Cordless tools - Page 19

DeWALT DCS576N XR Flexvolt Cordless Brushless Circular Saw, 54V, 190 mm The DEWALT DCS576N XR Flexvolt circular saw is ideal for general-purpose cutting, cross-cutting, and miter cuts on wood and other building materials. The high-torque motor provides increased durability and power when cutting building materials and joinery. It features a sturdy block construction for low-vibration operation and a long service life. It includes a scale for precise cutting depth adjustment up to 61 mm and variable bevel angle adjustment up to 57°. Guide rail compatible for quick and easy use with the DEWALT guide rail system. It also has an additional handle for safe two-handed operation. Ships without battery and charger. Technical specifications:Brand: DeWALT;Voltage: 54 V;Battery type: Li-Ion;Battery capacity: 6.0 Ah;Brushless motor: YES;Blade diameter: 190 mm;Bevel angle: up to 57°;Maximum speed: 0-5,800 rpm;Noise level: 103 dB;Max. cutting depth at 90°: 61 mm;Max. cutting depth at 90° (with guide rails): 57 mm;Max. cutting depth at 45°: 43 mm;Max. cutting depth at 45° (with guide rails): 39 mm;Weight: 5 kg...

DeWalt DCW200N Cordless Orbital Sander, 18 V XR, 1/4 Sheet The DeWalt DCW200N is a cordless orbital sander on the 18 V XR platform with a brushless motor and a base plate taking a quarter sheet of abrasive. The "N" suffix denotes delivery without battery or charger. Variable speed Orbit rate is set across 8,000 - 13,500 per minute. Low speeds suit delicate surfaces, lacquers and intermediate sanding, where high speed heats the material and clogs the paper. High speeds remove material quickly. Orbit size is 1.6 mm - typical for fine sanding, where the marks left behind stay invisible. Abrasive size The pad is 108 x 115 mm and takes a 140 x 115 mm sheet, a quarter of a standard sheet. The platen uses hook and loop for quick changes of punched abrasive, while clamps also accept plain paper cut from a full sheet - which noticeably reduces consumable cost on frequent changes. Dust extraction A one-handed locking dust bag is included, removed and emptied without unscrewing. The port connects directly to DeWalt's AirLock system or a standard 35 mm vacuum hose - working indoors, that is the difference between a film of dust over everything and a clean floor. Brushless motor Removing the carbon brushes removes the main wearing part and reduces heat. On a sander that matters doubly: the machine runs for long spells under steady load, which is exactly when brushed motors get hottest and lose speed. Low vibration The mechanism uses a dual-plane counterbalance that offsets the vibration rather than passing all of it into the hand. Sanding is one of the few operations where vibration accumulates over hours - reducing it is not a comfort feature but a condition for the hand lasting the day. Who it is for The machine is aimed at furniture makers, joiners, decorators and anyone preparing surfaces for paint and lacquer. The quarter-sheet format is the compromise between coverage and access: larger than a detail sander, yet small enough to reach the corners of frames and panels. Technical specifications ModelDCW200N PlatformDeWalt 18 V XR MotorBrushless Orbits per minute8,000 - 13,500 opm Orbit size1.6 mm Pad size108 x 115 mm Abrasive size140 x 115 mm (1/4 sheet) Abrasive fixingHook and loop + clamps Dust extractionBag + AirLock / 35 mm port VibrationDual-plane counterbalance SuppliedWithout battery and without charger Equipment 1 x DeWalt DCW200 orbital sander 1 x locking dust bag Without battery and without charger Questions and Answers What abrasive does it use? A 140 x 115 mm sheet, a quarter of a standard sheet. The platen has hook and loop for punched abrasive, but also clamps that hold plain paper cut from a full sheet - the cheaper option with frequent changes. Is a battery included? No. The "N" denotes delivery of the tool with its dust bag only. It runs on any battery from the DeWalt 18 V XR platform. A sander draws moderately, so a 4.0 or 5.0 Ah pack gives long runtime. What is variable speed for? To suit the material. High speed removes stock quickly in rough preparation; low speed is for lacquer, veneer and intermediate sanding, where high speed heats the surface, melts the finish and clogs the abrasive. Can a vacuum be connected? Yes. The port takes DeWalt's AirLock system and a standard 35 mm hose. Dust extraction while sanding is not only about cleanliness - collected dust is not dragged back under the abrasive, which extends its life and gives a more even surface. What does a 1.6 mm orbit mean? It is the distance the pad travels on each orbit. A smaller orbit gives a finer surface with less visible marking but removes material more slowly. 1.6 mm is a figure for fine sanding and preparation for paint, not for rapid levelling. How does it differ from a random orbit sander? A random orbit sander has a round pad and removes material faster, but cannot reach into corners. An orbital sander has a rectangular pad that sits tight into a corner - which is why it is preferred on frames, panels, casings and anything with square edges. Why does low vibration matter? Because sanding rarely lasts five minutes. The dual-plane counterbalance offsets part of the vibration before it reaches the hand. Over several hours of continuous work, that is the difference between a tired hand and numb fingers. ..

