-Ion packs and power the whole platform, whether the tool is from the McLaren range or the usual yellow-and-black line. Your existing XR packs will also run both machines in this kit. What is special about the McLaren F1 Team edition? It is a limited edition from DeWalt's partnership with the McLaren Formula 1 team. The machines come in black with orange accents rather than the standard yellow. Technically they belong to the professional XR range - the difference is the livery and the edition, not the specification. Is the kit suitable for a vehicle workshop? Yes, that is one of its main applications. The compact 1/2" wrench handles most bolted joints on a vehicle, and the low weight and size allow work in the engine bay and under the car. For wheel bolts we recommend doing the final tightening with a torque wrench. What charger is included? A DCB1104 fast charger rated at 4 A, which charges the 5.0 Ah packs considerably faster than standard lower-current chargers. It supports the full range of DeWalt XR platform batteries. ..

DeWALT DCK305P2T 18V Cordless Brushless Tool Set The DeWALT DCK305P2T is a set consisting of 3 cordless, brushless 18V tools, 2 tool cases, a charger, and 2 x 5.0Ah Li-Ion batteries. They are suitable for any type of professional engaged in activities such as drilling, chiseling, screwing, sanding, cutting, and more. 1. DeWALT DCF887N Cordless Screwdriver / Impact Driver, Hammer, Brushless, 18V, 205Nm • Brushless motor: yes • Torque: 205.00 Nm • Number of speeds: 3 • No-load speed: 0-3250 rpm • Built-in work light: yes • Impact: yes • Impact rate: 3800 min-1 • Chuck: 1/4 • Reverse: yes • Series: XR • Weight: 0.90 kg 2. DeWALT DCG405N Cordless Brushless Angle Grinder, 18V, 125mm • Soft start • Brushless motor • Overload protection • Anti-vibration system • Restart protection • Powerful and highly efficient cooling fan • Adjustable handle for greater comfort and control • Side-mounted spindle lock button • No-load speed: 9000 rpm • Grinding disc diameter: 125 mm • Spindle thread: M 14 • Dimensions (length): 310 mm • Weight: 1.75 kg 4. DeWALT DCH273N 18V Cordless Brushless Hammer Drill• Maximum in concrete: 24.00 mm • Chuck: SDS plus • Hammering: yes • Reverse: yes • Impact energy (J): 2.1 J • No-load speed*: 0-1200 rpm • Weight: 3.00 kg The set includes:1 x DeWALT DCF887N Cordless Impact Driver, Impact, Brushless, 18V, 205 Nm;1 x DeWALT DCG405N Cordless Brushless Angle Grinder, 18V, 125mm;1 x DeWALT DCH273N Cordless Brushless Hammer Drill, 18V;2 x DeWALT DCB184 battery, 18V, 5Ah Li-Ion;1 x DeWALT DCB115 charger;2 x Storage and transport case...

DeWalt DCK3222MP2T-QW Cordless Combo Kit, McLaren F1 XR, 18 V The DeWalt DCK3222MP2T-QW is a set of three brushless machines from the limited McLaren F1 Team edition - the DCD86M combi drill, the DCF99M impact wrench and the DCG45M angle grinder. It ships with two 18 V / 5.0 Ah batteries, a fast charger and a TSTAK case in the range's distinctive black-and-orange finish. DCD86M combi drill A compact machine weighing just 1.34 kg without a battery, delivering 90 Nm in hard joints and 27 Nm in soft ones. The two-speed gearbox runs at 0 - 650 and 0 - 2000 rpm, and the 14-stage clutch allows precise control when driving screws. The keyless chuck takes 1.5 - 13 mm and there is a hammer mode for masonry. DCF99M impact wrench The most powerful machine in the kit. With a 1/2" square drive it produces 1396 Nm of fastening torque and 1898 Nm when loosening - enough for heavily torqued bolts in steelwork, plant machinery and vehicle servicing. It offers four working modes and speeds up to 2300 rpm. DCG45M angle grinder An angle grinder for Ø 125 mm discs running at 9000 rpm with an M14 spindle, weighing 1.89 kg. Supplied with a snap-lock cutting guard, a grinding guard, a side handle and a disc wrench. Who it is for The three machines together cover assembly, dismantling and cutting from one battery type. The kit suits vehicle workshops and mobile technicians, steel-frame and scaffolding fitters, and industrial maintenance work where driving large bolts, drilling and cutting profiles alternate. A shared platform means fewer chargers and fewer spare packs in the van. Brushless motors All three machines have brushless motors. Removing the carbon brushes removes the main wearing part in the motor, which gives higher efficiency, a lower running temperature and longer life under daily load. Power and storage The three machines run on two 18 V XR batteries of 5.0 Ah and charge from the supplied fast charger. Everything stows in a TSTAK case in the special McLaren F1 Team livery, which stacks with the rest of the storage system. Technical specifications SpecificationDCD86MDCF99MDCG45M Machine typeCombi drillImpact wrenchAngle grinder Voltage18 V XR18 V XR18 V XR MotorBrushlessBrushlessBrushless Torque90 / 27 Nm (hard/soft)1396 Nm fastening / 1898 Nm loosening- Speed0 - 650 / 0 - 2000 rpmup to 2300 rpm9000 rpm DriveChuck 1.5 - 13 mm1/2" squareM14 spindle, Ø 125 mm disc Settings14 + drill and hammer4 modes- Weight1.34 kg2.9 kg1.89 kg What's in the box 1 x DeWalt DCD86M combi drill 1 x DeWalt DCF99M impact wrench 1 x DeWalt DCG45M angle grinder, Ø 125 mm 2 x 18 V XR batteries, 5.0 Ah 1 x fast charger Snap-lock cutting guard and grinding guard Side handle, belt hook and disc wrench 1 x TSTAK case, McLaren F1 Team Questions and Answers Which machines are in the DCK3222MP2T-QW kit? Three brushless machines - the DCD86M combi drill, the DCF99M impact wrench with a 1/2" square drive and the DCG45M angle grinder for 125 mm discs. They come with two 18 V / 5.0 Ah batteries, a fast charger, guards, a side handle and a TSTAK case. How powerful is the DCF99M wrench? Maximum fastening torque is 1396 Nm and loosening torque reaches 1898 Nm. That is among the highest figures in the 18 V cordless class and allows heavily torqued or corroded bolted joints to be freed without an air line and compressor. What is special about the McLaren F1 Team edition? It is a limited edition created through DeWalt's partnership with the McLaren Formula 1 team. The machines come in a distinctive black finish with orange accents instead of the usual yellow. Technically they are from the professional XR range - the difference is in the livery and the edition, not a compromise on performance. Do the batteries work with other DeWalt tools? Yes. The batteries are standard 18 V XR Li-Ion and power the whole platform, whether the tool is from the McLaren range or the usual yellow-and-black line. If you already own XR packs, they will run all three machines in this kit. Can the DCD86M drill into concrete? The machine has a hammer mode and copes with lighter drilling in masonry and brick. For routine work in concrete and for anchor holes, an SDS-Plus rotary hammer is the better choice, as it delivers impact energy on a different principle. What discs does the DCG45M grinder take? Discs of 125 mm diameter with an M14 spindle - the standard size for this class of machine. Separate guards for cutting and grinding are included, and the cutting guard has a snap lock so it can be changed without tools. Are two batteries enough for three machines? For normal work, yes - three machines are rarely used at once and 5.0 Ah gives long runtime. For sustained use of the wrench or the grinder, which draw the most current, adding a thi..

