DEWALT DWF50233-101-7 Steel-Toe Work BootsDescription: DEWALT Fargo Black work shoes are the perfect combination of modern design and reliable protection. The upper is made of lightweight synthetic material that ensures durability and longevity. With a padded tongue and collar, they provide extra comfort around the ankle. The included comfortable polyurethane insole ensures comfort and better shock absorption during long work hours. The shoe's outsole, made from a combination of phylon and rubber, offers excellent traction and stability on various work surfaces. For added safety, the shoes feature a steel toe cap that protects the toes from potential injuries. They are suitable for various work environments and are ideal for workers who value style and protection in one. Technical specifications:Size: 41Type: low-cutProtection class: SB, SRAMaterial: synthetic material and textileToe cap: metal (200J)Plate in the sole: noInsole length: 27.5 cmInsole: PUOutsole: phylon/rubberTraction: slip-resistant..

DeWalt Millington Brown Rigger Boots, Size 41 (UK 7), DWF50202-104-7 DeWalt Millington Brown (order number DWF50202-104-7) is a rigger-style safety boot in EU size 41, which corresponds to UK 7. It is classified S3 WR HRO SRA to EN ISO 20345. A rigger boot has no laces at all - it is pulled on and off by the two loops at the top of the shaft, which matters on sites where boots come off and go back on several times a day. Fully non-metallic construction The Millington is 100% non-metallic: the toe cap is composite and the anti-penetration midsole is non-metallic as well. That has three practical consequences. The boot is noticeably lighter than its steel equivalent at the same protection rating. It creates no cold bridge - a steel toe cap conducts outside cold straight to your toes, and in winter you feel that within the first hour. And it will not set off metal detectors, which matters at airports, in plants that screen for metal, and around sensitive instrumentation. Upper and waterproofing The upper is brown nubuck leather with a tall shaft that covers the ankle and the lower calf. Inside sits a waterproof breathable lining. The membrane works in both directions - it keeps water out while letting perspiration vapour escape - and this is exactly what separates a genuinely waterproof boot from a merely treated one, where your foot ends up damp from its own moisture after a few hours. An anti-scuff toe guard sits over the toe area and takes the abrasion from kneeling and from pushing material with the front of the boot, which is where nubuck otherwise wears through first. Outsole and heat resistance The outsole is dual-density PU/rubber. The polyurethane midlayer does the cushioning while the rubber outer layer absorbs the wear and delivers the grip. The HRO marking in the classification means tested resistance to contact heat up to 300 °C - relevant around hot asphalt, welding bays and roofing membranes. The tread is deeply cleated with a defined heel. Rigger versus laced boot Choosing between the two is not a matter of taste. A rigger goes on in seconds and has no laces to snag or come undone, which is why it is the default in the oil industry, on scaffolding, in agriculture and anywhere people step in and out repeatedly. The trade-off is that the fit cannot be adjusted: the boot has to suit your calf and your instep as it comes. If you have a high instep or a fuller calf, a laced model gives you more room to work with. Choosing your size The order number ends with the UK size and the European size is that number plus 34 - so UK 7 is EU 41. Trying rigger boots on matters more than with a laced model, because there is no way to tighten the fit afterwards. Try them in the afternoon, when your foot has swollen slightly, and with the socks you actually work in: a composite toe cap does not give, and pressure across the toes will not break in with wear. Who they are for The Millington is aimed at construction and installation crews, plant and machinery operators, warehouse and transport work, utilities and agriculture - anywhere you stand and walk all day, the ground is wet, and a dropped object or a nail underfoot is a real risk. Safety footwear remains the cheapest piece of personal protective equipment relative to what it prevents: crushed toes and puncture wounds are injuries measured in months of recovery. Technical specifications ModelDeWalt Millington Brown Order numberDWF50202-104-7 TypeRigger boot, no laces SizeEU 41 (UK 7) ClassificationS3 WR HRO SRA StandardEN ISO 20345:2011 Toe capComposite, non-metallic Underfoot protectionNon-metallic anti-penetration midsole Metal contentNone - 100% non-metallic construction UpperBrown nubuck with anti-scuff toe guard LiningWaterproof and breathable OutsoleDual-density PU/rubber Outsole heat resistanceContact heat to 300 °C (HRO) InsolePU comfort insole ColourBrown Questions and Answers What size are these boots? Order number DWF50202-104-7 corresponds to UK 7, which is EU 41. The number after the final hyphen is the UK size; add 34 to get the European size. What does the S3 WR HRO classification mean? S3 denotes safety footwear with a toe cap, an anti-penetration midsole, antistatic properties, energy absorption in the heel and a water-resistant upper. WR adds a whole-boot water resistance rating, and HRO means the outsole is tested against contact heat up to 300 °C. Is there any metal in the construction? No. The toe cap is composite and the midsole is non-metallic, so the boot is 100% non-metallic. That makes it lighter than its steel equivalent, stops cold conducting through to your toes, and means it will not trigger metal detectors. What is a rigger boot and how is it different? A rigger is a laceless boot with a tall shaft and two pull-on loops. The advantages are speed and..

