RYOBI R18CK2G-1C20G 18V ONE+ Cordless Combo Kit, Drill Driver and Multi-Tool - 5133006824

RYOBI R18CK2G-1C20G 18V ONE+ Cordless Combo Kit - Drill Driver and Multi-Tool

The RYOBI R18CK2G-1C20G brings two cordless machines from the ONE+ 18 V system together in one pack: the R18DD3 drill driver and the RMT18 oscillating multi-tool. Unlike the "-0" and SOLO versions, which ship as a bare tool, this article includes the battery and the charger - one 2.0 Ah Lithium+ battery (RB1820C) and an RC18115 charger. The manufacturer's article number is 5133006824 and the EAN is 4892210254160.

The two machines complement each other: the drill bores and drives, while the multi-tool cuts, trims and sands where a circular saw or a random orbit sander cannot reach. The pairing is put together for home renovation and fit-out, for installation work and for small finishing jobs.

RYOBI R18DD3 drill driver

The gearbox is a two-speed unit running at 0-500 and 0-1800 min^-1. The low gear supplies the torque for long screws and large-diameter bits, the high gear is for drilling quickly in timber and metal. Maximum torque is 50 Nm and the clutch offers 24 settings, so a screw head stops flush with the surface instead of sinking into the material. The chuck is a 13 mm keyless ratcheting type that grips a bit more firmly. Maximum drilling capacity is 38 mm in wood and 13 mm in steel. The tool weighs 1.3 kg without a battery and 1.7 kg with the battery supplied in this kit. An LED work light is built in.

RYOBI RMT18 multi-tool

The RMT18 oscillates at 10,000 - 20,000 min^-1 through a 3° angle. That movement allows plunge cutting in the middle of a panel, trimming skirting boards and door casings in place, cutting openings, removing old grout and silicone, and fine sanding into corners and tight spots. Accessory mounting is universal (Universal Attachment Mounting), so blades and pads from other brands fit - which matters, because these consumables are replaced often. Speed is variable, with a lock-on switch and an LED work light. Weight is 0.76 kg without a battery and 1.4 kg with the battery from this kit. The official photograph of this article shows a plunge-cut blade, a segment (half-round) blade, a triangular sanding pad and sanding sheets; RYOBI publishes no list of included accessories, so they are not claimed as part of the kit contents.

Battery and charger - exactly what is included

The box holds one RB1820C battery - 18 V, 2.0 Ah, Lithium+, weighing 0.4 kg, with a four-stage fuel gauge (100, 75, 50 and 25%). IntelliCell technology monitors the individual cells and balances their discharge. RYOBI states that this pack paired with the R18DD3 will drive up to 600 screws of 4x32 mm. The charger is the RC18115 rated at 1.5 A. Two points are worth knowing before you order: the battery is one, not two, and the kit arrives in a cardboard box - with no bag and no case.

The ONE+ 18 V platform

Both machines belong to ONE+ 18 V, the RYOBI system in which one and the same battery powers the entire range. Any ONE+ 18 V battery fits any ONE+ machine regardless of the year it was made, which is why so many of these tools are also sold bare. If you already own larger 4.0 or 5.0 Ah packs, those will equally drive these two tools and give longer run times.

Applications

The kit covers the usual household and installation tasks: assembling furniture, hanging cabinets and shelves, drilling in timber, plasterboard, plastic and thin metal. The multi-tool trims skirting and door casings in place, cuts openings for switches and sockets, strips out old grout and silicone, and sands corners when preparing a surface for paint.

Technical specifications of the machines

Kit data

What's in the Box

• 1 x RYOBI R18DD3 drill driver, 18 V ONE+
• 1 x RYOBI RMT18 oscillating multi-tool, 18 V ONE+
• 1 x RYOBI RB1820C ONE+ battery, 18 V, 2.0 Ah, Lithium+
• 1 x RYOBI RC18115 charger, 18 V, 1.5 A
• Packaging: cardboard box. No bag and no case are included.

Questions and Answers