Vermin - Page 10

BOSCH CYL-9 SoftCeramic Glass and Ceramic Drill Bit, 5 x 70 mm The BOSCH CYL-9 SoftCeramic drill bit, with a diameter of 5 mm and a length of 70 mm, is the standard choice for drilling in ceramic tiles. It is suitable for dry drilling without lubrication for convenient use. It features a simple, non-fluted design, particularly suitable for drilling in ceramic tiles. It offers high wear resistance and long-lasting performance when drilling holes in glass, ceramics, and various types of tile. Technical specifications:Brand: BOSCH;Diameter: 5 mm;Overall length: 70 mm;Shank: cylindrical shank;Application: Glass, ceramics, earthenware;Features: carbide tip;Quantity per package: 1 pc.;Weight: 0.040 kg...

BOSCH CYL-9 SoftCeramic Glass and Ceramic Drill Bit, 6 x 80 mm The BOSCH CYL-9 SoftCeramic drill bit, with a diameter of 6 mm and a length of 80 mm, is the standard choice for drilling into ceramic tiles. It is suitable for dry drilling without lubrication for convenient use. It features a simple, non-fluted design, particularly suitable for drilling in ceramic tiles. It offers high wear resistance and long-lasting performance when drilling holes in glass, ceramics, and various types of tile. Technical specifications:Brand: BOSCH;Diameter: 6 mm;Overall length: 80 mm;Shank: cylindrical shank;Application: Glass, ceramics, earthenware;Features: carbide tip;Quantity per package: 1 pc.;Weight: 0.040 kg...

BOSCH CYL-9 SoftCeramic Glass and Ceramic Drill Bit, 8 x 80 mm The BOSCH CYL-9 SoftCeramic drill bit, with a diameter of 8 mm and a length of 80 mm, is the standard choice for drilling in ceramic tiles. It is suitable for dry drilling without lubrication for convenient use. It features a simple, non-fluted design, particularly suitable for drilling in ceramic tiles. It offers high wear resistance and long-lasting performance when drilling holes in glass, ceramics, and various types of tile. Technical specifications:Brand: BOSCH;Diameter: 8 mm;Overall length: 80 mm;Shank: cylindrical shank;Application: Glass, ceramics, earthenware;Features: carbide tip;Quantity per package: 1 pc.;Weight: 0.040 kg...

Makita D-15958 Tile Drill BitDescription: The Makita D-15958 glass drill bit is made of high-quality material and is 65 mm long. Suitable for almost any drill, this tool is used in rotary mode. It is ideal for drilling glass and tiles, ensuring a fast and precise hole without cracks. For perfect results, it is recommended to use it at low speeds in combination with cooling the material. Technical specifications:Application: glass, tilesLength: 65 mmWorking length: 30 mmDiameter: 5 mmShank: 1/4" Quantity per package: 1 pc..

Makita D-15970 Tile Drill BitDescription: The Makita D-15970 glass drill bit is made of high-quality material and is 70 mm long. Suitable for almost any drill, this tool is used in rotary mode. It is ideal for drilling glass and tiles, ensuring a fast and precise hole without cracks. For perfect results, it is recommended to use it at low speeds in combination with cooling the material. Technical specifications:Application: glass, tilesLength: 70 mmWorking length: 35 mmDiameter: 8 mmShank: 1/4" Quantity per package: 1 pc..

Makita D-78433 Glass and Ceramic Drill BitDescription: The Makita D-78433 glass drill bit, with a diameter of 6 mm and a length of 58 mm, is an exceptionally precise and reliable tool designed for working with hard and brittle materials. Equipped with a brazed carbide tip, it ensures efficient and clean drilling without the risk of cracking or damaging the surface. This tool is ideal for drilling in glass, ceramic tiles, and porcelain, ensuring a smooth and precise result. Whether for professional use or home projects, the Makita drill bit offers high quality, durability, and reliability when working with delicate materials. Technical specifications:Diameter: 6 mmOverall length: 58 mmShank: cylindrical shankApplication: for glass and ceramicsFeature: carbide tipDirection: rightDimensions (L x W x H): 58 x 6 x 6 mmQuantity per package: 1 pc..