DeWalt Millington Brown Rigger Boots, Size 45 (UK 11), DWF50202-104-11 DeWalt Millington Brown (order number DWF50202-104-11) is a rigger-style safety boot in EU size 45, which corresponds to UK 11. It is classified S3 WR HRO SRA to EN ISO 20345. A rigger boot has no laces at all - it is pulled on and off by the two loops at the top of the shaft, which matters on sites where boots come off and go back on several times a day. Fully non-metallic construction The Millington is 100% non-metallic: the toe cap is composite and the anti-penetration midsole is non-metallic as well. That has three practical consequences. The boot is noticeably lighter than its steel equivalent at the same protection rating. It creates no cold bridge - a steel toe cap conducts outside cold straight to your toes, and in winter you feel that within the first hour. And it will not set off metal detectors, which matters at airports, in plants that screen for metal, and around sensitive instrumentation. Upper and waterproofing The upper is brown nubuck leather with a tall shaft that covers the ankle and the lower calf. Inside sits a waterproof breathable lining. The membrane works in both directions - it keeps water out while letting perspiration vapour escape - and this is exactly what separates a genuinely waterproof boot from a merely treated one, where your foot ends up damp from its own moisture after a few hours. An anti-scuff toe guard sits over the toe area and takes the abrasion from kneeling and from pushing material with the front of the boot, which is where nubuck otherwise wears through first. Outsole and heat resistance The outsole is dual-density PU/rubber. The polyurethane midlayer does the cushioning while the rubber outer layer absorbs the wear and delivers the grip. The HRO marking in the classification means tested resistance to contact heat up to 300 °C - relevant around hot asphalt, welding bays and roofing membranes. The tread is deeply cleated with a defined heel. Rigger versus laced boot Choosing between the two is not a matter of taste. A rigger goes on in seconds and has no laces to snag or come undone, which is why it is the default in the oil industry, on scaffolding, in agriculture and anywhere people step in and out repeatedly. The trade-off is that the fit cannot be adjusted: the boot has to suit your calf and your instep as it comes. If you have a high instep or a fuller calf, a laced model gives you more room to work with. Choosing your size The order number ends with the UK size and the European size is that number plus 34 - so UK 11 is EU 45. Trying rigger boots on matters more than with a laced model, because there is no way to tighten the fit afterwards. Try them in the afternoon, when your foot has swollen slightly, and with the socks you actually work in: a composite toe cap does not give, and pressure across the toes will not break in with wear. Who they are for The Millington is aimed at construction and installation crews, plant and machinery operators, warehouse and transport work, utilities and agriculture - anywhere you stand and walk all day, the ground is wet, and a dropped object or a nail underfoot is a real risk. Safety footwear remains the cheapest piece of personal protective equipment relative to what it prevents: crushed toes and puncture wounds are injuries measured in months of recovery. Technical specifications ModelDeWalt Millington Brown Order numberDWF50202-104-11 TypeRigger boot, no laces SizeEU 45 (UK 11) ClassificationS3 WR HRO SRA StandardEN ISO 20345:2011 Toe capComposite, non-metallic Underfoot protectionNon-metallic anti-penetration midsole Metal contentNone - 100% non-metallic construction UpperBrown nubuck with anti-scuff toe guard LiningWaterproof and breathable OutsoleDual-density PU/rubber Outsole heat resistanceContact heat to 300 °C (HRO) InsolePU comfort insole ColourBrown Questions and Answers What size are these boots? Order number DWF50202-104-11 corresponds to UK 11, which is EU 45. The number after the final hyphen is the UK size; add 34 to get the European size. What does the S3 WR HRO classification mean? S3 denotes safety footwear with a toe cap, an anti-penetration midsole, antistatic properties, energy absorption in the heel and a water-resistant upper. WR adds a whole-boot water resistance rating, and HRO means the outsole is tested against contact heat up to 300 °C. Is there any metal in the construction? No. The toe cap is composite and the midsole is non-metallic, so the boot is 100% non-metallic. That makes it lighter than its steel equivalent, stops cold conducting through to your toes, and means it will not trigger metal detectors. What is a rigger boot and how is it different? A rigger is a laceless boot with a tall shaft and two pull-on loops. The advantages are ..

Milwaukee Flextred BEIGE S3S Safety Boots, Size 42, 4932493746DescriptionThe Milwaukee Flextred BEIGE S3S (4932493746) are professional high-cut safety boots designed to provide outstanding protection, comfort, and stability for construction, industrial, maintenance, and logistics applications. Size 42, certified to EN ISO 20345:2022 S3S ESD SC FO SR. The boots feature a water-repellent nubuck leather upper that protects against water, dust, and dirt. ENERGY FOAM heel cushioning delivers excellent comfort and energy return, while the ROLLCAGE™ heel stabilizer enhances stability on uneven terrain. Additional features include the STEP-RELEASE™ heel for quick removal, a lace pocket to secure the laces, a durable TPU scuff cap, and a metal-free construction for easy passage through security gates. The boots are ESD certified, feature an oil-resistant outsole (FO), and provide slip resistance (SR) for reliable performance in demanding working environments.Technical Specifications Brand: Milwaukee Model: Flextred BEIGE S3S Size: 42 Type: High-cut safety boots Colour: Beige Upper: Water-repellent nubuck leather Toe cap: Fiberglass Penetration-resistant midsole: Non-metallic composite Construction: Metal-free Heel cushioning: ENERGY FOAM Heel stabilizer: ROLLCAGE™ Heel release: STEP-RELEASE™ Toe protection: TPU Scuff Cap ESD certified: Yes Oil-resistant outsole: FO Slip resistance: SR Standard: EN ISO 20345:2022 S3S ESD SC FO SR Package Includes 1 x Pair of Milwaukee Flextred BEIGE S3S Safety Boots, Size 42..

