Angle drill for working in tight and har..
Woodworking machines for precise and cle..
Metal circular saw for clean and control..
Tile saw - precise cuts for tiling proje..
Dremel for precision work, repairs, and ..
Electric jigsaw for precise and controll..
Electric hydraulic pump for heavy-duty h..
Electric jigsaw - precise and versatile ..
Electric knife sharpeners for fast and p..
Electric brick saw - precise cutting of ..
Electric impact wrenches for quickly loo..
Drill for precision drilling, installati..
Grinder for working with metal, wood, st..
Plunge-cut circular saw for clean, preci..
Lathes for precision machining in worksh..
Chain sharpening machines for precise ma..
Jigsaws for precise cross-cuts and miter..
Pipe connectors for installing plastic p..
Welding rods for repair, installation, a..
Soldering iron for precision soldering, ..
Vacuum Cleaner for a Clean Work Environm..
Electric screwdrivers and impact wrenche..
Electric hot air gun for repairs, instal..
Welding EquipmentPrecision and reliabili..
Electric Drills - Power, Precision, and ..
Corded multi-tools - versatility and pow..
Demolition HammerA powerful tool for eff..
Mixers for mixtures - efficiency and pre..
Mixer-Agitator for Paints and Solutions ..
Bench DrillPower and Precision for Every..
Hammer Drill - A Powerful Tool for Const..
Polishing and Grinding Machines - Perfec..
Cleaning Equipment - Efficiency, Conveni..
Sabre SawEfficiency and Precision for Ev..
Polishing machines for fine finishing, r..
Brand: Makita
Stock: In Stock
SDS-Plus HR2470 Hammer Drill - Dust-protected chuck with SDS-Plus shank. Identical torque in both directions of rotation. The zigzag coating on the rotor and the new hammer mechanism allow for operation under heavy-duty conditions. Drilling, hammer drilling, or chiseling. A torque limiter protects the operator and the machine from accidental kickback. 4 chisel orientation positions. Electronic trigger with lock for continuous operation. Rubberized handle.
Warranty - 3 years after registration on the Makita website
Model: HR2470
Weight: 2.9 kg
D*max in concrete, f: 24/65 mm
Impact force (J): 2.4 J
Chiseling: Yes
Supply voltage: 230 V
No-load speed*: 1100 rpm
Chuck: SDS plus
Power, in watts*: 780 W
Impact rate: 4550 min-1..
-23%
148.00€ 192.76€
Ex Tax:123.33€
Brand: Makita
Stock: In Stock
Makita HM1317C Electric Hammer DrillDescription:
The Makita HM1317C hammer drill is designed for heavy-duty tasks and continuous operation. Thanks to Anti-Vibration Technology (AVT)
, the tool significantly reduces strain on the hands and ensures greater comfort even during intensive use. The special idle speed reduction
feature eliminates excessive vibrations and improves striking precision. The model features anergonomic handle with a soft rubber grip
that ensures a stable grip and excellent control. The soft-start system
allows for a smooth start-up without excessive torque, while electronic speed control
maintains constant power during operation. Additional benefits include indicators for brush replacement and electrical issues
, as well as long-lasting carbon brushes
that extend the machine's lifespan. The 360° rotating side handle
provides complete flexibility, and the hexagonal chuck
ensures quick and secure bit changes. The Makita HM1317C
is the ideal choice for professionals seeking high performance, durability, and comfort when chiseling concrete, stone, and masonry.Technical Specifications:Power: 1510 WBlows per minute: 730 - 1450 min-1Chuck type: B-Type / HexagonalChuck size: 30 mmImpact energy: 25 JNoise (sound pressure): 81 dB(A)Noise (sound power): 101 dB(A)Noise (variance): 2.4 dB(A)Vibration during chiseling: 8.5 m/s2Vibration (K-weighted): 1.5 m/s2Dimensions (L x W x H): 715 x 129 x 266 mmWeight: 17 kg..
-8%
1,196.42€ 1,299.70€
Ex Tax:997.02€
Brand: Makita
Stock: In Stock
FEATURES:
Powerful 680 W motor
Drilling, hammer drilling, or screwdriving
Aluminum gear housing and cylindrical motor housing designed for heavy-duty use
Reverse function with electronic control and lock for continuous operation
Included: chuck key, cardboard packaging
Makita HP1640 Electronic Hammer Drill, 680 W
Technical Specifications:
Warranty: 3 years
Power: 680 W
No-load speed: 0 - 3,200 rpm
Impact rate: 0-48,000 impacts/min
Drilling capacity in steel/concrete/wood: Ø 13/16/30 mm
Chuck opening: 1.5-13 mm
Weight: 1.9 kg
Check out more Makita tools
!..
