Consumables for tools - Page 14

Technical Specifications Width 10 mm Total length 22 mm Wire thickness 0.6 mm Wire width 1.2 mm For models DST220, DST221, T221D Quantity (pcs./set) 5,040 / 1..

DeWALT DWST82732-1 Sheet ClipboardDescription: The DeWALT TSTAK DWST82732-1 clipboard is an extremely convenient and compact accessory for any craftsman. Not only will it serve as a stand when you need to sign important documents, but it will also help you store them afterward in its convenient interior compartment. It is also suitable for storing your personal belongings such as a phone, documents, money, and other important items while you work. It features a convenient clip for holding documents, as well as an LED flashlight for those who work late. The interior is also organized with a zippered pocket for maximum convenience. It can be attached to TSTAK cases for greater ease of transport. Technical specifications:Width: 413 mmHeight: 35 mmDepth: 285 mmLength: 920 mmIncluded:1 x AA battery..

Stanley FMST82721-1 ClipboardDescription: The Stanley FMST82721-1 document clipboard is an extremely convenient and compact accessory for any professional. Not only will it serve as a support when you need to sign important documents, but it will also help you store them afterward in its convenient interior compartment. It is also suitable for storing your personal items such as a phone, documents, money, and other important belongings while you work. It features a convenient clip for holding documents, as well as an LED flashlight for those who work late. The interior is also organized with a zippered pocket for maximum convenience. Compatible with Stanley FATMAX and PRO-STACK storage systems and features rubber corners for a long service life. Technical specifications:Dimensions: 415x285x35 mmWeight: 0.9 kg..

Pica Dry Coloured Caps, 5 pcs - 55801 Pica 55801 is an accessory for the Pica Dry automatic pencil - a set of 5 coloured caps in white, yellow, red, blue and dark green. They let several Pica Dry pencils be told apart by colour - for example by the lead loaded in each - so the right pencil is found quickly. Contents and pack The bag holds one cap of each colour. The manufacturer packs the caps in clear bags with a hanging tab. Pica supplies them to dealers on a clip strip with 10 bags and a metal hook for hanging in the store, while the price here is for one bag of 5 caps. Which pencil they fit Pica presents the caps as an accessory for Pica Dry - the deep-hole automatic pencil (article 3030) that takes 2.8 mm leads. According to the manufacturer the pencil has a Power Lock mechanism for a stronger hold on the lead. Pica Dry can be loaded with different leads: water-soluble Multi-Use 2B, water-jet-resistant special leads, carpenter leads H and summer leads 2B. When pencils with different leads are in use, the coloured cap shows which one is loaded. Coloured leads for Pica Dry Besides graphite, Pica Dry also takes coloured refill leads - for example the 4040 set of water-jet-resistant special leads in blue, white and green, or the single-colour 4041 (blue), 4042 (green) and 4043 (white). The coloured caps do not replace the leads - they only mark the pencil. Technical specifications ManufacturerPica-Marker Article55801 TypeColoured caps for automatic pencil CompatibilityPica Dry (3030) Number of caps5 ColoursWhite, yellow, red, blue, dark green PackClear bag with hanging tab EAN4260056159510 Supply to dealersClip strip with 10 bags and metal hook Questions and Answers Which pencil are the caps for? Pica presents them as an accessory for the Pica Dry automatic pencil, article 3030. How many caps are in the set? The bag holds 5 caps - one each in white, yellow, red, blue and dark green. The price is for one bag. What are the coloured caps for? They let several Pica Dry pencils be told apart by colour, for example by the type of lead loaded. That way the right pencil is found quickly. Which leads are there for Pica Dry? Pica offers water-soluble Multi-Use 2B leads, water-jet-resistant special leads, carpenter leads H and summer leads 2B. The leads are 2.8 mm in diameter. Do they fit Pica Fine Dry or BIG Dry? The manufacturer lists the caps as an accessory for Pica Dry. For Pica Fine Dry, Pica's accessories include a spare eraser rather than coloured caps. How are the caps packed? The caps come in a clear bag with a hanging tab. Pica supplies them to dealers on a clip strip with 10 bags. Are there coloured leads for Pica Dry? Yes, for example the 4040 set of water-jet-resistant special leads in blue, white and green, and the single-colour 4041, 4042 and 4043. The coloured caps do not replace the leads, they only mark the pencil. ..

