Filter
Your Cart

Consumables for tools - Page 9

Angle grinder accessories for cutting, g..
Wire feeders - consumables and parts for..
Leaf blowers for clean yards, walkways, ..
Rulers for precise measurement, marking,..
Giraffe sanding pad for clean and even s..
Screwdriver bits: bits for installation,..
Drywall screws for securely fastening pa..
Drill bit sharpening for precision work ..
Silicone for sealing, bonding, and grout..
Circular saw blade collets for precise c..
Staples for staplers for precise fasteni..
Rechargeable Batteries - Power and Relia..
Core Drill Bits - Power and Precision fo..
DiscsPrecision and Efficiency for a Vari..
Woodworking Supplies - Precision, Qualit..
Chargers - reliable and fast charging fo..
Lubricating Oils and Greases - Protectio..
Reciprocating Saw Blades - Precise and P..
Chucks - secure grip and maximum precisi..
Nails for construction, repair, and inst..
Drill Bits - Precision and Reliability f..
Construction buckets and tubs - durabili..
Hex keys - precision and reliability for..
Brand: Bosch Stock: In Stock
Bosch 45 mm SDS-max-9 through-hole drill bit, 450/600 mm, for reinforced concrete The SDS-max-9 through-hole drill bit, 45 mm diameter, is designed for use in concrete, masonry, and silicate bricks, e.g., for external cable or pipe connections. The drill bit features three cutting edges, vacuum brazing, and hardening with 3 plates and a triple spiral. Brand: Bosch Part number: 1 618 596 455 / 1618596455 / 1.618.596.455 Outer diameter, mm: 45 mm Length, mm: 450/600 mm Shank diameter of the drill bit/reamer/countersink, mm: 45 mm Type of cutting head: 3 cutting plates Application: for concrete and reinforced concrete Shank type: SDS-max Working length, mm: 450 mm ..
-35%
174.00€ 269.31€
Ex Tax:145.00€
Add to Cart
Brand: Bosch Stock: In Stock
Bosch 2608900526 Adapter and Drill BitDescription: The Bosch PowerChangePlus HEX 11 adapter and drill bit is an innovative solution designed for maximum efficiency when changing drill bits. This adapter is equipped with a unique QUICK CHANGE system that allows for quick and easy attachment and removal of drill bits. This process is completed with a single click, saving time and effort during operation. The adapter can be used with a wide range of core bits with diameters from 14mm to 210 mm, ensuring compatibility with various sizes. It stands out from standard adapters by allowing use with both the largest and smallest core bits. Technical specifications:Brand: BOSCH;Drill bit diameter: 8.5 mm;Total drill length: 105 mm;Adapter diameter: 33.7 mmTotal adapter length: 80 mm;Shank: hexagonal shank;Application: brick, soft floor tiles, cast ironSuitable for: core bits with diameters from 14 mm to 210 mm..
33.49€
Ex Tax:27.91€
Add to Cart
Brand: Bosch Stock: In Stock
Bosch 2608900527 Adapter and Drill BitDescription: The Bosch PowerChangePlus HEX 11 adapter and drill bit is an innovative solution designed for maximum efficiency when changing core bits. This adapter is equipped with a unique QUICK CHANGE system that allows for quick and easy attachment and removal of core bits. This process is completed with a single click, saving time and effort during operation. The adapter can be used with a wide range of core bits with diameters from 14mm to 210 mm, ensuring compatibility with various sizes. It stands out from standard adapters by allowing use with both the largest and smallest core bits. Technical specifications:Brand: BOSCH;Drill bit diameter: 7.15 mm;Total drill length: 105 mm;Adapter diameter: 33.7 mmTotal adapter length: 80 mm;Shank: hexagonal shank;Application: metal pipes, profiles, plastic, wood with metalSuitable for: core bits with diameters from 14 mm to 210 mm..
29.78€
Ex Tax:24.82€
Add to Cart
Brand: Bosch Stock: In Stock
Bosch 2608635528 Reciprocating Saw Blade for Fiber InsulationDescription: The Bosch Precision for FiberInsulation reciprocating saw blade is designed specifically for working with fiber insulation materials, ensuring precise, smooth, and clean cuts. It is made of HCS (high-carbon steel) , which guarantees excellent performance when cutting soft insulation boards and materials. The blade features awavy-ground serrated edge and a ground tip , which allows for easy penetration (plunging) into the material. The blade's wide and exceptionally thick construction prevents bending during use, ensuring stability and maximum precision when cutting at specified angles. Technical specifications:Type: S 1213 AWPOverall length: 300 mmWidth: 22 mmThickness: 1.5 mmTooth spacing: 5 mmTooth pitch (TPI): 5Overall length: 12"Blade material: High Carbon Steel (HCS)Material abbreviation: HCSBody material: HCSMax. cutting capacity: 230 mmShank: 1/2" universalApplications: Fiber insulation (glass and rock wool)Packaging quantity: 2 pcs..
