Working shoes - Page 2

Milwaukee FLEXTRED S1PS 1M110133 Safety Footwear, Size 47 Milwaukee FLEXTRED 1M110133 (article number 4932493712, EU size 47) is protective work footwear with a mid cut profile, certified to EN ISO 20345:2022 in class S1PS. The upper is textile with reinforced nubuck panels. What class S1PS means The footwear is antistatic, with heel energy absorption, fuel-oil resistant and with non-metallic penetration resistance. Penetration resistance is non-metallic, which gives better underfoot flexibility and more even coverage than a steel plate, which leaves the edges unprotected. Entirely metal free Both the toe cap and the midsole protection are non-metallic. Besides the lower weight, that means the boots pass through metal detectors without being removed - significant in airports, courts, energy sites and controlled-access production. Going metal free also removes the cold bridge through which a steel toe chills the foot in winter. Laces with a pocket The footwear uses conventional laces with a stowaway lace pocket. The pocket tucks the lace ends under the tongue, so they do not trail, catch on ladders and scaffolding, or soak up mud. It is a small detail that saves trips on site. Heel technologies Three elements work together. ENERGY FOAM is a cushioning insert that returns part of the energy of each step - noticeable after a full day standing on concrete. ROLLCAGE is a stabilising frame that limits sideways roll of the heel on uneven ground. STEP-RELEASE is a tab at the back that lets the boot be levered off with the other foot, without bending down. Sole and ESD The sole carries the SR marking for slip resistance and FO for fuel and oil resistance - on contact with fuel it neither degrades nor softens. The footwear is ESD certified, meaning static electricity is discharged in a controlled way, a requirement when working with electronics and in atmospheres with combustible dust or vapour. Technical specifications ModelFLEXTRED S1PS 1M110133 Article number4932493712 SizeEU 47 StandardEN ISO 20345:2022 Protection classS1PS Profilemid cut (over the ankle) Uppertextile with reinforced nubuck panels Toe capNon-metallic Penetration resistanceNon-metallic insert Fasteningconventional laces with a stowaway lace pocket CushioningENERGY FOAM in the heel StabiliserROLLCAGE RemovalSTEP-RELEASE heel SoleSR - slip resistant, FO - fuel resistant ESDYes, certified Questions and Answers What size is this footwear? Article number 4932493712 corresponds to EU size 47. Every size of the model has its own article number, so when ordering check the number rather than the model name alone. What does the S1PS classification mean? S1PS denotes antistatic footwear with a closed heel, energy absorption, fuel-oil resistance and non-metallic penetration resistance. It does not include water resistance - wet conditions call for class S3S. Is there any metal in the construction? No. Both the toe cap and the midsole protection are non-metallic. The boots pass through metal detectors, weigh less than steel-toed equivalents and create no cold bridge to chill the foot in winter. What is the lace pocket? A small pocket under the tongue that tucks the lace ends away. They then do not trail on the ground, catch on ladders and scaffolding or soak up water - a small but practical guard against tripping. What is ENERGY FOAM for? It is a cushioning insert in the heel that absorbs the impact of each step and returns part of the energy. The difference is most noticeable after a full day on your feet on concrete or another hard surface. What does ESD certification mean? The footwear discharges accumulated static electricity to ground in a controlled way rather than allowing a sudden discharge. That is a requirement when handling electronic components and in atmospheres with combustible dust or vapour. Are they suitable for all-day wear? Yes, that is what they are built for. ENERGY FOAM in the heel, the ROLLCAGE stabiliser and the metal-free construction together give lower weight and less fatigue than conventional steel-toed boots. ..

Milwaukee FLEXTRED S1PS B1M110133 Safety Footwear, Size 40 Milwaukee FLEXTRED B1M110133 (article number 4932498097, EU size 40) is protective work footwear with a mid cut profile, certified to EN ISO 20345:2022 in class S1PS. The upper is water-repellent nubuck leather. What class S1PS means The footwear is antistatic, with heel energy absorption, fuel-oil resistant and with non-metallic penetration resistance. Penetration resistance is non-metallic, which gives better underfoot flexibility and more even coverage than a steel plate, which leaves the edges unprotected. Entirely metal free Both the toe cap and the midsole protection are non-metallic. Besides the lower weight, that means the boots pass through metal detectors without being removed - significant in airports, courts, energy sites and controlled-access production. Going metal free also removes the cold bridge through which a steel toe chills the foot in winter. BOA Fit system Instead of laces the footwear uses a BOA Fit system with a rotating dial. Tightening takes one turn and adjusts precisely, including with gloves on - no untying, no knots working loose through the day. Release is by pulling the dial out. On work where boots come off several times a day, the time saved adds up. Heel technologies Three elements work together. ENERGY FOAM is a cushioning insert that returns part of the energy of each step - noticeable after a full day standing on concrete. ROLLCAGE is a stabilising frame that limits sideways roll of the heel on uneven ground. STEP-RELEASE is a tab at the back that lets the boot be levered off with the other foot, without bending down. Sole and ESD The sole carries the SR marking for slip resistance and FO for fuel and oil resistance - on contact with fuel it neither degrades nor softens. The footwear is ESD certified, meaning static electricity is discharged in a controlled way, a requirement when working with electronics and in atmospheres with combustible dust or vapour. Technical specifications ModelFLEXTRED S1PS B1M110133 Article number4932498097 SizeEU 40 StandardEN ISO 20345:2022 Protection classS1PS Profilemid cut (over the ankle) Upperwater-repellent nubuck leather Toe capNon-metallic Penetration resistanceNon-metallic insert FasteningBOA Fit system with a rotating dial CushioningENERGY FOAM in the heel StabiliserROLLCAGE RemovalSTEP-RELEASE heel SoleSR - slip resistant, FO - fuel resistant ESDYes, certified Questions and Answers What size is this footwear? Article number 4932498097 corresponds to EU size 40. Every size of the model has its own article number, so when ordering check the number rather than the model name alone. What does the S1PS classification mean? S1PS denotes antistatic footwear with a closed heel, energy absorption, fuel-oil resistance and non-metallic penetration resistance. It does not include water resistance - wet conditions call for class S3S. Is there any metal in the construction? No. Both the toe cap and the midsole protection are non-metallic. The boots pass through metal detectors, weigh less than steel-toed equivalents and create no cold bridge to chill the foot in winter. How do they fasten? Through the BOA Fit system - turning the dial tightens evenly along the whole length, and pulling it out releases at once. It works with gloves on, does not loosen through the day and needs no tying. What is ENERGY FOAM for? It is a cushioning insert in the heel that absorbs the impact of each step and returns part of the energy. The difference is most noticeable after a full day on your feet on concrete or another hard surface. What does ESD certification mean? The footwear discharges accumulated static electricity to ground in a controlled way rather than allowing a sudden discharge. That is a requirement when handling electronic components and in atmospheres with combustible dust or vapour. Are they suitable for all-day wear? Yes, that is what they are built for. ENERGY FOAM in the heel, the ROLLCAGE stabiliser and the metal-free construction together give lower weight and less fatigue than conventional steel-toed boots. ..