Milwaukee FLEXTRED S1PS 1L110133 Safety Footwear, Size 46 Milwaukee FLEXTRED 1L110133 (article number 4932493698, EU size 46) is protective work footwear with a low cut profile, certified to EN ISO 20345:2022 in class S1PS. The upper is textile with reinforced nubuck panels, black. What class S1PS means The footwear is antistatic, with heel energy absorption, fuel-oil resistant and with non-metallic penetration resistance. Penetration resistance is non-metallic, which gives better underfoot flexibility and more even coverage than a steel plate, which leaves the edges unprotected. Entirely metal free Both the toe cap and the midsole protection are non-metallic. Besides the lower weight, that means the boots pass through metal detectors without being removed - significant in airports, courts, energy sites and controlled-access production. Going metal free also removes the cold bridge through which a steel toe chills the foot in winter. Laces with a pocket The footwear uses conventional laces with a stowaway lace pocket. The pocket tucks the lace ends under the tongue, so they do not trail, catch on ladders and scaffolding, or soak up mud. It is a small detail that saves trips on site. Heel technologies Three elements work together. ENERGY FOAM is a cushioning insert that returns part of the energy of each step - noticeable after a full day standing on concrete. ROLLCAGE is a stabilising frame that limits sideways roll of the heel on uneven ground. STEP-RELEASE is a tab at the back that lets the boot be levered off with the other foot, without bending down. Sole and ESD The sole carries the SR marking for slip resistance and FO for fuel and oil resistance - on contact with fuel it neither degrades nor softens. The footwear is ESD certified, meaning static electricity is discharged in a controlled way, a requirement when working with electronics and in atmospheres with combustible dust or vapour. Technical specifications ModelFLEXTRED S1PS 1L110133 Article number4932493698 SizeEU 46 StandardEN ISO 20345:2022 Protection classS1PS Profilelow cut (below the ankle) Uppertextile with reinforced nubuck panels, black Toe capNon-metallic Penetration resistanceNon-metallic insert Fasteningconventional laces with a stowaway lace pocket CushioningENERGY FOAM in the heel StabiliserROLLCAGE RemovalSTEP-RELEASE heel SoleSR - slip resistant, FO - fuel resistant ESDYes, certified Questions and Answers What size is this footwear? Article number 4932493698 corresponds to EU size 46. Every size of the model has its own article number, so when ordering check the number rather than the model name alone. What does the S1PS classification mean? S1PS denotes antistatic footwear with a closed heel, energy absorption, fuel-oil resistance and non-metallic penetration resistance. It does not include water resistance - wet conditions call for class S3S. Is there any metal in the construction? No. Both the toe cap and the midsole protection are non-metallic. The boots pass through metal detectors, weigh less than steel-toed equivalents and create no cold bridge to chill the foot in winter. What is the lace pocket? A small pocket under the tongue that tucks the lace ends away. They then do not trail on the ground, catch on ladders and scaffolding or soak up water - a small but practical guard against tripping. What is ENERGY FOAM for? It is a cushioning insert in the heel that absorbs the impact of each step and returns part of the energy. The difference is most noticeable after a full day on your feet on concrete or another hard surface. What does ESD certification mean? The footwear discharges accumulated static electricity to ground in a controlled way rather than allowing a sudden discharge. That is a requirement when handling electronic components and in atmospheres with combustible dust or vapour. Are they suitable for all-day wear? Yes, that is what they are built for. ENERGY FOAM in the heel, the ROLLCAGE stabiliser and the metal-free construction together give lower weight and less fatigue than conventional steel-toed boots. ..