METABO 624310000 Concrete Cutting DiscDescription: The METABO SP-U concrete diamond blade is equipped with a segmented edge that ensures aggressive and fast cutting, combined with high performance and long tool life. This blade is ideal for use on various structures and building materials such as concrete, exposed aggregate concrete, hard sandstone, and clay tiles. The tooth height is 10 mm, which provides stability and durability during operation. Technical Specifications:Blade diameter: 230 mmTooth dimensions: 40.3 x 2.4 x 10 mmBore size: 22.23 mmNumber of teeth: 16Type: SP-U..

Hawera Power LX Plus SDS-plus Concrete Drill Bit, 8 x 200/265 mm, 266599 Hawera 266599 is a hammer drill bit from the Power LX Plus range with an SDS-plus shank, 8 mm diameter, a working length of 200 mm and an overall length of 265 mm. It is made for rotary hammers running in hammer-and-rotation mode and is used in concrete, reinforced concrete, brick and stone. Eight millimetres is the classic size for an 8 mm anchor, and 200 mm of working length is enough to go through a brick wall or through insulation into the load-bearing substrate. Four-cutter head The carbide head carries four cutting edges. When the bit meets rebar, at least one edge is always in contact with the steel, so the bit keeps cutting instead of jamming and snapping. That is exactly where a conventional two-cutter bit fails in reinforced concrete, and why four-cutter heads have become the standard for load-bearing fixings. Centring tip and dust removal A sharp centring tip bites on first contact and guides the hole from the start, instead of letting the bit wander across the surface. The shape of the head combined with large, short flutes clears dust quickly, and the four-start helix keeps the removal even along the whole working length. Less dust in the hole means less friction, less heat and longer carbide life. SDS-plus shank The SDS-plus shank fits without a key and without tightening: push it into the chuck until it clicks. It lets the bit slide a few millimetres lengthwise, so the piston's blow reaches the tip directly rather than being absorbed by the chuck. The bit works in every rotary hammer with an SDS-plus chuck, whatever the brand, and is not intended for an ordinary percussion drill. A note on the length figures In Hawera's catalogue article 266599 is listed as 8 x 265 x 200 mm - 265 mm overall and 200 mm usable. The 65 mm difference is the SDS-plus shank together with the transition into the helix. Technical specifications ManufacturerHawera RangePower LX Plus Article266599 TypeHammer drill bit for concrete ShankSDS-plus Diameter8 mm Working length200 mm Overall length265 mm HeadCarbide, four cutting edges HelixFour-start, large short flutes Suitable materialsConcrete, reinforced concrete, brick, stone ApplicationRotary hammers with SDS-plus chuck EAN3165140945998 Pack quantity1 piece Questions and Answers Which anchor size does this diameter suit? An 8 mm diameter matches an 8 mm nylon or metal anchor - the most common size for hanging cabinets, brackets, radiators and shelving in concrete and solid brick. Clear the dust out of the hole before setting the anchor, otherwise its holding capacity drops. How deep a hole can I drill? The working length is 200 mm, so that is the maximum hole depth. The 265 mm overall length includes the SDS-plus shank and the transition into the helix, which stay outside the material. Will it fit my rotary hammer? Yes, if the chuck is SDS-plus. The shank pushes in until it clicks, with no key and no tightening. The bit is not intended for an ordinary percussion drill with a three-jaw chuck and does not fit an SDS-max chuck. Will it cut through rebar? Yes. The head has four cutting edges, so when it meets rebar at least one edge is always in contact with the steel and the bit keeps cutting rather than jamming. With a long run of rebar, reduce the pressure and where possible avoid the main reinforcement. Can I run it in hammer-only mode? No. This is a drill bit, not a chisel. Hammer-only mode is for chisels and points. The bit works only in hammer-and-rotation mode, otherwise the carbide head breaks. How does it differ from a two-cutter bit? A two-cutter bit has only two cutting edges, and when one of them hits rebar the bit jams and snaps easily. A four-cutter head spreads the blow across more edges, runs more steadily in reinforced concrete and leaves a more accurate hole. Does it need lubrication or cooling? No. Drilling in concrete is done dry. What matters is clearing the hole - pull the bit out a few times during the job, because accumulated dust increases friction and overheats the carbide. ..

