Consumables for tools - Page 8

Bosch Flexible for Metal Reciprocating Saw Blade / 2608656041 Manufacturer: Bosch Model: 2 608 656 041 / 2608656041 Description and technical specifications: Product line: PRO Consumables Specification: Flexible for Metal Product text, consumables gray: S 1122 BF BIM, with flange, milled Thick sheet metal (3-8 mm), solid pipes/profiles (ø ..

Bosch Flexible Reciprocating Saw Blade for Wood and Metal / 2608656043 Manufacturer: Bosch Model: 2 608 656 043 / 2608656043 Description and technical specifications: Product line: PRO Consumables Specification: Flexible for Wood and Metal Product text, consumables gray: S 1222 VF BIM, variable tooth pitch Wood with nails/metal (..

This fast charger for all lithium-ion batteries ranging from 14.4 to 18V features active air cooling to ensure a long battery life. Technical specifications:Battery charging voltage: 14.4-18 VCharging current: 8.0 ACharging time for a battery capacity of 1.5 Ah (80%/100%) approx. 10/25 minCharging time for a battery capacity of 2.0 Ah (80%/100%) approx. 15/30 minCharging time for a 3.0 Ah battery (80%/100%) approx. 20/35 minCharging time for a 4.0 Ah battery (80%/100%) approx. 25/35 minCharging time with a battery capacity of 5.0 Ah (80%/100%) approx. 35/45 minCharging time with a battery capacity of 6.0 Ah (80%/100%) approx. 35/55 minCharging duration with a battery capacity of 6.3 Ah (80%/100%) approx. 41/55 minCharging time for ProCORE18V 4.0Ah (80%/100%) approx. 32/51 minCharging time ProCORE18V 8.0Ah (80%/100%) approx. 68/79 minCharging time ProCORE18V 12.0Ah (80%/100%) approx. 113/126 minWeight 700 g..

Bosch Sanding Pad 2608901678Description: The Bosch 2608901678 sanding pad is designed for manual sanding of flat surfaces and edges, lasting up to 5 times longer than standard Bosch C420 sanding paper thanks to Bosch Surface Structure technology. This technology ensures a strong and flexible bond between the abrasive grains and the backing, prevents grain loss when working on edges, and minimizes clogging. The pad is suitable for sanding wood and paint, including removing old paint from window frames. It features square edges for working on flat surfaces, 90-degree edges, and a rounded edge for hard-to-reach areas. It is easy to clean by shaking out or washing with water. Technical specifications:Suitable for: wood and paintSize: 96 x 69 x 26 mmGrit: 120Quantity: 1 pc ..

Bosch Hacksaw Blades 1600A03A7Z, 300 mm, 3 pcs, 32 TPI The Bosch 1600A03A7Z is a pack of 3 hand hacksaw blades, 300 mm long with 32 teeth per inch. The blades are bi-metal - an HSS tooth welded to an HCS body - with a hardness of HRC 62-68. The blade tension stated by the manufacturer is 1150 N. Bi-metal: hard tooth, flexible body The bi-metal blade settles the old compromise in hacksaw blades. The tooth is high-speed HSS steel, which takes the heat and the wear of cutting steel; the body is the tougher carbon HCS steel, which bends instead of breaking. The two are joined by a weld along the whole length. The result is a blade that does not crack when it is slightly twisted in the cut - the commonest reason a one-piece blade fails long before its teeth are blunt. The 32 TPI pitch 32 teeth per inch is the fine pitch: for thin-walled tube, sheet, section and any thin material where a coarser tooth would snag and strip. The rule is that at least three teeth should be in contact with the material at all times. Which saw they fit Three hundred millimetres is the standard hand hacksaw length - the size that fits any common frame and gives a full cutting stroke. The blades mount in a standard hacksaw frame through the holes at each end and are tensioned with the frame's wing nut. Tension matters: a slack blade twists in the cut and breaks long before it goes blunt. Applications Cutting steel and copper pipe, sections, sheet, threaded rod, bolts, aluminium and plastic - hand cutting in installation, assembly and repair work. A pack of three is about what one site job consumes. Technical specifications Part number1600A03A7Z EAN4059952737485 Length300 mm Number of teeth32 TPI MaterialBi-Metal, HSS + HCS HardnessHRC 62-68 Blade tension1150 N Packaging typepaper / cardboard / corrugated board, packaging with Euro hole Pack quantity3 pcs ManufacturerBosch Professional Questions and Answers How many blades are in the pack? Three. Bosch states a pack quantity of 3 pcs for part number 1600A03A7Z. What does bi-metal mean? The tooth is high-speed HSS steel and the body is carbon HCS steel, the two joined by a weld. The tooth takes the wear while the body bends instead of cracking in the cut. What material is 32 TPI for? At 32 teeth per inch the blade is for thin-walled tube, sheet and thin sections. The rule is that at least three teeth should be in contact with the material at all times. Do they fit any hacksaw? The blades are 300 mm long with a hole at each end - the standard form for hand hacksaw frames of that size. Check the pin spacing quoted for your frame before ordering. What is the hardness? Bosch states HRC 62-68 for these blades. That is the usual range for bi-metal hacksaw blades - hard enough to cut steel without the teeth going blunt quickly. Why does a blade break before it goes blunt? Almost always because it was not tensioned enough in the frame, or because it was twisted in the cut. A slack blade flexes and cracks. Bi-metal construction reduces the risk but does not remove the need for proper tension. Is there another size in the range? Yes. The range includes 150 mm blades at 24 TPI (1600A03AC9) and 300 mm blades at 32 TPI (1600A03A7Z), both in packs of three and both bi-metal. ..

