Consumables for tools - Page 22

DeWALT DWMT81534-1 Socket Set and Hand ToolsDescription: The DeWALT DWMT81534-1 socket set is an exceptionally convenient and versatile collection of hand tools designed for both professionals and DIY enthusiasts. It consists of 37 pieces, including 1/2", 1/4" , and 3/8" drive sizes to meet various needs and projects. This set includes a variety of tools that allow the user to handle tasks of varying complexity. The tools are made of high-quality chrome-vanadium steel, which ensures durability and longevity. Their anti-corrosion chrome-plated finish helps extend the tools' lifespan and protect against rust. One of the key technologies in this set is DirectTorque . This technology improves the tools' grip, allowing the user to apply greater force without having to exert excessive effort. The parts come in a convenient plastic storage case, making them easy to transport and organize. Technical specifications:Number of parts: 205 Drive sizes: 1/2", 1/4", and 3/8"Working end size: 4-21 mmMaterial: chrome-vanadium steelWeight: 12.146 kgSet includes:3 x ratchets18 x 1/2" sockets22 x 1/4" sockets22 x 3/8" sockets20 x 1/4" deep sockets22 x 3/8" deep sockets10 x combination wrenches8 x adapters and extensions28 x hex keys1 x screwdriver for bits18 x sockets33 x bits..

DeWALT DWMT81610-0 Bit Set and Hand ToolsDescription: The DeWALT DWMT81610-0 socket set is an extremely convenient and versatile set of hand tools designed for professionals and DIY enthusiasts. It consists of 50 pieces with a 1/4" drive, making it ideal for working with smaller bolts and screws. This set includes 22 bits, as well as 23 -inch and metric sockets, which guarantee high quality and a long service life. The set also features 2 extensions, a handle, and an adapter, which facilitate access to hard-to-reach areas and increase work flexibility. The ratchet has 72 teeth, which means you can use the tool in tight spaces without having to move it back and forth with every turn. The quick-change socket button is extremely convenient and allows for quick and easy accessory changes while working. The parts come in a convenient plastic storage case, making them easy to transport and organize. Technical specifications:Number of pieces: 50Drive size: 1/4"Type of working end: internal 6-pointDrive type: squareSocket size: 4-14 mm, 5/32-9/16"Material: chrome-vanadium steelWeight: 1.380 kgSet includes:23 x 1/4" sockets: 4 / 4.5 / 5 / 6 / 7 / 8 / 9 / 10 / 11 / 12 / 13 / 14 mm5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 1/2", 9/16"22 x Bits1 x 72-tooth ratchet1 x Adapter2 x 1/4" extension: 3", 6"1 x Screwdriver for bits..

