Gargi pliers for a secure grip during in..
Crimping pliers for precise and durable ..
Brand: Milwaukee
Stock: In Stock
Milwaukee 4932498270 Multifunction Cable ToolDescription:The Milwaukee 4932498270 cable stripping tool is designed for fast, precise, and safe work on electrical installations. It is suitable for stripping all standard round cables with a diameter of 6 to 13 mm, as well as flat cables, and automatically switches from round to longitudinal cutting for maximum convenience. The cutting depth is easily adjustable from 0 to 3 mm via a locking screw, allowing for precise adaptation to the type of insulation. The tool features a built-in function for bending wires into coils and can strip all standard stranded and solid wires with cross-sections of 0.5, 0.8, 1.5, 2.5, 4.0, and 6.0 mm2. The ergonomically shaped handle and non-slip housing ensure a secure grip and full control during operation, even during prolonged use.Technical specifications:Cable diameter: 6-13 mmConductor cross-section: 0.5-6 mm2Length: 125 mmType: strippingMaterial: plastic..
50.39€
Ex Tax:41.99€
Brand: Milwaukee
Stock: In Stock
Milwaukee Circlip Pliers Set, 9 Pieces, 4932492496
Milwaukee 4932492496 is a set of nine circlip pliers (snap ring pliers) with convertible internal and external action. The set covers the three main tip angles and three main sizes, making it a complete solution for service and assembly work.
Internal / external conversion
This is the range's defining feature. Each plier has a metal grooved conversion dial that reverses the direction of action - closing for external rings or opening for internal ones. Instead of two separate pliers per size, you carry one. The dial is all metal rather than plastic - which is exactly where cheap pliers work loose and start losing accuracy after a few months.
Coverage of the set
The nine pieces are split across small, medium and large sizes, each in straight, 45° and 90° tip configurations. Tip diameters are 0.9 mm, 1.2 mm and 1.8 mm. The angled versions are what make the difference in enclosed housings, where straight pliers cannot reach the ring.
Grip and accuracy
The handles carry double-dipped slip-resistant grips. With circlips, tip accuracy matters directly: a ring that flies off is lost time at best and an injury at worst. A solid joint and well-matched tips hold the ring while it is being expanded.
Storage
The set comes in a rack with a magnetic base and a carrying handle. The magnet lets the holder attach to a metal surface - an engine cover, a cabinet or a bench - so the pliers sit at hand height rather than being hunted for in a drawer.
Who it is for
The set is aimed at vehicle workshops, hydraulic and pneumatic repair, industrial maintenance and any work with bearings, shafts and gearing where circlips are the standard axial fixing. For one-off use a full set is overkill - its point is having every size on hand without interrupting the job.
Technical specifications
Article number4932492496
Pieces9
TypeCirclip (snap ring) pliers
ActionConvertible - internal and external rings
Conversion mechanismMetal grooved dial
SizesSmall, medium and large
Tip anglesStraight, 45°, 90°
Tip diameters0.9 mm / 1.2 mm / 1.8 mm
HandlesDouble-dipped slip-resistant
StorageRack with magnetic base
Contents
9 x circlip pliers with internal/external conversion
Rack with magnetic base and carrying handle
Questions and Answers
What are circlip pliers for?
For fitting and removing snap rings - sprung elements that locate bearings, shafts and bushes axially. The plier tips enter the two holes in the ring and expand or compress it. Without dedicated pliers the ring almost always deforms or flies off.
What does internal / external conversion mean?
Internal rings sit in a bore and are compressed to fit, while external rings wrap a shaft and are expanded. Normally that calls for two different tools. Here the metal grooved dial reverses the action of the same plier, which effectively doubles the set's coverage.
Which sizes are included?
Small, medium and large, each with straight, 45° and 90° tips - nine pieces in total. Tip diameters are 0.9 mm, 1.2 mm and 1.8 mm, covering the great majority of circlips in automotive and industrial equipment.