The DeWALT DCK384P2T cordless tool set includes:1. DEWALT DCD796 Cordless Impact Driver Advantages:Latest-generation 18 V XR Li-Ion compact DeWALT impact driver equipped with a new XR Li-Ion battery.Ultra-compact and lightweight design, allowing for use in tight spaces.Two-speed all-metal gearbox for more intensive operation and longer tool life.15 torque settings for optimal precision in screwdriver mode.Intelligent trigger design allows for complete control over applications.Compact 13 mm keyless chuck with a single sleeve and automatic spindle lock for quick and easy one-handed bit changes.Bright white LED lights with a delay function for improved visibility and functionality.Improved ergonomic design and rubberized grip for greater comfort.Li-Ion slide-in battery for easy insertion and removal.Steel belt clip and sturdy magnetic bit holder for easy storage.Technical specifications:Voltage: 18 VBattery type: Li-ionMechanical speeds: 2No-load speed, 1st speed: 0 - 550 min-1No-load speed, 2nd speed: 0 - 2000 rpmQuick-release chuck: 1.5 - 13 mmMaximum drilling diameter in steel: 13 mmMaximum drilling diameter in wood: 40 mmMaximum drilling diameter in concrete: 13 mmImpacts per minute: 0 - 34,000 min-1Torque settings: 15Maximum torque (hard): 70 NmMaximum torque/soft: 27 NmLighting: LEDNoise: 89 dBDimensions (L x W x H): 203 x 67 x 190 mmWeight: 1.8 kg2. DEWALT DCF887N Cordless Impact Wrench Advantages:Aluminum housing provides better heat dissipation.Built-in overload protection 6.35 mm keyless hex chuck for quick and easy bit changes.Electronic motor brake.Work area lighting.Technical Specifications:Voltage: 18 VBattery type: Li-ionMechanical speeds: 3No-load speed, 1st speed: 0 - 1000 rpmNo-load speed, 2nd speed: 0 - 2800 rpmNo-load speed, 3rd speed: 0 - 3250 rpmBlows per minute: 0 - 3800 min-1Chuck size: 1/4''Screw size: M4 - M8Standard bolts: M5 - M14High-strength bolts: M5 - M12Maximum torque: 205 NmLighting: LEDNoise: 96 dBDimensions (L x W x H): 134 x 67 x 195 mmWeight: 0.94 kg3. DeWALT DCG405N Cordless Angle Grinder Advantages:Features the new XR Lithium-Ion Technology, which ensures long battery life and high power.Ideal for fast cutting and grinding, thanks to the powerful cooling fan and brushless motor.The tool's soft start ensures greater control when starting the angle grinder.Features motor overload protection and an anti-vibration system for greater comfort and reduced user fatigue.The restart protection ensures that the tool will not accidentally turn on after a power interruption.A side-mounted spindle lock button allows for easy and quick changing of tool accessories.Technical specifications:Voltage: 18 VBattery type: Li-ionNo-load speed: 9000 rpmDisc diameter: 125 mmBore size: 22.23 mmSpindle size: M14Lighting: NoNoise level: 85 dBDimensions (L x W x H): 315 x 255 x 115 mmWeight: 1.761 kg4. 5.0Ah Battery DCB184 - 2 pcs 5. DCB115 Quick Charger - 1 pc 6. T STAKTM-Box II DWST1-70705 Case - 2 pcs..

The Dewalt DCK422P3T cordless tool set includes 4 brushless 18V tools, two tool cases, a charger, and 3 x 5.0Ah Li-Ion batteries. They are suitable for any type of professional engaged in activities such as drilling, chiseling, screwing, sanding, cutting, and more. 1. DeWalt DCD795N Cordless Brushless Impact Driver, 18V, 70 Nm• Torque: 70.00 Nm • Brushless motor: yes • No-load speed: 550-2000 rpm • Impact rate: 9350-34000 bpm • Built-in work light: yes • Maximum in wood: 40.00 mm • Maximum in metal: 13.00 mm • Chuck capacity: 1.5-13 mm • Reverse: yes • Series: XR • Weight: 1.80 kg 2. DeWALT DCF887N Cordless Screwdriver / Impact Driver, Impact, Brushless, 18V, 205 Nm• Brushless motor: Yes • Torque: 205.00 Nm • Number of speeds: 3 • No-load speed: 0-3250 rpm • Built-in work light: Yes • Impact: Yes • Impact rate: 3800 min-1 • Chuck: 1/4 • Reverse: yes • Series: XR • Weight: 0.90 kg 3. DeWALT DCG405N Cordless Brushless Angle Grinder, 18V, 125mm • Soft start • Brushless motor • Overload protection • Anti-vibration system • Restart protection • Powerful and highly efficient cooling fan • Adjustable handle for greater comfort and control • Side-mounted spindle lock button • No-load speed: 9000 rpm • Grinding disc diameter: 125 mm • Spindle thread: M 14 • Dimensions (length): 310 mm • Weight: 1.75 kg 4. DeWALT DCH273N 18V Cordless Brushless Hammer Drill • Maximum drilling capacity in concrete: 24.00 mm • Chuck: SDS plus • Hammering: yes • Reverse: yes • Impact energy (J): 2.1 J • No-load speed*: 0-1,200 rpm • Weight: 3.00 kg Includes: 3 x DeWALT DCB184 battery, 18V, 5Ah Li-Ion 1 x DeWALT DCB115 charger 2 x Storage and transport case (TSTAK II + TSTAK VI)..