-22%
79.00€ 100.72€
Ex Tax:65.83€
Brand: Makita
Stock: In Stock
This Makita HS7601 circular saw features an ergonomically molded auxiliary handle. It has a powerful 1,200-watt motor and a sturdy base plate with a stable cutting depth adjustment mechanism. It can be connected to an external dust extraction system. Noise level: only 86 dB. Includes a carbide circular blade.
Manufacturer: Makita
Warranty: 3 yearsPower: 1200 WNo-load speed: 5200Circular blade: 190/30 mmCutting capacity (0°): 66 mmDimensions (L x W x H): 309x232x255 mmWeight: 4.0 kgStandard accessories:parallel guidedust extractor..
-21%
145.00€ 184.58€
Ex Tax:120.83€
Brand: Makita
Stock: In Stock
Makita MLT100N Table Saw, 1500 W, Ø 260 mm
The Makita MLT100N is a table saw for professional woodworking, rated at 1500 W and taking a 260 mm blade. It is built for accurate ripping and cross-cutting of boards, panels and battens on site or in the workshop, wherever a stable work surface and repeatable accuracy matter.
Power and cutting capacity
The motor runs at 4300 rpm under no load and keeps the blade turning evenly even in dense material. Maximum cutting height is 93 mm at 90° and 64 mm at a 45° bevel, which covers timber of structural thickness. The blade tilts smoothly through 0 - 45° to the left.
Table and guides
The table measures 610 x 620 mm and extends with sliding extensions to take wider panels. Height adjusts between 310 and 560 mm, so the machine can be matched to the operator or to adjacent work surfaces. The rip fence and mitre gauge lock firmly and allow batches to be cut to an identical size.
Accuracy in batch work
The rip fence runs along a graduated scale and clamps at both ends, which holds the set dimension across repeated cuts. The mitre gauge handles angled cross-cuts, and the two together are enough to produce identical parts without additional jigs. If the machine is in daily use, it is worth checking the blade's squareness to the table periodically.
Safety and dust extraction
The saw comes with a blade guard, a riving knife and a dust port for connecting a vacuum. Standard equipment includes a push stick, a blade wrench, a triangular rule and a hex wrench. At around 35 kg the saw stays portable while sitting firmly enough not to shift during a cut.
Who it is for
The MLT100N suits joinery workshops, furniture makers, building crews and installers of windows and flooring who need an accurate bench machine but have no room for a stationary panel saw.
Technical specifications
Input power1500 W
No load speed4300 rpm
Blade diameter260 mm
Bore30 mm
Max cutting height at 90°93 mm
Max cutting height at 45°64 mm
Bevel range0 - 45° left
Table size610 x 620 mm
Table height adjustment310 - 560 mm
Dimensions (L x W x H)726 x 984 x 473 mm
Weight34.8 - 35.1 kg
Cord length2.5 m
Sound pressure level89 dB(A)
Sound power level100 dB(A)
Standard equipment
Push stick
Blade wrench
Triangular rule
Hex wrench
Questions and Answers
What is the maximum material thickness the MLT100N can cut?
With the blade vertical at 90° the saw cuts to a depth of 93 mm. At a 45° bevel the maximum height drops to 64 mm. These figures apply with a genuine 260 mm blade fitted and its teeth sharp.
What blade does this saw take?
A blade with a 260 mm outer diameter and a 30 mm bore. The tooth count depends on the job - fewer teeth rip solid timber faster, while a higher count gives a cleaner edge in panels and laminated materials.
Can a vacuum be connected?
Yes, the machine has a dust port that takes a dry vacuum extractor. Extraction matters especially when cutting panels and MDF, because that dust is fine and spreads quickly in an enclosed space.
How does it differ from the earlier MLT100?
The MLT100N is the updated version of the MLT100 and keeps the main figures - 1500 W, a 260 mm blade and 93 mm of cutting height. Both models sit in the same class, so consumables with a 260 mm diameter and 30 mm bore are shared.
Does the machine come with a stand?
No. The MLT100N version ships without a stand - the box contains a push stick, blade wrench, triangular rule and hex wrench. Makita offers a separate version with a mounting stand, designated MLT100NX1.
How heavy is it and is it easy to move?
It weighs around 35 kg without the cable. That is enough to stand firm during a cut, yet light enough for two people to move between sites. For regular relocation a suitable stand or trolley is recommended.
Can the table be extended for wider panels?