Milwaukee FLEXTRED S1PS B1M110133 Safety Footwear, Size 41 Milwaukee FLEXTRED B1M110133 (article number 4932498098, EU size 41) is protective work footwear with a mid cut profile, certified to EN ISO 20345:2022 in class S1PS. The upper is water-repellent nubuck leather. What class S1PS means The footwear is antistatic, with heel energy absorption, fuel-oil resistant and with non-metallic penetration resistance. Penetration resistance is non-metallic, which gives better underfoot flexibility and more even coverage than a steel plate, which leaves the edges unprotected. Entirely metal free Both the toe cap and the midsole protection are non-metallic. Besides the lower weight, that means the boots pass through metal detectors without being removed - significant in airports, courts, energy sites and controlled-access production. Going metal free also removes the cold bridge through which a steel toe chills the foot in winter. BOA Fit system Instead of laces the footwear uses a BOA Fit system with a rotating dial. Tightening takes one turn and adjusts precisely, including with gloves on - no untying, no knots working loose through the day. Release is by pulling the dial out. On work where boots come off several times a day, the time saved adds up. Heel technologies Three elements work together. ENERGY FOAM is a cushioning insert that returns part of the energy of each step - noticeable after a full day standing on concrete. ROLLCAGE is a stabilising frame that limits sideways roll of the heel on uneven ground. STEP-RELEASE is a tab at the back that lets the boot be levered off with the other foot, without bending down. Sole and ESD The sole carries the SR marking for slip resistance and FO for fuel and oil resistance - on contact with fuel it neither degrades nor softens. The footwear is ESD certified, meaning static electricity is discharged in a controlled way, a requirement when working with electronics and in atmospheres with combustible dust or vapour. Technical specifications ModelFLEXTRED S1PS B1M110133 Article number4932498098 SizeEU 41 StandardEN ISO 20345:2022 Protection classS1PS Profilemid cut (over the ankle) Upperwater-repellent nubuck leather Toe capNon-metallic Penetration resistanceNon-metallic insert FasteningBOA Fit system with a rotating dial CushioningENERGY FOAM in the heel StabiliserROLLCAGE RemovalSTEP-RELEASE heel SoleSR - slip resistant, FO - fuel resistant ESDYes, certified Questions and Answers What size is this footwear? Article number 4932498098 corresponds to EU size 41. Every size of the model has its own article number, so when ordering check the number rather than the model name alone. What does the S1PS classification mean? S1PS denotes antistatic footwear with a closed heel, energy absorption, fuel-oil resistance and non-metallic penetration resistance. It does not include water resistance - wet conditions call for class S3S. Is there any metal in the construction? No. Both the toe cap and the midsole protection are non-metallic. The boots pass through metal detectors, weigh less than steel-toed equivalents and create no cold bridge to chill the foot in winter. How do they fasten? Through the BOA Fit system - turning the dial tightens evenly along the whole length, and pulling it out releases at once. It works with gloves on, does not loosen through the day and needs no tying. What is ENERGY FOAM for? It is a cushioning insert in the heel that absorbs the impact of each step and returns part of the energy. The difference is most noticeable after a full day on your feet on concrete or another hard surface. What does ESD certification mean? The footwear discharges accumulated static electricity to ground in a controlled way rather than allowing a sudden discharge. That is a requirement when handling electronic components and in atmospheres with combustible dust or vapour. Are they suitable for all-day wear? Yes, that is what they are built for. ENERGY FOAM in the heel, the ROLLCAGE stabiliser and the metal-free construction together give lower weight and less fatigue than conventional steel-toed boots. ..