33.77€
Ex Tax:28.14€
Add to Cart
Brand: Bosch Stock: In Stock
Bosch PRO HEX-5 Masonry Drill Bit, Ø10 x 150 mm, 2608706990 Bosch 2608706990 is a drill bit for concrete, stone and brick from the PRO HEX-5 range, 10 mm in diameter with a 100 mm working length and 150 mm overall. The shank is hexagonal. Bosch states up to twice the life of a CYL-3 drill bit. The hex shank This is what separates HEX-5 from ordinary masonry bits. Instead of a cylindrical shank, which spins in place in a three-jaw chuck under resistance, the shank here is hexagonal. The result is a strong connection and full torque transmission. More importantly, it changes where you can work: a hex shank also fits a 1/4" holder on an impact driver. That means drilling concrete with the machine already in your hand, instead of carrying a separate rotary hammer for a handful of holes. The tip The tip has a continuous carbide edge - the cutting plate runs across the whole tip rather than being made of separate segments. That is precisely what lets the bit survive impact mode, in which a segmented edge chips at the corners. The carbide composition is specially chosen for hard materials, and beneath the cutting edge sits a large opening that clears dust effectively. That second point matters more than it sounds: dust left in the hole gets ground over and over, heats the tip, and is the main reason masonry bits go blunt. How to use it The bit is for an impact drill, drill driver or impact driver. In hammer mode press steadily and along the axis - a masonry bit does not cut, it crushes the material, and excessive pressure only heats the tip. On a deep hole, withdraw the bit periodically to let the dust out. The 10 x 150 size Ø10 mm is the size for a 10 mm plug - the most-used fixing for brackets, shelves, radiators and sanitaryware. The 150 mm working length reaches through plaster into the structural substrate, and the 150 mm overall leaves enough for the chuck. Technical specifications ManufacturerBosch Article number2608706990 RangePRO HEX-5 Diameter10 mm Working length100 mm Total length150 mm ShankHexagonal TipContinuous carbide edge MaterialsConcrete, stone, brick For machinesImpact drills, drill drivers, impact drivers LifeUp to 2x a CYL-3 bit Questions and Answers Why a hex shank? For a strong connection and full torque transmission. A cylindrical shank spins in place in the chuck under resistance. A hex shank also fits a 1/4" holder on an impact driver. Can I drill with an impact driver? Yes - that is HEX-5's main point. The continuous carbide edge is built to withstand impact loading, where a segmented tip chips away. Does it fit a rotary hammer? Not directly - the shank is hexagonal, not SDS-plus. The bit is intended for impact drills and drivers; a rotary hammer needs SDS-shank bits. Which wall plug is Ø10 for? A 10 mm plug - the most-used size for brackets, shelves, radiators and sanitaryware. Why does the opening under the edge matter? Because it clears the dust. Dust left in the hole is ground over and over and heats the tip - the main reason masonry bits lose their edge. How deep a hole does it make? Working length is 150 mm out of 150 mm overall - enough to go through plaster into the structural substrate, with the remainder held in the chuck. How hard should I press? Steadily and along the axis. A masonry bit crushes rather than cuts - too much pressure only heats the tip. On a deep hole, withdraw the bit periodically to clear dust. ..
9.68€
Ex Tax:8.07€
Add to Cart
Brand: Bosch Stock: In Stock
Bosch PRO HEX-5 Masonry Drill Bit, Ø10 x 200 mm, 2608706991 Bosch 2608706991 is a drill bit for concrete, stone and brick from the PRO HEX-5 range, 10 mm in diameter with a 150 mm working length and 200 mm overall. The shank is hexagonal. Bosch states up to twice the life of a CYL-3 drill bit. The hex shank This is what separates HEX-5 from ordinary masonry bits. Instead of a cylindrical shank, which spins in place in a three-jaw chuck under resistance, the shank here is hexagonal. The result is a strong connection and full torque transmission. More importantly, it changes where you can work: a hex shank also fits a 1/4" holder on an impact driver. That means drilling concrete with the machine already in your hand, instead of carrying a separate rotary hammer for a handful of holes. The tip The tip has a continuous carbide edge - the cutting plate runs across the whole tip rather than being made of separate segments. That is precisely what lets the bit survive impact mode, in which a segmented edge chips at the corners. The carbide composition is specially chosen for hard materials, and beneath the cutting edge sits a large opening that clears dust effectively. That second point matters more than it sounds: dust left in the hole gets ground over and over, heats the tip, and is the main reason masonry bits go blunt. How to use it The bit is for an impact drill, drill driver or impact driver. In hammer mode press steadily and along the axis - a masonry bit does not cut, it crushes the material, and excessive pressure only heats the tip. On a deep hole, withdraw the bit periodically to let the dust out. The 10 x 200 size Ø10 mm is the size for a 10 mm wall plug - the most-used fixing for brackets, shelves, radiators and sanitaryware. The 150 mm working length reaches through plaster into the structural substrate, and the 200 mm overall leaves enough for the chuck. Technical specifications ManufacturerBosch Article number2608706991 RangePRO HEX-5 Diameter10 mm Working length150 mm Total length200 mm ShankHexagonal TipContinuous carbide edge MaterialsConcrete, stone, brick For machinesImpact drills, drill drivers, impact drivers LifeUp to 2x a CYL-3 bit Questions and Answers Why a hex shank? For a strong connection and full torque transmission. A cylindrical shank spins in place in the chuck under resistance. A hex shank also fits a 1/4" holder on an impact driver. Can I drill with an impact driver? Yes - that is HEX-5's main point. The continuous carbide edge is built to withstand impact loading, where a segmented tip chips away. Does it fit a rotary hammer? Not directly - the shank is hexagonal, not SDS-plus. The bit is intended for impact drills and drivers; a rotary hammer needs SDS-shank bits. Which wall plug is Ø10 for? A 10 mm plug - the most-used size for brackets, shelves, radiators and sanitaryware. Why does the opening under the edge matter? Because it clears the dust. Dust left in the hole is ground over and over and heats the tip - the main reason masonry bits lose their edge. How deep a hole does it make? Working length is 150 mm out of 200 mm overall - enough to go through plaster into the structural substrate, with the remainder held in the chuck. How hard should I press? Steadily and along the axis. A masonry bit crushes rather than cuts - too much pressure only heats the tip. On a deep hole, withdraw the bit periodically to clear dust. ..