Bosch EXPERT SDS plus-7X Hammer Drill Bit 10 x 250 x 315 mm, 2 608 900 100 The Bosch EXPERT SDS plus-7X 2 608 900 100 has a diameter of 10 mm, a working length of 250 mm and a total length of 315 mm. The shank is SDS plus, so it fits every rotary hammer with that chuck, whatever the make of the machine. Full carbide head with four cutters The head of the 7X range is made from a single piece of carbide - not two brazed plates, but one solid part - and it has four cutting edges instead of the usual two. That matters in reinforced concrete: a two-cutter bit jams when it hits rebar and eventually breaks, while the four edges of the solid head punch through the steel with no need to stop, re-target or change bits. Service life Bosch states up to 3x longer life than the Bosch SDS plus-3 drill bit. Two things are behind that: the carbide itself, made with Bosch Carbide Technology, and the special welding process that joins the head to the body - the point at which a hammer drill bit most often fails under load. Flute and dust removal The body carries a helical flute that clears dust out of the hole. Withdrawing the bit periodically on deep holes helps the flute do its job, and a cooler bit keeps its carbide edge longer. Applications Drilling reinforced concrete, concrete, natural stone and masonry - anchors, plugs, chemical anchors, suspended ceilings, electrical installations and plumbing runs. The bit is for hammer mode only; drilling concrete without percussion simply wears the carbide away to no purpose.Technical specifications BrandBosch Professional RangeEXPERT SDS plus-7X Part number2 608 900 100 EAN4059952531731 TypeHammer drill bit Diameter10 mm Working length250 mm Total length315 mm ShankSDS plus HeadFull carbide, 4 cutters Service lifeUp to 3x longer than Bosch SDS plus-3 CompatibilityAll rotary hammers with an SDS plus chuck Pack quantity1 pc PackagingPlastic packaging, hanger, with Euro hole Questions and Answers What is the difference between working and total length? The working length (250 mm) is the fluted part that enters the hole - the maximum depth the bit can reach. The total length (315 mm) also includes the SDS plus shank that sits in the chuck. Which machines does this bit fit? Every rotary hammer with an SDS plus chuck, including machines from other brands. SDS plus is an open mounting standard - the bit is pushed in and locks without a key. Why does the head have four cutters? A two-cutter bit jams on rebar and breaks. The full carbide head of the 7X is one solid piece with four edges - it punches through the steel with no need to stop or change bits. How much longer does it last than an ordinary bit? Bosch states up to 3x the service life of the Bosch SDS plus-3 drill bit. The comparison is the manufacturer's and refers to drilling reinforced concrete. Can it be used without hammer action? Not in concrete. The bit is designed for hammer mode - percussion breaks the material and the rotation only clears the dust. Without percussion the carbide wears away quickly and to no effect. Is it suitable for metal, tiles or wood? No. This is a bit for reinforced concrete, concrete, natural stone and masonry. Metal, tiles and wood need bits with a different geometry and a different cutting material. How is the diameter chosen for an anchor? The bit diameter must match the one specified by the fastener manufacturer for that anchor. Clean the dust out of the hole before setting - with chemical anchors that is a condition for the rated load. ..

