Pliers - Page 5

Knipex 71 72 610 Rebar and Bolt Cutting PliersDescription:Knipex 71 72 610 rebar and bolt cutting pliers with a length of 610 mm and a cutting capacity up to 48 HRC. The cutting edges undergo additional induction hardening, thereby achieving a hardness of approximately 62 HRC. The product is made of special tool steel; the handles are made of steel, and the blade is made of forged, oil-hardened chrome-vanadium steel. The shears feature ergonomic handles equipped with a non-slip two-component coating, which ensures greater efficiency during use. Additionally, there are 12 adjustment positions via an eccentric bolt, allowing for individual adjustment of the tool depending on the user's specific needs. For the operator's convenience, the pliers are equipped with a stopper and a comfortable shock absorber. It features a replaceable cutting head, which allows for easy maintenance and long-term use of the tool. Technical specifications:Length: 610 mmHead thickness: 33 mmCutting edge length: 34 mmHRC 19: 9 mmHRC 40: 8 mmHRC 48: 7 mmMaterial: special tool steelCutting capacity: 11 mmWeight: 2.55 kg..

Knipex 00 20 11 Pliers Set, 3 Pieces - 03 02 180, 26 12 200, 70 02 160 Knipex 00 20 11 is the three-piece assembly set that covers almost everything in day-to-day work - gripping, bending, pulling and cutting wire. All three tools are Made in Germany, with induction-hardened cutting edges and multi-component grips, supplied in a deep-drawn plastic tray with a transparent lid, 170 x 370 x 40 mm, which drops straight into a tool cabinet drawer. Knipex 03 02 180 combination pliers The workhorse of the set - 180 mm long, with separate gripping zones for flat and round material and a wire cutter. Maximum cutting capacity is 3.4 mm in medium-hard wire and 2.2 mm in hard wire, with cutting-edge hardness of approximately 60 HRC. The head is chrome plated. Knipex 26 12 200 long nose pliers A stork's beak plier, 200 mm long, with straight extended jaws, serrated gripping surfaces and an integrated cutter. It is built for awkward places - inside a junction box, behind a panel, or in a chassis. It cuts 3.2 mm medium-hard and 2.0 mm hard wire, with edge hardness of about 61 HRC. Knipex 70 02 160 diagonal cutters The classic Vanadin-Super diagonal cutter, 160 mm long with a slim head that reaches wire in tight spaces. Capacity is 4.0 mm soft, 2.8 mm medium-hard and 2.0 mm hard wire, and the cutting edges reach around 62 HRC - the highest in the set, because this is the tool that does the most cutting. Applications The set is aimed at assembly, maintenance and repair - de-energised electrical installation, mechanical engineering, vehicle workshops, the bench and the home tool cabinet. The three pliers complement each other: combination pliers for rough work, long nose for precision, diagonal cutters for a clean cut. The tray keeps each tool in its place and shows at a glance which one is missing. Technical specifications ManufacturerKnipex Article00 20 11 Pieces3 Contents03 02 180 + 26 12 200 + 70 02 160 Combination pliers 03 02 180180 mm, cutting 3.4 / 2.2 mm, approx. 60 HRC Long nose pliers 26 12 200200 mm, with cutter, cutting 3.2 / 2.0 mm, approx. 61 HRC Diagonal cutters 70 02 160160 mm, cutting 4.0 / 2.8 / 2.0 mm, approx. 62 HRC Cutting edgesInduction hardened GripsTwo-colour multi-component VDE insulationNo - the tools are not insulated for live working PackagingDeep-drawn tray with transparent lid Tray dimensions170 x 370 x 40 mm OriginGermany Questions and Answers What exactly is in the set? Three Knipex pliers: 03 02 180 combination pliers 180 mm long, 26 12 200 long nose pliers with cutter 200 mm long, and 70 02 160 diagonal cutters 160 mm long. Everything is laid out in a deep-drawn tray with a transparent lid. Are the pliers insulated for live working? No. All three tools have multi-component grips for comfort, but they are not VDE insulated and are not tested to 1000 V. Live working requires the VDE versions of the same models. What wire do the 03 02 180 combination pliers cut? Maximum capacity is 3.4 mm in medium-hard wire and 2.2 mm in hard wire. The cutting edges are induction hardened to about 60 HRC, which gives them a long life when steel wire is cut regularly. What are the 26 12 200 long nose pliers for? This is a stork's beak plier - the straight extended jaws reach places combination pliers cannot enter, such as inside a junction box or behind a distribution board. They have serrated gripping surfaces and a built-in wire cutter. How hard are the cutting edges? Approximately 60 HRC on the combination pliers, about 61 HRC on the 26 12 200 and about 62 HRC on the 70 02 160 diagonal cutters. Every cutting edge is induction hardened. How is the set supplied? In a rigid deep-drawn plastic tray with a transparent lid measuring 170 x 370 x 40 mm. The tray is designed to go straight into a workbench drawer or onto the bench. Where are the pliers made? In Germany. Knipex manufactures its full pliers range in Wuppertal and the Made in Germany mark is stamped on the head of each of the three tools in the set. ..