Why are angled tips needed?
Because the ring is rarely out in the open. Working inside a gearbox housing, a cylinder or behind another part, straight pliers simply will not reach. The 45° and 90° versions let the tips enter the ring's holes while the body of the plier stays outside.
Why is the conversion dial metal?
The dial takes the whole load during conversion and in use. In plastic it wears, the joint loosens and the tips stop meeting - and misaligned tips mean a ring that flies off. A metal dial keeps the joint accurate for considerably longer.
How is the set stored?
In a rack with a magnetic base and a handle. The magnet lets the holder attach to a metal surface - an engine cover, cabinet or trolley - so all nine pliers stay visible and at hand height while working.
Who is the set suitable for?
For vehicle workshops, hydraulic and pneumatic repair, industrial maintenance and any work with bearings and gearing. For one-off use a full set is overkill - the point is having every size and angle available without stopping to hunt for the right tool.
..
208.89€
Ex Tax:174.08€
Brand: Milwaukee
Stock: In Stock
Manufacturer: Milwaukee
Length: 180 mm
Jaw opening: up to 26 mm
Designed for cutting hard and soft materials such as high-carbon steel, copper, plastic, insulated wires, and others...
-11%
24.40€ 27.55€
Ex Tax:20.33€
Brand: Milwaukee
Stock: In Stock
Milwaukee 4932493926 Fence PliersDescription:
The Milwaukee 4932493926
Fence Pliers are an exceptionally powerful and versatile tool, ideal for various applications in fence installation and repair. Their versatile design includes a staple puller, staple remover, fence wire cutter, and more. The pliers' head is forged, ensuring exceptional strength and durability for the toughest applications. The ergonomic handle design is engineered to provide comfort and ease of use while offering optimal grip and control. Last but not least, the black oxide coating protects the tool from rust and provides long-lasting protection, especially in harsh job site conditions. These pliers are reliable and powerful tools for any project involving fence installation or maintenance.
Technical Specifications:Suitable for: fencingCoating: black oxideFunctions: 6..
35.79€
Ex Tax:29.83€
Brand: Milwaukee
Stock: In Stock
Milwaukee 4932492501 Hose PliersDescription:
The Milwaukee 4932492501 Hose Pliers are designed with deep-reach cross-grip handles that provide maximum access in tight spaces. Their design allows for precise and comfortable access to hard-to-reach areas, making them exceptionally functional for professional use. These pliers feature multi-purpose gripping areas suitable for working with a variety of materials, including screws, cables, and round parts. The single-joint gripping system provides greater control and better grip compared to traditional double-jointed tools. The rounded tips are specially designed for safely gripping hoses without risk of damaging the material. This makes the pliers ideal for sensitive and delicate applications where precision is required.
Technical specifications:Diameter: 12.7 mmLength: 324 mm..
-28%
31.19€ 43.61€
Ex Tax:25.99€
Brand: Milwaukee
Stock: In Stock
Milwaukee 48226101 Electrician's Pliers / 203 mm
The Milwaukee 48226101
extended pliers are particularly suitable for gripping, bending, and adjusting in tight spaces. Suitable for cutting wires up to 2.5 mm. Serrated jaws for better grip and excellent control. Laser-hardened durable blades made of precision-hardened chrome-vanadium steel, resistant to wear and with good corrosion protection. Ergonomic and durable rubberized handles add comfort during use and extend service life.
Technical specifications:Brand: Milwaukee;Length: 203 mm;Jaw length: 51 mm;Cutting capacity: 2.5 mm;Cable diameter: 6 mm;Material: Chrome-vanadium steel;Quantity per package: 1 pc.Weight: 0.500 kg...
-37%
25.05€ 39.46€
Ex Tax:20.88€
Brand: Milwaukee
Stock: In Stock
Manufacturer:
Milwaukee
Model:
4932464575
Milwaukee accessory part number 4932464575
Description:
Tested up to 10,000 volts and guaranteed up to 1,000 volts. Cold-tested down to -40 °C. Total length 160 mm. VDE (DIN EN/IEC 60900) certified tools.