Yes. The main table is 610 x 620 mm and has sliding extensions that take wider stock. Table height also adjusts between 310 and 560 mm, which helps when working with long pieces supported on an adjacent surface.
..
-27%
735.00€ 1,012.36€
Ex Tax:612.50€
Brand: Makita
Stock: In Stock
Makita MT M1902B Electric Planer, 500 W, 82 mm
The M1902B is a corded planer rated at 500 W, with a planing width of 82 mm and 16,000 min-1. Maximum depth of cut in one pass is 1 mm, and rebate depth 9 mm. It weighs 2.7 kg.
What the MT range is
MT is Makita's line for everyday work - more plainly built than the main range, but from the same factory and with the same service network.
Depth and rebate
One millimetre per pass is normal for a planer of this class - material comes off over several passes, not at once. A rebate up to 9 mm deep is made with the side fence, and the V-groove in the base plate lets an edge be chamfered without relying on the eye.
Dust extraction
The spigot is 45/50 mm inside/outside diameter. A planer makes coarse shavings that block sooner than fine dust - the wider outlet helps.
Applications
Levelling timber surfaces, fitting doors and windows, cutting rebates and grooves, chamfering edges, preparing beams and battens before assembly.
Noise and vibration
84 - 87 dB(A) sound pressure depending on the national site, and 95 dB(A) sound power at K = 3 dB(A). Vibration planing softwood is 3.0 m/s² at K = 1.5.
What is in the delivery
1 x Makita M1902B planer with blades fitted
1 x parallel fence (165581-2)
1 x blade setting gauge (456751-7)
1 x 5 mm hex key (783217-7)
A corded machine - no battery or charger. No case is stated by the manufacturer.
Technical specifications
Article numberM1902B
RangeMakita MT
EAN0088381823616
Power500 W
Planing width82 mm
Max. depth of cut1 mm
Max. rebate depth9 mm
No load speed16,000 min-1
V-groove in baseyes
Dust spigot45 / 50 mm
Double insulationyes
Dimensions285 x 157 x 160 mm
Weight2.7 kg
Cable length2.0 m
Sound pressure84 - 87 dB(A), K = 3 dB(A)
Sound power95 dB(A), K = 3 dB(A)
Vibration (softwood)3.0 m/s², K = 1.5 m/s²
Questions and Answers
What is the planing width?
82 mm - the standard width for a hand planer. It covers an ordinary board or a door edge in one pass.
How much does it remove per pass?
Up to 1 mm. No more at once - material comes off over several passes, which also gives a smoother surface.
Can it cut rebates?
Yes, up to 9 mm deep, with the side fence. The parallel fence is supplied.
What is the V-groove for?
The base plate has a V-groove that catches the edge of the workpiece when chamfering. The chamfer then comes out even along its whole length without guiding by eye.
Does it have dust extraction?
Yes, a 45/50 mm spigot. A planer makes coarse shavings, so the outlet is wider than on a sander.
Can the blades be changed?
Yes. A blade setting gauge and a 5 mm hex key are supplied - both are needed when changing, so the blades sit at the same height.
Is a case included?
None is stated on any official Makita site. The predecessor M1902 is described as supplied in a box.
..
115.00€
Ex Tax:95.83€
Brand: Makita
Stock: In Stock
FEATURES:
A quick-release lever makes it easy to adjust the cutting depth
The trigger is integrated into the handle
More efficient ventilation compared to previous models
Can be connected to an external dust extraction system
Makita Maktec MT361 Router, 900W, 6mm
Technical specifications:
Warranty: 3 years
Power: 900 W
No-load speed: 27,000 rpm
Routing depth: 0-35 mm
Collet diameter: 8 mm
Weight: 2.7 kg
Dimensions (L x W x H): 256 x 110 x 217 mm..
-26%
103.79€ 141.12€
Ex Tax:86.49€
Brand: Makita
Stock: In Stock
Makita MT M3601B Plunge Router, 900 W, 35 mm plunge
The M3601B is a plunge router rated at 900 W and 27,000 min-1. It takes cutters with 6 and 8 mm shanks, and maximum plunge depth is 35 mm. It weighs 2.7 kg.
What the MT range is
MT is Makita's line for everyday work - fewer features than the main range, but the same factory and the same service network. The machines are corded and plainly built, aimed at tradespeople who want a dependable tool without paying for electronics they will not use.
Depth setting
Depth is set by a three-step turret stop with a scale. The three steps let the same groove be cut in several passes without resetting each time - the first pass removes the bulk, the last forms the wall.