Bosch EXPERT SDS plus-7X Hammer Drill Bit 6 x 150 x 215 mm, 2 608 900 073 The Bosch EXPERT SDS plus-7X 2 608 900 073 has a diameter of 6 mm, a working length of 150 mm and a total length of 215 mm. The shank is SDS plus, so it fits every rotary hammer with that chuck, whatever the make of the machine. Full carbide head with four cutters The head of the 7X range is made from a single piece of carbide - not two brazed plates, but one solid part - and it has four cutting edges instead of the usual two. That matters in reinforced concrete: a two-cutter bit jams when it hits rebar and eventually breaks, while the four edges of the solid head punch through the steel with no need to stop, re-target or change bits. Service life Bosch states up to 3x longer life than the Bosch SDS plus-3 drill bit. Two things are behind that: the carbide itself, made with Bosch Carbide Technology, and the special welding process that joins the head to the body - the point at which a hammer drill bit most often fails under load. Flute and dust removal The body carries a helical flute that clears dust out of the hole. Withdrawing the bit periodically on deep holes helps the flute do its job, and a cooler bit keeps its carbide edge longer. Applications Drilling reinforced concrete, concrete, natural stone and masonry - anchors, plugs, chemical anchors, suspended ceilings, electrical installations and plumbing runs. The bit is for hammer mode only; drilling concrete without percussion simply wears the carbide away to no purpose.Technical specifications BrandBosch Professional RangeEXPERT SDS plus-7X Part number2 608 900 073 EAN4059952531465 TypeHammer drill bit Diameter6 mm Working length150 mm Total length215 mm ShankSDS plus HeadFull carbide, 4 cutters Service lifeUp to 3x longer than Bosch SDS plus-3 CompatibilityAll rotary hammers with an SDS plus chuck Pack quantity1 pc PackagingPlastic packaging, hanger, with Euro hole Questions and Answers What is the difference between working and total length? The working length (150 mm) is the fluted part that enters the hole - the maximum depth the bit can reach. The total length (215 mm) also includes the SDS plus shank that sits in the chuck. Which machines does this bit fit? Every rotary hammer with an SDS plus chuck, including machines from other brands. SDS plus is an open mounting standard - the bit is pushed in and locks without a key. Why does the head have four cutters? A two-cutter bit jams on rebar and breaks. The full carbide head of the 7X is one solid piece with four edges - it punches through the steel with no need to stop or change bits. How much longer does it last than an ordinary bit? Bosch states up to 3x the service life of the Bosch SDS plus-3 drill bit. The comparison is the manufacturer's and refers to drilling reinforced concrete. Can it be used without hammer action? Not in concrete. The bit is designed for hammer mode - percussion breaks the material and the rotation only clears the dust. Without percussion the carbide wears away quickly and to no effect. Is it suitable for metal, tiles or wood? No. This is a bit for reinforced concrete, concrete, natural stone and masonry. Metal, tiles and wood need bits with a different geometry and a different cutting material. How is the diameter chosen for an anchor? The bit diameter must match the one specified by the fastener manufacturer for that anchor. Clean the dust out of the hole before setting - with chemical anchors that is a condition for the rated load. ..

Bosch EXPERT SDS plus-7X Hammer Drill Bit 6 x 200 x 265 mm, 2 608 900 074 The Bosch EXPERT SDS plus-7X 2 608 900 074 has a diameter of 6 mm, a working length of 200 mm and a total length of 265 mm. The shank is SDS plus, so it fits every rotary hammer with that chuck, whatever the make of the machine. Full carbide head with four cutters The head of the 7X range is made from a single piece of carbide - not two brazed plates, but one solid part - and it has four cutting edges instead of the usual two. That matters in reinforced concrete: a two-cutter bit jams when it hits rebar and eventually breaks, while the four edges of the solid head punch through the steel with no need to stop, re-target or change bits. Service life Bosch states up to 3x longer life than the Bosch SDS plus-3 drill bit. Two things are behind that: the carbide itself, made with Bosch Carbide Technology, and the special welding process that joins the head to the body - the point at which a hammer drill bit most often fails under load. Flute and dust removal The body carries a helical flute that clears dust out of the hole. Withdrawing the bit periodically on deep holes helps the flute do its job, and a cooler bit keeps its carbide edge longer. Applications Drilling reinforced concrete, concrete, natural stone and masonry - anchors, plugs, chemical anchors, suspended ceilings, electrical installations and plumbing runs. The bit is for hammer mode only; drilling concrete without percussion simply wears the carbide away to no purpose.Technical specifications BrandBosch Professional RangeEXPERT SDS plus-7X Part number2 608 900 074 EAN4059952531472 TypeHammer drill bit Diameter6 mm Working length200 mm Total length265 mm ShankSDS plus HeadFull carbide, 4 cutters Service lifeUp to 3x longer than Bosch SDS plus-3 CompatibilityAll rotary hammers with an SDS plus chuck Pack quantity1 pc PackagingPlastic packaging, hanger, with Euro hole Questions and Answers What is the difference between working and total length? The working length (200 mm) is the fluted part that enters the hole - the maximum depth the bit can reach. The total length (265 mm) also includes the SDS plus shank that sits in the chuck. Which machines does this bit fit? Every rotary hammer with an SDS plus chuck, including machines from other brands. SDS plus is an open mounting standard - the bit is pushed in and locks without a key. Why does the head have four cutters? A two-cutter bit jams on rebar and breaks. The full carbide head of the 7X is one solid piece with four edges - it punches through the steel with no need to stop or change bits. How much longer does it last than an ordinary bit? Bosch states up to 3x the service life of the Bosch SDS plus-3 drill bit. The comparison is the manufacturer's and refers to drilling reinforced concrete. Can it be used without hammer action? Not in concrete. The bit is designed for hammer mode - percussion breaks the material and the rotation only clears the dust. Without percussion the carbide wears away quickly and to no effect. Is it suitable for metal, tiles or wood? No. This is a bit for reinforced concrete, concrete, natural stone and masonry. Metal, tiles and wood need bits with a different geometry and a different cutting material. How is the diameter chosen for an anchor? The bit diameter must match the one specified by the fastener manufacturer for that anchor. Clean the dust out of the hole before setting - with chemical anchors that is a condition for the rated load. ..