The steel blades are fully forged, hardened, and tempered for maximum durability.
Precision-machined joint for maximum power transfer with optimal leverage for easy and effortless operation.
Ergonomic soft-grip handle for comfortable operation and a secure grip. The gray titanium coating is non-reflective and ensures maximum corrosion resistance. Induction-hardened cutting edges to cut through even the hardest materials.
The set includes:
1x - 4932464564 - 205 mm VDE long-nose pliers
1x - 4932464572 - 180 mm VDE combination pliers
1x - 4932464567 - 160 mm VDE diagonal cutter..
-39%
72.00€ 118.49€
Ex Tax:60.00€
Brand: Milwaukee
Stock: In Stock
Milwaukee Pliers Wrench Set, 180 mm and 250 mm, Smooth Jaws, 2 Piece, 4932501152
4932501152 is a pair of Milwaukee pliers wrenches - one 180 mm long, one 250 mm. Both grip nuts and pipe fittings on smooth parallel jaws rather than on teeth, and both set their opening from a button pressed directly on the workpiece, without letting go of the handles.
Why two sizes
The two tools cover different ground. The 180 mm wrench reaches into tight work and is handled one-handed - under a sink, behind a radiator, inside a cabinet. The 250 mm wrench gives a longer lever and a wider opening, so it takes the big pipe nuts and joints pulled up hard.
The smooth jaws
The gripping faces on both tools are smooth. That is what separates them from ordinary water pump pliers, and why they suit chrome-plated and polished work - traps, nickel-plated pipe, coated fittings, tap tails. The toothed strip in the middle of each tool is the adjustment rack, not the jaw.
Push-button adjustment and ratcheting action
The opening is changed with a quick-adjust button, pressed by the thumb of the hand already holding the tool. The jaw slides to the size of the nut and the button is released. In use there is a ratcheting action: after each pull the handles relax and travel back without the tool coming off the nut - in a confined space, the only way to work at a sensible speed.
Scales, capacity and handles
Imperial graduations are engraved on the jaws. On the 250 mm wrench the scale ends at 2 1/4", matching its stated 57 mm maximum capacity. On the 180 mm wrench the last mark is 1 3/4", roughly 44 mm. Some trade listings quote a higher figure for the smaller tool; we go by the scale engraved on the tool itself. Both wrenches have fully dipped handles.
Technical specifications
ManufacturerMilwaukee
Article number4932501152
TypePliers wrench set with smooth parallel jaws
Pieces2
Length of smaller wrench180 mm
Length of larger wrench250 mm
Maximum capacity (250 mm)57 mm
Maximum capacity (180 mm)about 44 mm (last mark 1 3/4" on the tool's own scale)
JawsSmooth, parallel
AdjustmentQuick-adjust button, used on the workpiece
ActionRatcheting, no repositioning
Imperial scale (180 mm)up to 1 3/4"
Imperial scale (250 mm)up to 2 1/4"
MaterialSteel
Weight of the setabout 0.75 kg (trade listing figure, not confirmed by Milwaukee)
EAN4058546624545
What is in the set
1 x Milwaukee 180 mm pliers wrench (4932501149)
1 x Milwaukee 250 mm pliers wrench (4932501150)
Questions and Answers
What is in the set?
Two Milwaukee pliers wrenches - one 180 mm and one 250 mm, two pieces in all. The article number of the set is 4932501152.
How does a pliers wrench differ from water pump pliers?
In the jaws. Water pump pliers have teeth and bite into the work, whereas these jaws are smooth and parallel and sit on the flats of the nut like a spanner. The tool holds without leaving marks.
Will they scratch chrome pipe or a polished fitting?
The gripping faces on both tools are smooth, which is exactly what chrome-plated and polished work needs. The toothed strip in the middle of the tool is the adjustment rack and never touches the workpiece.