Base and guidance
The sliding base is 110 x 145 mm, with a 68 mm opening for a guide bush. A parallel guide is supplied, and with an additional adapter the machine runs on a guide rail. A dust extraction adapter connects to a vacuum.
Applications
Grooves and rebates in solid timber and panels, edge profiling, housings for hinges and locks, template work with a guide bush, circles and arcs with the parallel guide, and inverted mounting in a table.
Noise and vibration
Makita gives 89-91 dB(A) sound pressure and 100-102 dB(A) sound power at K = 3 dB(A) - the figures differ between national sites. Vibration routing MDF is 7.9 m/s² at K = 1.5.
What is in the delivery
1 x Makita M3601B router
1 x parallel guide (164834-6)
1 x dust extraction adapter (194733-8)
1 x 8 mm collet (763618-5)
1 x straight bit set (191Y83-2)
1 x 13 mm and 1 x 22 mm spanner
A corded machine - no battery or charger. No case is stated by the manufacturer.
Technical specifications
Article numberM3601B
RangeMakita MT
EAN0088381822091
Power900 W
Voltage230 V
No load speed27,000 min-1
Collets6 and 8 mm
Collet supplied8 mm (763618-5)
Plunge depth0 - 35 mm
Depth stop3-step turret with scale
Base110 x 145 mm
Guide bush opening68 mm
Dust extractionyes, with adapter
Dimensions256 x 110 x 218 mm
Weight2.7 kg
Cable length2.0 m
Sound pressure89 - 91 dB(A), K = 3 dB(A)
Sound power100 - 102 dB(A), K = 3 dB(A)
Vibration (MDF)7.9 m/s², K = 1.5 m/s²
Questions and Answers
What cutters does it take?
Shanks of 6 and 8 mm. The 8 mm collet is supplied; the 6 mm one is bought separately if needed. Check your cutter shank before ordering.
What is the maximum depth?
35 mm in one plunge. The three-step turret stop lets that depth be reached over several passes rather than at once - the cutter is loaded less and the edge comes out cleaner.
Is the speed variable?
No. The machine runs at a fixed 27,000 rpm. Some Makita national sites print "0 - 27000", suggesting control, but the model has no electronic speed control - speed depends only on the trigger.
Can it run on a guide rail?
Yes, with an additional adapter which is not supplied. Without a rail the included parallel guide is used.
Does it have dust extraction?
Yes. The extraction adapter (194733-8) is supplied and connects to a vacuum. Routing MDF that matters - the dust is fine and easily inhaled.
What is in the box?
A parallel guide, a dust extraction adapter, an 8 mm collet, a straight bit set and two spanners. No case is stated by the manufacturer.
What is the MT range?
Makita's line for everyday work - more plainly built than the main range, but from the same factory and with the same service network.
..
-7%
112.00€ 120.00€
Ex Tax:93.33€
Brand: Makita
Stock: In Stock
Makita MT M6002B Drill Driver, 420 W
The M6002B is a corded drill driver rated at 420 W, running at 0 - 3,000 min-1, with a 1.5 - 10 mm keyless chuck. It weighs just 1.3 kg at 234 mm long.
What the MT range is
MT is Makita's line for everyday work - fewer features than the main range, but the same factory and the same service network. The machines are corded and plainly built, aimed at tradespeople who want a dependable tool without paying for electronics they will not use.
No hammer action
This is a drill without percussion. It drills wood, metal and plastic and drives screws, but it will not drill concrete or masonry. For a hole in a wall you need a percussion drill or a rotary hammer.
Weight and speed
At 1.3 kg the machine can be held one-handed for a long time - the difference shows overhead or over a long run of holes. Speed is controlled from the trigger to 3,000 rpm, which is high for this class and suits small bits in metal.
Applications
Furniture assembly, drywall, electrical installation, workshop and home repair - wherever wood, sheet metal and plastic are drilled and screws are driven.
Noise
Stated figures are 77 dB(A) sound pressure and 96 dB(A) sound power at K = 3 dB(A).
What is in the delivery
1 x Makita M6002B drill driver
A corded machine - no battery or charger. Makita does not publish a standard equipment list for this article, so a case is not confirmed.
Technical specifications
Article numberM6002B
RangeMakita MT
Power420 W
No load speed0 - 3,000 min-1
Chuck1.5 - 10 mm, keyless
Hammer actionnone
Dimensions234 x 64 x 175 mm
Weight1.3 kg
Power supplymains, corded
Sound pressure77 dB(A), K = 3 dB(A)
Sound power96 dB(A), K = 3 dB(A)
Questions and Answers
What is the power rating?