The DeWALT DCK551P3T cordless tool set includes:1. DeWalt DCD796 Cordless ScrewdriverAdvantages:Ultra-compact and lightweight design, allowing for use in tight spacesIntelligent trigger design allows for complete control over applicationsCompact 13mm keyless single-sleeve chuck with automatic spindle lock for quick and easy one-handed bit changesLED lights with delay function for improved visibility and functionalityLi-Ion slide-in battery for easy insertion and removalSteel belt clip and sturdy magnetic bit holder for easy storageTechnical Specifications:Rechargeable battery voltage: 18 VBattery type: Li-ionTorque: 70.00 NmMax. in wood: 40.00 mmMax. in metal: 13.00 mmNo-load speed: 550-2000 rpmImpact rate: 9,350-34,000 bpmChuck range: 1.5-13 mmBrushless motor: yes Overload protection: no Constant-speed electronics: no Built-in work light: yes Reverse: yes Weight: 6.32 kgWeight: 1.80 kg2. DEWALT DCF887 Cordless Impact Wrench Advantages:Aluminum housing provides better heat dissipation.Built-in overload protection 6.35 mm keyless hex chuck for quick and easy bit changes.Electronic motor brake.Work area lighting.Technical specifications:Voltage: 18 VBattery type: Li-ionMechanical speeds: 3No-load speed, 1st speed: 0 - 1000 min-1No-load speed, 2nd speed: 0 - 2800 rpmNo-load speed, 3rd speed: 0 - 3250 rpmBlows per minute: 0 - 3800 min-1Chuck size: 1/4''Screw size: M4 - M8Standard bolts: M5 - M14High-strength bolts: M5 - M12Maximum torque: 205 NmLighting: LEDNoise: 96 dBDimensions (L x W x H): 134 x 67 x 195 mmWeight: 0.94 kg3. Dewalt DCS391 Cordless Circular Saw Advantages:Equipped with powerful fans to cool the motor with replaceable brushes.The ergonomic handle is designed to optimize user comfort.An intelligent trigger allows for full control over all applications.The spindle lock facilitates quick and easy blade changes.Electronic motor brake for added control and workplace safety.Technical specifications:Voltage: 18 V;Battery type: Li-ion;Blade diameter: 165 mm;Disc bore: 20 mm;Output power: 460 W;Maximum RPM: 0-3700;Max. cutting depth at 90°: 55 mm;Max. cutting depth at 45°: 42.1 mm;Length x Height: 360 x 240 mm;Weight: 3.8 kg4. DEWALT DCS331 Cordless Jigsaw Advantages:Equipped with state-of-the-art XR Lithium-Ion technology, which ensures high performance and reliability.With a powerful motor featuring built-in cooling and replaceable brushes, this tool offers an impressive cutting speed of up to 3,000 strokes per minute.Features a smooth trigger mechanism for precise control and scratch protection.Additionally, it includes a dust collector adapter to keep the work area clean.Technical specifications:Voltage: 18 VBattery type: Li-IonNo-load speed: 0 - 3000 rpmBlade stroke: 26 mmMaximum cutting depth in wood: 135 mmMaximum cutting depth in metal: 10 mmMaximum cutting depth in aluminum: 25 mmTilt angle: 3 degreesLighting: noNoise level: 89 dBDimensions (L x W x H): 245 x 78 x 220 mmWeight: 2.344 kg5. DeWALT DCL050 Cordless LED Flashlight Advantages:Equipped with a 140° swivel head, allowing the light to be directed in the desired direction.Offers two brightness modes-500 lumens for high brightness and 250 lumens for longer runtime.Three bright LEDs provide effective illumination of dark areas in the workplace.Equipped with a built-in hook for easy hanging.Technical specifications:Voltage: 18 VBattery type: Li-ionLight source: 3 LEDsLuminous flux: 300-500 lmBattery runtime: 10 h (4.0 Ah)Material: plasticApplication: handheldFeature: swivel headProtection class: IP 54Dimensions (L x W x H): 95 x - x 345 mmWeight: 0.680 kg6. DCB184 5.0Ah rechargeable batteries: 3 pcs 7. DeWALT charger: 1 pc 8. TSTAK I case: 1 pc 9. TSTAK VI case: 1 pc..

The DeWALT DCK611P1D2 cordless tool set includes:1. DeWalt DCD701 Cordless Drill/Driver Advantages:The wear-resistant, high-efficiency brushless motor provides long runtime on a single battery charge.The keyless chuck with ratchet and locking spindle allows for one-handed bit changes.Adjustable 15-position clutch for optimal screwdriving precision.The LED light lets you work in low-light conditions.Technical specifications:Voltage: 12 VBattery type: Li-IonMechanical speeds: 2No-load speed, 1st speed: 0-425 min-1No-load speed, 2nd speed: 0 - 1500 rpmQuick-release chuck: 1.5 - 10 mmMaximum drilling diameter in steel: 10 mmMaximum drilling diameter in wood: 20 mmTorque settings: 15Maximum torque: 57.5 NmLighting: LEDNoise level: 83 dBDimensions (L x W x H): 152 x 60 x 185 mmWeight: 0.87 kg2. DeWALT DCF801 Cordless Impact Driver Advantages:Equipped with a brushless motor powered by a 12 V battery, the tool delivers 163 Nm of torqueIt features an LED work light for good visibility of the work area.It features three electronic speed settings, providing greater control, and the precision drive mode is ideal for working with fine screws, protecting the screw head from damageTechnical specifications:Voltage: 12 VBattery type: Li-ionMaximum torque: 163 NmNo-load speed: 0-950/1950/2850 rpmImpact rate: 0-3600 bpmNumber of speeds: 3Weight: 0.9 kg3. DeWALT DCS512 Cordless Circular Saw Advantages:Reliable and durable brushless motor;Extremely durable tool construction;Variable bevel angle adjustment up to 50 degrees;Optimal balance for safe, fatigue-free operation;Lock-on switch and electronic motor brake for added control and safety during operation;Additional handle for safe two-handed operation;Dust fan clears dust and debris from the cutting line;LED work light for improved visibility of the cutting line.Technical specifications:Voltage: 12 V;Battery type: Li-Ion;Disc diameter: 140 mm;Blade bore diameter: 20 mm;Bevel angle: up to 50°;Maximum speed: 0-3600 rpm;Noise level: 100 dB;Max. cutting depth at 90°: 47 mm;Max. cutting depth at 45°: 33 mm;Weight: 2.2 kg4. DeWALT DCH072 Cordless Hammer Drill Advantages:Features a brushless motor and an SDS-plus drill bit3 operating modes-drilling, hammer drilling, and chiselingUltra-compact, lightweight, and ergonomic design for added comfort and supportLED light located at the front of the body to ensure excellent visibilityThe tool is ideal for drilling holes in metal and making holes in concrete, brick, and masonry, as well as wood from 4 to 14 mmTechnical specifications:Voltage: 12 V;Battery type: Li-Ion;Motor type: brushless;Chuck type: SDS-plus;LED lighting: Yes;Hammer drill mode: Yes;Impact rate: 0 - 4280 min-1;No-load speed: 0-910 rpm;Maximum drilling diameter in steel: 10 mm;Maximum drilling diameter in wood: 13 mm;Maximum drilling diameter in concrete: 14 mm;Noise level: 94 dB;Impact force: 1.1 J;Dimensions (L x W x H): 400 x 95 x 250 mm;Weight: 1.7 kg5. Dewalt DCS353 Cordless OscillatorAdvantages:Features a powerful brushless motor for high performance and efficiencyThe QUICK-CHANGE accessory system allows for quick blade and attachment changes without the use of additional toolsThe DUAL-GRIP Variable Speed Trigger system ensures maximum speed and controlThe bright LED light illuminates dark work surfaces for precise cuttingOffers a variety of applications such as cutting, flush cutting with a saw, and sanding thanks to a wide range of accessoriesWith a lightweight and ergonomic design, thanks to its compact construction and weight of only 0.86 kg, it is the ideal tool for working in tight and hard-to-reach spacesTechnical specifications:Voltage: 12 V;Battery type: Li-Ion;Motor type: brushless;LED lighting: YES;RPM: 0-18,000 min-1;Oscillation angle: 1.6°;Noise level: 97 dB;Weight:0.86 kg6. DeWALT DCL510 Cordless FlashlightAdvantages:Natural white light with a maximum brightness of 130 lumensFeatures a 360-degree rotating headEquipped with a kickstand and a strong magnet for mounting, allowing for comfortable operation and hands-free useTechnical specifications:Voltage: 12 VBattery type: Li-IonMax. brightness: 130 lumensHead rotation range: 360 degreesLamp type: LED7. 5.0Ah battery - 1 pc 8. 2.0Ah battery - 2 pcs 9. Charger - 1 pc 10. Bag - 1 pc..