Milwaukee Flextred S1PS BOA ESD FO SR Safety Boots, Size 44, 4932498101DescriptionMilwaukee Flextred™ S1PS B1M110133 are high-cut safety work boots designed for professional use and all-day comfort. The specific product 4932498101 is supplied in size EU 44 / UK 10 and features the BOA® Fit System for quick and secure adjustment. The model features ENERGY FOAM cushioning in the heel area, designed to provide improved energy absorption and return during movement. The ROLLCAGE™ heel stabiliser supports stability when working on uneven terrain, while STEP-RELEASE™ technology makes the boots easier and quicker to remove. The upper is made from textile material to provide good ventilation, while the front area is reinforced for increased protection against abrasion. The boots feature non-metallic puncture protection, fuel and oil resistance (FO), slip resistance (SR) and ESD protection against electrostatic discharge.Technical SpecificationsBrand: MilwaukeeSeries: Flextred™Model: B1M110133Type: High-cut safety work bootsSize: EU 44 / UK 10Colour: BlackSafety Class: S1PSMarkings: ESD FO SRFastening System: BOA® Fit SystemCushioning: ENERGY FOAMHeel Stabiliser: ROLLCAGE™Easy Removal System: STEP-RELEASE™Upper: TextilePuncture Protection: Non-metallicFuel and Oil Resistance: FOSlip Resistance: SRESD Protection: YesPackage Includes1 x Pair of Milwaukee Flextred S1PS BOA Safety Boots, Size 44..

Milwaukee Flextred S1PS BOA Safety Shoes ESD FO SR, Size 47, 4932498104DescriptionThe Milwaukee Flextred S1PS BOA (Part No. 4932498104) are professional safety shoes in EU size 47, designed to provide outstanding comfort, support, and protection throughout the working day. The integrated BOA® Fit System enables fast, precise adjustment without traditional laces. Certified to EN ISO 20345:2022 S1PS ESD FO SR, the shoes feature a fiberglass toe cap and a non-metallic puncture-resistant plate, delivering lightweight protection and flexibility. The breathable textile upper and ENERGY FOAM midsole provide excellent cushioning and energy return for all-day comfort. Additional features include the ROLLCAGE™ heel support system for enhanced stability and STEP-RELEASE™ technology for easy removal. The outsole is oil- and fuel-resistant (FO) and offers excellent slip resistance (SR), making these shoes suitable for construction, industrial, maintenance, logistics, and trade professionals.Technical Specifications Brand: Milwaukee Model: Flextred S1PS BOA Part Number: 4932498104 Type: Safety shoes Size: EU 47 Colour: Black Closure system: BOA® Fit System Safety rating: S1PS ESD FO SR Standard: EN ISO 20345:2022 Toe cap: Fiberglass Puncture protection: Non-metallic Upper: Breathable textile Outsole: Oil- and fuel-resistant (FO), slip-resistant (SR) Additional features: ENERGY FOAM, ROLLCAGE™, STEP-RELEASE™ Package Includes 1 x Pair of Milwaukee Flextred S1PS BOA Safety Shoes, Size 47..

Milwaukee FLEXTRED S3S 1M171311 Safety Footwear, Size 37 Milwaukee FLEXTRED 1M171311 (article number 4932493741, EU size 37) is protective work footwear with a mid cut profile, certified to EN ISO 20345:2022 in class S3S. The upper is water-repellent nubuck in beige. What class S3S means The footwear is everything in class S1PS plus water resistance of the upper and better protection in wet conditions. Penetration resistance is non-metallic, which gives better underfoot flexibility and more even coverage than a steel plate, which leaves the edges unprotected. Entirely metal free Both the toe cap and the midsole protection are non-metallic. Besides the lower weight, that means the boots pass through metal detectors without being removed - significant in airports, courts, energy sites and controlled-access production. Going metal free also removes the cold bridge through which a steel toe chills the foot in winter. Laces with a pocket The footwear uses conventional laces with a stowaway lace pocket. The pocket tucks the lace ends under the tongue, so they do not trail, catch on ladders and scaffolding, or soak up mud. It is a small detail that saves trips on site. Heel technologies Three elements work together. ENERGY FOAM is a cushioning insert that returns part of the energy of each step - noticeable after a full day standing on concrete. ROLLCAGE is a stabilising frame that limits sideways roll of the heel on uneven ground. STEP-RELEASE is a tab at the back that lets the boot be levered off with the other foot, without bending down. Sole and ESD The sole carries the SR marking for slip resistance and FO for fuel and oil resistance - on contact with fuel it neither degrades nor softens. The footwear is ESD certified, meaning static electricity is discharged in a controlled way, a requirement when working with electronics and in atmospheres with combustible dust or vapour. Technical specifications ModelFLEXTRED S3S 1M171311 Article number4932493741 SizeEU 37 StandardEN ISO 20345:2022 Protection classS3S Profilemid cut (over the ankle) Upperwater-repellent nubuck in beige Toe capNon-metallic Penetration resistanceNon-metallic insert Fasteningconventional laces with a stowaway lace pocket CushioningENERGY FOAM in the heel StabiliserROLLCAGE RemovalSTEP-RELEASE heel SoleSR - slip resistant, FO - fuel resistant ESDYes, certified Questions and Answers What size is this footwear? Article number 4932493741 corresponds to EU size 37. Every size of the model has its own article number, so when ordering check the number rather than the model name alone. What does the S3S classification mean? S3S covers everything in S1PS - antistatic, energy absorption, fuel-oil resistance and non-metallic penetration resistance - and adds water resistance of the upper. It is the class for outdoor and wet work. Is there any metal in the construction? No. Both the toe cap and the midsole protection are non-metallic. The boots pass through metal detectors, weigh less than steel-toed equivalents and create no cold bridge to chill the foot in winter. What is the lace pocket? A small pocket under the tongue that tucks the lace ends away. They then do not trail on the ground, catch on ladders and scaffolding or soak up water - a small but practical guard against tripping. What is ENERGY FOAM for? It is a cushioning insert in the heel that absorbs the impact of each step and returns part of the energy. The difference is most noticeable after a full day on your feet on concrete or another hard surface. What does ESD certification mean? The footwear discharges accumulated static electricity to ground in a controlled way rather than allowing a sudden discharge. That is a requirement when handling electronic components and in atmospheres with combustible dust or vapour. Are they suitable for all-day wear? Yes, that is what they are built for. ENERGY FOAM in the heel, the ROLLCAGE stabiliser and the metal-free construction together give lower weight and less fatigue than conventional steel-toed boots. ..