Hawera power LX plus Concrete Drill Bit, SDS-plus, Ø12 x 165 x 100 mm Hawera 266615 is a hammer drill bit for concrete with an SDS-plus shank. Diameter is Ø12 mm, overall length 165 mm and working (useful) length 100 mm. EAN 3165140946155. About the photograph Hawera publishes one image for the whole size range; it carries no etched size and does not show the exact proportions of this particular length. The figures are what count: this article is Ø12 x 165 x 100 mm. The two lengths are not the same thing Read the figures like this: 165 mm is the whole bit, 100 mm is the flute - how deep it can actually drill. The 65 mm difference is the SDS-plus shank sitting in the chuck. Choose depth by the working length, never the overall - that is the commonest reason a bit turns out too short. The SDS-plus shank SDS-plus is the standard for light and medium rotary hammers - a shank with two closed and two open grooves. The bit pushes into the chuck and locks itself, no key. This shank does not fit an ordinary drill; that needs a round-shank bit. Hawera and Bosch Hawera is DREBO's accessory brand, distributed across Europe through Bosch's channels - which is why the EANs begin 3165140. The power LX plus range is the middle class: tougher than the basic line, without the price of four-cutter rebar bits. What it is and is not for It works in concrete, brick, stone and block. It is not for rebar - a two-cutter bit dulls or jams on steel, and that job wants four-cutter geometry. Nor for tile: the hammer action cracks the glaze. Making it last Withdraw the bit several times while drilling so the dust escapes - dust packed between flute and wall is what overheats the tip. Work without leaning on it: the hammer does the striking, you only steer. Heavy pressure does not speed the hole, it wears the carbide. Technical specifications ManufacturerHawera (DREBO) Article266615 Rangepower LX plus ShankSDS-plus DiameterØ12 mm Overall length165 mm Working length100 mm MaterialsConcrete, brick, stone, block Not forRebar, ceramic, tile EAN3165140946155 Questions and Answers What exactly is the size? Ø12 x 165 x 100 mm - diameter, overall length, working length. What is the difference between the two lengths? 165 mm is the whole bit; 100 mm is the flute, the real drilling depth. Which machine does it fit? A rotary hammer with an SDS-plus chuck. It does not fit an ordinary drill. Will it go through rebar? No. This is a two-cutter bit and steel dulls it. Rebar needs four-cutter geometry. Is it suitable for tiles? No. The hammer action cracks the glaze; tiles have their own non-percussion range. Is the photo of this exact size? Hawera publishes one image for the whole range, with no etched size. The figures in the description are what count. How do I make it last? Withdraw it several times so the dust escapes, and do not press hard - the hammer strikes, you only steer. ..