11.92€
Ex Tax:9.93€
Add to Cart
Brand: Bosch Stock: In Stock
Bosch PRO HEX-5 Masonry Drill Bit, Ø5 x 100 mm, 2608706972 Bosch 2608706972 is a drill bit for concrete, stone and brick from the PRO HEX-5 range, 5 mm in diameter with a 50 mm working length and 100 mm overall. The shank is hexagonal. Bosch states up to twice the life of a CYL-3 drill bit. The hex shank This is what separates HEX-5 from ordinary masonry bits. Instead of a cylindrical shank, which spins in place in a three-jaw chuck under resistance, the shank here is hexagonal. The result is a strong connection and full torque transmission. More importantly, it changes where you can work: a hex shank also fits a 1/4" holder on an impact driver. That means drilling concrete with the machine already in your hand, instead of carrying a separate rotary hammer for a handful of holes. The tip The tip has a continuous carbide edge - the cutting plate runs across the whole tip rather than being made of separate segments. That is precisely what lets the bit survive impact mode, in which a segmented edge chips at the corners. The carbide composition is specially chosen for hard materials, and beneath the cutting edge sits a large opening that clears dust effectively. That second point matters more than it sounds: dust left in the hole gets ground over and over, heats the tip, and is the main reason masonry bits go blunt. How to use it The bit is for an impact drill, drill driver or impact driver. In hammer mode press steadily and along the axis - a masonry bit does not cut, it crushes the material, and excessive pressure only heats the tip. On a deep hole, withdraw the bit periodically to let the dust out. The 5 x 100 size Ø10 mm is the size for a 10 mm wall plug - the most-used fixing for brackets, shelves, radiators and sanitaryware. The 150 mm working length reaches through plaster into the structural substrate, and the 100 mm overall leaves enough for the chuck. Technical specifications ManufacturerBosch Article number2608706972 RangePRO HEX-5 Diameter5 mm Working length50 mm Total length100 mm ShankHexagonal TipContinuous carbide edge MaterialsConcrete, stone, brick For machinesImpact drills, drill drivers, impact drivers LifeUp to 2x a CYL-3 bit Questions and Answers Why a hex shank? For a strong connection and full torque transmission. A cylindrical shank spins in place in the chuck under resistance. A hex shank also fits a 1/4" holder on an impact driver. Can I drill with an impact driver? Yes - that is HEX-5's main point. The continuous carbide edge is built to withstand impact loading, where a segmented tip chips away. Does it fit a rotary hammer? Not directly - the shank is hexagonal, not SDS-plus. The bit is intended for impact drills and drivers; a rotary hammer needs SDS-shank bits. Which wall plug is Ø5 for? A 10 mm plug - the most-used size for brackets, shelves, radiators and sanitaryware. Why does the opening under the edge matter? Because it clears the dust. Dust left in the hole is ground over and over and heats the tip - the main reason masonry bits lose their edge. How deep a hole does it make? Working length is 150 mm out of 100 mm overall - enough to go through plaster into the structural substrate, with the remainder held in the chuck. How hard should I press? Steadily and along the axis. A masonry bit crushes rather than cuts - too much pressure only heats the tip. On a deep hole, withdraw the bit periodically to clear dust. ..