DeWalt FLEXTORQ Drill Drive Set, 32 Pieces, DT70741T-QZ DeWalt DT70741T-QZ is a 32-piece drilling and driving set made up of EXTREME FLEXTORQ bits, three hex-shank drill bits, a magnetic holder and an 8 mm nut driver, laid out in a tough case. The torsion zone - why FLEXTORQ exists FLEXTORQ bits have a built-in torsion zone - a deliberately weakened section between tip and shank. With an impact driver, torque does not arrive smoothly but as a rapid series of blows. Without a torsion zone each of those spikes reaches the tip directly and breaks it; with one, the zone twists elastically and absorbs the blow, springing back between impulses. That is the difference in bit life under power driving - and it shows most clearly on Torx and Pozidriv fasteners, where the tip is slender. What the set contains 12 Pozidriv 25 mm bits: PZ1, 8 x PZ2, 3 x PZ3 2 Phillips 25 mm bits: PH2, PH3 1 slotted 25 mm bit: SL6 7 Torx 25 mm bits: T15, 2 x T20, 2 x T25, 2 x T30 3 Pozidriv 57 mm bits: 2 x PZ2, 1 x PZ3 1 Pozidriv 89 mm bit: PZ2 1 Phillips 89 mm bit: PH2 1 cleanable 8 mm nut driver 1 magnetic bit holder with torsion zone 3 hex-shank drill bits: 5, 6 and 8 mm Why so many PZ2 Eight of the twelve short Pozidriv bits are PZ2 - and that is not an oversight in the selection. PZ2 is the profile on the great majority of wood and plasterboard screws in European construction, so it wears out many times faster than any other. A set with one bit per profile runs out exactly when the PZ2 goes blunt; with eight of them, the work continues. Three lengths for three situations 25 mm is the standard length for use in a holder. 57 mm and 89 mm come into their own when the screw head sits down a recess - in a hole, between studs, in the corner of a box - where a short bit in a holder simply does not reach. Long bits are also more forgiving of slight misalignment, because the length itself allows some flex. Hex-shank drill bits The three drill bits (5, 6 and 8 mm) have a hex shank rather than a round one. That means they go straight into the bit holder or into an impact driver, with no change of tool. The practical consequence during installation: drill the hole and drive the screw immediately, with a two-second bit change instead of unclamping a chuck. The case The set comes in a tough case compatible with the TSTAK system via the caddy and the large case in the range. Every bit has its own slot, which means a missing bit is visible at a glance - the simplest defence against a set scattering across the job. Technical specifications ManufacturerDeWalt Article numberDT70741T-QZ RangeEXTREME FLEXTORQ Piece count32 Pozidriv 25 mm bits12 (PZ1, 8 x PZ2, 3 x PZ3) Phillips 25 mm bits2 (PH2, PH3) Slotted 25 mm bit1 (SL6) Torx 25 mm bits7 (T15, 2 x T20, 2 x T25, 2 x T30) 57 mm bits3 (2 x PZ2, PZ3) 89 mm bits2 (PZ2, PH2) Nut driver1 x 8 mm, cleanable Magnetic holder1, with torsion zone Drill bits3 hex shank: 5, 6, 8 mm Bit featureBuilt-in torsion zone PackagingTough case, TSTAK compatible Questions and Answers What does the torsion zone do? A deliberately weakened section between tip and shank that twists elastically when torque spikes, absorbing the blow instead of letting it reach the tip. On an impact driver, torque arrives as a series of sharp impulses - exactly what breaks ordinary bits. How many bits are in the set, and which? 32 pieces in total: 12 short Pozidriv, 2 Phillips, 1 slotted, 7 Torx, 3 medium and 2 long bits, an 8 mm nut driver, a magnetic holder and three hex-shank drill bits in 5, 6 and 8 mm. Why are there eight PZ2 bits? PZ2 is the profile on the great majority of wood and plasterboard screws in European construction and wears out many times faster than the rest. A set with one bit per profile runs out exactly when the PZ2 goes blunt. What are the drill bits and what are they for? Three drill bits in 5, 6 and 8 mm with a hex shank, which fit straight into the bit holder or an impact driver. That lets you drill a hole and drive the screw immediately, without unclamping a chuck. What are the 57 and 89 mm bits for? For screw heads that sit down a recess - in a hole, between studs or in the corner of a box - where a short bit in a holder does not reach. Long bits are also more forgiving of slight misalignment. Is the case compatible with other systems? Yes - the tough case is compatible with the TSTAK system through the caddy and the large case in the range, so the set fits into an existing stack. Can it be used with an ordinary drill driver? Yes. The bits have a universal 1/4" hex and work with any machine. The torsion zone simply is not loaded under smooth torque - its advantage shows specifically with an impact driver. ..

DeWalt Impact Ready Drill Tap Set, M4-M10, 5 Pieces, DT50060-QZ DeWalt DT50060-QZ is a set of five drill taps in M4, M5, M6, M8 and M10, with a 1/4" hex shank made for an impact driver. Each tool is three in one: it drills the hole, cuts the thread and countersinks - in a single pass. Three operations in one tool The usual route to a tapped hole is three separate tools and three changes: a drill for the pilot hole, a tap for the thread and a countersink for the chamfer. On these tools the tip drills, the middle section taps, and the upper section countersinks and clears the burr. The gain is not only time: it also removes the pilot-hole diameter error - the most common cause of a snapped tap or a thread that will not hold. Why a 1/4" hex shank The shank is a 1/4" hex, so the tool goes straight into an impact driver or a bit holder. Traditional tapping with a hand wrench takes feel and time; an impact driver does the same job in seconds. The shank is Impact Ready - hardened to absorb the sharp impulses that break ordinary shanks. The tip The tip uses a speed geometry that penetrates the material quickly and does not walk across the surface on starting. With an impact driver that matters: the machine does not give a gentle start, and an ordinary drill point would skate sideways before it bit. Which materials The tools are intended for metal and plastics. Typical applications are threads in sheet steel, metal sections, brackets and cabinets, fixing hangers and cable routes - anywhere threads are cut on site rather than in a workshop. Choosing the size The set covers M4 to M10 - the range that takes in most installation work. The pitch is metric standard, right-hand thread. Material thickness matters: for a thread to carry load you need at least two or three turns engaged, so in thin sheet the larger sizes cut cleanly but carry nothing. Working with them Keep the tool perpendicular to the surface - misalignment is the main cause of breakage. Do not stop halfway: one continuous pass produces a cleaner thread than several stops. In thicker metal, use cutting lubricant - it lowers the temperature and multiplies the tool's life. Withdraw in reverse under power, without pulling. Technical specifications ManufacturerDeWalt Article numberDT50060-QZ TypeDrill taps, three in one Piece count5 SizesM4, M5, M6, M8, M10 Shank1/4" hex, Impact Ready FunctionsDrilling, tapping, countersinking ThreadMetric standard, right hand LengthApproximately 156 mm MaterialsMetal and plastics Questions and Answers Do I need to drill a pilot hole first? No. The tool is three in one: the tip drills, the middle section cuts the thread and the upper section countersinks. That also removes pilot-hole diameter error - the most common cause of a snapped tap. Which sizes are in the set? Five sizes: M4, M5, M6, M8 and M10 - the range that covers most installation work. The thread is metric standard, right hand. What machine are they used with? The shank is a 1/4" hex that goes straight into an impact driver or a bit holder. It is Impact Ready - hardened to absorb the sharp impulses that break ordinary shanks. Which materials do they work in? Metal and plastics. Typical uses: threads in sheet steel, metal sections, brackets and cabinets, fixing hangers and cable routes - anywhere threads are cut on site. Does material thickness matter? Yes. For a thread to carry load you need at least two or three turns engaged. In thin sheet the larger sizes cut cleanly but hold nothing - there you use a smaller size or a nut on the far side. How do I avoid breaking one? Keep the machine perpendicular - misalignment is the main cause of breakage. Do not stop halfway: one continuous pass gives a cleaner thread. In thicker metal use cutting lubricant. How is the tool withdrawn after tapping? In reverse under power, without pulling. Pulling it out by hand while it is still turning damages the first few turns of the thread - exactly the ones that carry the most load. ..