Bosch Hacksaw Blades 1600A03AC9, 150 mm, 3 pcs, 24 TPI The Bosch 1600A03AC9 is a pack of 3 hand hacksaw blades, 150 mm long with 24 teeth per inch. The blades are bi-metal - an HSS tooth welded to an HCS body - with a hardness of HRC 62-68. The blade tension stated by the manufacturer is 180 N. Bi-metal: hard tooth, flexible body The bi-metal blade settles the old compromise in hacksaw blades. The tooth is high-speed HSS steel, which takes the heat and the wear of cutting steel; the body is the tougher carbon HCS steel, which bends instead of breaking. The two are joined by a weld along the whole length. The result is a blade that does not crack when it is slightly twisted in the cut - the commonest reason a one-piece blade fails long before its teeth are blunt. The 24 TPI pitch 24 teeth per inch is the mid-range pitch for this blade size: fine enough for thin-walled tube and section, coarse enough not to clog in thicker material. Which saw they fit One hundred and fifty millimetres is the junior hacksaw length - the one-handed frame that reaches where a full-size saw cannot: into a duct, behind a pipe, between two sections. The blades mount in a standard hacksaw frame through the holes at each end and are tensioned with the frame's wing nut. Tension matters: a slack blade twists in the cut and breaks long before it goes blunt. Applications Cutting steel and copper pipe, sections, sheet, threaded rod, bolts, aluminium and plastic - hand cutting in installation, assembly and repair work. A pack of three is about what one site job consumes. Technical specifications Part number1600A03AC9 EAN4059952737461 Length150 mm Number of teeth24 TPI MaterialBi-Metal, HSS + HCS HardnessHRC 62-68 Blade tension180 N Packaging typepaper / cardboard / corrugated board, packaging with Euro hole Pack quantity3 pcs ManufacturerBosch Professional Questions and Answers How many blades are in the pack? Three. Bosch states a pack quantity of 3 pcs for part number 1600A03AC9. What does bi-metal mean? The tooth is high-speed HSS steel and the body is carbon HCS steel, the two joined by a weld. The tooth takes the wear while the body bends instead of cracking in the cut. What material is 24 TPI for? At 24 teeth per inch the blade suits pipe, section and thicker material where a finer pitch would clog. Do they fit any hacksaw? The blades are 150 mm long with a hole at each end - the standard form for hand hacksaw frames of that size. Check the pin spacing quoted for your frame before ordering. What is the hardness? Bosch states HRC 62-68 for these blades. That is the usual range for bi-metal hacksaw blades - hard enough to cut steel without the teeth going blunt quickly. Why does a blade break before it goes blunt? Almost always because it was not tensioned enough in the frame, or because it was twisted in the cut. A slack blade flexes and cracks. Bi-metal construction reduces the risk but does not remove the need for proper tension. Is there another size in the range? Yes. The range includes 150 mm blades at 24 TPI (1600A03AC9) and 300 mm blades at 32 TPI (1600A03A7Z), both in packs of three and both bi-metal. ..

Bosch Socket Wrench 2608522353Description: The Bosch Impact Control 2608522353 socket wrench is a high-quality tool made of S2 modified steel that has been heat-treated to ensure high durability and a long service life. It is suitable for impact wrenches and impact drivers, withstanding extremely high torque and intensive use. It is part of the Bosch Pick and Click system, which allows for individually assembled accessory sets for a completely flexible range of bits. The socket has a 1/4" drive and is 13 mm.Technical specifications:Brand: Bosch;Model: 2608522353;Chuck type: 1/4";Size: 13 mm;Material: S2;Also suitable for: impact drivers;..