5.20€
Ex Tax:4.33€
Add to Cart
Brand: Bosch Stock: In Stock
Bosch PRO HEX-5 Masonry Drill Bit, Ø6 x 150 mm, 2608706977 Bosch 2608706977 is a drill bit for concrete, stone and brick from the PRO HEX-5 range, 6 mm in diameter with a 100 mm working length and 150 mm overall. The shank is hexagonal. Bosch states up to twice the life of a CYL-3 drill bit. The hex shank This is what separates HEX-5 from ordinary masonry bits. Instead of a cylindrical shank, which spins in place in a three-jaw chuck under resistance, the shank here is hexagonal. The result is a strong connection and full torque transmission. More importantly, it changes where you can work: a hex shank also fits a 1/4" holder on an impact driver. That means drilling concrete with the machine already in your hand, instead of carrying a separate rotary hammer for a handful of holes. The tip The tip has a continuous carbide edge - the cutting plate runs across the whole tip rather than being made of separate segments. That is precisely what lets the bit survive impact mode, in which a segmented edge chips at the corners. The carbide composition is specially chosen for hard materials, and beneath the cutting edge sits a large opening that clears dust effectively. That second point matters more than it sounds: dust left in the hole gets ground over and over, heats the tip, and is the main reason masonry bits go blunt. How to use it The bit is for an impact drill, drill driver or impact driver. In hammer mode press steadily and along the axis - a masonry bit does not cut, it crushes the material, and excessive pressure only heats the tip. On a deep hole, withdraw the bit periodically to let the dust out. The 6 x 150 size Ø6 mm is the size for a 6 mm plug - the most-used fixing for brackets, shelves, radiators and sanitaryware. The 150 mm working length reaches through plaster into the structural substrate, and the 150 mm overall leaves enough for the chuck. Technical specifications ManufacturerBosch Article number2608706977 RangePRO HEX-5 Diameter6 mm Working length100 mm Total length150 mm ShankHexagonal TipContinuous carbide edge MaterialsConcrete, stone, brick For machinesImpact drills, drill drivers, impact drivers LifeUp to 2x a CYL-3 bit Questions and Answers Why a hex shank? For a strong connection and full torque transmission. A cylindrical shank spins in place in the chuck under resistance. A hex shank also fits a 1/4" holder on an impact driver. Can I drill with an impact driver? Yes - that is HEX-5's main point. The continuous carbide edge is built to withstand impact loading, where a segmented tip chips away. Does it fit a rotary hammer? Not directly - the shank is hexagonal, not SDS-plus. The bit is intended for impact drills and drivers; a rotary hammer needs SDS-shank bits. Which wall plug is Ø6 for? A 10 mm plug - the most-used size for brackets, shelves, radiators and sanitaryware. Why does the opening under the edge matter? Because it clears the dust. Dust left in the hole is ground over and over and heats the tip - the main reason masonry bits lose their edge. How deep a hole does it make? Working length is 150 mm out of 150 mm overall - enough to go through plaster into the structural substrate, with the remainder held in the chuck. How hard should I press? Steadily and along the axis. A masonry bit crushes rather than cuts - too much pressure only heats the tip. On a deep hole, withdraw the bit periodically to clear dust. ..
7.22€
Ex Tax:6.02€
Add to Cart
Brand: Bosch Stock: In Stock
Bosch PRO HEX-5 Masonry Drill Bit, Ø8 x 150 mm, 2608706985 Bosch 2608706985 is a drill bit for concrete, stone and brick from the PRO HEX-5 range, 8 mm in diameter with a 100 mm working length and 150 mm overall. The shank is hexagonal. Bosch states up to twice the life of a CYL-3 drill bit. The hex shank This is what separates HEX-5 from ordinary masonry bits. Instead of a cylindrical shank, which spins in place in a three-jaw chuck under resistance, the shank here is hexagonal. The result is a strong connection and full torque transmission. More importantly, it changes where you can work: a hex shank also fits a 1/4" holder on an impact driver. That means drilling concrete with the machine already in your hand, instead of carrying a separate rotary hammer for a handful of holes. The tip The tip has a continuous carbide edge - the cutting plate runs across the whole tip rather than being made of separate segments. That is precisely what lets the bit survive impact mode, in which a segmented edge chips at the corners. The carbide composition is specially chosen for hard materials, and beneath the cutting edge sits a large opening that clears dust effectively. That second point matters more than it sounds: dust left in the hole gets ground over and over, heats the tip, and is the main reason masonry bits go blunt. How to use it The bit is for an impact drill, drill driver or impact driver. In hammer mode press steadily and along the axis - a masonry bit does not cut, it crushes the material, and excessive pressure only heats the tip. On a deep hole, withdraw the bit periodically to let the dust out. The 8 x 150 size Ø8 mm is the size for a 8 mm plug - the most-used fixing for brackets, shelves, radiators and sanitaryware. The 150 mm working length reaches through plaster into the structural substrate, and the 150 mm overall leaves enough for the chuck. Technical specifications ManufacturerBosch Article number2608706985 RangePRO HEX-5 Diameter8 mm Working length100 mm Total length150 mm ShankHexagonal TipContinuous carbide edge MaterialsConcrete, stone, brick For machinesImpact drills, drill drivers, impact drivers LifeUp to 2x a CYL-3 bit Questions and Answers Why a hex shank? For a strong connection and full torque transmission. A cylindrical shank spins in place in the chuck under resistance. A hex shank also fits a 1/4" holder on an impact driver. Can I drill with an impact driver? Yes - that is HEX-5's main point. The continuous carbide edge is built to withstand impact loading, where a segmented tip chips away. Does it fit a rotary hammer? Not directly - the shank is hexagonal, not SDS-plus. The bit is intended for impact drills and drivers; a rotary hammer needs SDS-shank bits. Which wall plug is Ø8 for? A 10 mm plug - the most-used size for brackets, shelves, radiators and sanitaryware. Why does the opening under the edge matter? Because it clears the dust. Dust left in the hole is ground over and over and heats the tip - the main reason masonry bits lose their edge. How deep a hole does it make? Working length is 150 mm out of 150 mm overall - enough to go through plaster into the structural substrate, with the remainder held in the chuck. How hard should I press? Steadily and along the axis. A masonry bit crushes rather than cuts - too much pressure only heats the tip. On a deep hole, withdraw the bit periodically to clear dust. ..