DeWalt DCK611P1D2-QW Cordless Combo Kit, 12 V XR, 6 Pieces The DeWalt DCK611P1D2-QW is a set of six brushless machines on the compact 12 V XR platform. It covers driving, drilling, cutting and lighting with tools that weigh under a kilogram and reach into places an 18 V tool will not. Supplied with three batteries, a charger and a fabric bag. Which machines are in the kit Included are the DCD701 drill driver, the DCF801 impact driver, the DCS512 circular saw with a 140 mm blade, the ultra-compact DCH072 SDS-Plus rotary hammer, the DCS353 oscillating multi-tool and the DCL510 work light. Compactness as the main advantage The DCD701 is just 152 mm long and weighs 0.9 kg without a battery; the DCF801 is shorter still at 125 mm for the same weight. That allows work between joists, inside cabinets, in consumer units and in roof spaces where a larger machine simply cannot turn. The DCH072 rotary hammer delivers 1.1 J of impact energy and drills 4 to 14 mm holes in concrete and brick. Cutting and finishing work The DCS512 saw runs a 140 mm blade, bevels to 50°, and has a cast aluminium shoe and an electronic motor brake. The DCS353 multi-tool has a 1.6° oscillating angle and a DUAL-GRIP switch for smooth speed control. The DCL510 light rotates through 180° and carries a belt hook and a magnet for attaching to steel. Who it is for The set is aimed at electricians, kitchen and furniture fitters, HVAC installers, building maintenance teams and anyone working mainly indoors and in confined space. The six machines cover such a team's typical working day without a trip back to the van for another tool, and the brushless motors give longer life and less maintenance under daily load. Power The kit includes one 5.0 Ah battery and two 2.0 Ah batteries. The large pack suits the higher-draw machines - the saw and the rotary hammer - while the compact 2.0 Ah packs keep the drivers small and light. Everything stows in a fabric carrying bag. Technical specifications PlatformDeWalt 12 V XR Li-Ion Number of machines6, all brushless DCD701 - drill driver152 mm long, 0.9 kg, 15-stage clutch DCF801 - impact driver125 mm long, 0.9 kg, 3 electronic speeds DCS512 - circular saw140 mm blade, bevel to 50°, electronic brake DCH072 - rotary hammerSDS-Plus, 1.1 J, 0 - 910 rpm, 0 - 4280 bpm DCH072 drilling capacity4 - 14 mm in concrete and masonry DCS353 - multi-tool1.6° oscillating angle, DUAL-GRIP control DCL510 - work light180° rotation, belt hook and magnet Batteries1 x 5.0 Ah + 2 x 2.0 Ah ChargerIncluded StorageFabric bag What's in the box 1 x DeWalt DCD701 drill driver 1 x DeWalt DCF801 impact driver 1 x DeWalt DCS512 circular saw, 140 mm blade 1 x DeWalt DCH072 SDS-Plus rotary hammer 1 x DeWalt DCS353 oscillating multi-tool 1 x DeWalt DCL510 work light 1 x 12 V XR battery, 5.0 Ah 2 x 12 V XR batteries, 2.0 Ah 1 x charger 1 x fabric bag Questions and Answers Which six machines are in the DCK611P1D2-QW kit? The DCD701 drill driver, DCF801 impact driver, DCS512 circular saw with a 140 mm blade, DCH072 SDS-Plus rotary hammer, DCS353 oscillating multi-tool and DCL510 work light. All six have brushless motors and run on the 12 V XR platform. Why 12 V rather than 18 V? Size and weight. The drill is 152 mm long and weighs 0.9 kg, which allows work inside cabinets, consumer units, between joists and in tight roof spaces. For jobs demanding maximum power and all-day loading, the 18 V platform remains the better choice. How many batteries are included and why are they different? Three - one 5.0 Ah and two 2.0 Ah. The large pack is intended for the saw and the rotary hammer, which draw the most current and need runtime. The compact 2.0 Ah packs keep the drivers small and light, which is the main reason for choosing a 12 V platform in the first place. Can the DCH072 rotary hammer drill into concrete? Yes. The DCH072 has an SDS-Plus chuck and 1.1 J of impact energy, with a drilling capacity of 4 to 14 mm in concrete, brick and masonry. That covers holes for plugs and standard fixings. Large-diameter anchors need a more powerful rotary hammer. What blade does the DCS512 saw take? A 140 mm diameter blade. The saw bevels to 50°, has a cast aluminium shoe for stability and an electronic brake that stops the blade quickly once the trigger is released. It suits breaking down panels and thinner timber. Are the batteries compatible with other DeWalt 12 V tools? Yes, the batteries belong to the DeWalt 12 V XR platform and power the whole range in that series. If you already own DeWalt 12 V tools, the packs from this kit will run them too. How are the machines stored? In a fabric carrying bag with handles and a zip. With six compact machines that is a practical choice - the bag is considerably lighter and more fle..

