Consumables for tools - Page 59

HiKOKI Pointed Chisel 19 mm Round / 21 mm Hex Shank, 380 mm, 751532 HiKOKI 751532 is a pointed chisel for a demolition hammer with a 19 mm round / 21 mm hex shank and an overall length of 380 mm. EAN 8717472818324. Supplied singly. The pyramid point The point is forged to a pyramid. The shape is not decoration - the four tapered faces act as a wedge and split the material sideways instead of only crushing it downward. The whole blow concentrates on one point, which is why a pointed chisel penetrates where a flat one just bounces. What it is for It is intended for demolition work and for making openings and breakthroughs in concrete, masonry and many other materials. It also suits removing loose rock - where the substrate is already unstable and a flat chisel would smear it rather than lift it. Pointed or flat The site rule is simple. The point starts - it makes the first hole and breaks the mass open. The flat chisel continues - it widens what has been started and works across a surface. Starting straight in with a flat chisel on sound concrete wastes time and punishes the machine. The 19 / 21 mm shank This is the hex shank of heavy breakers, not SDS. The round section is 19 mm, the hex 21 mm. It is not interchangeable with SDS-max or SDS-plus: it is a separate standard for the heaviest class of machine. Compatible machines HiKOKI names them explicitly: DH50SA, DH50SA1, H55SA, H60KA - the HiKOKI and Hitachi breakers of that class. On another make with a 19/21 mm shank it will also fit, but check the depth of the tool holder. The 380 mm length 380 mm is the short length in this range - HiKOKI also offers 450 mm. The shorter chisel is stiffer and deflects less under the blow, which is why it is preferred close in and for breaking vertically downward. The longer one earns its place only when you need to reach depth. Greasing the shank The shank is greased with hammer grease before every insertion. A dry chisel in a dry holder wears the machine's bush - and that costs many times what the chisel does. Technical specifications ManufacturerHiKOKI Article751532 TypePointed chisel Shank19 mm round / 21 mm hex Overall length380 mm CompatibilityDH50SA, DH50SA1, H55SA, H60KA Quantity1 piece EAN8717472818324 Questions and Answers What shank does it have? 19 mm round / 21 mm hex - the heavy-breaker standard. Not SDS-max and not SDS-plus. Which machines does it fit? HiKOKI names DH50SA, DH50SA1, H55SA, H60KA - the HiKOKI and Hitachi breakers of that class. How long is it? 380 mm - the short one in the range. A 450 mm version also exists. When do I use a point rather than a flat chisel? The point starts - it makes the first hole and breaks the mass open. The flat chisel continues and works across a surface. Why is the point pyramid-shaped? The forged pyramid acts as a wedge and splits the material sideways, concentrating the blow on one point. How many are in the pack? One. Does it need greasing? Yes. Grease the shank with hammer grease every time - a dry shank wears the machine's bush. ..

Pica Powder Refill Pack, 45 g - 2030 Pica Powder Refill Pack 2030 is a refill of green fluorescent powder for the Pica Powder deep hole spray marker (art. 2020). The bottle holds 45 g of powder, and the 3x symbol on the label indicates enough for up to three fillings. According to the manufacturer the refill extends the service life of the marker - completely without propellant gas. No gas - ZERO GAS Pica Powder does not use an aerosol can but a long-life pump mechanism, which the manufacturer labels ZERO GAS. That is why the refill contains no gas either: the powder is simply topped up in the marker. Pica states that the robust pump mechanism makes refilling easy and protects the environment at the same time. How Pica Powder marks The marker makes contactless markings through drill holes up to 250 mm deep. One spray burst leaves a green fluorescent chalk-based dot and, according to the manufacturer, precisely images the whole surface of the drill hole. It suits holes from 3 mm upwards, has a spray arm that swivels 360° for hard-to-reach spots, and effective dust and moisture protection. The manufacturer states up to 1,500 shots and a durable pump mechanism. Marker features Among the key features of the Pica Powder the manufacturer lists the 360° swivel arm, dust and moisture protection, refillability, the gas-free pump mechanism and one-hand operation. The marker comes in a blister and in a retail display, and the Refill Pack is the accessory used to renew the powder. Applications Pica recommends the Powder for woodworking, electrical, plumbing and construction work. The marking adheres to all surfaces - dry, damp, rough and smooth - and is easy to remove from smooth surfaces. According to the manufacturer the quick handling saves time. Surfaces The manufacturer lists brick, wood, metal, plastic, tiles, plasterboard, glass, rubber, wet wood and wet rubber as suitable surfaces. The refill is intended for the Pica Powder marker; the marker itself is not included in this article. Technical specifications ManufacturerPica-Marker (PICA) Article2030 EAN4262357552922 TypePowder refill (Refill Pack) For markerPica Powder - deep hole spray marker (art. 2020) Contents45 g PowderGreen, fluorescent, chalk-based FillingsUp to 3 (3x symbol on the label) Propellant gasNone (ZERO GAS) The Pica Powder markerHoles from 3 mm, up to 250 mm deep, up to 1,500 shots, 360° arm SurfacesBrick, wood, metal, plastic, tiles, plasterboard, glass, rubber, wet wood, wet rubber Questions and Answers Which marker is this refill for? For the Pica Powder deep hole spray marker (art. 2020). The marker itself is not included - the refill is used to top up the powder in it. How much powder does the refill contain? The bottle holds 45 g of green fluorescent powder. The 3x symbol on the label indicates enough for up to three fillings. Does the refill contain gas? No. Pica Powder works with a pump mechanism without aerosol gas (ZERO GAS), so the refill is powder only, without propellant. What colour is the marking? Pica Powder leaves green fluorescent chalk-based markings. According to the manufacturer the marker precisely images the whole surface of the drill hole. Can the marking be removed? Yes, the manufacturer states that the marking is easy to remove from smooth surfaces. It adheres to dry, damp, rough and smooth surfaces. How deep can Pica Powder mark? The marker marks through drill holes up to 250 mm deep and from 3 mm in diameter. Its arm swivels 360° for hard-to-reach spots. How many shots does the marker give? The manufacturer states up to 1,500 shots and a durable pump mechanism. When the powder runs out, the marker is refilled with this Refill Pack. ..

Quick-release chuck 2-13 mm, set with SDS-Plus adapter Manufacturer code: 711099Manufacturer: Hitachi..