Stanley DYNAGRIP Pliers Set, 3 Pieces 150 mm, STHT0-75094 Stanley STHT0-75094 is a set of three 150 mm pliers from the DYNAGRIP range: combination pliers STHT0-74456, diagonal cutting pliers STHT0-74362 and long nose pliers STHT0-74363. Each tool carries its own article number stamped on the joint. The three tools, and why these three This is the base trio that covers most of what electrical, maintenance and workshop work asks for. The combination pliers grip, twist and cut heavier conductor. The diagonal cutters cut cleanly and close to the surface - their edge runs right to the tip, which is the difference between a trimmed lead and a stub. The long nose pliers reach where a finger will not: into a terminal block, behind a board, inside a tight junction box, while still offering a serrated gripping face and a small cutting section at the base. Drop-forged steel and a black oxide finish The jaws are drop-forged steel - the process in which the grain of the metal follows the shape of the tool instead of being cut through by machining. Over that sits a black oxide finish that slows corrosion. The coating is thin and does not change the jaw dimensions, and it deserves a realistic expectation: it extends life in a bag and in a van, it does not make the tool stainless. The three-zone handle The handle is bi-material and divided into three zones, each with a job. The guard zone is the raised section at the base of the jaws that stops the hand sliding forward onto the cutting edge. The strength zone is the widened middle where the palm bears during a cut - the point of highest pressure, and where the material is harder. The control zone is the end of the handle, from which the pliers are opened and steered with the fingers. Who the set is for Three 150 mm tools are bag size, not cabinet size: big enough for real work and small enough to be carried every day. The set is the logical starting point for an electrician, a building maintenance kit, an automotive workshop or a home tool roll that has to be ready for anything up to medium size. Technical specifications ManufacturerStanley RangeDYNAGRIP Article numberSTHT0-75094 Contents3 pliers Combination pliersSTHT0-74456, 150 mm Diagonal cutting pliersSTHT0-74362, 150 mm Long nose pliersSTHT0-74363, 150 mm MaterialDrop-forged steel FinishBlack oxide HandlesBi-material, three-zone Set weight0.305 kg Pack dimensions300 x 180 x 35 mm Warranty1 year limited manufacturer warranty Questions and Answers Which three pliers are in the set? Combination pliers STHT0-74456, diagonal cutting pliers STHT0-74362 and long nose pliers STHT0-74363. All three are 150 mm and each carries its article number stamped on the tool. What is the difference between the diagonal cutters and the cutting section of the combination pliers? The diagonal cutters cut close to a surface because the edge runs right to the tip, and they give a cleaner cut for less effort. The cutting section on the combination pliers sits at the base of the jaws and is there for when that tool is already in your hand. Will they cut hardened wire and nails? No. Pliers with plain steel edges notch when used on hardened steel - nails, spring wire, screws. That job needs cutters with induction-hardened edges, explicitly rated for hard wire. Are the handles insulated for live working? No. The bi-material handles are for grip and comfort, not electrical insulation. Live working requires pliers tested to VDE / IEC 60900 and marked 1000 V, and this range is not. What do the three handle zones mean? A guard zone at the base that stops the hand sliding onto the cutting edge; a strength zone in the middle where the palm bears during a cut; and a control zone at the end from which the pliers are opened and steered with the fingers. The split is functional rather than cosmetic. Will they rust? The black oxide finish slows corrosion but is not a barrier coating in the way chrome plating or stainless steel is. If the tools work in damp conditions, wipe them down and give them an occasional light film of machine oil. Is the set suitable for electrical work? Yes, for ordinary dead work - sizing and cutting conductor, forming a tail, gripping small fasteners in a confined space. Live working still requires dedicated VDE pliers; this set does not replace them. ..