Brand: DeWALT Model: DCN890Pack size (pcs.): 1005 pcs.Weight: 1.30 kgFlat-head concrete nails manufactured using state-of-the-art technology and the finest materials. Guaranteed high environmental performance and optimal rust protection. Compatible with DCN890..

Brand: DeWALT Model: DCN890 Pack size (pcs.): 1005 pcs. Weight: 1.30 kgFlat-head concrete nails manufactured using state-of-the-art technology and the finest materials. Guaranteed high environmental performance and optimal rust protection. Compatible with DCN890..

Brand: DeWALT Model: DCN890 Pack size (pcs.): 1,005 pcs. Weight: 1.30 kgFlat-head concrete nails manufactured using state-of-the-art technology and the finest materials. Guaranteed high environmental performance and optimal rust protection. Compatible with DCN890..

The blade's 50% stronger body reduces the risk of breakage. The reinforced tooth design contributes to greater cutting precision and a longer service life. The bimetal construction provides improved flexibility and durability. Sold in a pack of 3...

DeWALT H1300113008 Toolbox LinerDescription: The DeWALT H1300113008 toolbox organizer is made of high-quality plastic, ensuring high durability and strength. It is designed for the DS300 and DS400 models and will provide you with easy storage and a tidy workspace. Features:Compatible with: DS300, DS400Material: PlasticWeight: 0.3 kg..

DeWALT 16 GA StaplesDescription:DeWALT16 GA nails, 32 mm long and 1.6 mm thick, are ideal for woodworking applications. They have a 20° angle and are galvanized, making them corrosion-resistant. These nails are compatible with models such as the DCN660P2, DCN660D2, DC618KB, and DC610, providing a reliable and secure fastening when working with nail guns. Technical Specifications:Length: 32 mm Thickness: 1.6 mm Nail type: 16GAMaterial: galvanized wireAngle: 20°Packaging: 2,500 pcs.For models: DCN660P2, DCN660D2, DC618KB, and DC610..

DeWALT 16 GA StaplesDescription:DeWALT16 GA nails, 38 mm long and 1.6 mm thick, are ideal for woodworking applications. They feature a 20° angle and are galvanized, making them corrosion-resistant. These nails are compatible with models such as the DCN660P2, DCN660D2, DC618KB, and DC610, providing a reliable and secure fastening when working with nail guns. Technical Specifications:Length: 38 mm Thickness: 1.6 mm Nail type: 16GAMaterial: galvanized wireAngle: 20°Packaging: 2,500 pcs.For models: DCN660P2, DCN660D2, DC618KB, and DC610..

DeWALT 16 GA StaplesDescription:DeWALT16 GA nailer nails, 44 mm long and 1.6 mm thick, are ideal for woodworking applications. They have a 20° angle and are galvanized, making them corrosion-resistant. These nails are compatible with models such as the DCN660P2, DCN660D2, DC618KB, and DC610, providing a reliable and secure fastening when working with nail guns. Technical Specifications:Length: 44 mm Thickness: 1.6 mm Nail type: 16GAMaterial: galvanized wireAngle: 20°Packaging: 2,500 pcs.For models: DCN660P2, DCN660D2, DC618KB, and DC610..

DIAMOND MAXTM diamond drill bits are specially designed for professionals who need to drill into extremely hard materials such as porcelain, ceramic tiles, breakable tiles, cast iron, or fiberglass-materials that are difficult to work with using conventional drill bits. These drill bits guarantee excellent performance and outstanding durability even in the most demanding materials. M14 thread: For direct mounting on an angle grinder. Dry drill bits-no water cooling required. Clean holes: Drill clean and precise holes without scratching the surface. Service life: Designed to ensure a long service life...

Inner diameter: 22.23 mm..