1/2"-20 UNF DT7030-QZ Manufacturer: DeWALT..

DeWALT DWST08017-1 Tool Case AdapterDescription: The DeWALT DWST08017-1 Case Adapter measures 37 x 55 x 7 cm and is specially designed to connect cases from the TSTAK and ToughSystem 2.0 series. It allows you to organize your tools and accessories, making them more easily accessible while working. The adapter is equipped with integrated slots on both sides that allow you to hang power tools and accessories using the belt hook. Made of high-quality polypropylene, the adapter is water-resistant, making it suitable for use in various conditions. Technical specifications:Dimensions: 37 x 55 x 7 cmMaterial: polypropylene..

BOSCH Power Change Plus HSS-Co Core Drill Adapter, 16-152 mm The BOSCH Power-Change adapter for bi-metal core bits has a diameter ranging from 16 to 152 mm. It comes with a centering drill bit made of hardened alloy high-speed steel. Suitable for drilling wood, plastic, and metal. Hex shank. The drill bit is designed for Bosch Progressor wood and metal saws with a mounting system. The adapter has an 8.7 mm hex shank. The original adapter is made of high-quality materials and will last a long time. The HSS-Co center drill ensures a precise and accurate start to drilling. The adapter is very reliable and durable; the unique Power-Change Plus system allows you to quickly and easily change the drill bit without using a wrench. Unique keyless chuck system. Suitable for use with all corded and cordless drills. Technical specifications: Brand: BOSCH;Material: HSS-Co;Diameter: 16-152 mm;Length: 65 mm;Shank: 1/4" hex shank;Application: wood, plastic, and metal;Use: for drills;Dimensions (LxWxH): 241 x 80 x 35 mm;Weight: 0.170 kg...

BOSCH Power Change Plus HSS-G Drill Bit Adapter for Core Bits, 16-210 mm The BOSCH Power-Change adapter for bi-metal core bits has a diameter ranging from 16 to 210 mm. It comes with a centering drill bit made of hardened alloy high-speed steel. Suitable for drilling wood, plastic, and metal. Hex shank. The drill bit is designed for Bosch Progressor wood and metal saws with a mounting system. The adapter features an 8.7 mm hex shank. The original adapter is made of high-quality materials and will last a long time. The HSS-G center drill ensures a precise and accurate start to drilling. The adapter is very reliable and durable; the unique Power-Change Plus system allows you to quickly and easily change the bit without using a wrench. Unique keyless chuck system. Suitable for use with all corded and cordless drills. Technical specifications: Brand: BOSCH;Material: HSS-G;Diameter: 16-210 mm;Length: 85 mm;Shank: 1/4" hex shank;Application: wood, plastic, and metal;Use: for drills;Dimensions (LxWxH): 241 x 80 x 35 mm;Weight: 0.180 kg...

Adapter for core bits with shank and drill bit, BOSCH Power Change Plus, SDS, Plus HSS-G, 16-210 mm The BOSCH Power-Change adapter for bi-metal core bits has a diameter ranging from 16 to 210 mm. It comes with a centering drill bit made of hardened alloy high-speed steel. Suitable for drilling wood, plastic, and metal. Hex shank. The drill bit is designed for Bosch Progressor wood and metal saws with a mounting system. The adapter features an 8.7 mm hex shank. The original adapter is made of high-quality materials and will last a long time. The HSS-G center drill ensures a precise and accurate start to drilling. The adapter is very reliable and durable; the unique Power-Change Plus system allows you to quickly and easily change the drill bit without using a wrench. Unique keyless chuck system. Suitable for use with all corded and cordless drills. Technical specifications: Brand: BOSCH;Material: HSS-G;Diameter: 16-210 mm;Length: 85 mm;Shank: 1/4" hex shank;Application: wood, plastic, and metal;Use: for drills;Dimensions (LxWxH): 263 x 80 x 35 mm;Weight: 0.200 kg...

DeWalt DWS5031 Router Guide Rail AdapterFeatures: The DeWalt DWS5031 router guide rail adapter is an essential tool for attaching a guide rail to a router. The adapter is made of high-quality materials and ensures high stability and durability...

Manufacturer: HitachiShank type: SDS-max Length, mm: 220.00 mm Shank: SDS-max Width, mm: 200.00 mm Product descriptionTool holder, SDS-max shank, for tamping plates...

Stanley Adapter 1-17-262Description: The Stanley 1-17-262 adapter is made of high-quality chrome-vanadium steel with a matte chrome finish, ensuring high strength and corrosion resistance. The adapter is suitable for 1/2" to 3/8" sockets. Technical specifications:Overall length: 34 mmMaterial: Chromium-vanadium steelGrip type: 1/2" to 3/8" Quantity per package: 1 pcWeight: 0.053 kg..