7.70€
Ex Tax:6.42€
Add to Cart
Brand: Bosch Stock: In Stock
Bosch PRO HEX-5 Masonry Drill Bit, Ø8 x 200 mm, 2608706986 Bosch 2608706986 is a drill bit for concrete, stone and brick from the PRO HEX-5 range, 8 mm in diameter with a 150 mm working length and 200 mm overall. The shank is hexagonal. Bosch states up to twice the life of a CYL-3 drill bit. The hex shank This is what separates HEX-5 from ordinary masonry bits. Instead of a cylindrical shank, which spins in place in a three-jaw chuck under resistance, the shank here is hexagonal. The result is a strong connection and full torque transmission. More importantly, it changes where you can work: a hex shank also fits a 1/4" holder on an impact driver. That means drilling concrete with the machine already in your hand, instead of carrying a separate rotary hammer for a handful of holes. The tip The tip has a continuous carbide edge - the cutting plate runs across the whole tip rather than being made of separate segments. That is precisely what lets the bit survive impact mode, in which a segmented edge chips at the corners. The carbide composition is specially chosen for hard materials, and beneath the cutting edge sits a large opening that clears dust effectively. That second point matters more than it sounds: dust left in the hole gets ground over and over, heats the tip, and is the main reason masonry bits go blunt. How to use it The bit is for an impact drill, drill driver or impact driver. In hammer mode press steadily and along the axis - a masonry bit does not cut, it crushes the material, and excessive pressure only heats the tip. On a deep hole, withdraw the bit periodically to let the dust out. The 8 x 200 size Ø8 mm is the size for a 8 mm plug - the most-used fixing for brackets, shelves, radiators and sanitaryware. The 150 mm working length sets the maximum hole depth, and the 200 mm overall includes the section held in the chuck. Technical specifications ManufacturerBosch Article number2608706986 RangePRO HEX-5 Diameter8 mm Working length150 mm Total length200 mm ShankHexagonal TipContinuous carbide edge MaterialsConcrete, stone, brick For machinesImpact drills, drill drivers, impact drivers LifeUp to 2x a CYL-3 bit Questions and Answers Why a hex shank? For a strong connection and full torque transmission. A cylindrical shank spins in place in the chuck under resistance. A hex shank also fits a 1/4" holder on an impact driver. Can I drill with an impact driver? Yes - that is HEX-5's main point. The continuous carbide edge is built to withstand impact loading, where a segmented tip chips away. Does it fit a rotary hammer? Not directly - the shank is hexagonal, not SDS-plus. The bit is intended for impact drills and drivers; a rotary hammer needs SDS-shank bits. Which wall plug is Ø8 for? A 10 mm plug - the most-used size for brackets, shelves, radiators and sanitaryware. Why does the opening under the edge matter? Because it clears the dust. Dust left in the hole is ground over and over and heats the tip - the main reason masonry bits lose their edge. How deep a hole does it make? Working length is 150 mm out of 200 mm overall - the remainder is held in the chuck. How hard should I press? Steadily and along the axis. A masonry bit crushes rather than cuts - too much pressure only heats the tip. On a deep hole, withdraw the bit periodically to clear dust. ..
9.48€
Ex Tax:7.90€
Add to Cart
Brand: Bosch Stock: In Stock
Bosch PRO Laminate Set Jigsaw Blades, T-Shank, 3 Pieces, 2608636429 Bosch 2608636429 is a set of 3 jigsaw blades for laminate, with a T-shank. It contains T101BIF for straight cuts and T101AOF for curves. Why laminate is difficult Laminate flooring and faced board are a hard surface over a soft core. That creates a specific problem: an ordinary wood blade chips the facing where the tooth exits - that is, on the visible face if you cut from above. The answer in the BIF and AOF blades is reverse tooth geometry. The teeth point downward instead of upward, so the cutting stroke presses the laminate onto the bench rather than lifting it. The result is a clean edge on the face side - the side you see. The two blades in the set T101BIF - for straight cuts. The wider body holds the line and does not wander on a long cut. This is the blade for shortening a board or cutting along a straight line. T101AOF - for curves. The narrower back allows a tighter radius without the blade twisting. This is the blade for cutting round a pipe, for a socket opening or for a scribed angle. Together in one set they cover both tasks that come up in the same laminate installation. Practical tips Reverse-tooth blades have one quirk worth knowing: switch the pendulum action off. Orbital action adds a forward-and-back movement which, with a reverse tooth, works