Hawera power LX plus Concrete Drill Bit, SDS-plus, Ø8 x 115 x 50 mm Hawera 266596 is a hammer drill bit for concrete with an SDS-plus shank. Diameter is Ø8 mm, overall length 115 mm and working (useful) length 50 mm. EAN 3165140945967. About the photograph Hawera publishes one image for the whole size range; it carries no etched size and does not show the exact proportions of this particular length. The figures are what count: this article is Ø8 x 115 x 50 mm. The two lengths are not the same thing Read the figures like this: 115 mm is the whole bit, 50 mm is the flute - how deep it can actually drill. The 65 mm difference is the SDS-plus shank sitting in the chuck. Choose depth by the working length, never the overall - that is the commonest reason a bit turns out too short. The SDS-plus shank SDS-plus is the standard for light and medium rotary hammers - a shank with two closed and two open grooves. The bit pushes into the chuck and locks itself, no key. This shank does not fit an ordinary drill; that needs a round-shank bit. Hawera and Bosch Hawera is DREBO's accessory brand, distributed across Europe through Bosch's channels - which is why the EANs begin 3165140. The power LX plus range is the middle class: tougher than the basic line, without the price of four-cutter rebar bits. What it is and is not for It works in concrete, brick, stone and block. It is not for rebar - a two-cutter bit dulls or jams on steel, and that job wants four-cutter geometry. Nor for tile: the hammer action cracks the glaze. Making it last Withdraw the bit several times while drilling so the dust escapes - dust packed between flute and wall is what overheats the tip. Work without leaning on it: the hammer does the striking, you only steer. Heavy pressure does not speed the hole, it wears the carbide. Technical specifications ManufacturerHawera (DREBO) Article266596 Rangepower LX plus ShankSDS-plus DiameterØ8 mm Overall length115 mm Working length50 mm MaterialsConcrete, brick, stone, block Not forRebar, ceramic, tile EAN3165140945967 Questions and Answers What exactly is the size? Ø8 x 115 x 50 mm - diameter, overall length, working length. What is the difference between the two lengths? 115 mm is the whole bit; 50 mm is the flute, the real drilling depth. Which machine does it fit? A rotary hammer with an SDS-plus chuck. It does not fit an ordinary drill. Will it go through rebar? No. This is a two-cutter bit and steel dulls it. Rebar needs four-cutter geometry. Is it suitable for tiles? No. The hammer action cracks the glaze; tiles have their own non-percussion range. Is the photo of this exact size? Hawera publishes one image for the whole range, with no etched size. The figures in the description are what count. How do I make it last? Withdraw it several times so the dust escapes, and do not press hard - the hammer strikes, you only steer. ..

BOSCH 2608576194 Concrete Drill BitDescription: The BOSCH 2608576194 concrete drill bit delivers long-lasting performance when drilling into concrete. Its solid carbide head with 4 cutting edges is made from the highest quality carbide, which reinforces the head and ensures exceptional impact resistance. The even distribution of drilling power ensures no loss of power, which increases the overall service life. This drill bit is designed for hammer drilling in masonry, concrete, and reinforced concrete. It is compatible with hammer drills featuring SDS plus chucks. Technical specifications:Outer diameter: 8 mmLength: 165 mmWorking length: 100 mmChuck: SDS-plusMaterial: HMCutting edges: 4 Packaging quantity: 1 pcApplication: for concrete and reinforced concrete ..

BOSCH 2608706847 Concrete Drill BitDescription:The BOSCH 2608706847 concrete drill bit, with a diameter of 14 mm, a length of 340 mm, and a working length of 200 mm, is designed for extremely demanding applications and ensures maximum efficiency when drilling into reinforced concrete. Thanks to BOSCH Carbide Technology, the drill bit features a tip made entirely of ultra-hard metal, which ensures superior wear resistance and a long service life, even during the most demanding tasks. The drill bit is equipped with a high-performance tip featuring four cutting edges, which not only increases drilling speed but also improves stability and precision. BOSCH welding technology ensures an exceptionally strong bond between the carbide head and the steel body of the drill bit, allowing for reliable operation during hammer drilling with impact drills, without the risk of loosening or breaking. The ideal choice for construction and installation professionals seeking reliability, durability, and high performance when drilling into reinforced concrete and other hard materials.Technical specifications:Outer diameter: 14 mmLength: 340 mmWorking length: 200 mmChuck: SDS-maxMaterial: HMCutting edges: 4Quantity per package: 1 pcApplication: for concrete and reinforced concrete..