Your Cart

DeWalt Millington Brown Rigger Boots, Size 45, DWF50202-104-11

DeWalt Millington Brown Rigger Boots, Size 45, DWF50202-104-11
DeWalt Millington Brown Rigger Boots, Size 45, DWF50202-104-11
Second hand Label -14%
DeWalt Millington Brown Rigger Boots, Size 45, DWF50202-104-11
DeWalt Millington Brown Rigger Boots, Size 45, DWF50202-104-11
Technical specifications:
  • Model: DeWalt Millington Brown
  • Order number: DWF50202-104-11
  • Size: EU 45 (UK 11)
  • Type: Rigger boot, no laces
  • Classification: S3 WR HRO SRA
  • Standard: EN ISO 20345:2011
  • Toe cap: Composite, non-metallic
  • Underfoot protection: Non-metallic anti-penetration midsole
  • Upper: Brown nubuck, waterproof breathable lining
  • Outsole: Dual-density PU/rubber, to 300 °C (HRO)
Categories: Workwear , Working shoes
DeWalt Millington Brown Rigger Boots, Size 45, DWF50202-104-11
-14%
107.00€
124.77€
Ex Tax: 89.17€
  • Stock: In Stock
  • Brand: Dewalt
  • SKU:

    DWF50202-104-11

Магазин Младост
0 бр.
Магазин Слатина
1 бр.
Склад
0 бр.

Buy with

13 x €9.51

15 days right of return15 days right of return
Preview before paymentPreview before payment
Official distributorOfficial distributor
Secure online paymentSecure online payment

DeWalt Millington Brown Rigger Boots, Size 45 (UK 11), DWF50202-104-11

DeWalt Millington Brown (order number DWF50202-104-11) is a rigger-style safety boot in EU size 45, which corresponds to UK 11. It is classified S3 WR HRO SRA to EN ISO 20345. A rigger boot has no laces at all - it is pulled on and off by the two loops at the top of the shaft, which matters on sites where boots come off and go back on several times a day.

Fully non-metallic construction

The Millington is 100% non-metallic: the toe cap is composite and the anti-penetration midsole is non-metallic as well. That has three practical consequences. The boot is noticeably lighter than its steel equivalent at the same protection rating. It creates no cold bridge - a steel toe cap conducts outside cold straight to your toes, and in winter you feel that within the first hour. And it will not set off metal detectors, which matters at airports, in plants that screen for metal, and around sensitive instrumentation.

Upper and waterproofing

The upper is brown nubuck leather with a tall shaft that covers the ankle and the lower calf. Inside sits a waterproof breathable lining. The membrane works in both directions - it keeps water out while letting perspiration vapour escape - and this is exactly what separates a genuinely waterproof boot from a merely treated one, where your foot ends up damp from its own moisture after a few hours. An anti-scuff toe guard sits over the toe area and takes the abrasion from kneeling and from pushing material with the front of the boot, which is where nubuck otherwise wears through first.

Outsole and heat resistance

The outsole is dual-density PU/rubber. The polyurethane midlayer does the cushioning while the rubber outer layer absorbs the wear and delivers the grip. The HRO marking in the classification means tested resistance to contact heat up to 300 °C - relevant around hot asphalt, welding bays and roofing membranes. The tread is deeply cleated with a defined heel.

Rigger versus laced boot

Choosing between the two is not a matter of taste. A rigger goes on in seconds and has no laces to snag or come undone, which is why it is the default in the oil industry, on scaffolding, in agriculture and anywhere people step in and out repeatedly. The trade-off is that the fit cannot be adjusted: the boot has to suit your calf and your instep as it comes. If you have a high instep or a fuller calf, a laced model gives you more room to work with.

Choosing your size

The order number ends with the UK size and the European size is that number plus 34 - so UK 11 is EU 45. Trying rigger boots on matters more than with a laced model, because there is no way to tighten the fit afterwards. Try them in the afternoon, when your foot has swollen slightly, and with the socks you actually work in: a composite toe cap does not give, and pressure across the toes will not break in with wear.