Knipex 16 95 01 SB Cable Stripping ToolDescription: The Knipex 16 95 01 SB electrical tool is designed for convenient and efficient processing of various standard cables, including round cables such as NYM (3 x 1.5 mm2 to 5 x 2.5 mm2), data cables (e.g., twisted pairs), and coaxial cables. This innovative tool features an ergonomic revolving handle designed for easy cutting, stripping, and longitudinal cutting of cable insulation. The tapered tips of the tool ensure better accessibility. It features a stripping attachment suitable for cross-sections from 0.2 to 4 mm2. The easy positioning of individual conductors for stripping is facilitated by guide marks. Coaxial and data cables can be comfortably positioned using a special opening mechanism. The tool features a multi-component design that includes an ergonomic grip area, ensuring comfort and control during use. The tool body is made of durable, glass-fiber-reinforced plastic, ensuring durability and reliability when used in various conditions. Technical specifications:Round cable stripping specifications (diameter): 8-13 mmStranded wire and cable with stripped insulation: 0.2-4.0 mm2Data cable stripping range: CAT 5 - 7, Twisted Pair (UTP/STP)Coaxial cable stripping specifications (diameter): 4.8 - 7.5 mmLength: 135 mmWeight: 0.075 kg..

Knipex 71 01 200 Rebar and Bolt Cutting PliersDescription: The Knipex 71 01 200 rebar and bolt cutting pliers, with a length of 200 mm and a cutting capacity of up to 6 mm, are exceptionally functional tools that provide superior cutting performance with minimal effort. Thanks to a special lever mechanism, they require up to 60% less physical effort while simultaneously delivering cutting force up to 20 times greater than that of standard pliers. These pliers are suitable for various types of materials and objects, including bolts, nails, rivets, and similar items with a diameter of up to Ø 4.4 mm. In addition, they are successfully used for cutting soft and hard wire, as well as piano wire-high-strength polished wires designed for use in musical instruments-thanks to their precision-cut edges. They are made of oil-hardened, forged heavy-duty steel, which ensures their durability and reliability. Additionally, the pliers are equipped with induction-hardened cutting edges with an approximate hardness of 64 HRC CrV, which ensures sharp edges for more efficient cutting and a longer tool life. Technical specifications:Length: 200 mmJaw coating: phosphatedHandle insulation: single-componentCutting capacity for plastics, copper: 6 mm ØCutting capacity for wire, nails: 5.2 mmCutting capacity for stranded steel wire: 4 mmCutting capacity for spring steel wire: 3.6 mm ØStandard: DIN ISO 5743Weight: 0.335 kg..