Hawera Multi Construction Drill Bit Ø6 x 90 x 150 mmDescriptionThe Hawera Multi Construction 202058 is a universal drill bit measuring Ø6 x 90 x 150 mm, designed for drilling a wide range of construction materials with a single bit. It is suitable for concrete, brick, masonry, ceramic, tiles, wood, plastic, steel, and aluminum. The drill bit features a diamond-ground tungsten carbide tip for precise centering, fast drilling, and excellent durability. Its cylindrical shank makes it compatible with standard drills and drill drivers, while the extended working length is ideal for deeper and more demanding drilling applications.Technical Specifications Brand: Hawera Series: Multi Construction Type: Universal drill bit Diameter: 6 mm Working length: 90 mm Overall length: 150 mm Shank: Cylindrical Tip: Tungsten carbide (TCT) Application: Concrete, brick, masonry, ceramic, tiles, wood, plastic, steel, and aluminum Package Includes 1 pc. Hawera Multi Construction Drill Bit Ø6 × 90 × 150 mm..

Drilling into steel-reinforced concrete is no longer a problem with the Nemesis series of SDS-plus shank drill bits; there is no risk of the cutting edge breaking, and drilling is a breeze. A top-quality drill bit for anyone who needs to make a hole in reinforced concrete or natural stone. Manufacturer: Makita Outer diameter: 12.00 mm Type: for concrete and reinforced concrete Shank type: SDS-plus Working length, mm: 150.00 mm Length, mm: 210.00 mm Brand: Makita Material: HM Model: Nemesis Weight: 0.00 kg Item type: Drill bit..

Makita E-11829 Bits and Drill Bits - 60 pcsFeatures: The Makita bit and drill bit set is an extremely convenient set containing all the essential tools a professional needs to get the job done right. They are distinguished by their durability and high quality. They are made of high-grade steel for a longer service life. The set includes a bit holder, straight and Phillips bits, Torx bits, drill bits, adapters, and more. The convenient plastic case makes it easy to store and transport the set to your worksite. The set includes:H3, H4, H5, H6,Phillips: PH0-PH1-PH2-PH3Phillips: PZ0-2xPZ1-6xPZ2-2xPZ3Torx: T15, T20Straight: 0.5x3.0, SL0.8x5.0, 2xSL1.2x5.5, SL1.0x6.0, 3xSL1.2x6.5, SL1.2x7.0Magnetic extensionConcrete drill bits: 5mm x 85mm, 5.5mm x 85mm, 6mm x 100mm, 7mm x 100mm, 8mm x 120mm.Wood drill bits: 4, 5, 6, 7, 8 mm1/4" sockets: 5/6/7/8/9/10/11 mmBit holder1/4" adapterStorage case..

Makita D-00016 Concrete Drill BitDescription: The Makita D-00016 concrete drill bit is a high-quality drill bit that combines innovative head geometry with two carbide cutting teeth and uncompromising quality. It is ideal for drilling masonry, concrete, and natural stone, thanks to its precision-drilled holes, which reduce stress on the tool and extend its life. Its centering tip helps guide it easily into the hole and offers good value for money. With a 110 mm shank for perfect results and comfort during use. Technical specifications:Model: D-00016Materials: masonry, concrete, and natural stoneCutting head type: 2 carbide cutting teethLength: 110 mmWorking length: 50 mmDiameter: 4 mmShank: SDS-PlusMaterial: tungsten carbideCutting edges: 2Standard: DIN 8039Quantity per package: 1 pc..