against the purpose and starts tearing the edge. The blade also pushes the machine upward - keep it pressed down onto the material. If you do cut with the laminate face down, reverse blades lose their point - an ordinary clean-cut blade does the same job in that position. Compatibility The shank is T-shank - the universal standard. The blades fit all T-shank jigsaws, whatever the brand of machine. When the set pays for itself A jigsaw is in practice the machine laminate gets cut with during installation, for several reasons. A circular saw gives a straighter cut but is heavy and does not come into a room stacked with laid boards. A hand saw is slow. A jigsaw cuts in place, against the row already down, and it makes the cut-outs every floor demands: around radiator pipes, thresholds, door casings and non-square corners. That is exactly why a set with two blades - straight and curve - is the practical answer. Those two tasks do not come separately: over a day's installation you swap blades several times, and with only one blade type either the cut comes out ragged or the curve comes out crooked. Technical specifications ManufacturerBosch Article number2608636429 RangePRO Laminate Set Pack quantity3 pieces Blade typesT101BIF (straight cuts), T101AOF (curves) Tooth geometryReverse tooth Material to cutLaminate and faced board ShankT-shank Questions and Answers Which blades are in the set? Three blades: T101BIF for straight cuts and T101AOF for curves. The two types cover the tasks that arise in the same laminate installation. Why do the teeth point downward? That is reverse tooth geometry. The cutting stroke presses the laminate onto the bench instead of lifting it, so the face side stays clean and the facing does not chip. Should I use the pendulum action? No - switch it off. With a reverse tooth, orbital action works against the purpose and starts tearing the edge. Also keep the machine pressed down, since the blade pushes it up. Which blade for curves? T101AOF - the narrower back allows a tight radius without the blade twisting. For cutting round a pipe, a socket opening or a scribed angle. What if I cut face down? Then reverse blades lose their advantage - in that position an ordinary clean-cut blade does the same job. Reverse teeth are for cutting face up. Do they fit any machine? The shank is T-shank - the universal standard. The blades fit any jigsaw with that fitting, whatever the brand. Will they cut plain timber? Yes, but with no advantage. Solid timber has no hard facing to chip, and the reverse tooth pushes the machine up for no return - an ordinary blade is more comfortable there. ..
13.00€
Ex Tax:10.83€
Add to Cart
Brand: Bosch Stock: In Stock
Bosch PRO Metal Clean Cup Brush, 75 mm, M10 A cup brush for angle grinders, 75 mm in diameter with 0.30 mm crimped brass-coated wire. It screws straight onto an M10 spindle. Maximum speed is 12,500 min-1. Crimped, not knotted wire Crimped wire is softer than knotted - it works more gently on the substrate and suits cleaning rather than heavy removal. The brass coating reduces sparking and helps on softer metals. Which machine The brush is for angle grinders of 100 mm minimum diameter with an M10 spindle thread. Important: most angle grinders have an M14 thread - check your machine's spindle before ordering. Safety The product carries EN 1083-2 marking. Do not exceed the maximum 12,500 min-1 - a brush run above its rated speed sheds wires. What is in the delivery 1 x Bosch 2 608 622 062 cup brush No adapters or spanners - the brush screws directly onto the spindle. Technical specifications Article number2 608 622 062 EAN3165140102704 RangePRO Metal Clean Diameter75 mm Wire diameter0.30 mm Wire typecrimped, brass coated ThreadM10 Max. speed12,500 min-1 For grinders from100 mm StandardEN 1083-2 Pack quantity1 pc OriginChina Questions and Answers What is the thread? M10. NOTE: most angle grinders use an M14 thread - check your machine's spindle before ordering. A brush with the wrong thread will not fit. What wire is it? 0.30 mm crimped wire with a brass coating. A description of "steel wire" is not accurate - the coating is brass, visible in the golden colour. What is the difference between crimped and knotted wire? Crimped is softer and works more gently - for cleaning rust, scale and old coatings. Knotted is aggressive and removes material. What is the maximum speed? 12,500 rpm. Do not exceed it - a brush run above its rated speed begins to shed wires. Which machine is it for? Angle grinders of 100 mm minimum diameter with an M10 spindle. Is an adapter needed? No. The brush screws directly onto the spindle - no adapters or spanners are supplied or needed. Is there a standard? Yes, EN 1083-2 - the European standard for wire brushes, marked on the product itself. ..