Milwaukee FLEXTRED S1PS 1M110133 Safety Footwear, Size 37 Milwaukee FLEXTRED 1M110133 (article number 4932493702, EU size 37) is protective work footwear with a mid cut profile, certified to EN ISO 20345:2022 in class S1PS. The upper is textile with reinforced nubuck panels. What class S1PS means The footwear is antistatic, with heel energy absorption, fuel-oil resistant and with non-metallic penetration resistance. Penetration resistance is non-metallic, which gives better underfoot flexibility and more even coverage than a steel plate, which leaves the edges unprotected. Entirely metal free Both the toe cap and the midsole protection are non-metallic. Besides the lower weight, that means the boots pass through metal detectors without being removed - significant in airports, courts, energy sites and controlled-access production. Going metal free also removes the cold bridge through which a steel toe chills the foot in winter. Laces with a pocket The footwear uses conventional laces with a stowaway lace pocket. The pocket tucks the lace ends under the tongue, so they do not trail, catch on ladders and scaffolding, or soak up mud. It is a small detail that saves trips on site. Heel technologies Three elements work together. ENERGY FOAM is a cushioning insert that returns part of the energy of each step - noticeable after a full day standing on concrete. ROLLCAGE is a stabilising frame that limits sideways roll of the heel on uneven ground. STEP-RELEASE is a tab at the back that lets the boot be levered off with the other foot, without bending down. Sole and ESD The sole carries the SR marking for slip resistance and FO for fuel and oil resistance - on contact with fuel it neither degrades nor softens. The footwear is ESD certified, meaning static electricity is discharged in a controlled way, a requirement when working with electronics and in atmospheres with combustible dust or vapour. Technical specifications ModelFLEXTRED S1PS 1M110133 Article number4932493702 SizeEU 37 StandardEN ISO 20345:2022 Protection classS1PS Profilemid cut (over the ankle) Uppertextile with reinforced nubuck panels Toe capNon-metallic Penetration resistanceNon-metallic insert Fasteningconventional laces with a stowaway lace pocket CushioningENERGY FOAM in the heel StabiliserROLLCAGE RemovalSTEP-RELEASE heel SoleSR - slip resistant, FO - fuel resistant ESDYes, certified Questions and Answers What size is this footwear? Article number 4932493702 corresponds to EU size 37. Every size of the model has its own article number, so when ordering check the number rather than the model name alone. What does the S1PS classification mean? S1PS denotes antistatic footwear with a closed heel, energy absorption, fuel-oil resistance and non-metallic penetration resistance. It does not include water resistance - wet conditions call for class S3S. Is there any metal in the construction? No. Both the toe cap and the midsole protection are non-metallic. The boots pass through metal detectors, weigh less than steel-toed equivalents and create no cold bridge to chill the foot in winter. What is the lace pocket? A small pocket under the tongue that tucks the lace ends away. They then do not trail on the ground, catch on ladders and scaffolding or soak up water - a small but practical guard against tripping. What is ENERGY FOAM for? It is a cushioning insert in the heel that absorbs the impact of each step and returns part of the energy. The difference is most noticeable after a full day on your feet on concrete or another hard surface. What does ESD certification mean? The footwear discharges accumulated static electricity to ground in a controlled way rather than allowing a sudden discharge. That is a requirement when handling electronic components and in atmospheres with combustible dust or vapour. Are they suitable for all-day wear? Yes, that is what they are built for. ENERGY FOAM in the heel, the ROLLCAGE stabiliser and the metal-free construction together give lower weight and less fatigue than conventional steel-toed boots. ..

Milwaukee FLEXTRED S1PS 1M110133 Safety Footwear, Size 40 Milwaukee FLEXTRED 1M110133 (article number 4932493705, EU size 40) is protective work footwear with a mid cut profile, certified to EN ISO 20345:2022 in class S1PS. The upper is textile with reinforced nubuck panels. What class S1PS means The footwear is antistatic, with heel energy absorption, fuel-oil resistant and with non-metallic penetration resistance. Penetration resistance is non-metallic, which gives better underfoot flexibility and more even coverage than a steel plate, which leaves the edges unprotected. Entirely metal free Both the toe cap and the midsole protection are non-metallic. Besides the lower weight, that means the boots pass through metal detectors without being removed - significant in airports, courts, energy sites and controlled-access production. Going metal free also removes the cold bridge through which a steel toe chills the foot in winter. Laces with a pocket The footwear uses conventional laces with a stowaway lace pocket. The pocket tucks the lace ends under the tongue, so they do not trail, catch on ladders and scaffolding, or soak up mud. It is a small detail that saves trips on site. Heel technologies Three elements work together. ENERGY FOAM is a cushioning insert that returns part of the energy of each step - noticeable after a full day standing on concrete. ROLLCAGE is a stabilising frame that limits sideways roll of the heel on uneven ground. STEP-RELEASE is a tab at the back that lets the boot be levered off with the other foot, without bending down. Sole and ESD The sole carries the SR marking for slip resistance and FO for fuel and oil resistance - on contact with fuel it neither degrades nor softens. The footwear is ESD certified, meaning static electricity is discharged in a controlled way, a requirement when working with electronics and in atmospheres with combustible dust or vapour. Technical specifications ModelFLEXTRED S1PS 1M110133 Article number4932493705 SizeEU 40 StandardEN ISO 20345:2022 Protection classS1PS Profilemid cut (over the ankle) Uppertextile with reinforced nubuck panels Toe capNon-metallic Penetration resistanceNon-metallic insert Fasteningconventional laces with a stowaway lace pocket CushioningENERGY FOAM in the heel StabiliserROLLCAGE RemovalSTEP-RELEASE heel SoleSR - slip resistant, FO - fuel resistant ESDYes, certified Questions and Answers What size is this footwear? Article number 4932493705 corresponds to EU size 40. Every size of the model has its own article number, so when ordering check the number rather than the model name alone. What does the S1PS classification mean? S1PS denotes antistatic footwear with a closed heel, energy absorption, fuel-oil resistance and non-metallic penetration resistance. It does not include water resistance - wet conditions call for class S3S. Is there any metal in the construction? No. Both the toe cap and the midsole protection are non-metallic. The boots pass through metal detectors, weigh less than steel-toed equivalents and create no cold bridge to chill the foot in winter. What is the lace pocket? A small pocket under the tongue that tucks the lace ends away. They then do not trail on the ground, catch on ladders and scaffolding or soak up water - a small but practical guard against tripping. What is ENERGY FOAM for? It is a cushioning insert in the heel that absorbs the impact of each step and returns part of the energy. The difference is most noticeable after a full day on your feet on concrete or another hard surface. What does ESD certification mean? The footwear discharges accumulated static electricity to ground in a controlled way rather than allowing a sudden discharge. That is a requirement when handling electronic components and in atmospheres with combustible dust or vapour. Are they suitable for all-day wear? Yes, that is what they are built for. ENERGY FOAM in the heel, the ROLLCAGE stabiliser and the metal-free construction together give lower weight and less fatigue than conventional steel-toed boots. ..

