Hand tools - Page 26

Pica VISOR permanent Refill Leads, Blue, 4 pcs - 991/41 Pica 991/41 is an Easy Refill Pack with 4 blue refill leads for the Pica VISOR permanent marker (990 range). On the pack the manufacturer labels them as MULTI-USE wax leads for dry and wet surfaces, and in its product sheet as a water-resistant marking crayon for marking on almost all materials. Each lead measures 10 mm in diameter and 85 mm in length. For the Pica VISOR permanent marker The leads are made to refill the Pica VISOR permanent Longlife Industrial Marker - a marker with a twist mechanism and a 10 mm tip. Thanks to the twist mechanism the lead is replaced quickly and easily, and Pica stresses that refilling takes only seconds. The leads are stored in the plastic Easy Refill Pack, which opens with a pull tab (marked PULL). A marking that never dries out According to the manufacturer the wax lead never dries out and writes at full performance from the first to the very last line. The marking is water-resistant and extremely hard-wearing, which is why Pica recommends the range especially for outdoor work - on rough or wet surfaces. The manufacturer also states that one lead replaces up to 5 conventional ink or paint markers, and the low consumption and quick refilling make the solution economical and environmentally friendly. Surfaces For the 991 refills Pica lists tiles, plastic, metal, wood, rubber, wet rubber, wet wood, leather and brick as suitable surfaces. The manufacturer warns that the leads should not be exposed to temperatures above 40 °C, so do not leave them in a hot car or in direct sunlight. Chloride-free colours The blue refills 991/41 are among the colours Pica marks as chloride-free - together with blue, white and black. The manufacturer names them explicitly for marking on stainless steel. Colours in the range The VISOR permanent refills come in seven colours: green (991/36), red (991/40), blue (991/41), yellow (991/44), black (991/46), white (991/52) and fluo orange (991/054). This page is for variant 991/41 - blue. Pica also offers the red, blue, yellow and white refills in a hanging blister (suffix /SB). Technical specifications ManufacturerPica-Marker (PICA) Article991/41 RangePica VISOR permanent (Innovative Line) TypeMULTI-USE wax refill leads, Easy Refill Pack ColourBlue Pieces per pack4 leads Lead sizeØ 10 mm, length 85 mm CompatibilityPica VISOR permanent marker (990 range) SurfacesTiles, plastic, metal, wood, rubber, wet rubber, wet wood, leather, brick TemperatureDo not expose to temperatures above 40 °C ChloridesChloride-free - suitable for stainless steel EAN (from the pack)4260056153723 Questions and Answers Which marker are these refills for? For the Pica VISOR permanent Longlife Industrial Marker of the 990 range. The marker has a twist mechanism that makes changing the lead quick and easy. How many leads are in the pack? The Easy Refill Pack contains 4 blue leads, each 10 mm in diameter and 85 mm long. Do they write on wet surfaces? Yes. On the pack Pica states that the leads are for dry and wet surfaces, and the listed materials include wet wood and wet rubber. Do the leads dry out over time? According to the manufacturer the wax lead never dries out and writes at full performance from the first to the very last line. Pica also states that one lead replaces up to 5 conventional ink or paint markers. Is there a temperature limit? Yes. Pica recommends not exposing the leads to temperatures above 40 °C, so do not leave the marker and spare leads in a car in the sun. Are they suitable for stainless steel? Yes. Pica marks the blue refills as chloride-free and names them for marking on stainless steel. The same applies to the white and black refills of the range. Which other colours are available? The range has seven colours: green 991/36, red 991/40, blue 991/41, yellow 991/44, black 991/46, white 991/52 and fluo orange 991/054. ..