What is the maximum jaw capacity?
On the 250 mm wrench it is 57 mm, matching the 2 1/4" mark on the engraved scale. On the 180 mm wrench the last mark is 1 3/4", which is roughly 44 mm. Some trade listings quote a higher figure for the smaller tool; we go by the scale on the tool itself.
How is the size set?
With a quick-adjust button on the tool itself - press it with the thumb, slide the jaw to the size of the nut and let the button go. The handles stay in your hand throughout.
What does ratcheting action mean?
After each pull the handles relax and travel back without the tool leaving the nut. In a confined space that saves the lifting and turning an ordinary spanner demands.
What are the article numbers of the two wrenches on their own?
The 180 mm pliers wrench is listed as 4932501149 and the 250 mm as 4932501150. The set itself is 4932501152.
..
-22%
70.00€ 90.06€
Ex Tax:58.33€
Brand: Milwaukee
Stock: In Stock
Milwaukee 250 mm Pliers Wrench with Smooth Jaws, 4932501150
4932501150 is a 250 mm Milwaukee pliers wrench - it grips nuts and pipe fittings with smooth parallel jaws rather than teeth. Capacity runs to 57 mm, and the setting changes from a button on the tool, without letting go of the handles.
Between a wrench and water pump pliers
A pliers wrench sits between an adjustable spanner and water pump pliers. The jaws stay parallel at every setting and close flat on the faces of a nut, so the load sits on the flats rather than the corners. The action is self-tightening - force on the handles becomes clamping pressure at the jaws, so the harder the grip, the firmer the hold. That is what undoes a tight fitting without reaching for a new spanner at every size.
Why the jaws are smooth
The gripping faces carry no teeth, which is why the tool belongs on chrome and polished work - traps, plated pipe, coated fittings, tap tails. The toothed strip in the middle of the tool is the adjustment rack, not the jaw; what touches the work is smooth metal.
Push-button adjustment and ratcheting
Opening is set with a push-button quick adjust, worked by the thumb of the hand already holding the tool: slide the jaw to the nut and release the button. Turning then gives a ratcheting action - the handles relax and come back for the next bite without lifting the tool off the nut. In a tight space, where a spanner has nowhere to be pulled off and turned over, that matters.
Scale, capacity and handles
The jaw is marked with imperial graduations from 1/2" to 2 1/4", so the size is set in one go, not by trial and error. Maximum capacity is 57 mm, covering pipe nuts, fittings and hex sizes to two and a quarter inches. The handles are dipped, with a rubberised coating over the lower section where the hand sits.
Technical specifications
ManufacturerMilwaukee
Article number4932501150
TypePliers wrench with smooth parallel jaws
Length250 mm (10")
Maximum jaw capacity57 mm
JawsSmooth, parallel, self-tightening
AdjustmentPush-button quick adjust on the tool
ActionRatcheting, no repositioning
Imperial jaw scale1/2", 3/4", 1", 1 1/4", 1 1/2", 1 3/4", 2", 2 1/4"
HandlesDipped handles with a rubberised coating
EAN4058546624521
In the pack
1 x Milwaukee 250 mm pliers wrench (4932501150), in a carded blister pack
Questions and Answers
How is a pliers wrench different from water pump pliers?
The jaws. Water pump pliers have teeth that bite into the work; here the jaws are smooth and parallel and sit flat on the faces of a nut, the way a spanner does. It holds without marking the part.
What is the maximum jaw capacity?
57 mm according to Milwaukee, which matches the 2 1/4" mark at the top of the imperial scale on the jaw.
Will it scratch chrome pipe or a polished fitting?
The gripping faces are smooth, which is exactly what chrome and polished work needs. The toothed strip in the middle of the tool is the adjustment rack and never touches the workpiece.
How is the opening set?
With a push-button quick adjust on the tool itself - press it with the thumb, slide the jaw to the nut and let go. The handles stay in the hand throughout.