Milwaukee FLEXTRED S3S 1M171311 Safety Footwear, Size 40 Milwaukee FLEXTRED 1M171311 (article number 4932493744, EU size 40) is protective work footwear with a mid cut profile, certified to EN ISO 20345:2022 in class S3S. The upper is water-repellent nubuck in beige. What class S3S means The footwear is everything in class S1PS plus water resistance of the upper and better protection in wet conditions. Penetration resistance is non-metallic, which gives better underfoot flexibility and more even coverage than a steel plate, which leaves the edges unprotected. Entirely metal free Both the toe cap and the midsole protection are non-metallic. Besides the lower weight, that means the boots pass through metal detectors without being removed - significant in airports, courts, energy sites and controlled-access production. Going metal free also removes the cold bridge through which a steel toe chills the foot in winter. Laces with a pocket The footwear uses conventional laces with a stowaway lace pocket. The pocket tucks the lace ends under the tongue, so they do not trail, catch on ladders and scaffolding, or soak up mud. It is a small detail that saves trips on site. Heel technologies Three elements work together. ENERGY FOAM is a cushioning insert that returns part of the energy of each step - noticeable after a full day standing on concrete. ROLLCAGE is a stabilising frame that limits sideways roll of the heel on uneven ground. STEP-RELEASE is a tab at the back that lets the boot be levered off with the other foot, without bending down. Sole and ESD The sole carries the SR marking for slip resistance and FO for fuel and oil resistance - on contact with fuel it neither degrades nor softens. The footwear is ESD certified, meaning static electricity is discharged in a controlled way, a requirement when working with electronics and in atmospheres with combustible dust or vapour. Technical specifications ModelFLEXTRED S3S 1M171311 Article number4932493744 SizeEU 40 StandardEN ISO 20345:2022 Protection classS3S Profilemid cut (over the ankle) Upperwater-repellent nubuck in beige Toe capNon-metallic Penetration resistanceNon-metallic insert Fasteningconventional laces with a stowaway lace pocket CushioningENERGY FOAM in the heel StabiliserROLLCAGE RemovalSTEP-RELEASE heel SoleSR - slip resistant, FO - fuel resistant ESDYes, certified Questions and Answers What size is this footwear? Article number 4932493744 corresponds to EU size 40. Every size of the model has its own article number, so when ordering check the number rather than the model name alone. What does the S3S classification mean? S3S covers everything in S1PS - antistatic, energy absorption, fuel-oil resistance and non-metallic penetration resistance - and adds water resistance of the upper. It is the class for outdoor and wet work. Is there any metal in the construction? No. Both the toe cap and the midsole protection are non-metallic. The boots pass through metal detectors, weigh less than steel-toed equivalents and create no cold bridge to chill the foot in winter. What is the lace pocket? A small pocket under the tongue that tucks the lace ends away. They then do not trail on the ground, catch on ladders and scaffolding or soak up water - a small but practical guard against tripping. What is ENERGY FOAM for? It is a cushioning insert in the heel that absorbs the impact of each step and returns part of the energy. The difference is most noticeable after a full day on your feet on concrete or another hard surface. What does ESD certification mean? The footwear discharges accumulated static electricity to ground in a controlled way rather than allowing a sudden discharge. That is a requirement when handling electronic components and in atmospheres with combustible dust or vapour. Are they suitable for all-day wear? Yes, that is what they are built for. ENERGY FOAM in the heel, the ROLLCAGE stabiliser and the metal-free construction together give lower weight and less fatigue than conventional steel-toed boots. ..

Milwaukee FLEXTRED S3S 1M171311 Safety Footwear, Size 45 Milwaukee FLEXTRED 1M171311 (article number 4932493749, EU size 45) is protective work footwear with a mid cut profile, certified to EN ISO 20345:2022 in class S3S. The upper is water-repellent nubuck in beige. What class S3S means The footwear is everything in class S1PS plus water resistance of the upper and better protection in wet conditions. Penetration resistance is non-metallic, which gives better underfoot flexibility and more even coverage than a steel plate, which leaves the edges unprotected. Entirely metal free Both the toe cap and the midsole protection are non-metallic. Besides the lower weight, that means the boots pass through metal detectors without being removed - significant in airports, courts, energy sites and controlled-access production. Going metal free also removes the cold bridge through which a steel toe chills the foot in winter. Laces with a pocket The footwear uses conventional laces with a stowaway lace pocket. The pocket tucks the lace ends under the tongue, so they do not trail, catch on ladders and scaffolding, or soak up mud. It is a small detail that saves trips on site. Heel technologies Three elements work together. ENERGY FOAM is a cushioning insert that returns part of the energy of each step - noticeable after a full day standing on concrete. ROLLCAGE is a stabilising frame that limits sideways roll of the heel on uneven ground. STEP-RELEASE is a tab at the back that lets the boot be levered off with the other foot, without bending down. Sole and ESD The sole carries the SR marking for slip resistance and FO for fuel and oil resistance - on contact with fuel it neither degrades nor softens. The footwear is ESD certified, meaning static electricity is discharged in a controlled way, a requirement when working with electronics and in atmospheres with combustible dust or vapour. Technical specifications ModelFLEXTRED S3S 1M171311 Article number4932493749 SizeEU 45 StandardEN ISO 20345:2022 Protection classS3S Profilemid cut (over the ankle) Upperwater-repellent nubuck in beige Toe capNon-metallic Penetration resistanceNon-metallic insert Fasteningconventional laces with a stowaway lace pocket CushioningENERGY FOAM in the heel StabiliserROLLCAGE RemovalSTEP-RELEASE heel SoleSR - slip resistant, FO - fuel resistant ESDYes, certified Questions and Answers What size is this footwear? Article number 4932493749 corresponds to EU size 45. Every size of the model has its own article number, so when ordering check the number rather than the model name alone. What does the S3S classification mean? S3S covers everything in S1PS - antistatic, energy absorption, fuel-oil resistance and non-metallic penetration resistance - and adds water resistance of the upper. It is the class for outdoor and wet work. Is there any metal in the construction? No. Both the toe cap and the midsole protection are non-metallic. The boots pass through metal detectors, weigh less than steel-toed equivalents and create no cold bridge to chill the foot in winter. What is the lace pocket? A small pocket under the tongue that tucks the lace ends away. They then do not trail on the ground, catch on ladders and scaffolding or soak up water - a small but practical guard against tripping. What is ENERGY FOAM for? It is a cushioning insert in the heel that absorbs the impact of each step and returns part of the energy. The difference is most noticeable after a full day on your feet on concrete or another hard surface. What does ESD certification mean? The footwear discharges accumulated static electricity to ground in a controlled way rather than allowing a sudden discharge. That is a requirement when handling electronic components and in atmospheres with combustible dust or vapour. Are they suitable for all-day wear? Yes, that is what they are built for. ENERGY FOAM in the heel, the ROLLCAGE stabiliser and the metal-free construction together give lower weight and less fatigue than conventional steel-toed boots. ..