Milwaukee FLEXTRED S1PS 1M110133 Safety Footwear, Size 43 Milwaukee FLEXTRED 1M110133 (article number 4932493708, EU size 43) is protective work footwear with a mid cut profile, certified to EN ISO 20345:2022 in class S1PS. The upper is textile with reinforced nubuck panels. What class S1PS means The footwear is antistatic, with heel energy absorption, fuel-oil resistant and with non-metallic penetration resistance. Penetration resistance is non-metallic, which gives better underfoot flexibility and more even coverage than a steel plate, which leaves the edges unprotected. Entirely metal free Both the toe cap and the midsole protection are non-metallic. Besides the lower weight, that means the boots pass through metal detectors without being removed - significant in airports, courts, energy sites and controlled-access production. Going metal free also removes the cold bridge through which a steel toe chills the foot in winter. Laces with a pocket The footwear uses conventional laces with a stowaway lace pocket. The pocket tucks the lace ends under the tongue, so they do not trail, catch on ladders and scaffolding, or soak up mud. It is a small detail that saves trips on site. Heel technologies Three elements work together. ENERGY FOAM is a cushioning insert that returns part of the energy of each step - noticeable after a full day standing on concrete. ROLLCAGE is a stabilising frame that limits sideways roll of the heel on uneven ground. STEP-RELEASE is a tab at the back that lets the boot be levered off with the other foot, without bending down. Sole and ESD The sole carries the SR marking for slip resistance and FO for fuel and oil resistance - on contact with fuel it neither degrades nor softens. The footwear is ESD certified, meaning static electricity is discharged in a controlled way, a requirement when working with electronics and in atmospheres with combustible dust or vapour. Technical specifications ModelFLEXTRED S1PS 1M110133 Article number4932493708 SizeEU 43 StandardEN ISO 20345:2022 Protection classS1PS Profilemid cut (over the ankle) Uppertextile with reinforced nubuck panels Toe capNon-metallic Penetration resistanceNon-metallic insert Fasteningconventional laces with a stowaway lace pocket CushioningENERGY FOAM in the heel StabiliserROLLCAGE RemovalSTEP-RELEASE heel SoleSR - slip resistant, FO - fuel resistant ESDYes, certified Questions and Answers What size is this footwear? Article number 4932493708 corresponds to EU size 43. Every size of the model has its own article number, so when ordering check the number rather than the model name alone. What does the S1PS classification mean? S1PS denotes antistatic footwear with a closed heel, energy absorption, fuel-oil resistance and non-metallic penetration resistance. It does not include water resistance - wet conditions call for class S3S. Is there any metal in the construction? No. Both the toe cap and the midsole protection are non-metallic. The boots pass through metal detectors, weigh less than steel-toed equivalents and create no cold bridge to chill the foot in winter. What is the lace pocket? A small pocket under the tongue that tucks the lace ends away. They then do not trail on the ground, catch on ladders and scaffolding or soak up water - a small but practical guard against tripping. What is ENERGY FOAM for? It is a cushioning insert in the heel that absorbs the impact of each step and returns part of the energy. The difference is most noticeable after a full day on your feet on concrete or another hard surface. What does ESD certification mean? The footwear discharges accumulated static electricity to ground in a controlled way rather than allowing a sudden discharge. That is a requirement when handling electronic components and in atmospheres with combustible dust or vapour. Are they suitable for all-day wear? Yes, that is what they are built for. ENERGY FOAM in the heel, the ROLLCAGE stabiliser and the metal-free construction together give lower weight and less fatigue than conventional steel-toed boots. ..