What does the ratcheting action do?
After each turn the handles relax and come back for the next bite with the tool still on the nut. In a confined space that saves pulling the tool off and turning it over, as an ordinary spanner needs.
Is there a size scale on the jaw?
Yes - imperial graduations are engraved at 1/2", 3/4", 1", 1 1/4", 1 1/2", 1 3/4", 2" and 2 1/4", so the jaw is set in one go instead of by trial and error.
What comes in the pack?
One Milwaukee 250 mm pliers wrench, article number 4932501150, supplied in a carded blister pack.
..
-37%
31.00€ 49.00€
Ex Tax:25.83€
Brand: Milwaukee
Stock: In Stock
Milwaukee 4932464851 Rebar Cutters, 610-770 mmThe Milwaukee 4932464851 pliers feature telescoping, extendable POWERMOVETM arms ranging from 610 to 770 mm, designed for maximum flexibility and durability and easier cutting in tight spaces. The forged steel blades are heat-treated for maximum durability. The bolt lock secures the hinge bolts to prevent loosening. The comfortable handles won't slip or slide. Strap loops are integrated into the handles for easy attachment.Technical Specifications:Brand: Milwaukee;Model: 4932464851;Blade material: forged steel;Cutting capacity for HRC 48 materials [Max. O mm]: 8 mm;Cutting capacity for HRC 31 materials [Max. O mm]: 11 mm;Blade width (mm): 13 mm;Quantity per package: 1 pc...
-36%
71.07€ 110.96€
Ex Tax:59.23€
Brand: Milwaukee
Stock: In Stock
Milwaukee 4932492487 PliersDescription:
The Milwaukee 4932492487 154 mm
long needle-nose pliers offer reliability and functionality in one. The gray titanium coating protects the pliers from corrosion, ensuring a long service life. The all-metal handles offer high wear resistance, and the dual coating prevents slipping during use. The locking button ensures greater control during use. Easy-to-read size markings for easier identification.
Technical Specifications:Length: 154 mmTip: 0.9 mmTip angle: 18°..
41.38€
Ex Tax:34.48€
Brand: Milwaukee
Stock: In Stock
Milwaukee 4932492488 PliersDescription:
The Milwaukee 4932492488 152 mm
long needle-nose pliers offer reliability and functionality in one. The gray titanium coating protects the pliers from corrosion, ensuring a long service life. The all-metal handles offer high wear resistance, and the dual coating prevents slipping during use. The locking button ensures greater control during use. Easy-to-read size markings for easier identification.
Technical Specifications:Length: 152 mmTip: 0.9 mmTip angle: 45°..
41.38€
Ex Tax:34.48€
Brand: Milwaukee
Stock: In Stock
Milwaukee 4932492491 PliersDescription:TheMilwaukee 4932492491 152 mm
long locking pliers offer reliability and functionality in one. The gray titanium surface coating protects the pliers from corrosion, ensuring a long service life. The all-metal handles offer high wear resistance, and the dual coating prevents slipping during use. The locking button ensures greater control during use. Easy-to-read size markings for easier identification.
Technical Specifications:Length: 152 mmTip: 1.2 mmTip angle: 45°..
46.55€
Ex Tax:38.79€
Brand: Milwaukee
Stock: In Stock
Milwaukee 4932492493 PliersDescription:
The Milwaukee 4932492493 188 mm
long pliers offer reliability and functionality in one. The gray titanium surface coating protects the pliers from corrosion, ensuring a long service life. The all-metal handles offer high wear resistance, and the dual coating prevents slipping during use. The locking button ensures greater control during use. Easy-to-read size markings for easier identification.
Technical Specifications:Length: 188 mmTip: 1.8 mmTip angle: 18°..