Milwaukee FLEXTRED S3S B1L110133 Safety Footwear, Size 41 Milwaukee FLEXTRED B1L110133 (article number 4932498111, EU size 41) is protective work footwear with a low cut profile, certified to EN ISO 20345:2022 in class S3S. The upper is water-repellent nubuck leather. What class S3S means The footwear is everything in class S1PS plus water resistance of the upper and better protection in wet conditions. Penetration resistance is non-metallic, which gives better underfoot flexibility and more even coverage than a steel plate, which leaves the edges unprotected. Entirely metal free Both the toe cap and the midsole protection are non-metallic. Besides the lower weight, that means the boots pass through metal detectors without being removed - significant in airports, courts, energy sites and controlled-access production. Going metal free also removes the cold bridge through which a steel toe chills the foot in winter. BOA Fit system Instead of laces the footwear uses a BOA Fit system with a rotating dial. Tightening takes one turn and adjusts precisely, including with gloves on - no untying, no knots working loose through the day. Release is by pulling the dial out. On work where boots come off several times a day, the time saved adds up. Heel technologies Three elements work together. ENERGY FOAM is a cushioning insert that returns part of the energy of each step - noticeable after a full day standing on concrete. ROLLCAGE is a stabilising frame that limits sideways roll of the heel on uneven ground. STEP-RELEASE is a tab at the back that lets the boot be levered off with the other foot, without bending down. Sole and ESD The sole carries the SR marking for slip resistance and FO for fuel and oil resistance - on contact with fuel it neither degrades nor softens. The footwear is ESD certified, meaning static electricity is discharged in a controlled way, a requirement when working with electronics and in atmospheres with combustible dust or vapour. Technical specifications ModelFLEXTRED S3S B1L110133 Article number4932498111 SizeEU 41 StandardEN ISO 20345:2022 Protection classS3S Profilelow cut (below the ankle) Upperwater-repellent nubuck leather Toe capNon-metallic Penetration resistanceNon-metallic insert FasteningBOA Fit system with a rotating dial CushioningENERGY FOAM in the heel StabiliserROLLCAGE RemovalSTEP-RELEASE heel SoleSR - slip resistant, FO - fuel resistant ESDYes, certified Questions and Answers What size is this footwear? Article number 4932498111 corresponds to EU size 41. Every size of the model has its own article number, so when ordering check the number rather than the model name alone. What does the S3S classification mean? S3S covers everything in S1PS - antistatic, energy absorption, fuel-oil resistance and non-metallic penetration resistance - and adds water resistance of the upper. It is the class for outdoor and wet work. Is there any metal in the construction? No. Both the toe cap and the midsole protection are non-metallic. The boots pass through metal detectors, weigh less than steel-toed equivalents and create no cold bridge to chill the foot in winter. How do they fasten? Through the BOA Fit system - turning the dial tightens evenly along the whole length, and pulling it out releases at once. It works with gloves on, does not loosen through the day and needs no tying. What is ENERGY FOAM for? It is a cushioning insert in the heel that absorbs the impact of each step and returns part of the energy. The difference is most noticeable after a full day on your feet on concrete or another hard surface. What does ESD certification mean? The footwear discharges accumulated static electricity to ground in a controlled way rather than allowing a sudden discharge. That is a requirement when handling electronic components and in atmospheres with combustible dust or vapour. Are they suitable for all-day wear? Yes, that is what they are built for. ENERGY FOAM in the heel, the ROLLCAGE stabiliser and the metal-free construction together give lower weight and less fatigue than conventional steel-toed boots. ..