Milwaukee FLEXTRED S1PS 1M110133 Safety Footwear, Size 46 Milwaukee FLEXTRED 1M110133 (article number 4932493711, EU size 46) is protective work footwear with a mid cut profile, certified to EN ISO 20345:2022 in class S1PS. The upper is textile with reinforced nubuck panels. What class S1PS means The footwear is antistatic, with heel energy absorption, fuel-oil resistant and with non-metallic penetration resistance. Penetration resistance is non-metallic, which gives better underfoot flexibility and more even coverage than a steel plate, which leaves the edges unprotected. Entirely metal free Both the toe cap and the midsole protection are non-metallic. Besides the lower weight, that means the boots pass through metal detectors without being removed - significant in airports, courts, energy sites and controlled-access production. Going metal free also removes the cold bridge through which a steel toe chills the foot in winter. Laces with a pocket The footwear uses conventional laces with a stowaway lace pocket. The pocket tucks the lace ends under the tongue, so they do not trail, catch on ladders and scaffolding, or soak up mud. It is a small detail that saves trips on site. Heel technologies Three elements work together. ENERGY FOAM is a cushioning insert that returns part of the energy of each step - noticeable after a full day standing on concrete. ROLLCAGE is a stabilising frame that limits sideways roll of the heel on uneven ground. STEP-RELEASE is a tab at the back that lets the boot be levered off with the other foot, without bending down. Sole and ESD The sole carries the SR marking for slip resistance and FO for fuel and oil resistance - on contact with fuel it neither degrades nor softens. The footwear is ESD certified, meaning static electricity is discharged in a controlled way, a requirement when working with electronics and in atmospheres with combustible dust or vapour. Technical specifications ModelFLEXTRED S1PS 1M110133 Article number4932493711 SizeEU 46 StandardEN ISO 20345:2022 Protection classS1PS Profilemid cut (over the ankle) Uppertextile with reinforced nubuck panels Toe capNon-metallic Penetration resistanceNon-metallic insert Fasteningconventional laces with a stowaway lace pocket CushioningENERGY FOAM in the heel StabiliserROLLCAGE RemovalSTEP-RELEASE heel SoleSR - slip resistant, FO - fuel resistant ESDYes, certified Questions and Answers What size is this footwear? Article number 4932493711 corresponds to EU size 46. Every size of the model has its own article number, so when ordering check the number rather than the model name alone. What does the S1PS classification mean? S1PS denotes antistatic footwear with a closed heel, energy absorption, fuel-oil resistance and non-metallic penetration resistance. It does not include water resistance - wet conditions call for class S3S. Is there any metal in the construction? No. Both the toe cap and the midsole protection are non-metallic. The boots pass through metal detectors, weigh less than steel-toed equivalents and create no cold bridge to chill the foot in winter. What is the lace pocket? A small pocket under the tongue that tucks the lace ends away. They then do not trail on the ground, catch on ladders and scaffolding or soak up water - a small but practical guard against tripping. What is ENERGY FOAM for? It is a cushioning insert in the heel that absorbs the impact of each step and returns part of the energy. The difference is most noticeable after a full day on your feet on concrete or another hard surface. What does ESD certification mean? The footwear discharges accumulated static electricity to ground in a controlled way rather than allowing a sudden discharge. That is a requirement when handling electronic components and in atmospheres with combustible dust or vapour. Are they suitable for all-day wear? Yes, that is what they are built for. ENERGY FOAM in the heel, the ROLLCAGE stabiliser and the metal-free construction together give lower weight and less fatigue than conventional steel-toed boots. ..

Milwaukee FLEXTRED S1PS 1M110133 Safety Footwear, Size 47 Milwaukee FLEXTRED 1M110133 (article number 4932493712, EU size 47) is protective work footwear with a mid cut profile, certified to EN ISO 20345:2022 in class S1PS. The upper is textile with reinforced nubuck panels. What class S1PS means The footwear is antistatic, with heel energy absorption, fuel-oil resistant and with non-metallic penetration resistance. Penetration resistance is non-metallic, which gives better underfoot flexibility and more even coverage than a steel plate, which leaves the edges unprotected. Entirely metal free Both the toe cap and the midsole protection are non-metallic. Besides the lower weight, that means the boots pass through metal detectors without being removed - significant in airports, courts, energy sites and controlled-access production. Going metal free also removes the cold bridge through which a steel toe chills the foot in winter. Laces with a pocket The footwear uses conventional laces with a stowaway lace pocket. The pocket tucks the lace ends under the tongue, so they do not trail, catch on ladders and scaffolding, or soak up mud. It is a small detail that saves trips on site. Heel technologies Three elements work together. ENERGY FOAM is a cushioning insert that returns part of the energy of each step - noticeable after a full day standing on concrete. ROLLCAGE is a stabilising frame that limits sideways roll of the heel on uneven ground. STEP-RELEASE is a tab at the back that lets the boot be levered off with the other foot, without bending down. Sole and ESD The sole carries the SR marking for slip resistance and FO for fuel and oil resistance - on contact with fuel it neither degrades nor softens. The footwear is ESD certified, meaning static electricity is discharged in a controlled way, a requirement when working with electronics and in atmospheres with combustible dust or vapour. Technical specifications ModelFLEXTRED S1PS 1M110133 Article number4932493712 SizeEU 47 StandardEN ISO 20345:2022 Protection classS1PS Profilemid cut (over the ankle) Uppertextile with reinforced nubuck panels Toe capNon-metallic Penetration resistanceNon-metallic insert Fasteningconventional laces with a stowaway lace pocket CushioningENERGY FOAM in the heel StabiliserROLLCAGE RemovalSTEP-RELEASE heel SoleSR - slip resistant, FO - fuel resistant ESDYes, certified Questions and Answers What size is this footwear? Article number 4932493712 corresponds to EU size 47. Every size of the model has its own article number, so when ordering check the number rather than the model name alone. What does the S1PS classification mean? S1PS denotes antistatic footwear with a closed heel, energy absorption, fuel-oil resistance and non-metallic penetration resistance. It does not include water resistance - wet conditions call for class S3S. Is there any metal in the construction? No. Both the toe cap and the midsole protection are non-metallic. The boots pass through metal detectors, weigh less than steel-toed equivalents and create no cold bridge to chill the foot in winter. What is the lace pocket? A small pocket under the tongue that tucks the lace ends away. They then do not trail on the ground, catch on ladders and scaffolding or soak up water - a small but practical guard against tripping. What is ENERGY FOAM for? It is a cushioning insert in the heel that absorbs the impact of each step and returns part of the energy. The difference is most noticeable after a full day on your feet on concrete or another hard surface. What does ESD certification mean? The footwear discharges accumulated static electricity to ground in a controlled way rather than allowing a sudden discharge. That is a requirement when handling electronic components and in atmospheres with combustible dust or vapour. Are they suitable for all-day wear? Yes, that is what they are built for. ENERGY FOAM in the heel, the ROLLCAGE stabiliser and the metal-free construction together give lower weight and less fatigue than conventional steel-toed boots. ..