420 W per Makita's official data. Listings quoting 450 W exist - that does not match the manufacturer's figures, confirmed on two national sites.
Will it drill concrete?
No. The machine has no hammer action - it drills wood, metal and plastic. For concrete and masonry you need a percussion drill or a rotary hammer.
What chuck does it have?
A keyless chuck for bits from 1.5 to 10 mm. It changes without a key.
How much does it weigh?
1.3 kg. That is among the lighter corded drills and matters over long runs or overhead.
Is the speed variable?
Yes, from the trigger - smoothly from 0 to 3,000 rpm. Low speed is for starting and driving, high for small bits in metal.
Does it have reverse?
The manufacturer does not state it explicitly in the table. The machine is listed as a drill driver, so it is used for driving - undoing needs reverse. Check with us before ordering if that is decisive for you.
Is a case included?
Makita does not publish a standard equipment list for this article, so a case is not confirmed.
..
-34%
41.00€ 62.00€
Ex Tax:34.17€
Brand: Makita
Stock: In Stock
Makita MT M9001B Angle Grinder, 2000 W, 230 mm
The M9001B is a large corded angle grinder for 230 mm discs, rated at 2000 W and 6,600 min-1. The spindle is M14 x 2 and the weight 5.7 kg.
What the MT range is
MT is Makita's line for everyday work - more plainly built than the main range, but from the same factory and with the same service network. The machines are corded, aimed at tradespeople who want a dependable tool without electronics they will not use.
Trigger switch with safety lever
The machine starts from a trigger in the handle rather than a slide switch. Releasing the trigger stops it - with a 230 mm disc that is the preferred way to control the tool. The safety lever prevents an accidental start if the machine is picked up by the handle.
Durability
Makita cites reinforced gears for longer life and improved protection against dust and moisture for heavy conditions. The handle has a soft rubber covering, and the gear head rotates so the side handle can be moved to suit the job.
What it takes
230 mm discs with a 22.23 mm bore, a wire cup brush up to 100 mm and a sanding disc up to 180 mm. The large disc gives a cutting depth a 125 mm machine cannot reach - through a section, a brick or a concrete slab in one pass.
Applications
Cutting metal, sections, reinforcement and stainless steel; cutting concrete, stone and brick with a diamond disc; heavy grinding and dressing welds; removing rust and scale with a wire brush.
Noise
Stated figures are 90 dB(A) sound pressure and 101 dB(A) sound power at K = 3 dB(A). Hearing protection is mandatory.
What is in the delivery
1 x Makita M9001B angle grinder
1 x 230 mm wheel guard (122892-8)
1 x side handle (152539-0)
1 x lock nut wrench 35 (782034-2)
Flange set
A corded machine - no battery or charger. No case and no disc.
Technical specifications
Article numberM9001B
RangeMakita MT
Power2000 W
Voltage230 V
Disc diameter230 mm
Disc bore22.23 mm
No load speed6,600 min-1
Spindle threadM14 x 2
Max. wire cup brush100 mm
Max. sanding disc180 mm
Switch typetrigger, with safety lever
Dimensions466 x 250 x 138 mm
Weight5.7 kg
Cable length2.0 m
Sound pressure90 dB(A), K = 3 dB(A)
Sound power101 dB(A), K = 3 dB(A)
Carbon brushes204
Questions and Answers
What discs does it take?
230 mm with a 22.23 mm bore. Also a wire cup brush up to 100 mm and a sanding disc up to 180 mm. 125 mm discs do not fit the guard.
How does it differ from the M9001 without B?
The M9001B is the current MT range model. The M9001 without the letter is the preceding version - Makita no longer lists it in its catalogue. They are different articles.
Why a trigger switch?
With a large 230 mm disc, releasing the trigger stops the machine at once rather than hunting for a slide switch. The safety lever prevents an accidental start when picking the tool up by the handle.
How much does it weigh?
5.7 kg. This is a two-handed machine - the side handle is mandatory, not optional.
Is the speed variable?
No. It runs at a fixed 6,600 rpm. Some sites print "0 - 6600", but the model has no electronic speed control.
Is a disc included?
No. Supplied are the guard, the side handle, the lock nut wrench and the flanges. The disc is chosen and bought separately to suit the material.
Can it cut concrete?
Yes, with a 230 mm diamond disc. The large diameter gives a cutting depth smaller machines cannot reach.
..