Milwaukee FLEXTRED S3S B1L110133 Safety Footwear, Size 43 Milwaukee FLEXTRED B1L110133 (article number 4932498113, EU size 43) is protective work footwear with a low cut profile, certified to EN ISO 20345:2022 in class S3S. The upper is water-repellent nubuck leather. What class S3S means The footwear is everything in class S1PS plus water resistance of the upper and better protection in wet conditions. Penetration resistance is non-metallic, which gives better underfoot flexibility and more even coverage than a steel plate, which leaves the edges unprotected. Entirely metal free Both the toe cap and the midsole protection are non-metallic. Besides the lower weight, that means the boots pass through metal detectors without being removed - significant in airports, courts, energy sites and controlled-access production. Going metal free also removes the cold bridge through which a steel toe chills the foot in winter. BOA Fit system Instead of laces the footwear uses a BOA Fit system with a rotating dial. Tightening takes one turn and adjusts precisely, including with gloves on - no untying, no knots working loose through the day. Release is by pulling the dial out. On work where boots come off several times a day, the time saved adds up. Heel technologies Three elements work together. ENERGY FOAM is a cushioning insert that returns part of the energy of each step - noticeable after a full day standing on concrete. ROLLCAGE is a stabilising frame that limits sideways roll of the heel on uneven ground. STEP-RELEASE is a tab at the back that lets the boot be levered off with the other foot, without bending down. Sole and ESD The sole carries the SR marking for slip resistance and FO for fuel and oil resistance - on contact with fuel it neither degrades nor softens. The footwear is ESD certified, meaning static electricity is discharged in a controlled way, a requirement when working with electronics and in atmospheres with combustible dust or vapour. Technical specifications ModelFLEXTRED S3S B1L110133 Article number4932498113 SizeEU 43 StandardEN ISO 20345:2022 Protection classS3S Profilelow cut (below the ankle) Upperwater-repellent nubuck leather Toe capNon-metallic Penetration resistanceNon-metallic insert FasteningBOA Fit system with a rotating dial CushioningENERGY FOAM in the heel StabiliserROLLCAGE RemovalSTEP-RELEASE heel SoleSR - slip resistant, FO - fuel resistant ESDYes, certified Questions and Answers What size is this footwear? Article number 4932498113 corresponds to EU size 43. Every size of the model has its own article number, so when ordering check the number rather than the model name alone. What does the S3S classification mean? S3S covers everything in S1PS - antistatic, energy absorption, fuel-oil resistance and non-metallic penetration resistance - and adds water resistance of the upper. It is the class for outdoor and wet work. Is there any metal in the construction? No. Both the toe cap and the midsole protection are non-metallic. The boots pass through metal detectors, weigh less than steel-toed equivalents and create no cold bridge to chill the foot in winter. How do they fasten? Through the BOA Fit system - turning the dial tightens evenly along the whole length, and pulling it out releases at once. It works with gloves on, does not loosen through the day and needs no tying. What is ENERGY FOAM for? It is a cushioning insert in the heel that absorbs the impact of each step and returns part of the energy. The difference is most noticeable after a full day on your feet on concrete or another hard surface. What does ESD certification mean? The footwear discharges accumulated static electricity to ground in a controlled way rather than allowing a sudden discharge. That is a requirement when handling electronic components and in atmospheres with combustible dust or vapour. Are they suitable for all-day wear? Yes, that is what they are built for. ENERGY FOAM in the heel, the ROLLCAGE stabiliser and the metal-free construction together give lower weight and less fatigue than conventional steel-toed boots. ..

Milwaukee Flextred S3S B1M110133 ESD SC FO SR Safety Boots, Size 43DescriptionThe Milwaukee Flextred S3S B1M110133 are high-cut professional safety boots in EU size 43, designed for demanding construction, industrial, maintenance, and trade applications. They feature the BOA® Fit System, allowing fast, precise adjustment without traditional laces. Certified to EN ISO 20345:2022 S3S ESD SC FO SR, the boots include a non-metallic toe cap and metal-free puncture-resistant midsole for lightweight protection. The water-repellent nubuck leather upper and reinforced Scuff Cap provide excellent durability and protection in harsh working environments. For enhanced comfort, the boots incorporate ENERGY FOAM cushioning, a ROLLCAGE™ heel stabilizer, and STEP-RELEASE™ technology for quick removal. The outsole is oil- and fuel-resistant (FO), offers excellent slip resistance (SR), and is ESD certified for electrostatic discharge protection.Technical Specifications Brand: Milwaukee Model: Flextred S3S B1M110133 Type: High-cut safety boots Size: EU 43 Closure system: BOA® Fit System Safety rating: S3S ESD SC FO SR Standard: EN ISO 20345:2022 Upper: Water-repellent nubuck leather Toe cap: Non-metallic Puncture protection: Metal-free Outsole: Oil- and fuel-resistant (FO), slip-resistant (SR) Features: ENERGY FOAM, ROLLCAGE™, STEP-RELEASE™, Scuff Cap Package Includes 1 x Pair of Milwaukee Flextred S3S B1M110133 Safety Boots, Size 43..