Knipex 71 72 760 Rebar ShearsDescription:Knipex 71 72 760 rebar shears with a length of 760 mm and a cutting capacity up to a hardness of 48 HRC. The cutting edges undergo additional induction hardening, thereby achieving a hardness of approximately 62 HRC. The product is made of special tool steel; the handles are made of steel, and the blade is made of forged, oil-hardened chrome-vanadium steel. The shears feature ergonomic handles equipped with a non-slip two-component coating, which ensures greater efficiency during use. Additionally, there are 12 adjustment positions via an eccentric bolt, allowing for individual adjustment of the tool depending on the user's specific needs. For the operator's convenience, the pliers are equipped with a stopper and a comfortable shock absorber. It features a replaceable cutting head, which allows for easy maintenance and long-term use of the tool. Technical specifications:Length: 760 mmHead thickness: 36.5 mmCutting edge length: 42 mmHRC 19: 11 mmHRC 40: 9 mmHRC 48: 8 mmMaterial: special tool steel12 adjustment positionsCutting capacity: 11 mmWeight: 4.25 kghttps://youtu.be/LKd4Mr_Cq0E?si=UzNu7v5R8Qlr77-S..

Knipex 71 72 910 Rebar ShearsDescription:Knipex 71 72 910 rebar shears with a length of 910 mm and a cutting capacity up to a hardness of 48 HRC. The cutting edges undergo additional induction hardening, thereby achieving a hardness of approximately 62 HRC. The product is made of special tool steel; the handles are made of steel, and the blade is made of forged, oil-hardened chrome-vanadium steel. The shears feature ergonomic handles equipped with a non-slip two-component coating, which ensures greater efficiency during use. Additionally, there are 12 adjustment positions via an eccentric bolt, allowing for individual adjustment of the tool depending on the user's specific needs. For the operator's convenience, the pliers are equipped with a stopper and a comfortable shock absorber. It features a replaceable cutting head, which allows for easy maintenance and long-term use of the tool. Technical specifications:Length: 910 mmHead thickness: 36.5 mmHRC 19: 13 mmHRC 40: 10 mmHRC 48: 9 mmMaterial: special tool steelCutting capacity: 13 mmWeight: 4.95 kghttps://youtu.be/LKd4Mr_Cq0E?si=UzNu7v5R8Qlr77-S..

Knipex 90 70 220 Revolving PliersDescription: Knipex 90 70 220 revolver-style punch pliers are 220 mm long and made of special hardened tool steel. They feature a powder-coated finish that provides reliable protection against rust and extends their service life. They are used for punching holes in leather, textiles, and plastic. They feature 6 holes with different diameters: 2.0 mm, 2.5 mm, 3.0 mm, 3.5 mm, 4.0 mm, and 5.0 mm, allowing the user to select the appropriate size for the specific task. In addition, they are equipped with a spring-loaded opening mechanism that makes them easy to use, as well as a locking mechanism that keeps them closed for greater safety and convenience during storage. Technical specifications:Length: 220 mmPliers range: 2-5 mmMaterial: special hardened tool steel6 standard holes: 2.0 / 2.5 / 3.0 / 3.5 / 4.0 / 5.0 mm diameterSpecial anti-rust coatingWeight: 0.251 kg..

DeWALT DWHT0-70485 PliersDescription: The DeWALTDWHT0-70485 pliers set is made of induction-hardened steel and features a two-component handle, ensuring high durability and corrosion resistance. The set includes combination pliers with an innovative design featuring a long lever-long handles for maximum cutting power. With flat, long, pointed jaws suitable for gripping and cutting. All pliers feature a locking mechanism for easy storage. The second type of pliers has standard jaws, used for pulling objects or gripping items that are difficult to grasp with bare hands. These pliers have rounded jaws that prevent damage to small or delicate objects. The set also includes high-performance pliers for cutting metal, such as metal pipes, etc. Technical specifications:Brand: DeWALTModel: DWHT0-70485Material: Induction-hardened steel Handle material: Bi-componentApplication: for gripping and cuttingQuantity per package: 3 pcsWeight: 0.950 kg..