The DeWALT DCK685P3T cordless tool set includes:1. DeWalt DCD796 Cordless Screwdriver Advantages:Ultra-compact and lightweight design, allowing for use in tight spacesIntelligent trigger design allows for complete control over applicationsCompact 13mm keyless chuck with a single sleeve and automatic spindle lock for quick and easy one-handed bit changesLED lights with delay function for improved visibility and functionalityLi-Ion slide-in battery for easy insertion and removalSteel belt clip and sturdy magnetic bit holder for easy storageTechnical Specifications:Rechargeable battery voltage: 18 VBattery type: Li-ionTorque: 70.00 NmMax. in wood: 40.00 mmMax. in metal: 13.00 mmNo-load speed: 550-2000 rpmImpact rate: 9,350-34,000 bpmChuck range: 1.5-13 mmBrushless motor: yes Overload protection: no Constant-voltage electronics: no Built-in work light: yes Reverse: yes Weight: 6.32 kgWeight: 1.80 kg2. DEWALT DCF887 Cordless Impact Wrench Advantages:Aluminum housing provides better heat dissipation.Built-in overload protection 6.35 mm keyless hex chuck for quick and easy bit changes.Electronic motor brake.Work area lighting.Technical specifications:Voltage: 18 VBattery type: Li-ionMechanical speeds: 3No-load speed, 1st speed: 0 - 1000 min-1No-load speed, 2nd speed: 0 - 2800 rpmNo-load speed, 3rd speed: 0 - 3250 rpmBlows per minute: 0 - 3800 min-1Chuck size: 1/4''Screw size: M4 - M8Standard bolts: M5 - M14High-strength bolts: M5 - M12Maximum torque: 205 NmLighting: LEDNoise: 96 dBDimensions (L x W x H): 134 x 67 x 195 mmWeight: 0.94 kg3. DeWALT DCS355 Cordless Multifunction Oscillator Advantages:Features a brushless motor, providing 57% more runtime compared to brushed motors.The QUICK-CHANGE accessory system allows for quick blade and attachment changes without the use of additional tools.The DUAL-GRIP Variable Speed Trigger ensures maximum speed and control during use.The bright LED light illuminates dark work surfaces for precise cutting and comes with a straight-cut guide with depth control.With a lightweight and ergonomic design, thanks to its compact construction and weight of only 1.06 kg, it is the ideal tool for working in tight and hard-to-reach spacesTechnical specifications:Voltage: 18 V;Power: 300 W;Battery type: Li-Ion;Motor type: brushless;LED lighting: YES;RPM: 0-20,000;Oscillation angle: 1.6°;Noise level: 97 dB;Dimensions (L x W x H): 310 x 78 x 110 mm;Weight:1.06 kg4. DeWALT DCH273 Cordless Brushless Hammer Drill Advantages:Very lightweight and comfortable, ideal for drilling in concrete, brick, and masonry from 4 mm to 24 mmLow vibration levels significantly reduce fatigue during useEquipped with an LED work light for better visibilityThree operating modes-drilling, hammer drilling, and chiselingTechnical Specifications:Voltage: 18 VBattery type: Li-ionNo-load speed: 0 - 1100 rpmChuck type: SDS-plusMaximum drilling diameter in steel: 13 mmMaximum drilling diameter in wood: 26 mmMaximum drilling diameter in concrete: 24 mmBlows per minute: 0 - 4600 min-1 Impact energy: 2.1 J Lighting: LEDNoise level: 86 dBWeight: 3.1 kg5. DeWALT DCG405 Cordless Angle Grinder Advantages:Features the new XR Lithium-Ion Technology, which ensures long battery life and high power.Ideal for fast cutting and grinding, thanks to the powerful cooling fan and brushless motor.The tool's soft start ensures greater control when starting the angle grinder.Features motor overload protection and an anti-vibration system for greater comfort and reduced user fatigue.The restart protection ensures that the tool will not accidentally turn on after a power interruption.A side-mounted spindle lock button allows for easy and quick changing of tool accessories.Technical specifications:Voltage: 18 VBattery type: Li-ionNo-load speed: 9000 rpmDisc diameter: 125 mmBore size: 22.23 mmSpindle size: M14Lighting: NoNoise level: 85 dBDimensions (L x W x H): 315 x 255 x 115 mmWeight: 1.761 kg6. DEWALT DCS570 Cordless Circular Saw Advantages:18 V voltage and 184x16 mm blade diameterPrecise cutting depth adjustment up to 65 mm using the scaleStepless bevel angle adjustment up to 57°Thanks to its good balance, the saw is safe and does not tire the userAdditional handle for safe two-handed operationTechnical specifications:Battery voltage: 18 VBattery capacity: 5 AhBlade outer diameter: 184 mmInner diameter of the disc: 16 mmNo-load speed: 5500 rpmMaximum cutting depth at 45°: 51 mmMaximum cutting depth at 90°: 67 mmWeight: 3.600 kg7. DeWALT DCB184 battery, 18V, 5Ah: 3 pcs 8. DeWALT DCB115 charger: 1 pc 9. TSTAK case: 3 pcs..