18.37€
Ex Tax:15.31€
Add to Cart
Brand: Bosch Stock: In Stock
Bosch PRO Metal HSS-G Twist Drill Bit Set for Metal, DIN 338, Ø 1-10 mm, 19 pcs Bosch PRO Metal HSS-G (order number 2 608 587 013) is a set of 19 twist drill bits for metal covering 1.0 to 10.0 mm in 0.5 mm steps. The bits are made of ground high-speed steel to DIN 338, with a 135° point angle and a split point. The set comes in a plastic ProBox cassette measuring 172 x 115 x 42 mm with marked slots. A set for everyday metalwork: the whole ladder from 1 to 10 mm in one box. What it is for Bosch describes the bits as a choice for construction workers and installers. The materials the manufacturer lists are alloyed and unalloyed steel, non-ferrous metals, cast iron, plastics and wood - in practice almost everything drilled on site and in the workshop: sheet metal and profiles, angle iron, tubes, aluminium and brass parts, cast iron, PVC. The bits run in an ordinary drill or a cordless driver with a three-jaw chuck, with hammer action switched off. Hammer action is for concrete and masonry and chips the cutting edge of a metal bit. What the "G" in HSS-G means HSS stands for high-speed steel. The letter G (from the German geschliffen - ground) tells you how the flute was made: on HSS-G bits the flute and the cutting edges are ground out of solid stock, while on cheaper HSS-R bits the flute is rolled. A ground bit has more accurate point geometry and better concentricity - it runs rounder, bites cleaner and produces a hole closer to nominal size. Bosch puts it briefly: "Ground high-speed steel for strength and durability". The manufacturer also compares it within its own range: this article lasts up to 2x longer than a Bosch PointTeQ drill bit (the rolled HSS-R line of Bosch). That is Bosch's own comparison and refers to the life of the cutting edge, not to drilling speed. 135° split point The tip is a split point ground at 135°. The chisel edge in the centre is split, which does two things: the bit centres itself instead of wandering across the surface, and it needs less feed pressure to start cutting. Bosch describes it as a "split-point tip for starting holes exactly where you need them", with "no need for pilot holes". The difference shows on sloped or smooth surfaces - painted sheet metal, a tube, a finished part. An ordinary bit with a 118° point and a solid chisel edge walks off unless centre-punched first; with a 135° split point the punch mark is usually unnecessary. Shank and chuck The shank is cylindrical and its diameter equals the drill bit diameter - it is not reduced. That brings one practical limit: the 10 mm bit needs a chuck that opens to at least 10 mm. A 1.5-13 mm chuck takes it, 0.8-10 mm is right at the limit, and in a small 1-6.5 mm chuck the upper diameters will not fit. Because the shank is a plain cylinder, the bits work in a three-jaw chuck of any brand of machine - which is exactly why Bosch prints the Universal brand fit mark on the packaging. The diameters in the set The set holds 19 bits, one of each diameter, in 0.5 mm steps across the whole range. Below are the diameters with working and total lengths as published by Bosch: DiameterWorking lengthTotal length 1.0 mm12 mm34 mm 1.5 mm18 mm40 mm 2.0 mm24 mm49 mm 2.5 mm30 mm57 mm 3.0 mm33 mm61 mm 3.5 mm39 mm70 mm 4.0 mm43 mm75 mm 4.5 mm47 mm80 mm 5.0 mm52 mm86 mm 5.5 mm57 mm93 mm 6.0 mm57 mm93 mm 6.5 mm63 mm101 mm 7.0 mm69 mm109 mm 7.5 mm69 mm109 mm 8.0 mm75 mm117 mm 8.5 mm75 mm117 mm 9.0 mm81 mm125 mm 9.5 mm81 mm125 mm 10.0 mm87 mm133 mm The working length is the fluted part and sets the maximum material thickness for one pass: 87 mm with the 10 mm bit, 33 mm with the 3 mm one. The standard tapping drill sizes for metric coarse threads are 2.5 mm for M3, 3.3 for M4, 4.2 for M5, 5.0 for M6, 6.8 for M8 and 8.5 for M10. This set contains 2.5, 5.0 and 8.5 mm, so M3, M6 and M10 are covered; 3.3, 4.2 and 6.8 mm are missing because the step here is 0.5 mm. Technical specifications BrandBosch Professional LinePRO Metal HSS-G Order number2 608 587 013 EAN3165140689779 Typetwist drill bit set for metal Number of bits19 (one of each diameter) Diameters1.0 - 10.0 mm in 0.5 mm steps Materialground high-speed steel (HSS-G) StandardDIN 338 Point angle135° Tip grindsplit point, self-centring Shankcylindrical, diameter equal to the drill bit diameter Holderthree-jaw drill chuck Lengthsworking 12 - 87 mm, total 34 - 133 mm Drills inalloyed and unalloyed steel, non-ferrous metals, cast iron, plastics, wood Packagingplastic ProBox cassette, with Euro hole Cassette dimensions172 x 115 x 42 mm Weight with packagingapprox. 0.53 kg Operating moderotary drilling only - no hammer action What is in the set 19 Bosch PRO Metal HSS-G twist drill bits for metal, one of each diameter: 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 6.5, 7.0, 7.5, 8.0, 8.5, 9.0, 9.5 and 10.0 mm Plastic ProBox cassette 172 x 115 x 42 mm with marked ..
-19%
29.00€ 35.94€
Ex Tax:24.17€
Add to Cart
Brand: Bosch Stock: In Stock
Bosch Professional T118G Jigsaw Blade for Metal 2608631674 Manufacturer: Bosch Professional Model: T118G-2608631674 Description: Tooth design: Wave-shaped set, milled Tooth length: 67 mm Applications: Very thin sheet metal (0.5-1.5 mm) Technical specifications: Manufacturer: Bosch Part number: 2608631674 Product dimensions: 45.01 x 40.01 x 24.99 cm; 18.14 g Item model number: 2608631674 Color: Silver Package quantity: 1 Number of pieces: 1 Application: Metal cutting Included components: 3 jigsaw blades Item weight: 18.1 g The set includes: 3 jigsaw blades..