Knipex 70 06 180 Wire-Cutting PliersDescription: The Knipex 70 06 180 insulated side-cutting pliers are characterized by high efficiency and durability, making them indispensable tools for both professional and home use. With their 180 mm jaws, they offer great flexibility when working in various situations. Made of forged and oil-hardened chrome-vanadium steel, these pliers are exceptionally strong and durable. The two-component insulation on the handles ensures comfort and safety during use, protecting hands from unwanted impacts and providing a better grip. With a blade hardness of approximately 62 HRC, they ensure precise and easy cutting of various materials. Cutting specifications include copper wire with a diameter of up to 4 mm, ensuring a clean and precise cut, hard wire with a diameter of 2.5 mm, and medium-hardness wire with a diameter of up to 3 mm. Technical specifications:Material: CrV steelInsulation type: VDE coatingVDE tested at 1000V: yesJaw shape: side-sharpenedRockwell hardness: 62 HRCCutting capacity for soft wire: 4 mmCutting capacity for medium-hard wire: 3 mmHard wire cutting capacity: 2.5 mmJaw coating: chrome-platedManufacturing method: induction hardened, forged, temperedStandard: DIN ISO 5749, DIN EN 60900Length: 180 mm..

Knipex 74 06 180 Reinforcing Bar CuttersDescription:Knipex 74 06 180 insulated side-cutting pliers are specially designed for comfort and reliability during use, delivering high performance even under heavy loads. Their forged pivot pins ensure durability under very high and prolonged loads. An optimal combination of cutting angle and gear ratio allows these pliers to achieve high cutting efficiency with minimal force. They are ideal for all types of wire, including hardened steel, ensuring precise and clean cuts without unnecessary effort. The cutting edges are induction-hardened to a hardness of approximately 64 HRC, ensuring a long tool life and maintaining sharpness even under intensive use. Made of chrome-vanadium steel, these pliers are forged and oil-hardened, giving them exceptional strength and wear resistance. Technical specifications:Cutting capacity for medium-hard wire: 3.8 mm ØCutting capacity for piano strings: 2.2 mmCutting capacity for hard wire: 2.7 mm ØLength: 180 mmPliers: chrome-platedHandles: insulated with multi-component handles, VDE-tested..

Knipex 73 06 160 Wire-Cutting PliersDescription:Knipex 73 06 160 insulated side-cutting pliers stand out for their exceptional efficiency and ease of use thanks to their innovative design. With X-Cut technology, these pliers are 25% lighter than standard models, while requiring 40% less force to operate compared to similar pliers of the same length. Ideal for powerful and precise cutting, they handle everything from the finest wires to multi-strand cables and steel wires. With a wide opening for thicker cables, they offer versatile application across various work areas. They are made of chrome-vanadium high-strength steel, forged and oil-hardened multiple times, ensuring their durability and reliability. The pliers have a length of 160 mm and a cutting diameter of up to 4.8 mm. They are also equipped with a built-in loop for attaching a tool belt, making them convenient and easy to store and carry. Technical specifications:Length, mm: 160 mmSeries: X-CutMaterial: CrV steelInsulation type: VDE coatingTested at 1000V VDE: yesJaw shape: side-cuttingCutting capacity for soft wire: 4.8 mmCutting capacity for medium-hard wire: 3.8 mmHard wire cutting capacity: 2.7 mmPiano wire cutting capacity: 2.2 mmJaw coating: chrome-platedManufacturing method: forged, hardenedStandard: DIN ISO 5749, IEC 60900, DIN EN 60900..

Bosch Professional VDE Diagonal Cutting Pliers 160 mm, 1600A02ND9DescriptionThe Bosch Professional 1600A02ND9 are VDE-certified diagonal cutting pliers designed for safe cutting of wires, cables, and other materials during electrical installation and maintenance work. Certified according to VDE standards, they are suitable for working on live electrical systems up to 1000 V AC, when used in accordance with applicable safety regulations. The cutting edges are manufactured from high-quality hardened tool steel, delivering clean cuts, excellent wear resistance, and a long service life. Ergonomic dual-component insulated handles provide a secure grip and comfortable handling during extended use. With an overall length of 160 mm, these compact diagonal cutters are ideal for working in confined spaces and are well suited for professional electricians, installers, and maintenance technicians.Technical Specifications Brand: Bosch Professional Type: Diagonal cutting pliers Length: 160 mm Insulation: VDE certified up to 1000 V AC Material: Hardened tool steel Handles: Ergonomic dual-component insulated grips Applications: Cutting wires and cables Electrical installation Maintenance and service work Package Includes 1 pc. Bosch Professional VDE Diagonal Cutting Pliers 160 mm..