Manufacturer: Hitachi D, size: PG 7" Shank type: 6-flute Thread type: external electrical thread For bi-metal core bits: 14-30 mm 6-flute diameter: 8.50 mm Brand: Hitachi Accessories For use with hand-held and stationary drill presses. Hardened drill bit made of alloy high-speed steel. Suitable for cutting wood and metal...

Rotabroach M2AL Raptor Annular Cutter 16 x 25 mm, RAP160 Rotabroach RAP160 is a professional annular cutter from the M2AL Raptor range, 16 mm in diameter with a 25 mm depth of cut. The shank is a 19.05 mm (3/4 in) Weldon with two flats - the standard accepted by practically every magnetic drill on the market. M2AL material Raptor cutters are made from M2AL - high speed steel with an aluminium addition, heat treated at high temperature. The result is greater cutting-edge hardness, a higher cutting speed and longer tool life than an ordinary HSS cutter of the same class. Tooth geometry The Raptor range uses a tooth geometry of its own, developed by Rotabroach and different from that of generic cutters. It spreads the load across more cutting edges, which makes the cut smoother, the chip more controlled and the finished hole more accurate with a cleaner wall. Materials The cutter is intended for mild and structural steel with a tensile strength up to 900 N/mm². That covers the sections, beams, plate and sheet handled in steel fabrication, bridge building, shipbuilding and general engineering. Pilot pin and lubrication The pilot pin is not included - it is ordered separately, and Rotabroach recommends always working with one. The pin centres the start of the cut and ejects the slug at the end of the stroke. Generous lubrication with cutting paste or emulsion multiplies the life of the cutter. Compatibility The 19.05 mm Weldon shank makes the cutter compatible with magnetic drills from Rotabroach, ALFRA, BDS, EUROBOOR, HOUGEN, RUKO, UNIBOR, JEI, Evolution, Powerbor and G&J Hall, and with any other machine using the same holder. Technical specifications ManufacturerRotabroach RangeM2AL Raptor Model / articleRAP160 TypeAnnular cutter Diameter16 mm Depth of cut25 mm MaterialM2AL - high speed steel with aluminium, heat treated Shank19.05 mm (3/4 in) Weldon, two flats Max. tensile strength of workpieceup to 900 N/mm² Suitable materialsMild and structural steel Pilot pinNot included - ordered separately Pack quantity1 piece Questions and Answers What hole does this cutter make? A 16 mm hole up to 25 mm deep. The 25 mm depth is the standard of the RAP range - thicker material is handled by the RAPL variant of the same range, which cuts to 50 mm. What is the shank, and will it fit my machine? The shank is a 19.05 mm (3/4 in) Weldon with two flats. This is the most widespread magnetic drill holder, so the cutter fits machines from Rotabroach, ALFRA, BDS, EUROBOOR, HOUGEN, RUKO, UNIBOR, JEI and others using the same holder. Which materials is it intended for? Mild and structural steel with a tensile strength up to 900 N/mm². It is not intended for hardened steels above that limit - those call for a cutter with tungsten carbide tips. Is the pilot pin included? No. The pin is ordered separately. Rotabroach recommends always using the cutter with a pilot pin - it centres the start of the cut and ejects the slug once the cutter breaks through. Why is it better than a bi-metal hole saw? An annular cutter removes only a ring of material rather than grinding away the whole disc. It therefore cuts several times faster, loads the machine less and leaves a clean-walled hole of accurate diameter, ready for a bolt or a thread. Is lubrication necessary? Yes, always. Cutting paste or emulsion carries heat and swarf away from the teeth. Running dry is the most common cause of premature dulling and broken teeth on annular cutters. What is the difference between M2AL and ordinary HSS? M2AL is high speed steel with an aluminium addition, heat treated at a higher temperature. It gives greater cutting-edge hardness, which allows a higher cutting speed and extends tool life. ..