-28%
109.00€ 151.00€
Ex Tax:90.83€
Brand: Makita
Stock: In Stock
Makita MT M9400B Belt Sander, 940 W, 100 x 610 mm belt
The M9400B is a corded belt sander rated at 940 W with a belt speed of 380 m/min. It takes 100 x 610 mm belts - the wide size that removes material quickly over a large area. It weighs 6.2 kg.
What the MT range is
MT is Makita's line for everyday work - more plainly built than the main range, but from the same factory and with the same service network.
What the wide belt is for
A hundred millimetres of width means one belt covers a wide strip on every pass. On a worktop, a door or a floor that is the difference between an hour and three. In exchange the machine is heavy - its weight does part of the pressing for you, but it is not a tool for vertical surfaces overhead.
Dust extraction
A dust bag is included. A belt sander makes a great deal of wood dust and it is easily inhaled - the bag catches the bulk, and for serious work the machine connects to a vacuum.
Continuous running
There is a lock-on button that keeps the machine running without holding the trigger. Over a large area that saves the finger.
Applications
Heavy sanding of large timber surfaces - worktops, boards, doors, floors, furniture parts. Bulk stock removal, stripping old coatings and lacquers, levelling glued-up panels.
Noise and vibration
87 dB(A) sound pressure and 98 dB(A) sound power at K = 3 dB(A). Vibration is up to 2.5 m/s² at K = 1.5 - a low figure for a machine of this class.
What is in the delivery
1 x Makita M9400B belt sander
1 x dust bag set (123328-0)
1 x graphite pad (424057-1)
1 x sanding belt
A corded machine - no battery or charger. No case is stated.
Technical specifications
Article numberM9400B
RangeMakita MT
EAN0088381695855
Power940 W
Voltage230 - 240 V, 50 - 60 Hz
Current4.1 A
Belt speed380 m/min
Belt size100 x 610 mm
Dust extractionyes, with bag
Lock-on buttonyes
Double insulationyes
Dimensions354 x 175 x 169 mm
Weight excl. cable6.2 kg
Cable length2.0 m
Sound pressure87 dB(A), K = 3 dB(A)
Sound power98 dB(A), K = 3 dB(A)
Vibrationup to 2.5 m/s², K = 1.5 m/s²
Questions and Answers
What belts does it take?
100 x 610 mm. That is a standard size available in various grits - coarse removes material, fine smooths.
Is a belt included?
Yes, per the manufacturer a sanding belt is supplied along with the dust bag and the graphite pad.
Is the speed variable?
No. The belt runs at a fixed 380 m/min. Some sites print "0 - 380", but the model has no electronic control - that is the rating plate figure.
How heavy is it and why does that matter?
6.2 kg. On a belt sander the weight does part of the pressing for you and the machine runs more evenly. In exchange it does not suit vertical surfaces or overhead work.
What is the graphite pad?
A graphite strip on the platen over which the sanding belt runs. It reduces friction and heat. It is a consumable and is replaced when worn.
Can it connect to a vacuum?
Yes. The bag catches the bulk of the dust, but for extended work indoors a vacuum is the better solution.
Is there a lock-on button?
Yes. Over a large area it saves the finger.
..
-19%
169.00€ 209.00€
Ex Tax:140.83€
Brand: Makita
Stock: In Stock
Makita SP6000 Portable Plunge Circular Saw. Electronic speed control. Electronic control for constant speed, soft start, and overload protection. Tilt: -1 to 48 degrees. Depth stop for smooth cutting.
Manufacturer: Makita
Power: 1300.00 W
Weight: 4.40 kg
No-load speed*: 2000-5200 rpm
Model: SP6000
Features: Angle cutting capability; Speed control
Blade: 165 mm
Max cutting/bending capacity: 55 mm..
-13%
388.00€ 444.82€
Ex Tax:323.33€
Brand: Makita
Stock: In Stock
Makita UT1400 Electric MixerDescription:
The Makita UT1400 electric end-shaft mixer is an extremely versatile tool designed for mixing various materials such as paints, adhesives, plasters, fillers, resins, and more. It features an M14 chuck and a maximum mixer diameter of 140 mm. The mixer is designed to handle materials weighing up to 50 kg, ensuring effective and uniform mixing of the mixtures. It also features a very sturdy construction that allows it to operate even under heavy-duty conditions, ensuring reliability and durability during use.
Technical specifications:Power: 1300 WNumber of speeds: 1No-load speed: 0 - 900 rpmConnection thread: M14Maximum mixer diameter: 140 mmNoise level: 86 dBWeight: 5.2 kg..