DeWalt DCK865P4T-QW 18V XR Brushless 8-Piece Combo Kit The DeWalt DCK865P4T-QW is a complete professional set of eight brushless machines on the 18 V XR platform, supplied with four 5.0 Ah batteries, a twin charger and four TSTAK VI cases. The line-up covers practically the whole range of work on a building site - drilling and fastening, cutting wood and metal, grinding and hammering into concrete - without dragging mains power around. Which machines are in the kit The set includes the DCD796 combi drill with 70 Nm of torque, the DCF899H impact wrench with a 1/2" square drive and 950 Nm of nut-busting torque, the DCH273 SDS-Plus rotary hammer with 2.1 J impact energy, the DCG405 angle grinder for Ø 125 mm discs, the DCS570 circular saw with a 184 mm blade, the DCS367 reciprocating saw with a 28.6 mm stroke, the DCS334 top-handle jigsaw with a 26 mm stroke and the DCS355 oscillating multi-tool. Brushless throughout All eight machines have brushless motors. Doing away with carbon brushes removes the main source of friction and wear, which gives higher efficiency, more work done per charge, a lower running temperature and considerably longer tool life. On a set of this size the difference shows up most clearly in maintenance costs over the years. Power and storage The kit comes with four DCB184 18 V / 5.0 Ah batteries and a DCB132 twin charger, which charges two batteries in sequence and supports the whole XR range. The four TSTAK VI cases clip to one another and travel as a single stack, while the internal layout lets each machine travel together with its consumables. Who it is for The kit is aimed at construction and installation crews, electricians, plumbers and service teams equipping a workplace in one go. A shared platform means one battery type for all eight machines, one kind of charger and one store of consumables. Technical specifications PlatformDeWalt 18 V XR Li-Ion Number of machines8, all brushless DCD796 - combi drill70 Nm, 2 speeds, 13 mm chuck DCF899H - impact wrench1/2" square drive, 950 Nm nut-busting DCH273 - rotary hammerSDS-Plus, 2.1 J DCG405 - angle grinderØ 125 mm DCS570 - circular saw184 mm blade DCS367 - reciprocating saw28.6 mm stroke DCS334 - jigsaw26 mm stroke, top handle DCS355 - oscillating multi-tooloscillating, quick-change system Batteries4 x DCB184, 18 V / 5.0 Ah ChargerDCB132, twin Cases4 x TSTAK VI What's in the box 1 x DeWalt DCD796 combi drill 1 x DeWalt DCF899H impact wrench 1 x DeWalt DCH273 SDS-Plus rotary hammer 1 x DeWalt DCG405 angle grinder, Ø 125 mm 1 x DeWalt DCS570 circular saw 1 x DeWalt DCS367 reciprocating saw 1 x DeWalt DCS334 jigsaw 1 x DeWalt DCS355 oscillating multi-tool 4 x DeWalt DCB184 batteries, 18 V / 5.0 Ah 1 x DeWalt DCB132 twin charger 4 x TSTAK VI cases Questions and Answers Which eight machines are included in the DCK865P4T-QW? The kit contains the DCD796 combi drill, DCF899H impact wrench, DCH273 SDS-Plus rotary hammer, DCG405 angle grinder, DCS570 circular saw, DCS367 reciprocating saw, DCS334 jigsaw and DCS355 oscillating multi-tool. All eight machines have brushless motors and run on the 18 V XR platform. How many batteries are supplied and at what capacity? Four DCB184 batteries, 18 V and 5.0 Ah each, together with a DCB132 twin charger. With eight machines, four batteries let a crew work in parallel while some of the packs are on charge. How are the machines stored? In four TSTAK VI cases. Cases in the TSTAK system clip to one another through the latches on the top and bottom and are carried as a single stack, which makes moving eight machines to site manageable. Each case holds two machines along with their batteries and consumables. Are the batteries compatible with other DeWalt tools? Yes. The DCB184 belongs to the DeWalt 18 V XR platform and powers the whole range in that series. If you already own XR tools, the batteries from this kit will run them, and your existing packs will run the eight machines here. What is the difference between the DCF899H wrench and an ordinary impact driver? The DCF899H is an impact wrench with a 1/2" square drive for sockets and delivers 950 Nm of nut-busting torque - it is made for bolted joints in steelwork, scaffolding and vehicle servicing. An impact driver takes hex bits and works at far lower torque, for driving screws. The two are not interchangeable. Can the DCH273 rotary hammer drill into concrete? Yes, that is its main purpose. The DCH273 has an SDS-Plus chuck and 2.1 J of impact energy, which suits it to holes for plugs and anchors in concrete and brick. For lighter work in masonry the hammer mode of the DCD796 drill can be used instead. What do brushless motors give you on a set of eight machines? A brushless motor has no carbon brushes to wear down a..

Manufacturer : Milwaukee Model: M18 CBLPP2A-402C Warranty: 3 years after registration on the website Description: Tool 1 M18 CBLPD Tool 2 M18 CBLID 2 x 4Ah Battery - M18 B4 Charger - M12-18C Battery capacity (Ah) 4.0 Battery type Li-ion Charger 80 minutes Number of batteries included 2 Voltage (V) 18 M18 CBLPD - Compact brushless impact driver: Compact 165 mm long hammer drill for access to tight spaces. Advanced 13 mm heavy-duty metal chuck for quick bit changes and superior bit retention. REDLINKTM electronics provide overload protection for both the tool and the battery, ensuring the best quality in the system. REDLITHIUMTM-ION battery pack offers superior pack design, electronics, and fade-free performance to provide more runtime and more work over the life of the pack. 60 Nm torque-the best power-to-size ratio. All-metal reversible belt clip to hang your tool quickly and easily. On-board fuel gauge and LED light. Flexible battery system: works with all MILWAUKEE® M18TM batteries. M18 CBLID - Compact Brushless 1/4'' Hex Impact Wrench: This compact driver is only 130 mm long, making it ideal for working in confined spaces. Brushless motor technology delivers 180 Nm of torque, 3,400 rpm, and 4,200 rpm. A heavy-duty metal gearbox and high-power gears ensure superior durability and maximum torque. REDLINKTM electronics provide overload protection for both the tool and the battery, ensuring the highest quality in the system. REDLITHIUMTM-ION battery pack features superior pack design, electronics, and no-drift performance to provide more runtime and more work over the life of the pack. On-board fuel gauge and LED light. All-metal reversible belt clip to hang your tool quickly and easily. Flexible battery system: works with all MILWAUKEE® M18TM batteries. M12TM - M18TM FAST CHARGER M12-18C: Recharges all M18TM, M14TM, and M12TM REDLITHIUMTM-ION batteries. Recharges sequentially-first, first charge-resulting in less time needed to manage charging cycles. REDLITHIUMTM-ION 3.0 Ah / 4.0 Ah batteries recharge in 60 min / 80 min or less. REDLITHIUMTM-ION 1.5 Ah / 2.0 Ah batteries recharge in 30 min / 40 min or less. M18TM 4.0 Ah Battery - M18 B4: Delivers up to 2x more runtime, up to 20% more power, and up to 2x longer battery life compared to other lithium-ion technologies and/or previous MILWAUKEE® battery technology. REDLITHIUMTM-ION protection with REDLINKTM digital overload protection to prevent users from damaging their cordless power tool investment through misuse. Individual cell monitoring ensures optimal charging and discharging for maximum life. A durable metal-frame battery construction with impact-resistant separators prevents pack failure from excessive vibration or drops. Water-resistant pathways lead away from the electronics and out of the battery. It can be used in extreme temperatures down to -20 °C without compromising runtime or battery life. The onboard battery fuel gauge helps the user maximize battery performance...