Pica VISOR permanent Refill Leads, Red, 4 pcs - 991/40 Pica 991/40 is an Easy Refill Pack with 4 red refill leads for the Pica VISOR permanent marker (990 range). On the pack the manufacturer labels them as MULTI-USE wax leads for dry and wet surfaces, and in its product sheet as a water-resistant marking crayon for marking on almost all materials. Each lead measures 10 mm in diameter and 85 mm in length. For the Pica VISOR permanent marker The leads are made to refill the Pica VISOR permanent Longlife Industrial Marker - a marker with a twist mechanism and a 10 mm tip. Thanks to the twist mechanism the lead is replaced quickly and easily, and Pica stresses that refilling takes only seconds. The leads are stored in the plastic Easy Refill Pack, which opens with a pull tab (marked PULL). A marking that never dries out According to the manufacturer the wax lead never dries out and writes at full performance from the first to the very last line. The marking is water-resistant and extremely hard-wearing, which is why Pica recommends the range especially for outdoor work - on rough or wet surfaces. The manufacturer also states that one lead replaces up to 5 conventional ink or paint markers, and the low consumption and quick refilling make the solution economical and environmentally friendly. Surfaces For the 991 refills Pica lists tiles, plastic, metal, wood, rubber, wet rubber, wet wood, leather and brick as suitable surfaces. The manufacturer warns that the leads should not be exposed to temperatures above 40 °C, so do not leave them in a hot car or in direct sunlight. Chloride-free colours If you mark stainless steel, choose one of the chloride-free colours. Pica marks the blue (991/41), white (991/52) and black (991/46) refills as chloride-free and names them precisely for marking on stainless steel. The manufacturer gives no such designation for the red refills. Colours in the range The VISOR permanent refills come in seven colours: green (991/36), red (991/40), blue (991/41), yellow (991/44), black (991/46), white (991/52) and fluo orange (991/054). This page is for variant 991/40 - red. Pica also offers the red, blue, yellow and white refills in a hanging blister (suffix /SB). Technical specifications ManufacturerPica-Marker (PICA) Article991/40 RangePica VISOR permanent (Innovative Line) TypeMULTI-USE wax refill leads, Easy Refill Pack ColourRed Pieces per pack4 leads Lead sizeØ 10 mm, length 85 mm CompatibilityPica VISOR permanent marker (990 range) SurfacesTiles, plastic, metal, wood, rubber, wet rubber, wet wood, leather, brick TemperatureDo not expose to temperatures above 40 °C EAN (from the pack)4260056153716 Questions and Answers Which marker are these refills for? For the Pica VISOR permanent Longlife Industrial Marker of the 990 range. The marker has a twist mechanism that makes changing the lead quick and easy. How many leads are in the pack? The Easy Refill Pack contains 4 red leads, each 10 mm in diameter and 85 mm long. Do they write on wet surfaces? Yes. On the pack Pica states that the leads are for dry and wet surfaces, and the listed materials include wet wood and wet rubber. Do the leads dry out over time? According to the manufacturer the wax lead never dries out and writes at full performance from the first to the very last line. Pica also states that one lead replaces up to 5 conventional ink or paint markers. Is there a temperature limit? Yes. Pica recommends not exposing the leads to temperatures above 40 °C, so do not leave the marker and spare leads in a car in the sun. Are they suitable for stainless steel? Pica marks only the blue (991/41), white (991/52) and black (991/46) refills as chloride-free and suitable for stainless steel. The manufacturer does not state this for the red refills, so choose one of those colours for stainless steel. Which other colours are available? The range has seven colours: green 991/36, red 991/40, blue 991/41, yellow 991/44, black 991/46, white 991/52 and fluo orange 991/054. ..

Pica VISOR permanent Refill Leads, White, 4 pcs - 991/52 Pica 991/52 is an Easy Refill Pack with 4 white refill leads for the Pica VISOR permanent marker (990 range). On the pack the manufacturer labels them as MULTI-USE wax leads for dry and wet surfaces, and in its product sheet as a water-resistant marking crayon for marking on almost all materials. Each lead measures 10 mm in diameter and 85 mm in length. For the Pica VISOR permanent marker The leads are made to refill the Pica VISOR permanent Longlife Industrial Marker - a marker with a twist mechanism and a 10 mm tip. Thanks to the twist mechanism the lead is replaced quickly and easily, and Pica stresses that refilling takes only seconds. The leads are stored in the plastic Easy Refill Pack, which opens with a pull tab (marked PULL). A marking that never dries out According to the manufacturer the wax lead never dries out and writes at full performance from the first to the very last line. The marking is water-resistant and extremely hard-wearing, which is why Pica recommends the range especially for outdoor work - on rough or wet surfaces. The manufacturer also states that one lead replaces up to 5 conventional ink or paint markers, and the low consumption and quick refilling make the solution economical and environmentally friendly. Surfaces For the 991 refills Pica lists tiles, plastic, metal, wood, rubber, wet rubber, wet wood, leather and brick as suitable surfaces. The manufacturer warns that the leads should not be exposed to temperatures above 40 °C, so do not leave them in a hot car or in direct sunlight. Chloride-free colours The white refills 991/52 are among the colours Pica marks as chloride-free - together with blue, white and black. The manufacturer names them explicitly for marking on stainless steel. Colours in the range The VISOR permanent refills come in seven colours: green (991/36), red (991/40), blue (991/41), yellow (991/44), black (991/46), white (991/52) and fluo orange (991/054). This page is for variant 991/52 - white. Pica also offers the red, blue, yellow and white refills in a hanging blister (suffix /SB). Technical specifications ManufacturerPica-Marker (PICA) Article991/52 RangePica VISOR permanent (Innovative Line) TypeMULTI-USE wax refill leads, Easy Refill Pack ColourWhite Pieces per pack4 leads Lead sizeØ 10 mm, length 85 mm CompatibilityPica VISOR permanent marker (990 range) SurfacesTiles, plastic, metal, wood, rubber, wet rubber, wet wood, leather, brick TemperatureDo not expose to temperatures above 40 °C ChloridesChloride-free - suitable for stainless steel EAN (from the pack)4260056153761 Questions and Answers Which marker are these refills for? For the Pica VISOR permanent Longlife Industrial Marker of the 990 range. The marker has a twist mechanism that makes changing the lead quick and easy. How many leads are in the pack? The Easy Refill Pack contains 4 white leads, each 10 mm in diameter and 85 mm long. Do they write on wet surfaces? Yes. On the pack Pica states that the leads are for dry and wet surfaces, and the listed materials include wet wood and wet rubber. Do the leads dry out over time? According to the manufacturer the wax lead never dries out and writes at full performance from the first to the very last line. Pica also states that one lead replaces up to 5 conventional ink or paint markers. Is there a temperature limit? Yes. Pica recommends not exposing the leads to temperatures above 40 °C, so do not leave the marker and spare leads in a car in the sun. Are they suitable for stainless steel? Yes. Pica marks the white refills as chloride-free and names them for marking on stainless steel. The same applies to the white and black refills of the range. Which other colours are available? The range has seven colours: green 991/36, red 991/40, blue 991/41, yellow 991/44, black 991/46, white 991/52 and fluo orange 991/054. ..