Makita HP457DZ Li-ion "G-Series" 18 V Drill Manufacturer: Makita Model: HP457DZ Warranty: 3 years after registration HP457DZ 18V G-Series Combination Drill/Driver - Batteries, charger, and carrying case not included! The HP457DZ is compatible only with G-Series batteries Description: Makita's G-Series range is a distinct lithium-ion platform separate from the Makita LXT line of professional cordless power tools and is powered exclusively by the G-Series battery and the DC18WA charger (not included in the set). Manufactured to a quality far exceeding that of "do-it-yourself" products, the G-Series offers a comprehensive catalog of tools and an attractive market price. The G-Series battery can be identified by its white or gray top and offers a battery capacity of 1.3 Ah in 14.4V and 18V platforms. With the G-Series DC18WA charger, a 60-minute charging time is achieved. G-Series batteries are not compatible with the Makita LXT line of cordless tools or chargers. The HP457DZ cordless drill/driver is powered by an 18V G-Series battery (not included), with variable speed control via the trigger to allow the user to match the speed to the application, delivering up to 21,000 RPM, 1,400 RPM, and 42 Nm of maximum torque for a wide range of applications. The HP457DZ is not compatible with 18V LXT batteries or chargers. The HP457DZ features 2 mechanical gears: a high-speed mode for fast drilling in light applications and a low-speed mode for heavy-duty applications requiring high torque. All-metal gear construction ensures high transmission durability. 16 torque settings plus a drill mode for additional fastening control. The drill/driver combo is equipped with a single-sleeve keyless chuck to allow for quick and easy one-handed bit installation and removal, a conveniently located reverse switch, and a rubberized soft grip for enhanced user control and comfort during use. Technical Specifications: Manufacturer: Makita Part Number: HP457DZ Product Dimensions: 23.9 x 8.3 x 24 cm; 1.56 kg Item Model Number: HP457DZ Color: Blue Power Source: Battery-powered Voltage: 18V Package quantity: 1 Number of pieces: 1 Measurement system: metric Included components: 1 x Makita HP457DZ Batteries included: No Batteries required: Yes Battery description: lithium-ion Item weight: 1.56 kg..

Makita M4501B Reciprocating SawDescription: The Makita M4501B electric reciprocating saw, with 1010 W of power and a 28 mm stroke , is designed for fast and efficient cutting of various materials. It performs excellently on wood, metal, and PVC pipes , providing a cutting depth of up to 250 mm in wood and 130 mm in pipes . Thanks to its ergonomic rubberized handle and adjustable cutting depth , the tool offers complete control and comfort during use. With the right blade, it can also be used for trimming branches and shrubs , making it an ideal choice for both construction tasks and garden maintenance. Technical specifications:Power: 1010 WNo-load speed: 0 - 2800 rpmBlade stroke: 28 mmMaximum pipe cutting depth: 130 mmMaximum cutting depth in wood: 255 mmNoise level: 88 dBDimensions (L x W x H): 457 x 98 x 174 mmWeight: 3.1 kg..

Dewalt DCL077-XJ 12V/18V 2000 lm Flashlight (Body Only) Manufacturer: Dewalt Model: DCL077-XJ Warranty: 3 years after registration Description: Compatible with both 12V and 18V batteries 3 brightness settings with a maximum output of 2000 lumens Multi-position handle with threads for tripod mounting Rated IP54 for protection against dust and water ingress Sold as body only-batteries and chargers sold separately Technical Specifications: Voltage: 12V / 18V Light output: 2000 lm Protection class: IP54 Weight: 1.13 kg Package includes: 1x DCL077-XJ 12V/18V 2000 lm Flashlight (Body only-batteries and charger not included)..