The Makita DK0008 orbital sander and jigsaw set includes:1. MAKITA 4326 Jigsaw Advantages:The protective guard protects the user's hands.The ergonomic handle with a soft rubber grip ensures more comfortable operation and greater control.Low vibration and noise levels while operating the tool.Capable of using thick blades (1.7 mm thick).The protective cover shields the user from flying shavings and other particles.Sturdy adjustable base for precise cutting.The compact and lightweight design ensures excellent control and maneuverability when using the tool.Technical specifications:Power: 450 WNo-load speed: 500 - 3100 rpmBlade stroke: 18 mmMaximum cutting depth in metal: 6 mmMaximum cutting depth in wood: 65 mmMaximum cutting depth in aluminum: 6 mmCutting angle: 0-45°Noise level: 86 dBDimensions (L x W x H): 217 x 77 x 197 mmWeight: 1.8 kg2. Makita BO3710 Orbital Sander Advantages:The tool's ergonomic body fits perfectly in the user's hand, ensuring a more secure grip when operating the tool with one or two hands.High-power motor achieved through the use of an improved cooling system.The sturdy aluminum base plate ensures greater durability and more effective protection against vibrations.The compact and lightweight design ensures excellent control and maneuverability when operating the tool.Technical specifications:Power: 190 WNo-load speed: 11,000 rpmVibration rate: 24,000 min-1Pad size: 93 x 185 mmPad size: 93 x 228 mmPad stroke: 2 mmNoise level: 72 dBDimensions (L x W x H): 253 x 92 x 154 mmWeight: 1.6 kg..

Makita DLX2590TJ Cordless Brushless Combo Kit, LXT, 18 V The Makita DLX2590TJ is a professional two-piece kit built around brushless motors and the Makita LXT 18 V platform. It pairs the DHP492 combi drill with the DTW300 impact wrench, making it a natural choice for fitters, installers and service crews who need drilling and high-torque fastening from a single battery system. Makita DHP492 Combi Drill The DHP492 delivers a maximum fastening torque of 130 Nm in hard joints and 65 Nm in soft joints. Its two-speed gearbox (0 - 550 / 0 - 2100 min-1) lets you switch between maximum power and fast drilling. The tool runs in three modes - screwdriving, drilling and hammer drilling - handling wood up to 76 mm, steel up to 13 mm and masonry up to 16 mm. A 21-stage clutch, a 1.5 - 13 mm keyless chuck, an electric brake and twin LED work lights give precise control in every application. Makita DTW300 Impact Wrench The DTW300 is an exceptionally compact wrench - just 144 mm long - with a 1/2" square drive, 330 Nm of maximum fastening torque and 580 Nm of nut-busting torque. Electronic 4-stage impact power selection allows accurate control on scaffolding, vehicle fasteners and steel structures. XPT technology protects the tool against dust and moisture, while the full-speed mode shortens trigger travel for faster work. Batteries, Charger and Case The kit ships with two BL1850B 18 V / 5.0 Ah batteries with charge level indicators, a DC18RC rapid charger and a rugged Makpac Type 3 case that stacks with the rest of the Makpac system. The batteries are compatible with the entire Makita LXT 18 V range. Applications Together the two machines cover a wide range of jobs - timber and steel framing, scaffolding, partition building, workshop and automotive servicing, plus concrete drilling for brackets and anchors. A shared LXT platform means one battery type for both tools and less downtime on site. Technical Specifications SpecificationDHP492 - combi drillDTW300 - impact wrench Voltage18 V (LXT Li-ion)18 V (LXT Li-ion) Motor typeBrushlessBrushless No load speed0 - 550 / 0 - 2100 min-10 - 1000 / 1800 / 2600 / 3200 min-1 Impacts per minute0 - 8250 / 0 - 31500 min-10 - 1800 / 2600 / 3400 / 4000 min-1 Maximum torque130 Nm (hard) / 65 Nm (soft)330 Nm fastening / 580 Nm nut-busting Settings21 clutch stages + drill and hammer mode4 electronic impact stages Chuck / driveKeyless 1.5 - 13 mm1/2" square drive (12.7 mm) Drilling capacityWood 76 mm / Steel 13 mm / Masonry 16 mm- Bolt capacity-Standard M10 - M20 / High tensile M10 - M16 Dimensions (L x W x H)180 x 81 x 265 mm246 x 81 x 144 mm Weight1.7 kg (without battery)1.8 kg (with battery) Light / reverseLED, reverse, electric brakeLED, reverse, electric brake What's in the Box 1 x Makita DHP492 combi drill (with side handle and depth stop) 1 x Makita DTW300 impact wrench 2 x Makita BL1850B batteries, 18 V / 5.0 Ah Li-ion 1 x Makita DC18RC charger 1 x Makita Makpac Type 3 case (821551-8) Questions and Answers What exactly is included in the Makita DLX2590TJ kit? The kit contains two brushless machines - the DHP492 combi drill and the DTW300 impact wrench with a 1/2" square drive. They are supplied with two BL1850B 18 V / 5.0 Ah batteries, a DC18RC rapid charger and a Makpac Type 3 case. The DHP492 comes with a side handle and a depth stop. Can the DTW300 be used on car wheel bolts? Yes. The wrench delivers 330 Nm of fastening torque and 580 Nm when loosening, which covers standard M10 - M20 bolts. Electronic 4-stage impact power selection also lets you work on more delicate joints. For wheel bolts we recommend doing the final tightening with a torque wrench so that the manufacturer's specified figure is met exactly. Do the batteries from this kit work with other Makita tools? Yes. The BL1850B belongs to the Makita LXT 18 V platform and powers the whole range in that series - drivers, circular saws, angle grinders, vacuums and garden equipment. The reverse is true as well: if you already own LXT batteries, they will run both machines in this kit. What advantage do the brushless motors give on these two machines? A brushless motor has no carbon brushes to wear down and waste energy through friction. In practice that means higher efficiency and more work done per charge, a lower running temperature and noticeably longer tool life. Both machines in this kit - the DHP492 and the DTW300 - have brushless motors. Can the DHP492 drill into concrete? Yes. Besides screwdriving and drilling, the DHP492 has a hammer mode for masonry and concrete with a capacity of up to 16 mm. It drills up to 76 mm in wood and 13 mm in steel. For routine large-diameter drilling in concrete, however, an SDS-Plus rotary hammer is the better tool. How long does a BL1850B battery take to charge with the DC18RC? Around 45 minutes for a full charge of a 5.0 Ah battery. The DC18RC..