Rotabroach M2AL Raptor Annular Cutter 19 x 25 mm, RAP190 Rotabroach RAP190 is an annular cutter from the M2AL Raptor range, 19 mm in diameter with a 25 mm cutting depth. It carries a 19.05 mm (3/4 inch) Weldon shank with two flats - the standard that virtually every magnetic drill on the market accepts. Nineteen millimetres is one of the most used sizes in structural steel, because it clears an M16 bolt with normal assembly tolerance. Why an annular cutter rather than a twist drill An annular cutter removes only a ring of material and ejects the core in one piece instead of grinding the whole hole into swarf. At 19 mm in structural steel that means several times less cutting time, noticeably less load on the machine, and a hole with an accurate diameter and a clean wall, ready for a bolt or for tapping. M2AL material Raptor cutters are made from M2AL - high speed steel with an aluminium addition, heat-treated at high temperature. The addition raises the hardness of the cutting edges, which allows a higher cutting speed and extends tool life compared with a plain HSS cutter of the same class. Tooth geometry The Raptor range uses a tooth geometry developed by Rotabroach. It spreads the load across more cutting edges, so the cut runs more calmly, the chip is carried away in a controlled way and the wall of the hole comes out smoother. The cutter is rated for steel with a tensile strength up to 900 N/mm², which covers the sections, beams, sheet and plate used in structural steelwork, bridge building and general engineering. Pilot pin and lubrication The pilot pin is not included. Cutters with a 25 mm cutting depth take the short SRA25 pilot, which covers the whole 13-52 mm diameter range. The pilot centres the start of the cut and pushes the slug out at the end of the stroke. Generous lubrication with cutting paste or emulsion multiplies the life of the cutter - running dry is the most common cause of a broken tooth. Technical specifications ManufacturerRotabroach (G&J Hall Tools) RangeM2AL Raptor Model / articleRAP190 TypeAnnular cutter Diameter19 mm Cutting depth25 mm MaterialM2AL - high speed steel with aluminium, heat-treated Shank19.05 mm (3/4 inch) Weldon, two flats Max. tensile strength of materialup to 900 N/mm² Suitable materialsStructural and mild steel, aluminium, copper, brass Pilot pinNot included - SRA25 for 25 mm depth Pack quantity1 piece Questions and Answers What hole does this cutter make? A 19 mm hole up to 25 mm deep. The 25 mm depth is the standard for the RAP range - for thicker material the RAPL version of the same range cuts to 50 mm. What shank does it have and will it fit my machine? A 19.05 mm (3/4 inch) Weldon shank with two flats. This is the most widespread holder for magnetic drills, so the cutter fits machines from Rotabroach, ALFRA, BDS, EUROBOOR, HOUGEN, RUKO, UNIBOR, JEI and any other with the same holder. Which pilot pin does it need, and is one included? The pilot is not included. Cutters with a 25 mm cutting depth use the short SRA25 pilot, which serves diameters from 13 to 52 mm. Rotabroach recommends always cutting with a pilot fitted - it centres the start of the cut and ejects the slug at the end. What material is it rated for? Structural and mild steel with a tensile strength up to 900 N/mm², plus aluminium, copper and brass. It is not intended for hardened steels above that limit - those call for a cutter with carbide tips. Can I use it in an ordinary drill? No. The cutter needs a machine with a Weldon holder and rigid guidance - in practice a magnetic drill or a pillar drill with a suitable chuck. A hand-held drill cannot guide it accurately enough and the teeth break. Does it need lubrication while cutting? Yes, always. Cutting paste or emulsion carries heat and swarf away from the teeth. Running dry is the most common cause of premature dulling and of broken teeth on annular cutters. What is the difference between M2AL and plain HSS? M2AL is high speed steel with an aluminium addition, heat-treated at a higher temperature. It gives greater hardness at the cutting edges, which allows a higher cutting speed and extends the life of the tool. ..

Milwaukee DEG 125 Angle Grinder Dust CollectorThe Milwaukee DEG 125 dust collector allows for the extraction of harmful dust during surface grinding. Designed for grinding stone and ceramic surfaces with cup wheels. It attaches directly to 125 mm angle grinders without the need for additional tools. It allows for grinding in corners and close to edges thanks to the movable front guard. Suitable for connection to a vacuum cleaner with a vacuum cleaner connection diameter of 27 mm (internal) and 40 mm (external). The guard can only be used with Milwaukee angle grinders: AG 12-115X, AGV 15-125XC, AG 12-125X, AGV 15-125XE, AGV 12-125X, AGV 12-125XPD. Comes with a dust cover and a side safety handle.Technical specifications:Brand: Milwaukee;Application: for angle grinders;Length (mm): 235 mm;Width (mm): 195 mm;Height (mm): 80 mm;Quantity per package: 1 pc.;Weight: 1 kg...

Milwaukee DEC 125 Angle Grinder Dust CollectorDescription: The Milwaukee 4932430467 angle grinder attachment / dust collector allows for the extraction of harmful dust during surface grinding. Designed for grinding stone and ceramic surfaces with cup wheels. It attaches directly to 115 and 125 mm angle grinders without the need for additional tools. It allows for grinding into corners and close to edges thanks to the movable part of the front guard. Technical specifications:Brand: Milwaukee;Application: for angle grinders;Length (mm): 235 mm;Width (mm): 195 mm;Height (mm): 80 mm;Quantity per package: 1 pc.;Weight: 1 kg...