-16%
347.17€ 412.10€
Ex Tax:289.31€
Brand: Milwaukee
Stock: In Stock
Manufacturer:
Milwaukee
Model:
AGV12-125X DEC-SET - 4933448020
3-year warranty after registration
Description:
The powerful 1200 W "PROTECTOR-MOTOR" motor features an epoxy protective coating on the rotor and stator. The AGV12-125X DEC-SET is a professional angle grinder with a dust extraction attachment that allows for easy connection to a vacuum cleaner. The attachment allows for cutting depth adjustment from 5 to 28 mm. The built-in electronic control unit combines several functions-soft start, overload protection, and restart protection in the event of a power outage. The safety clutch protects the user from kickback if the disc jams.
Technical Specifications:
Power: 1200 W
Blade diameter: 125 mm
No-load speed: 11,000 rpm
Maximum cutting depth: 28 mm
Weight: 2.4 kg..
-25%
352.30€ 469.19€
Ex Tax:293.58€
Brand: Milwaukee
Stock: In Stock
Milwaukee 4933383925 Electric PolisherDescription:The Milwaukee AP12 E electric polisher is designed for professional use, delivering a high level of efficiency and precision when polishing. With a powerful 1200-watt motor, this tool ensures fast and efficient polishing, even on larger surfaces. The polisher's special gear ratio provides high spindle torque, ensuring optimal polishing speed for perfect results. The polisher offers variable speed control, allowing you to select the ideal speed depending on the application. The tool's ergonomic design ensures comfort even during prolonged use, while the thermal overload protection contributes to the tool's durability and reliability. The polisher is equipped with a 6-meter cable, which provides sufficient freedom of movement and convenience when working in various work areas. All these features make the Milwaukee AP 12 E an excellent choice for professionals seeking a reliable and effective polishing tool.Technical Specifications:Power: 1200 WDisc diameter: 150 mmNo-load speed: 900-2500 rpmSpindle size: M 14Cord shut-off function: YesVariable speed: YesSound power level: 90 dB(A)Weight: 2.2 kgIncluded:1 x Side handle1 x Polishing pad..
-15%
416.30€ 490.79€
Ex Tax:346.92€
Brand: Milwaukee
Stock: In Stock
Manufacturer:
Milwaukee
Model:
CHS355 - 4933411760
3-year warranty after registration
Description:
2300-watt motor with 3800 rpm for excellent cutting performance. The locking pin keeps the saw closed during transport (no chain required). Quick-release vise adjustment for fast angle adjustment from -45° to +45°. Quick-release clamp for fast blade changes. Locking spindle for quick and easy blade changes.Easy brush replacement thanks to external brush doors. Built-in metal fan for maximum durability and long service life. Stamped steel base with additional reinforcements to prevent deformation.
Technical specifications:
Bore size (mm): 25.4
Cutting capacity for L-shaped profile at 90° and 45° (mm): 130/80
Cutting capacity for square profile at 90° and 45° (mm): 115/80
Rectangular cutting capacity 90° and 45° (mm): 230 x 70/100 x 80
Round profile cutting capacity 90° and 45° (mm): 125/100
No-load speed (rpm): 3800
Power (W): 2300
Weight (kg): 18
Wheel diameter (mm): 355
Sound power level (dB(A)): 107.5
Sound power level uncertainty (dB(A)): 3
Sound pressure level (dB(A)): 94.5
Sound pressure level uncertainty (dB(A)): 3
Vibration level (m/s2): 3.1
Vibration uncertainty (m/s2): 1.5
Standard equipment: Wrench, Allen wrench, 355 cutting disc. Supplied in a box...
373.19€
Ex Tax:310.99€
Brand: Milwaukee
Stock: In Stock
Milwaukee 4933368690 Diamond Core DrillDescription:
The Milwaukee DD 2-160 XE diamond core drill is a professional tool with a powerful motor that delivers consistent high torque for trouble-free operation even under the toughest conditions. The dual protection system combines a mechanical and electronic clutch that work together to ensure maximum operator safety and protect the machine from overload. The gearbox is made entirely of metal, ensuring durability and a long service life even under intensive use. The ergonomic D-shaped main handle and the long side handle with an anti-vibration system (AVS) ensure comfort and precise control during prolonged use. The special M16 FIXTEC adapter allows for quick, tool-free replacement of diamond core bits. The two-speed gearbox allows you to select the appropriate speed based on the material and hole size. The soft-start function ensures a precise start to drilling, while the soft-hammer mode helps for faster and easier cutting through the material. The 4-meter cable provides sufficient freedom of movement without the need for extension cords. The machine is compatible with the FIXTEC Cleanline dust extraction adapter for a clean working environment.