Pica VISOR permanent Refill Leads, Yellow, 4 pcs - 991/44 Pica 991/44 is an Easy Refill Pack with 4 yellow refill leads for the Pica VISOR permanent marker (990 range). On the pack the manufacturer labels them as MULTI-USE wax leads for dry and wet surfaces, and in its product sheet as a water-resistant marking crayon for marking on almost all materials. Each lead measures 10 mm in diameter and 85 mm in length. For the Pica VISOR permanent marker The leads are made to refill the Pica VISOR permanent Longlife Industrial Marker - a marker with a twist mechanism and a 10 mm tip. Thanks to the twist mechanism the lead is replaced quickly and easily, and Pica stresses that refilling takes only seconds. The leads are stored in the plastic Easy Refill Pack, which opens with a pull tab (marked PULL). A marking that never dries out According to the manufacturer the wax lead never dries out and writes at full performance from the first to the very last line. The marking is water-resistant and extremely hard-wearing, which is why Pica recommends the range especially for outdoor work - on rough or wet surfaces. The manufacturer also states that one lead replaces up to 5 conventional ink or paint markers, and the low consumption and quick refilling make the solution economical and environmentally friendly. Surfaces For the 991 refills Pica lists tiles, plastic, metal, wood, rubber, wet rubber, wet wood, leather and brick as suitable surfaces. The manufacturer warns that the leads should not be exposed to temperatures above 40 °C, so do not leave them in a hot car or in direct sunlight. Chloride-free colours If you mark stainless steel, choose one of the chloride-free colours. Pica marks the blue (991/41), white (991/52) and black (991/46) refills as chloride-free and names them precisely for marking on stainless steel. The manufacturer gives no such designation for the yellow refills. Colours in the range The VISOR permanent refills come in seven colours: green (991/36), red (991/40), blue (991/41), yellow (991/44), black (991/46), white (991/52) and fluo orange (991/054). This page is for variant 991/44 - yellow. Pica also offers the red, blue, yellow and white refills in a hanging blister (suffix /SB). Technical specifications ManufacturerPica-Marker (PICA) Article991/44 RangePica VISOR permanent (Innovative Line) TypeMULTI-USE wax refill leads, Easy Refill Pack ColourYellow Pieces per pack4 leads Lead sizeØ 10 mm, length 85 mm CompatibilityPica VISOR permanent marker (990 range) SurfacesTiles, plastic, metal, wood, rubber, wet rubber, wet wood, leather, brick TemperatureDo not expose to temperatures above 40 °C EAN (from the pack)4260056153754 Questions and Answers Which marker are these refills for? For the Pica VISOR permanent Longlife Industrial Marker of the 990 range. The marker has a twist mechanism that makes changing the lead quick and easy. How many leads are in the pack? The Easy Refill Pack contains 4 yellow leads, each 10 mm in diameter and 85 mm long. Do they write on wet surfaces? Yes. On the pack Pica states that the leads are for dry and wet surfaces, and the listed materials include wet wood and wet rubber. Do the leads dry out over time? According to the manufacturer the wax lead never dries out and writes at full performance from the first to the very last line. Pica also states that one lead replaces up to 5 conventional ink or paint markers. Is there a temperature limit? Yes. Pica recommends not exposing the leads to temperatures above 40 °C, so do not leave the marker and spare leads in a car in the sun. Are they suitable for stainless steel? Pica marks only the blue (991/41), white (991/52) and black (991/46) refills as chloride-free and suitable for stainless steel. The manufacturer does not state this for the yellow refills, so choose one of those colours for stainless steel. Which other colours are available? The range has seven colours: green 991/36, red 991/40, blue 991/41, yellow 991/44, black 991/46, white 991/52 and fluo orange 991/054. ..