Who they are for

The Millington is aimed at construction and installation crews, plant and machinery operators, warehouse and transport work, utilities and agriculture - anywhere you stand and walk all day, the ground is wet, and a dropped object or a nail underfoot is a real risk. Safety footwear remains the cheapest piece of personal protective equipment relative to what it prevents: crushed toes and puncture wounds are injuries measured in months of recovery.

Technical specifications

Model DeWalt Millington Brown
Order number DWF50202-104-11
Type Rigger boot, no laces
Size EU 45 (UK 11)
Classification S3 WR HRO SRA
Standard EN ISO 20345:2011
Toe cap Composite, non-metallic
Underfoot protection Non-metallic anti-penetration midsole
Metal content None - 100% non-metallic construction
Upper Brown nubuck with anti-scuff toe guard
Lining Waterproof and breathable
Outsole Dual-density PU/rubber
Outsole heat resistance Contact heat to 300 °C (HRO)
Insole PU comfort insole
Colour Brown

Questions and Answers

What size are these boots?

Order number DWF50202-104-11 corresponds to UK 11, which is EU 45. The number after the final hyphen is the UK size; add 34 to get the European size.

What does the S3 WR HRO classification mean?

S3 denotes safety footwear with a toe cap, an anti-penetration midsole, antistatic properties, energy absorption in the heel and a water-resistant upper. WR adds a whole-boot water resistance rating, and HRO means the outsole is tested against contact heat up to 300 °C.

Is there any metal in the construction?

No. The toe cap is composite and the midsole is non-metallic, so the boot is 100% non-metallic. That makes it lighter than its steel equivalent, stops cold conducting through to your toes, and means it will not trigger metal detectors.

What is a rigger boot and how is it different?

A rigger is a laceless boot with a tall shaft and two pull-on loops. The advantages are speed and having no laces to snag or come undone. The limitation is that the fit cannot be adjusted, so the size has to be right from the start.

Are they genuinely waterproof?

Yes - the nubuck upper is backed by a waterproof breathable lining and carries the WR rating. That does not make the boot submersible, though: water above the top of the shaft will come in over the rim regardless of the membrane.

Are they suitable for all-day wear?

Yes. The polyurethane insole and the cushioning midlayer of the outsole absorb the load from standing and walking on hard floors. The non-metallic construction cuts the weight further, which is very noticeable by the end of a shift.

Can they be worn in winter?

Yes. The tall shaft covers the ankle, the lining is waterproof, and the absence of a steel toe cap removes the cold bridge to your toes. The model is not thermally insulated, however - for prolonged work in hard frost, pair it with a thicker wool sock.

Write a review

Note: HTML is not translated!
Rating
Bad Good

The delivery of each order is carried out on the territory of the Republic of Bulgaria with the courier company "ECONT EXPRESS" Ltd. and can be to their office or to an address specified by the client. The products are in their original packaging from the manufacturer. Each order includes the option: Preview and test before payment.

Free shipping

Toolsbox.bg offers its customers free shipping for all orders with total value over 76 € and weight up to 20 kg, excluding oversized products (ladders, scaffolding, generators)., to the Econt office for Bulgaria specified by the client!

Delivery time

The delivery time, to the address or to the office of the courier company, is from 1 to 3 (three) working days from the date on which the order was received and confirmed. If certain circumstances require a delay in the specified delivery times, we will notify you in a timely manner.

Deliveries are made every weekday from 9:00 to 18:00 and until 13:00 on Saturday. No deliveries are made on Sundays or public holidays.

The customer can track their shipment with their waybill number at: https://www.econt.com/services/track-shipment

Delivery cost

For all orders up to €76, over 20 kg or containing an oversized product (ladders, scaffolding, generators), a delivery fee is charged to the courier company. The delivery cost is formed depending on the dimensions and weight of the shipment, as well as your location.

We wish you a pleasant shopping!
The Toolsbox.bg team