Milwaukee FLEXTRED S1PS B1M110133 Safety Footwear, Size 40 Milwaukee FLEXTRED B1M110133 (article number 4932498097, EU size 40) is protective work footwear with a mid cut profile, certified to EN ISO 20345:2022 in class S1PS. The upper is water-repellent nubuck leather. What class S1PS means The footwear is antistatic, with heel energy absorption, fuel-oil resistant and with non-metallic penetration resistance. Penetration resistance is non-metallic, which gives better underfoot flexibility and more even coverage than a steel plate, which leaves the edges unprotected. Entirely metal free Both the toe cap and the midsole protection are non-metallic. Besides the lower weight, that means the boots pass through metal detectors without being removed - significant in airports, courts, energy sites and controlled-access production. Going metal free also removes the cold bridge through which a steel toe chills the foot in winter. BOA Fit system Instead of laces the footwear uses a BOA Fit system with a rotating dial. Tightening takes one turn and adjusts precisely, including with gloves on - no untying, no knots working loose through the day. Release is by pulling the dial out. On work where boots come off several times a day, the time saved adds up. Heel technologies Three elements work together. ENERGY FOAM is a cushioning insert that returns part of the energy of each step - noticeable after a full day standing on concrete. ROLLCAGE is a stabilising frame that limits sideways roll of the heel on uneven ground. STEP-RELEASE is a tab at the back that lets the boot be levered off with the other foot, without bending down. Sole and ESD The sole carries the SR marking for slip resistance and FO for fuel and oil resistance - on contact with fuel it neither degrades nor softens. The footwear is ESD certified, meaning static electricity is discharged in a controlled way, a requirement when working with electronics and in atmospheres with combustible dust or vapour. Technical specifications ModelFLEXTRED S1PS B1M110133 Article number4932498097 SizeEU 40 StandardEN ISO 20345:2022 Protection classS1PS Profilemid cut (over the ankle) Upperwater-repellent nubuck leather Toe capNon-metallic Penetration resistanceNon-metallic insert FasteningBOA Fit system with a rotating dial CushioningENERGY FOAM in the heel StabiliserROLLCAGE RemovalSTEP-RELEASE heel SoleSR - slip resistant, FO - fuel resistant ESDYes, certified Questions and Answers What size is this footwear? Article number 4932498097 corresponds to EU size 40. Every size of the model has its own article number, so when ordering check the number rather than the model name alone. What does the S1PS classification mean? S1PS denotes antistatic footwear with a closed heel, energy absorption, fuel-oil resistance and non-metallic penetration resistance. It does not include water resistance - wet conditions call for class S3S. Is there any metal in the construction? No. Both the toe cap and the midsole protection are non-metallic. The boots pass through metal detectors, weigh less than steel-toed equivalents and create no cold bridge to chill the foot in winter. How do they fasten? Through the BOA Fit system - turning the dial tightens evenly along the whole length, and pulling it out releases at once. It works with gloves on, does not loosen through the day and needs no tying. What is ENERGY FOAM for? It is a cushioning insert in the heel that absorbs the impact of each step and returns part of the energy. The difference is most noticeable after a full day on your feet on concrete or another hard surface. What does ESD certification mean? The footwear discharges accumulated static electricity to ground in a controlled way rather than allowing a sudden discharge. That is a requirement when handling electronic components and in atmospheres with combustible dust or vapour. Are they suitable for all-day wear? Yes, that is what they are built for. ENERGY FOAM in the heel, the ROLLCAGE stabiliser and the metal-free construction together give lower weight and less fatigue than conventional steel-toed boots. ..