-16%
49.08€ 58.19€
Ex Tax:40.90€
Brand: Milwaukee
Stock: In Stock
Milwaukee TORQUE LOCK Curved Jaw Locking Pliers, 102 mm, 4932493618
Milwaukee 4932493618 are locking pliers from the TORQUE LOCK range with curved jaws, 4" (102 mm) long. Jaw capacity is 18 mm and the tool weighs 122 grams.
What locking pliers do
Unlike ordinary pliers, these lock onto the workpiece and stay clamped without you holding them. In practice that is a third hand: grip a nut, a pipe or a piece of sheet, let go, and work with both hands. Clamping force is set with the screw in the handle - once dialled in for a given size, it repeats on every subsequent grip.
The curved jaws
The curved profile is the general-purpose one: it grips flat and round alike. On a round part - pipe, a rounded bolt head, threaded rod - the curve wraps the material at several points instead of pinching it at two. That is exactly why curved jaws are the first choice for backing off rounded heads and damaged nuts, where a spanner no longer bites.
TORQUE LOCK
TORQUE LOCK is the mechanism that gives faster setup and easy release. Release is by lever: press and the pliers open, instead of having to work them loose. In addition, extra force can be applied to the screw for a more secure grip when the workpiece is especially smooth or springy.
Jaws and plating
The jaws are hardened so the teeth do not deform on hard material - with soft jaws the grip weakens after a few uses. The body is chrome plated, which slows corrosion. That matters on a tool often left clamped on a wet workpiece.
The 102 mm size
Four inches is the smallest size in this category. These pliers are for small, close work - inside electrical boxes, in an engine bay, on small fasteners. Larger pipe and section need a 7" or 10" model. At 122 grams they go in a pocket without being noticed.
Technical specifications
ManufacturerMilwaukee
Article number4932493618
RangeTORQUE LOCK
TypeLocking pliers
JawsCurved, hardened
Length4" (102 mm)
Jaw capacityup to 18 mm
Weight122 g
ReleaseLever
FinishChrome plated
Questions and Answers
How do these differ from ordinary pliers?
They lock onto the workpiece and stay clamped without being held. In practice they are a third hand: grip, let go, and work with both hands free.
Why are the jaws curved?
The curve grips flat and round alike. On a pipe or a rounded head it wraps the material at several points rather than two - which is why curved jaws are first choice for damaged nuts and rounded heads.
How is the clamping force set?
With the screw in the handle. Once set for a given size it repeats on every grip after that - you do not readjust each time.
How do they release?
By lever - press and they open. That is part of the TORQUE LOCK mechanism, which also gives the faster setup.
How far do the jaws open?
Up to 18 mm. That is the capacity of the 4-inch size - for larger pipe and section you need a 7" or 10" model.
What is the 4-inch size for?
Small, close work - inside electrical boxes, in an engine bay, on small fasteners. At 122 grams they sit in a pocket unnoticed.
Does the grip weaken over time?
The jaws are hardened, so the teeth do not deform on hard material. With soft jaws that deformation is exactly why the grip fades after a few uses.
..
-24%
13.50€ 17.72€
Ex Tax:11.25€
Brand: Stanley
Stock: In Stock
16-in-1 Multi-Tool in a steel case with black-oxided tools: universal pliers with serrated tips, wire cutter, two small blades, scissors, saw, file, cable stripper, Phillips screwdriver, three flathead screwdrivers, carabiner, ruler, bottle opener, can opener.Brand: Stanley
Model: FMHT0-72414
Series: FatMax
Weight: 0.25 kg..