Milwaukee FLEXTRED S3S B1M110133 Safety Footwear, Size 44 Milwaukee FLEXTRED B1M110133 (article number 4932498127, EU size 44) is protective work footwear with a mid cut profile, certified to EN ISO 20345:2022 in class S3S. The upper is water-repellent nubuck leather. What class S3S means The footwear is everything in class S1PS plus water resistance of the upper and better protection in wet conditions. Penetration resistance is non-metallic, which gives better underfoot flexibility and more even coverage than a steel plate, which leaves the edges unprotected. Entirely metal free Both the toe cap and the midsole protection are non-metallic. Besides the lower weight, that means the boots pass through metal detectors without being removed - significant in airports, courts, energy sites and controlled-access production. Going metal free also removes the cold bridge through which a steel toe chills the foot in winter. BOA Fit system Instead of laces the footwear uses a BOA Fit system with a rotating dial. Tightening takes one turn and adjusts precisely, including with gloves on - no untying, no knots working loose through the day. Release is by pulling the dial out. On work where boots come off several times a day, the time saved adds up. Heel technologies Three elements work together. ENERGY FOAM is a cushioning insert that returns part of the energy of each step - noticeable after a full day standing on concrete. ROLLCAGE is a stabilising frame that limits sideways roll of the heel on uneven ground. STEP-RELEASE is a tab at the back that lets the boot be levered off with the other foot, without bending down. Sole and ESD The sole carries the SR marking for slip resistance and FO for fuel and oil resistance - on contact with fuel it neither degrades nor softens. The footwear is ESD certified, meaning static electricity is discharged in a controlled way, a requirement when working with electronics and in atmospheres with combustible dust or vapour. Technical specifications ModelFLEXTRED S3S B1M110133 Article number4932498127 SizeEU 44 StandardEN ISO 20345:2022 Protection classS3S Profilemid cut (over the ankle) Upperwater-repellent nubuck leather Toe capNon-metallic Penetration resistanceNon-metallic insert FasteningBOA Fit system with a rotating dial CushioningENERGY FOAM in the heel StabiliserROLLCAGE RemovalSTEP-RELEASE heel SoleSR - slip resistant, FO - fuel resistant ESDYes, certified Questions and Answers What size is this footwear? Article number 4932498127 corresponds to EU size 44. Every size of the model has its own article number, so when ordering check the number rather than the model name alone. What does the S3S classification mean? S3S covers everything in S1PS - antistatic, energy absorption, fuel-oil resistance and non-metallic penetration resistance - and adds water resistance of the upper. It is the class for outdoor and wet work. Is there any metal in the construction? No. Both the toe cap and the midsole protection are non-metallic. The boots pass through metal detectors, weigh less than steel-toed equivalents and create no cold bridge to chill the foot in winter. How do they fasten? Through the BOA Fit system - turning the dial tightens evenly along the whole length, and pulling it out releases at once. It works with gloves on, does not loosen through the day and needs no tying. What is ENERGY FOAM for? It is a cushioning insert in the heel that absorbs the impact of each step and returns part of the energy. The difference is most noticeable after a full day on your feet on concrete or another hard surface. What does ESD certification mean? The footwear discharges accumulated static electricity to ground in a controlled way rather than allowing a sudden discharge. That is a requirement when handling electronic components and in atmospheres with combustible dust or vapour. Are they suitable for all-day wear? Yes, that is what they are built for. ENERGY FOAM in the heel, the ROLLCAGE stabiliser and the metal-free construction together give lower weight and less fatigue than conventional steel-toed boots. ..

Milwaukee 4932493728 Work BootsDescription:Milwaukee 4932493728 leather work boots combine flexibility with a stylish, sporty design, making them ideal for long hours on the job. The heel cushioning construction with ENERGY FOAM technology offers maximum comfort and reduces fatigue during prolonged use. The specially designed STEP-RELEASE heel tab makes it easy to quickly and comfortably take off the shoes. The shoes feature a practical pocket for storing laces, which prevents tripping accidents. The toe cap is made of fiberglass, ensuring high durability. The sole is slip-resistant and provides stability on various surfaces, meeting safety and comfort requirements. Technical specifications:Size: 37, 38, 39, 40, 41, 42, 43, 44, 45, 47, 48Color: blackToe cap: fiberglassMaterial: nubuck leatherProtection: S3Standard: EN ISO 20345:2022 S3S ESD SC FO SR.S3 - Closed heel, antistatic properties, energy absorption in the heel.Water resistance (moisture protection).Puncture-resistant sole.S - An enhanced version of S3 with reinforced protection according to the new requirements from 2022.ESD - Electrostatic discharge protection (protects sensitive electronics from static electricity).SC - Scuff Cap - reinforced toe cap for additional protection against wear.FO - Fuel and oil resistance (the sole is not damaged by them).SR - Slip Resistance (the highest safety standard for slippery surfaces). https://youtube.com/shorts/S-CpHUe_kXQ?si=pBjFClG_sRZo4bYo..

Milwaukee 4932493729 Work BootsDescription:Milwaukee 4932493729 leather work boots combine flexibility with a stylish, sporty design, making them ideal for long hours on the job. The heel cushioning construction with ENERGY FOAM technology offers maximum comfort and reduces fatigue during prolonged use. The specially designed STEP-RELEASE outer heel makes it easy to take the shoes off quickly and comfortably. The shoes feature a practical pocket for storing the laces, which prevents tripping accidents. The toe cap is made of fiberglass, ensuring high durability. The sole is slip-resistant and provides stability on various surfaces, meeting safety and comfort requirements. Technical specifications:Size: 37, 38, 39, 40, 41, 42, 43, 44, 45, 47, 48Color: blackToe cap: fiberglassMaterial: nubuck leatherProtection: S3Standard: EN ISO 20345:2022 S3S ESD SC FO SR.S3 - Closed heel, antistatic properties, energy absorption in the heel.Water resistance (moisture protection).Puncture-resistant sole.S - An enhanced version of S3 with reinforced protection according to the new requirements from 2022.ESD - Electrostatic discharge protection (protects sensitive electronics from static electricity).SC - Scuff Cap - reinforced toe cap for additional protection against wear.FO - Fuel and oil resistance (the sole is not damaged by them).SR - Slip Resistance (the highest safety standard for slippery surfaces). https://youtube.com/shorts/S-CpHUe_kXQ?si=pBjFClG_sRZo4bYo..

