Consumables for tools - Page 65

Spare Erasers for Pica Fine Dry, 5 Pieces - 55802 Pica 55802 is a set of 5 spare erasers for the Pica Fine Dry automatic pencil. The Fine Dry has a large integrated eraser for quick corrections, and this set lets you replace it once it wears out. The erasers come in a clear OPP poly bag with a hanging tab. Which pencil they fit The erasers are intended for the Pica Fine Dry (art. 7070) - an automatic pencil with a lead diameter of only 0.9 mm for fine and precise marking without sharpening. The manufacturer describes it with a push mechanism for automatic lead feed in a stainless steel tube, a practical holster of sturdy plastic with a special clip for one-hand operation, effective dust and moisture protection and a shaft with a roll stop. The large integrated eraser is one of its key features. Packaging Each bag contains 5 spare erasers. For retailers Pica supplies the bags hung on a clip strip with a metal hook - 10 bags per strip, for space-saving presentation in the shop. Refill leads for Fine Dry Besides the erasers, the manufacturer offers refill leads for the Fine Dry, 60 mm long and 0.9 mm in diameter: HB (7030) and H (7050) in packs of 24 - for most surfaces and for highest precision - and coloured red (7031) and white (7032) leads in packs of 12 for dark surfaces. A Fine Dry pencil comes loaded with 5 HB leads. According to the manufacturer all Fine Dry refills are temperature-resistant up to 70 °C. When a spare eraser is needed The integrated eraser of the Fine Dry is intended for quick corrections of the marking. The spare set extends the life of the pencil: when the eraser wears out, it is replaced with a new one from the bag, and the tool itself stays in use. Technical specifications ManufacturerPica-Marker (PICA) Article55802 EAN4260056159541 TypeSpare erasers Quantity5 erasers per bag For pencilPica Fine Dry (art. 7070), Ø 0.9 mm lead PackagingClear OPP poly bag with hanging tab Retail presentationClip strip with metal hook, 10 bags per strip Questions and Answers Which pencil are these erasers for? For the Pica Fine Dry automatic pencil (art. 7070) with a 0.9 mm lead. The Fine Dry has a large integrated eraser that can be replaced with this set. How many erasers are in the pack? One bag holds 5 spare erasers. The manufacturer packs them in a clear OPP poly bag with a hanging tab. Do they fit other Pica pencils? The manufacturer lists them as spare erasers for the Pica Fine Dry. Pica's data does not state compatibility with other models. Which refill leads are available for the Fine Dry? HB (7030) and H (7050) in packs of 24, plus coloured red (7031) and white (7032) leads in packs of 12 for dark surfaces. All are 0.9 mm in diameter and 60 mm long. How many leads does the pencil itself come with? According to the manufacturer the Pica Fine Dry comes loaded with 5 HB leads. Erasers and refill leads are bought separately. What are the key features of the Fine Dry? A push mechanism for automatic lead feed, a large integrated eraser, an ergonomic grip zone, dust and moisture protection and one-hand operation thanks to the holster with a special clip. What is the article number? The spare erasers for the Pica Fine Dry are article 55802, EAN 4260056159541. ..

Carbon steel blade • Patented induction edge hardening • 100% longer service life than standard blades • Improved safety • Special heat treatment of the blade body • Increased elasticity of the blade body ..

Designed for cutting paper, cardboard, leather, and other sheet materials • Blade thickness: 0.45 mm. Trapezoidal, pack of 5. ..

Designed for cutting sheet materials, such as flooring and roofing materials and plastic sheets. Pointed hook-shaped profile. Trapezoidal hook-shaped, pack of 5. ..

STANLEY 1-TRA204T Staples, type A, 6 mm STANLEY 1-TRA204T are hand tacker staples of type A with a leg length of 6 mm. The manufacturer classifies them as light-duty: thinner wire for work around the home and for craft and hobbies - fastening paper, card, fabrics and thin plastics. In this shop, type A is also listed as A53. The size is the whole product With staples the number in the article means one thing only - the leg length. For 1-TRA204T it is 6 mm. The crown (width) across this range is 11.4 mm according to the manufacturer and is the same for every length, which is why one tool accepts the whole range and the length is chosen to suit the material thickness. Galvanised coating The staples are steel with a galvanized zinc-aluminium coating. The coating slows corrosion, which matters when fixing insulation, netting and upholstery in damp rooms, and on materials that will later be painted or plastered over. Choosing the length The rule is that the leg should enter the substrate by at least two thirds of its length. Thin upholstery fabric on a timber frame needs 6-8 mm; wire netting, insulation and thicker sheet materials call for 10-12 mm. Longer is not always better - in a thin substrate the leg simply comes out the other side. Manufacturer's packaging Article 1-TRA204T is a box of 1000 staples in a plastic casing. STANLEY marks staple packaging with a colour code so that the compatible tackers can be identified on the spot. Applications Used in timber and joinery work, upholstery, fixing insulation sheet, netting, paper and film, in packing and in making crates and frames - wherever a type A hand tacker is in use. Technical specifications Article1-TRA204T Staple typeType A (also listed as A53) DutyLight-duty Leg length6 mm Crown width11.4 mm MaterialSteel CoatingGalvanized zinc-aluminium Pieces in the manufacturer's pack1000 PackagingPlastic casing Colour-coded packagingYes EAN3253561053887 Questions and Answers What is the leg length? The leg of 1-TRA204T is 6 mm. That is the only thing the number in the article means - the crown width across the whole range is the same, 11.4 mm according to the manufacturer. What does type A mean? Type A is STANLEY's light duty - thinner wire for home and hobby work: paper, card, fabrics and thin plastics. In this shop the type is also listed as A53. Which tacker takes these staples? The staples are type A. STANLEY colour-codes the packaging precisely so the compatible tackers can be identified on the spot. Before buying, check the type marked on your tacker or given in its manual. How is the length chosen? The rule is that the leg should enter the substrate by at least two thirds of its length. Thin upholstery fabric on a timber frame needs 6-8 mm, while netting, insulation and thicker sheet material call for 10-12 mm. Do they rust? The staples are steel with a galvanized zinc-aluminium coating that slows corrosion. That matters when fixing insulation and netting in damp rooms and on materials that will later be painted. How many are in the manufacturer's pack? Article 1-TRA204T is a box of 1000 staples in a plastic casing according to STANLEY. Are the same staples available in other lengths? Yes. The range covers several leg lengths at the same crown width, so one tacker works with the whole range. Other lengths of the same type are stocked in the shop. ..

Stanley 1-TRA705T Cable ClampsDescription:Stanley 1-TRA705T staple clips are ideal for securing cables or other light-duty household applications. They feature arectangular shape that protects cables from damage while ensuring a secure hold. The clamps are galvanized, making them corrosion-resistant and suitable for long-term use in various conditions. An excellent choice for professional or home installations, ensuring reliable fastening and protection of cables.Technical specifications:Type: G / 11Feature: GalvanizedLength: 8 mmWidth: 10.6 mmThickness: 1.25 mmQuantity per package: 1000 pcs..

Stanley 1-TRA706T Cable ClampsDescription:Stanley 1-TRA706T staple clips are ideal for securing cables or other light-duty household applications. They feature arectangular shape that protects cables from damage while ensuring a secure hold. The clamps are galvanized, making them corrosion-resistant and suitable for long-term use in various conditions. An excellent choice for professional or home installations, ensuring reliable fastening and protection of cables.Technical specifications:Type: G / 11Feature: GalvanizedLength: 10 mmWidth: 10.6 mmThickness: 1.25 mmQuantity per package: 1000 pcs..