-27%
14.99€ 20.45€
Ex Tax:12.49€
Brand: Milwaukee
Stock: In Stock
Milwaukee End Cutting Pliers, 180 mm, 48226407DescriptionThe Milwaukee 48226407 are 180 mm end cutting pliers designed for precise cutting of wire, nails, cable ties, and other metal materials. Their compact size provides excellent control, making them ideal for working in confined or hard-to-reach spaces. Manufactured from high-quality hardened steel, the pliers deliver outstanding durability and long service life. Ergonomic handles ensure a secure and comfortable grip, while the precision-ground cutting edges provide clean and efficient cutting performance. The Milwaukee 48226407 is an excellent choice for construction professionals, mechanics, installers, rebar workers, and DIY users looking for a dependable cutting tool.Technical Specifications
Brand: Milwaukee
Type: End cutting pliers
Length: 180 mm
Material: Hardened steel
Handles: Ergonomic
Application: Cutting wire, nails, and other metal materials
Package Includes
1 x Milwaukee End Cutting Pliers, 180 mm..
28.55€
Ex Tax:23.79€
Brand: Milwaukee
Stock: In Stock
Manufacturer:
Milwaukee
Model:
4932464569
Milwaukee accessory part number 4932464569
Description:
Tested up to 10,000 volts and guaranteed up to 1,000 volts. Cold-tested down to -40 °C. Overall length 160 mm. VDE (DIN EN/IEC 60900) certified tools.
The steel blades are fully forged, hardened, and tempered for maximum durability. The gray titanium coating is non-reflective and ensures maximum corrosion resistance. Induction-hardened cutting edges to cut even the hardest materials.
Precision-machined joint for maximum power transfer with optimal levers for easy and effortless operation.
Ergonomic soft-grip handle for comfortable use and a secure grip.
Cutting capacity (in Al and Cu cables): 13 mm
Cutting capacity (in hard wire 1800 N/mm2): 2.6 mm
Cutting capacity (in soft wire 220 N/mm2): 7 mm
Cutting capacity (in very hard wire 2300 N/mm2): 2.2 mm
Total length: 180 mm
Weight: 250 g..
-37%
28.00€ 44.76€
Ex Tax:23.33€
Brand: Milwaukee
Stock: In Stock
Manufacturer:
Milwaukee
Model:
4932464567
Milwaukee accessory part number 4932464567
Description:
Tested up to 10,000 volts and guaranteed up to 1,000 volts. Cold-tested down to -40 °C. Total length 160 mm. VDE (DIN EN/IEC 60900) certified tools.
The steel blades are fully forged, hardened, and tempered for maximum durability. The gray titanium coating is non-reflective and ensures maximum corrosion resistance. Induction-hardened cutting edges to cut through even the hardest materials.
Precision-machined joint for maximum power transmission with optimal levers for easy and effortless operation.
Ergonomic soft-grip handle for comfortable operation and a secure grip.
Cutting capacity (in Al and Cu cables): 11 mm
Cutting capacity (in hard wire 1800 N/mm2): 2 mm
Cutting capacity (in soft wire 220 N/mm2): 6 mm
Overall length: 160 mm
Weight: 210 g..
-18%
32.63€ 40.00€
Ex Tax:27.19€
Brand: Knipex
Stock: In Stock
Knipex 71 72 610 Rebar and Bolt Cutting PliersDescription:Knipex 71 72 610
rebar and bolt cutting pliers with a length of 610 mm and a cutting capacity up to 48 HRC. The cutting edges undergo additional induction hardening, thereby achieving a hardness of approximately 62 HRC. The product is made of special tool steel; the handles are made of steel, and the blade is made of forged, oil-hardened chrome-vanadium steel. The shears feature ergonomic handles equipped with a non-slip two-component coating, which ensures greater efficiency during use. Additionally, there are 12 adjustment positions via an eccentric bolt, allowing for individual adjustment of the tool depending on the user's specific needs. For the operator's convenience, the pliers are equipped with a stopper and a comfortable shock absorber. It features a replaceable cutting head, which allows for easy maintenance and long-term use of the tool.
Technical specifications:Length: 610 mmHead thickness: 33 mmCutting edge length: 34 mmHRC 19: 9 mmHRC 40: 8 mmHRC 48: 7 mmMaterial: special tool steelCutting capacity: 11 mmWeight: 2.55 kg..
-20%
122.71€ 153.39€
Ex Tax:102.26€