Technical specifications:Power: 1500 WNumber of speeds: 2No-load speed, 1st speed: 0 - 1500 rpmNo-load speed, 2nd speed: 0-3000 rpmNo-load impact rate, 1st speed: 24,000 bpmNo-load impact rate, 2nd speed: 48,000 bpmMaximum drilling diameter in reinforced concrete: - mmMaximum drilling diameter in masonry: 162 mmChuck size: M18 x 2.5Noise level: 100 dBWeight: 4.2 kgIncluded:1 x Side handle1 x Quick-change core bit adapter - M161 x Pilot drill bit, SDS-plus, 8 x 140 mm1 x Cable, 4 m1 x Kitbox carrying casehttps://youtu.be/lr8OIL0ZyLI?si=vnRLALbFSW82xqk7..
-22%
799.00€ 1,018.80€
Ex Tax:665.83€
Brand: Milwaukee
Stock: In Stock
Milwaukee M18 FDDEC-0 Dust CollectorDescription:
The Milwaukee M18 FDDEC-0
dust collector, compatible with the Milwaukee M18 FHAC16
, is designed for effective dust collection during drilling, operating automatically by synchronizing with the tool's on/off cycle. This ensures a clean work environment and better control in professional applications. The model is equipped with a HEPA filter that captures particles of any size with up to 99.75% efficiency, ensuring a high level of filtration and health protection. The large dust collection box allows for extended operation without frequent cleaning, and the aluminum dust extraction tube is adjustable to fit the drill bit size, with a maximum diameter of 16 mm and a drilling depth of up to 100 mm. The dust collector is fully compatible with the Milwaukee M18 FHAC16 hammer drill and is suitable for precise and clean work on construction sites and during renovation projects.
Technical specifications:Air volume: 28 m3/h Air flow: 466 L/minCapacity: 0.31 LFor drill bits with a diameter of: up to 16 mmDrill bit length: up to 165 mmMax. drilling depth: 75 mm..
-27%
96.20€ 131.99€
Ex Tax:80.17€
Brand: Milwaukee
Stock: In Stock
Manufacturer
: Milwaukee
Model:
K 500 S
Warranty:
3 years after registration on the website
Description:
This heavyweight powerhouse delivers a maximum impact energy of 8.5 J. The powerful 1300-watt motor provides maximum power, but thanks to improved heat dissipation, it ensures maximum possible durability. Constant electronics maintain a consistent speed even under load. Soft start for precise chisel engagement. AVS (Anti-Vibration System) and soft-grip front and rear handles. An auxiliary handle can be fixed in 3 different positions. Soft hammer mode reduces impact energy for chiseling in sensitive materials. Multi-position start/stop trigger function. Service indicator. Variolock (12 positions) for selecting the most suitable chisel angle. 6 m cable.
Technical Specifications:
Blow Energy (EPTA) (J): 8.5
Full-load hammering rate (bpm): 2840
Full-load speed (soft hammer) (rpm): 2200
Power (W): 1300
Guaranteed sound power level (dB(A)): 104
Standard equipment: Additional front handle with shovel, grease, pointed chisel
Tool chuck: SDS-Max
Vibration (m/s2): 11.5
Vibration uncertainty during chiseling (m/s2): 1.9
Weight (kg): 6.3
Measured sound power level (dB(A)): 101..
-10%
849.00€ 946.80€
Ex Tax:707.50€
Brand: Milwaukee
Stock: In Stock
Milwaukee K1000S Hammer Drill, SDS-Max, 1750W, 26J, 12.7 kg.
The compact Milwaukee K1000S
hammer drill delivers up to 26 joules of impact energy for a wide variety of applications. Anti-vibration technologies with a floating body allow the user to work all day without reaching dangerous exposure levels. 1,400-1,950 BPM ensures maximum performance in all applications. A 6-meter cord allows for a working area of over 110 m2. Variolock (12 positions) for selecting the most suitable chisel angle. SDS-Max tool compatibility. Service reminder indicator to indicate when maintenance is required. Special window with brush for easy maintenance. BMC with wheels for easy on-site transport.
Technical specifications:Voltage: 220-240 V;Input power: 1750 W;Impact energy: 26 J;Chuck type: SDS-Max;Cable length: 6 m;Impact rate: 1400-1950 BPM;Vibration: 6.7 m/s2;Weight: 12.7 kgThe set includes:Machine: Milwaukee K1000S;IMPACT plastic case: 1 pc...
-28%
1,032.81€ 1,438.80€
Ex Tax:860.68€