-6%
4.40€ 4.70€
Ex Tax:3.67€
Add to Cart
Brand: Bosch Stock: In Stock
Bosch Rapido Multi Construction ACS 46 V BF Straight Cutting Disc, 230 mm, 1.9 mm / 2608602767 Manufacturer: Bosch Model: 2 608 602 767 / 2608602767 Description and technical specifications: Product line: PRO Consumables Specification: ACS 46 V BF, 230 mm, 1.9 mm Product text, consumables gray: Straight Cuts almost anything without changing the blade Cutting blade for metal, stainless steel, non-ferrous metals, stone, soft ceramic tiles, marble, and plastics Packaging type: Unpackaged product, without Euro hole Commercial packaging unit: 1 pc. Details Specification: ACS 46 V BF Diameter, mm: 230 Bore diameter, mm: 22.23 Thickness, mm: 1.9 Suitable for workable materials (details): Stainless steel/Inox Steel/ferrous metal Aluminum Polyvinyl chloride (PVC) Granite Marble..
-40%
3.14€ 5.21€
Ex Tax:2.62€
Add to Cart
Brand: Bosch Stock: In Stock
BOSCH 0601092600 Laser Level StandDescription: The BOSCH RM 1 laser level stand is a high-quality and convenient tool for mounting a laser level, ensuring that the laser lines are aligned for greater accuracy. It is compatible with the Bosch GLL 2-10 and GCL 2-15 models. Technical specifications:Compatible with: GLL 2-10 and GCL 2-15..
35.99€
Ex Tax:29.99€
Add to Cart
Brand: Bosch Stock: In Stock
BOSCH 0601092700 Laser Level StandDescription: The BOSCH RM 2 laser level stand is a high-quality and convenient tool for mounting a laser level, ensuring that the laser lines are aligned for greater accuracy. It is compatible with the Bosch GLL 2-10 and GCL 2-15 models. Technical specifications:Compatible with: GLL 2-10 and GCL 2-15..
49.20€
Ex Tax:41.00€
Add to Cart
Brand: Bosch Stock: In Stock
Bosch S 644 D Reciprocating Saw Blade for WoodDescription: The Bosch 2608650614 wood reciprocating saw blade is specially designed to allow you to make clean, curved, and deep cuts in wood. The sharp, ground teeth ensure chip-free cutting, delivering smooth and precise results. The blade's tapered tip is convenient for working in hard-to-reach areas, allowing for curved cuts and easy penetration into the material. This knife is made from high-quality HCS (high-carbon steel), making it suitable for cutting wood and non-abrasive wood-based materials in construction. Technical specifications:Length: 150 mmWidth: 19 mmThickness: 1.25 mmTooth pitch: 6TPITooth spacing: 4 mmMaterial: High Carbon Steel, HCSMax. cutting capacity: 100 mmMax. cutting capacity in panels: 6-60 mmApplications: Structural lumber (..
-22%
6.14€ 7.85€
Ex Tax:5.12€
Add to Cart
Brand: Bosch Stock: In Stock
BOSCH 2608605112 Sanding Pad, C430 125 mm/60-120-240, 8-hole, 6-pack The BOSCH 2608605112 set consists of 6 sanding discs for a sander and offers an exceptionally long service life when sanding wood, veneer, and solid surfaces. The abrasive grains are evenly distributed with an electrostatic open-coating for consistent dust removal while preventing clogging. The hard abrasive grit is wear-resistant, allowing for prolonged and repeated use. The C430 Expert for Wood and Paint sanding sheet is suitable for sanding veneer, wood, hard surfaces, and more. Technical specifications:Brand: BOSCH;Diameter: 125 mm;Grit size: 60 / 120 / 240;Number of holes: 8 holes;Application: for wood and paint;Quantity per package: 6 pieces;Dimensions (LxWxH): 155 x 137 x 8 mm; Weight: 0.050 kg...
5.15€
Ex Tax:4.29€
Add to Cart
Brand: Bosch Stock: In Stock
BOSCH 2608605122 Sanding Disc, F355 125 mm/600 grit, 8 holes, 5 pieces The BOSCH 2608605122 Best for Coatings and Composites set consists of 5 sanding discs for a sander. It has an exceptionally long service life and delivers excellent results on both abrasive and composite surfaces. The antistatic, closed-grain coating creates uniform surfaces. They feature an antistatic, closed-grain coating to minimize dust adhesion to the work surface or the machine. The sanding sheets are made of synthetic resin for wear resistance in heavy-duty applications. The base material of this product is F-paper for optimal sanding. The F355 Best for Coatings and Composites sanding sheet is compatible with all orbital sanders. Technical specifications:Brand: BOSCH;Diameter: 125 mm;Grit size: 600;Number of holes: 8 holes;Application: Granite, Glass, Marble, Glass-fiber-reinforced plastic (GFK), Acrylic glass (Plexiglas);Application: Random orbit sander;Quantity per package: 5 pieces;Dimensions (LxWxH): 155 x 137 x 8 mm; Weight: 0.040 kg...
6.44€
Ex Tax:5.37€
Add to Cart
Showing 161 to 180 of 3318 (166 Pages)
Product Filter