Makita D-00022 Concrete Drill BitDescription: The Makita D-00022 concrete drill bit is a high-quality drill bit that combines innovative head geometry with two carbide cutting teeth and uncompromising quality. It is ideal for drilling masonry, concrete, and natural stone, thanks to its precision-drilled holes, which reduce stress on the tool and extend its life. Its centering tip helps guide it easily into the hole and offers good value for money. With a 110 mm shank for perfect results and comfort during use. Technical specifications:Model: D-00022Materials: masonry, concrete, and natural stoneCutting head type: 2 carbide cutting teethLength: 110 mmWorking length: 50 mmDiameter: 5 mmShank: SDS-PlusMaterial: tungsten carbideCutting edges: 2Standard: DIN 8039Quantity per package: 1 pc..

Makita D-00050 Concrete Drill BitDescription: The Makita D-00050 concrete drill bit is a high-quality drill bit that combines innovative head geometry with two carbide cutting teeth and uncompromising quality. It is ideal for drilling into masonry, concrete, and natural stone, thanks to its precision-drilled holes, which reduce stress on the tool and extend its service life. Its centering tip helps guide it easily into the hole and offers good value for money. With a 110 mm shank for perfect results and comfort during use. Technical specifications:Model: D-00050Materials: masonry, concrete, and natural stoneCutting head type: 2 carbide cutting teethLength: 110 mmWorking length: 50 mmDiameter: 6 mmShank: SDS-PlusMaterial: tungsten carbideCutting edges: 2Standard: DIN 8039Quantity per package: 1 pc..

Makita D-00066 Concrete Drill BitDescription: The Makita D-00066 concrete drill bit is a high-quality drill bit that combines innovative head geometry with two carbide cutting teeth and uncompromising quality. It is ideal for drilling masonry, concrete, and natural stone, thanks to its precision-drilled holes, which reduce stress on the tool and extend its life. Its centering tip helps guide it easily into the hole and offers good value for money. With a 160 mm body for perfect results and comfort during use. Technical specifications:Model: D-00066Materials: masonry, concrete, and natural stoneCutting head type: 2 carbide cutting teethLength: 160 mmWorking length: 100 mmDiameter: 6 mmShank: SDS-PlusMaterial: Tungsten carbideCutting edges: 2Standard: DIN 8039Quantity per package: 1 pc..

Makita D-00072 Concrete Drill BitDescription: The Makita D-00072 concrete drill bit is a high-quality drill bit that combines innovative head geometry with two carbide cutting teeth and uncompromising quality. It is ideal for drilling masonry, concrete, and natural stone, thanks to its precision-drilled holes, which reduce stress on the tool and extend its life. Its centering tip helps guide it easily into the hole and offers good value for money. With a 210 mm shank for perfect results and comfort during use. Technical specifications:Model: D-00072Materials: masonry, concrete, and natural stoneCutting head type: 2 carbide cutting teethLength: 210 mmWorking length: 150 mmDiameter: 6 mmShank: SDS-PlusMaterial: Tungsten carbideCutting edges: 2Standard: DIN 8039Quantity per package: 1 pc..

Makita D-00088 Concrete Drill BitDescription: The Makita D-00088 concrete drill bit is a high-quality drill bit that combines innovative head geometry with two carbide cutting teeth and uncompromising quality. It is ideal for drilling masonry, concrete, and natural stone, thanks to its precision-drilled holes, which reduce stress on the tool and extend its life. Its centering tip helps guide it easily into the hole and offers good value for money. With a 110 mm shank for perfect results and comfort during use. Technical specifications:Model: D-00088Materials: masonry, concrete, and natural stoneCutting head type: 2 carbide cutting teethLength: 110 mmWorking length: 50 mmDiameter: 6.5 mmShank: SDS-PlusMaterial: tungsten carbideCutting edges: 2Standard: DIN 8039Quantity per package: 1 pc..

Makita D-00094 Concrete Drill BitDescription: The Makita D-00094 concrete drill bit is a high-quality drill bit that combines innovative head geometry with two carbide cutting teeth and uncompromising quality. It is ideal for drilling masonry, concrete, and natural stone, thanks to its precision-drilled holes, which reduce stress on the tool and extend its life. Its centering tip helps guide it easily into the hole and offers good value for money. With a 160 mm body for perfect results and comfort during use. Technical specifications:Model: D-00094Materials: masonry, concrete, and natural stoneCutting head type: 2 carbide cutting teethLength: 160 mmWorking length: 100 mmDiameter: 6.5 mmChuck: SDS-PlusMaterial: tungsten carbideCutting edges: 2Standard: DIN 8039Quantity per package: 1 pc..