Milwaukee 4932493731 Work BootsDescription:Milwaukee 4932493731 leather work shoes combine flexibility with a stylish, sporty design, making them ideal for long hours on the job. The heel cushioning construction with ENERGY FOAM technology offers maximum comfort and reduces fatigue during prolonged use. The specially designed STEP-RELEASE outer heel makes it easy to take the shoes off quickly and comfortably. The shoes feature a practical pocket for storing the laces, which prevents tripping accidents. The toe cap is made of fiberglass, ensuring high durability. The sole is slip-resistant and provides stability on various surfaces, meeting safety and comfort requirements. Technical specifications:Size: 37, 38, 39, 40, 41, 42, 43, 44, 45, 47, 48Color: blackToe cap: fiberglassMaterial: nubuck leatherProtection: S3Standard: EN ISO 20345:2022 S3S ESD SC FO SR.S3 - Closed heel, antistatic properties, energy absorption in the heel.Water resistance (moisture protection).Puncture-resistant sole.S - An enhanced version of S3 with reinforced protection according to the new requirements from 2022.ESD - Electrostatic discharge protection (protects sensitive electronics from static electricity).SC - Scuff Cap - reinforced toe cap for additional protection against wear.FO - Fuel and oil resistance (the sole is not damaged by them).SR - Slip Resistance (the highest safety standard for slippery surfaces). https://youtube.com/shorts/S-CpHUe_kXQ?si=pBjFClG_sRZo4bYo..

Milwaukee 4932493732 Work BootsDescription:Milwaukee 4932493732 leather work boots combine flexibility with a stylish, sporty design, making them ideal for long hours on the job. The heel cushioning construction with ENERGY FOAM technology offers maximum comfort and reduces fatigue during prolonged use. The specially designed STEP-RELEASE heel tab makes it easy to quickly and comfortably take off the shoes. The shoes feature a practical pocket for storing laces, which prevents tripping accidents. The toe cap is made of fiberglass, ensuring high durability. The sole is slip-resistant and provides stability on various surfaces, meeting safety and comfort requirements. Technical specifications:Size: 37, 38, 39, 40, 41, 42, 43, 44, 45, 47, 48Color: blackToe cap: fiberglassMaterial: nubuck leatherProtection: S3Standard: EN ISO 20345:2022 S3S ESD SC FO SR.S3 - Closed heel, antistatic properties, energy absorption in the heel.Water resistance (moisture protection).Puncture-resistant sole.S - An enhanced version of S3 with reinforced protection according to the new requirements from 2022.ESD - Electrostatic discharge protection (protects sensitive electronics from static electricity).SC - Scuff Cap - reinforced toe cap for additional protection against wear.FO - Fuel and oil resistance (the sole is not damaged by them).SR - Slip Resistance (the highest safety standard for slippery surfaces). https://youtube.com/shorts/S-CpHUe_kXQ?si=pBjFClG_sRZo4bYo..

Milwaukee 4932493733 Work ShoesDescription:Milwaukee 4932493733 leather work boots combine flexibility with a stylish, sporty design, making them ideal for long hours on the job. The heel cushioning construction with ENERGY FOAM technology offers maximum comfort and reduces fatigue during prolonged use. The specially designed STEP-RELEASE outer heel makes it easy to take the shoes off quickly and comfortably. The shoes feature a practical pocket for storing the laces, which prevents tripping accidents. The toe cap is made of fiberglass, ensuring high durability. The sole is slip-resistant and provides stability on various surfaces, meeting safety and comfort requirements. Technical specifications:Size: 37, 38, 39, 40, 41, 42, 43, 44, 45, 47, 48Color: blackToe cap: fiberglassMaterial: nubuck leatherProtection: S3Standard: EN ISO 20345:2022 S3S ESD SC FO SR.S3 - Closed heel, antistatic properties, energy absorption in the heel.Water resistance (moisture protection).Puncture-resistant sole.S - An enhanced version of S3 with reinforced protection according to the new requirements from 2022.ESD - Electrostatic discharge protection (protects sensitive electronics from static electricity).SC - Scuff Cap - reinforced toe cap for additional protection against wear.FO - Fuel and oil resistance (the sole is not damaged by them).SR - Slip Resistance (the highest safety standard for slippery surfaces). https://youtube.com/shorts/S-CpHUe_kXQ?si=pBjFClG_sRZo4bYo..

Milwaukee 4932493734 Work ShoesDescription:Milwaukee 4932493734 leather work boots combine flexibility with a stylish, sporty design, making them ideal for long hours on the job. The heel cushioning construction with ENERGY FOAM technology offers maximum comfort and reduces fatigue during prolonged use. The specially designed STEP-RELEASE outer heel makes it easy to take the shoes off quickly and comfortably. The shoes feature a practical pocket for storing the laces, which prevents tripping accidents. The toe cap is made of fiberglass, ensuring high durability. The sole is slip-resistant and provides stability on various surfaces, meeting safety and comfort requirements. Technical specifications:Size: 37, 38, 39, 40, 41, 42, 43, 44, 45, 47, 48Color: blackToe cap: fiberglassMaterial: nubuck leatherProtection: S3Standard: EN ISO 20345:2022 S3S ESD SC FO SR.S3 - Closed heel, antistatic properties, energy absorption in the heel.Water resistance (moisture protection).Puncture-resistant sole.S - An enhanced version of S3 with reinforced protection according to the new requirements from 2022.ESD - Electrostatic discharge protection (protects sensitive electronics from static electricity).SC - Scuff Cap - reinforced toe cap for additional protection against wear.FO - Fuel and oil resistance (the sole is not damaged by them).SR - Slip Resistance (the highest safety standard for slippery surfaces). https://youtube.com/shorts/S-CpHUe_kXQ?si=pBjFClG_sRZo4bYo..