Makita DLX3195JX1 LXT 18V Cordless Tool SetThe Makita DLX3195JX1 is a cordless tool set from the LXT 18V platform, designed for professional use in construction, repair work, installation, and general workshop tasks. The set includes three brushless tools: the DDF484 cordless drill/driver, the DGA504 angle grinder, and the DHR243 hammer drill, as well as two BL1850B 5.0 Ah batteries, a DC18RC fast charger, and two Makpac cases for convenient storage and transport.Three tools for drilling, screwing, cutting, and chiselingThe DDF484 is a cordless drill/driver with a brushless motor and a two-speed all-metal gearbox. The tool delivers a maximum torque of 54 Nm in hard drive mode and 30 Nm in soft drive mode, with no-load speeds of 0-500 rpm in first gear and 0-2000 rpm in second. It is suitable for drilling up to 13 mm in steel and up to 38 mm in wood, as well as for working with wood screws up to 10 x 90 mm. It is equipped with 21-step torque adjustment, a one-touch quick-release 13 mm chuck, and LED lighting with an afterglow function.The DGA504 is a brushless angle grinder designed for surface grinding and cutting. It operates with a 125 mm disc, an M14 spindle, and reaches 8,500 rpm. The machine features electronic speed control under load, a current limiter, and an ADT system for speed adaptation. Its weight of 1.8 kg contributes to more comfortable operation during prolonged use.The DHR243 is a hammer drill with an SDS-Plus chuck, suitable for drilling and light chiseling tasks. It delivers an impact energy of 2.0 J, speeds up to 950 rpm, and an impact rate of up to 4,700 bpm. The tool drills up to 24 mm in concrete, up to 13 mm in steel, and up to 27 mm in wood. Changing accessories is quick thanks to the one-step SDS-Plus system, and the chisel can be positioned in 40 different angles. A vibration damping system is also included.Practical advantages for daily workAll three tools in the set feature brushless motors, which support efficient operation and a long service life. XPT technology provides protection against dust and moisture, while the ergonomic design and LED lighting facilitate work in various conditions. The set is suitable for tasks requiring mobility and freedom of movement without a power cord.The two BL1850B lithium-ion batteries with a capacity of 5.0 Ah provide longer runtime and feature charge indicators. The DC18RC fast charger enables quick charging, and the two Makpac cases facilitate organized storage and transport of the equipment.Package ContentsThe set includes the DDF484Z cordless drill/driver, the DGA504Z angle grinder, the DHR243Z hammer drill, 2 BL1850B 18V 5.0 Ah batteries, the DC18RC fast charger, Makpac Small 821550-0, and Makpac Large 821552-6.The Makita DLX3195JX1 is a practical solution for professionals looking for a set of cordless tools for a variety of applications, featuring convenient storage and immediate readiness for use...

Milwaukee M12 FPP3R-6423P Cordless Tool Set, 12V The M12 FPP3R-6423P set is the ideal compact, all-in-one solution that includes two tools: the Milwaukee M12 FPD Cordless Brushless Impact Driver,Milwaukee M12FCOT-0 Cordless Multi-Sander, and Milwaukee M12CH-0 Cordless Brushless Hammer Drill, as well as an M12 B4 (4.0 Ah) battery , an M12 B2 (2.0 Ah) battery , M12 B6 (6.0 Ah) REDLITHIUMTM-Ion battery , Milwaukee C12C charger, and Milwaukee PACKOUTTM storage case. The Milwaukee kit includes tools with a new-generation POWERSTATETM brushless motor, which delivers more power in a more compact size. It features bright LED worklighting. It features the REDLINK PLUSTM intelligent system. The REDLINK PLUSTM intelligent system provides advanced digital overload protection for the tool and battery and uniquely enhances tool performance under load. The REDLITHIUM-IONTM battery features a superior pack design to provide more runtime. The Milwaukee kit features a flexible battery system: it works with all Milwaukee® M12TM batteries. Milwaukee® DRIVE CONTROLTM allows the user to switch between two different speed and torque settings, as well as a self-tapping mode, to increase application flexibility. 1. Milwaukee M12 FPD Cordless Brushless Impact Driver, 12 V, 44 NmVoltage: 12 V;Battery capacity: Li-Ion;Brushless motor: YES;LED light: YES;Hammer drill mode: YES;Chuck capacity: 1.5 - 13 mm;Maximum speed: 0-450/0-1,700 rpm;Blows per minute: 0-6,750 / 0-25,500 min-1;Maximum drilling diameter in steel: 13 mm;Maximum drilling diameter in concrete: 13 mm;Maximum drilling diameter in wood: 35 mm;Torque: 44 Nm;Number of speeds: 2;Compatible with all MILWAUKEE® M12TM batteries;Weight: 3 kg.2. Milwaukee M12FCOT-0 12V Cordless Multi-Sander, 76 mmVoltage: 12V;Battery type: Li-ion;Brushless motor: YES;LED light: YES;Disc diameter: 76 mm;Blade bore size: 10 mm;Cutting depth: 16.3 mm;Cutting width: min. 1 mm / max. 3.2 mm;Maximum speed: 0-20,000 rpm;Sound power level: 105 dB(A);Sound power level uncertainty: 3 dB(A);Sound pressure level: 94 dB(A);Sound pressure level uncertainty: 3 dB(A);Vibration: 2.9 m/s2;Vibration uncertainty: 1.5 m/s2;Oscillation angle left/right: 2.1°;Weight: 1.1 kg3. Milwaukee M12CH-0 Cordless Brushless Hammer Drill, 12V, 1.1 JVoltage: 12V;Battery type: Li-ion;Brushless motor: YES;LED light: YES;Chuck type: SDS-Plus;Impact force: 1.1 J;Impact rate: 0 - 6,575 min-1;Maximum speed: 0-900 rpm;Maximum bolt diameter: M14Maximum torque: 50 Nm;Maximum concrete drilling capacity: 13 mm;Maximum drilling capacity in steel: 10 mm;Maximum drilling capacity in wood: 13 mm;Vibration: 4.4 m/s2;Sound power: 95.7 dB;Weight: 2 kg4. Milwaukee M12 B2 rechargeable batteries, 12V, 2.0 AhVoltage: 12V;Battery type: Li-ion;Battery capacity: 2.0 Ah;LED indicator: Yes;Weight: 0.400 kg5. Milwaukee M12 B4 Rechargeable Battery, 12V, 4.0 AhVoltage: 12V;Battery type: Li-ion;Battery capacity: 4.0 Ah;LED indicator: Yes;Weight: 0.400 kg6. Milwaukee M12B6 Rechargeable Battery, 12V, 6.0 AhVoltage: 12V;Battery type: Li-ion;Battery capacity: 6.0 Ah;LED indicator: Yes;Weight: 0.400 kg7. Milwaukee C12 C Charger, 12V, Li-ionCharging range: 12 V;Battery type: Li-ion;Charging time: 30 min (1.5Ah), 40 min (2.0Ah), 60 min (3.0Ah), 80 min (4.0Ah);Weight: 0.500 kg..