Milwaukee FLEXTRED S1PS B1M110133 Safety Footwear, Size 41 Milwaukee FLEXTRED B1M110133 (article number 4932498098, EU size 41) is protective work footwear with a mid cut profile, certified to EN ISO 20345:2022 in class S1PS. The upper is water-repellent nubuck leather. What class S1PS means The footwear is antistatic, with heel energy absorption, fuel-oil resistant and with non-metallic penetration resistance. Penetration resistance is non-metallic, which gives better underfoot flexibility and more even coverage than a steel plate, which leaves the edges unprotected. Entirely metal free Both the toe cap and the midsole protection are non-metallic. Besides the lower weight, that means the boots pass through metal detectors without being removed - significant in airports, courts, energy sites and controlled-access production. Going metal free also removes the cold bridge through which a steel toe chills the foot in winter. BOA Fit system Instead of laces the footwear uses a BOA Fit system with a rotating dial. Tightening takes one turn and adjusts precisely, including with gloves on - no untying, no knots working loose through the day. Release is by pulling the dial out. On work where boots come off several times a day, the time saved adds up. Heel technologies Three elements work together. ENERGY FOAM is a cushioning insert that returns part of the energy of each step - noticeable after a full day standing on concrete. ROLLCAGE is a stabilising frame that limits sideways roll of the heel on uneven ground. STEP-RELEASE is a tab at the back that lets the boot be levered off with the other foot, without bending down. Sole and ESD The sole carries the SR marking for slip resistance and FO for fuel and oil resistance - on contact with fuel it neither degrades nor softens. The footwear is ESD certified, meaning static electricity is discharged in a controlled way, a requirement when working with electronics and in atmospheres with combustible dust or vapour. Technical specifications ModelFLEXTRED S1PS B1M110133 Article number4932498098 SizeEU 41 StandardEN ISO 20345:2022 Protection classS1PS Profilemid cut (over the ankle) Upperwater-repellent nubuck leather Toe capNon-metallic Penetration resistanceNon-metallic insert FasteningBOA Fit system with a rotating dial CushioningENERGY FOAM in the heel StabiliserROLLCAGE RemovalSTEP-RELEASE heel SoleSR - slip resistant, FO - fuel resistant ESDYes, certified Questions and Answers What size is this footwear? Article number 4932498098 corresponds to EU size 41. Every size of the model has its own article number, so when ordering check the number rather than the model name alone. What does the S1PS classification mean? S1PS denotes antistatic footwear with a closed heel, energy absorption, fuel-oil resistance and non-metallic penetration resistance. It does not include water resistance - wet conditions call for class S3S. Is there any metal in the construction? No. Both the toe cap and the midsole protection are non-metallic. The boots pass through metal detectors, weigh less than steel-toed equivalents and create no cold bridge to chill the foot in winter. How do they fasten? Through the BOA Fit system - turning the dial tightens evenly along the whole length, and pulling it out releases at once. It works with gloves on, does not loosen through the day and needs no tying. What is ENERGY FOAM for? It is a cushioning insert in the heel that absorbs the impact of each step and returns part of the energy. The difference is most noticeable after a full day on your feet on concrete or another hard surface. What does ESD certification mean? The footwear discharges accumulated static electricity to ground in a controlled way rather than allowing a sudden discharge. That is a requirement when handling electronic components and in atmospheres with combustible dust or vapour. Are they suitable for all-day wear? Yes, that is what they are built for. ENERGY FOAM in the heel, the ROLLCAGE stabiliser and the metal-free construction together give lower weight and less fatigue than conventional steel-toed boots. ..

Milwaukee Flextred S1PS BOA ESD FO SR Safety Boots, Size 44, 4932498101DescriptionMilwaukee Flextred™ S1PS B1M110133 are high-cut safety work boots designed for professional use and all-day comfort. The specific product 4932498101 is supplied in size EU 44 / UK 10 and features the BOA® Fit System for quick and secure adjustment. The model features ENERGY FOAM cushioning in the heel area, designed to provide improved energy absorption and return during movement. The ROLLCAGE™ heel stabiliser supports stability when working on uneven terrain, while STEP-RELEASE™ technology makes the boots easier and quicker to remove. The upper is made from textile material to provide good ventilation, while the front area is reinforced for increased protection against abrasion. The boots feature non-metallic puncture protection, fuel and oil resistance (FO), slip resistance (SR) and ESD protection against electrostatic discharge.Technical SpecificationsBrand: MilwaukeeSeries: Flextred™Model: B1M110133Type: High-cut safety work bootsSize: EU 44 / UK 10Colour: BlackSafety Class: S1PSMarkings: ESD FO SRFastening System: BOA® Fit SystemCushioning: ENERGY FOAMHeel Stabiliser: ROLLCAGE™Easy Removal System: STEP-RELEASE™Upper: TextilePuncture Protection: Non-metallicFuel and Oil Resistance: FOSlip Resistance: SRESD Protection: YesPackage Includes1 x Pair of Milwaukee Flextred S1PS BOA Safety Boots, Size 44..

Milwaukee Flextred S1PS BOA Safety Shoes ESD FO SR, Size 47, 4932498104DescriptionThe Milwaukee Flextred S1PS BOA (Part No. 4932498104) are professional safety shoes in EU size 47, designed to provide outstanding comfort, support, and protection throughout the working day. The integrated BOA® Fit System enables fast, precise adjustment without traditional laces. Certified to EN ISO 20345:2022 S1PS ESD FO SR, the shoes feature a fiberglass toe cap and a non-metallic puncture-resistant plate, delivering lightweight protection and flexibility. The breathable textile upper and ENERGY FOAM midsole provide excellent cushioning and energy return for all-day comfort. Additional features include the ROLLCAGE™ heel support system for enhanced stability and STEP-RELEASE™ technology for easy removal. The outsole is oil- and fuel-resistant (FO) and offers excellent slip resistance (SR), making these shoes suitable for construction, industrial, maintenance, logistics, and trade professionals.Technical Specifications Brand: Milwaukee Model: Flextred S1PS BOA Part Number: 4932498104 Type: Safety shoes Size: EU 47 Colour: Black Closure system: BOA® Fit System Safety rating: S1PS ESD FO SR Standard: EN ISO 20345:2022 Toe cap: Fiberglass Puncture protection: Non-metallic Upper: Breathable textile Outsole: Oil- and fuel-resistant (FO), slip-resistant (SR) Additional features: ENERGY FOAM, ROLLCAGE™, STEP-RELEASE™ Package Includes 1 x Pair of Milwaukee Flextred S1PS BOA Safety Shoes, Size 47..