Stanley 1-69-100 Stud Crimping Pliers for Drywall Profiles Stanley 1-69-100 is a hand tool for permanently joining metal drywall profiles without screws or rivets. The joint is made with a single squeeze by cold-folding the sheet metal. How the joint works The jaws punch through both profiles and fold the cut tabs into one another, producing a cold mechanical lock. The metal is deformed rather than pierced and clamped, so the joint does not work loose under vibration, and there is no screw head protruding above the profile to stop the board sitting flat. Why not screws This is the main practical benefit. Self-tapping screws need separate driving, they protrude, and when boarding you have to think about where they land. Crimping is faster, needs no consumable and leaves a flat surface. Building partitions and suspended ceilings, the difference in pace shows up in the first room. Capacity The pliers work with sheet up to 0.8 mm per profile and U-sections up to 1.2 mm total thickness. That covers the standard CD, UD, CW and UW profiles used in drylining. When a screw is still the better choice Crimping is permanent, and that is an advantage until something has to come apart. For temporary structures, for alignment that may still change, and in places the jaws cannot reach - a profile pressed tight against a wall, for instance - a screw remains the only option. In practice the two methods complement each other: crimping takes the great majority of joints and screws cover the exceptions. One-handed operation The lever ratio is sized so that punching and folding happen one-handed with moderate effort. That matters when the other hand is holding the profile in place - which, working overhead, it almost always is. The handles carry non-slip vinyl grips with stops that keep the hand from sliding towards the jaws. Who it is for The tool is aimed at drylining installers building suspended ceilings and partition walls. It has a hanging ring for a belt, which is practical on a ladder or scaffold - the pliers are used every half metre of profile, and returning them to the bag each time is wasted movement. Technical specifications Order number1-69-100 TypeStud crimping pliers PrincipleCold folding, no screws or rivets Sheet thicknessup to 0.8 mm per profile U-shaped profilesup to 1.2 mm total thickness OperationOne-handed ConstructionSteel HandlesNon-slip vinyl with stops HangingBelt ring Applications Building plasterboard partition walls Suspended ceilings and CD/UD profile frames Joining CW and UW profiles Lining and drylining in refurbishment Questions and Answers How does the joint hold without a screw? The jaws punch through both profiles and fold the cut tabs into each other, producing a cold mechanical lock. The joint is permanent and does not work loose under vibration, since there is no thread to undo. What sheet thickness does it take? Up to 0.8 mm per profile, and with U-sections the combined thickness can reach 1.2 mm. That covers the standard drylining profiles - CD, UD, CW and UW. Thicker sheet calls for a different joining method. Why is it better than driving screws? Three reasons: it is faster - one squeeze against driving a screw; it needs no consumable, so you do not run out of screws halfway through a floor; and it leaves a flat surface, so the board sits true with no screw head propping it up. Can it be used one-handed? Yes, the lever ratio is sized for exactly that. The other hand stays free to hold the profile - which, working overhead and aligning verticals, is effectively essential. Can the joint be taken apart? Not in any normal way - which is why it is called permanent. The tabs are folded irreversibly and separating them usually deforms the profile. In practice that means alignment must be checked before the squeeze, not after. Does it need a consumable? No. The joint is made from the profiles' own material - no screws, rivets or clips to buy and carry. On a larger job that is part of the saving, on top of the time. Does it need maintenance? Little. The joints and moving parts take a drop of machine oil now and then, and the jaws want clearing of metal swarf. The main thing is not to use the tool on material thicker than intended - that is what bends the jaws. ..

Forged steel, two-piece ergonomic handle. Hardened cutting edge. Mechanism that amplifies applied force.Brand: Stanley Material: steel Model: FMHT0-72415 Packaging/pcs: 3 pcs. Series: FatMax Weight: 1.07 kg..