Rennsteig Masonry Chisel 200 mm, Octagonal, CrV, 350 200 1 Rennsteig 350 200 1 is a masonry chisel, 200 mm long, on a 16 mm octagonal shank with a 23 mm cutting edge. It weighs 302 g. Forged into the body are 350 200, RENNSTEIG, 200, CrV and the GS mark. Hardened throughout The chisel is made from high-alloy tool steel and is hardened through its whole length, not only at the tip. That brings two things: the hammer blow is conveyed in full into the material rather than absorbed by a soft body, and the tip can be reground repeatedly without reaching an unhardened core. The striking head The back end carries a special safety impact head. On an ordinary chisel the steel at the back mushrooms after a hundred blows - and those sharp lips are dangerous, cutting the hand on the next swing. This construction prevents the splintering and deformation. The octagonal shank Eight flats rather than a round section serve a specific purpose: the chisel does not roll in the hand when struck at an angle. A round shank rotates and the edge wanders off the line, whereas an octagon has eight stable positions and stays where it is set. The finish The body is dip-coated gold. Besides making the tool visible among gravel and rubble, the coating protects the steel from surface corrosion when stored in a damp bag. What it is for The 200 mm length suits close work: breaking out joints, stripping render, chasing brick, freeing a brick from a wall, knocking out old plugs. The longer 300-500 mm sizes keep the hand further from the blow and suit rougher work. Standards The chisel meets or exceeds the requirements of current (DIN) standards and carries GS approval - tested safety by an independent body. EAN 4049002001352. Technical specifications ManufacturerRennsteig Article number350 200 1 TypeMasonry chisel Length200 mm Dimensions200 x 24 x 16 mm Cutting edge width23 mm ShankOctagonal, 16 mm MaterialHigh-alloy tool steel (CrV) HardeningThroughout FinishDip-coated, gold Weight302 g ApprovalGS EAN4049002001352 Questions and Answers What is the length? 200 mm, with a 23 mm cutting edge on a 16 mm octagonal shank. It weighs 302 g. Can the tip be reground? Yes. The chisel is hardened throughout, so the tip can be reground repeatedly without reaching an unhardened core. Why an octagonal shank? So it does not roll in the hand when struck at an angle. A round shank rotates and the edge wanders off the line. What does the safety impact head do? It stops the steel at the back end from mushrooming. On an ordinary chisel those sharp lips cut the hand on the next swing. What work suits the 200 mm length? Close work - breaking out joints, stripping render, chasing brick, knocking out old plugs. What does the GS mark mean? Tested safety by an independent body. The chisel also meets or exceeds the requirements of current DIN standards. What steel is it? High-alloy tool steel, marked CrV on the body itself. ..

Milwaukee 4932480304 SocketDescription: The Milwaukee 4932480304 SHOCKWAVETM IMPACT DUTY 10 mm impact socket is made of high-quality alloy steel, which ensures exceptional strength and durability. It offers the best fit thanks to 6 gripping points and a non-slip hexagonal geometry that prevents rounding of the socket and fastener. Laser-engraved size markings for easy identification and wear resistance. The wall depth is 10 mm, providing clearance for protruding bolts. Dual-hole design with a slot for security accessories. Technical specifications:Size: 10 mm;Outer diameter: 17.5 mm;Length: 38 mm;Working length: 4.6 mm;Material: alloy steel;Grip: 1/2";Quantity per package: 1 pc.;Weight: 0.200 kg...

Manufacturer: Milwaukee Model: 48225211 Description: 3:1 folded planetary gear for 10x greater gear durability and smooth rewinding. 2-sided scale printing. Metric measurements shown on the top side and imperial (inches and feet) on the bottom side of the blade.Ultra-durable design: reinforced metal handle and long-lasting release mechanism. Best-in-class stretch resistance-50% less stretch. Steel blade construction with nylon coating (extra-thick nylon coating) for increased durability. GRIME GUARD: Debris wipers keep the blade clean and free of abrasive materials. Technical Specifications: Class: II Blade width: 9.5 mm Length: 100 m Quantity: 1..