Cleaning equipment - Page 2

Dewalt DCMPW1600N Pressure WasherDescription: The Dewalt DCMPW1600N cordless pressure washer operates at 18 + 18 V and delivers a flow rate of 273 liters per hour at a maximum pressure of 110 bar. Equipped with a brushless motor, it ensures extended runtime and durability. The self-priming function is a practical solution that allows the device to draw water from buckets or water tanks, providing convenience and flexibility during operation. The rubber wheels facilitate transport of the pressure washer, ensuring maneuverability and stability. The set includes a 6-meter suction hose and additional accessories that allow water to be drawn from buckets, ponds, or other nearby water sources, increasing flexibility of use. Ships without a battery or charger!Technical specifications:Voltage: 18 + 18 V Operating pressure: 70, 80, and 110 barMaximum flow rate: 273 L/hWater temperature: 60°Hose length: 6 mWeight: 16.1 kgIncluded:1 x Spray gun1 x Inlet filter1 x Adjustable nozzle1 x Turbo/rotating nozzle1 x 0.6 L foam bottle1 x 6 m high-pressure hose1 x Set of self-priming hoses, 3 m1 x Universal garden hose adapter1 x Nozzle tip cleaning pin https://youtu.be/uBekxaWnGEA?si=RRsa_LsGmjdZ1KO-..

DeWalt DCMPW1000N-XJ Cordless Pressure Washer, 54 V XR FLEXVOLT The DeWalt DCMPW1000N-XJ is a cordless pressure washer on the 54 V XR FLEXVOLT platform with a BL48 brushless motor and a three-piston axial pump. It ships without battery or charger. Working pressure comes in two steps - 45 bar and 69 bar - at a flow rate of up to 220 litres per hour. Works without a mains water supply This is the key difference from an ordinary pressure washer. The machine draws water from a container - a bucket, drum, barrel, tank or even directly from a lake or river - through the supplied 6-metre suction hose. Neither mains power nor a water connection is required, which makes it usable where a conventional washer simply cannot work. Two pressure settings The low setting of 45 bar suits washing a car, a bicycle, garden furniture and anything where higher pressure would damage paint or seals. The high setting of 69 bar handles heavily soiled surfaces - mud on plant, deposits on concrete, dried mortar on tools. What it can and cannot do It is worth being clear about the limits. Mains-powered domestic washers typically run at 100 - 150 bar, more than double this. This machine does not replace them for daily cleaning of large areas, paving and facades. Its strength lies elsewhere - where there is neither power nor a tap, and machinery, tools, boots or a vehicle need washing. A container of water and one battery turn any point on site into a washing station. Attachments supplied Supplied with an adjustable nozzle for changing the spray angle, a turbo nozzle for a concentrated rotating jet on stubborn dirt, a 0.5 l detergent bottle for applying foam, a hose adapter, a shoulder strap and a mesh bag for the accessories. Runtime With an XR FLEXVOLT 9 Ah battery the machine runs for up to 60 minutes. As a pressure washer draws heavily, battery capacity directly determines how much area you will clean - with smaller packs the time falls accordingly. Who it is for The machine is aimed at construction and installation crews, agricultural and forestry operations, mobile vehicle servicing, and people involved in hunting, camping, cycling and off-road vehicles. What these have in common is that the dirt appears where there is no infrastructure. Technical specifications ModelDCMPW1000N-XJ PlatformDeWalt 54 V XR FLEXVOLT MotorBL48 brushless PumpThree-piston axial Working pressure45 bar (low) / 69 bar (high) Flow rateup to 220 l/h Water supplySuction from a container, no mains needed Suction hose6 m, included Runtimeup to 60 min with a 9 Ah battery NozzlesAdjustable and turbo Detergent bottle0.5 l SuppliedWithout battery and without charger What's in the box 1 x DeWalt DCMPW1000N pressure washer 6 m suction hose Adjustable nozzle Turbo nozzle 0.5 l detergent bottle Hose adapter Shoulder strap Mesh bag Without battery and without charger Questions and Answers Does it need a mains water connection? No. The machine draws water straight from a container through the supplied 6-metre suction hose - a bucket, drum, barrel or a natural water source. That is its main advantage: it works on site, in a forest, on a beach or in a car park where there is neither a tap nor a socket. What pressure does it produce? Two settings - 45 bar low and 69 bar high. For comparison, mains-powered domestic washers usually deliver 100 - 150 bar. This machine is not a substitute for a mains washer on heavy cleaning; it is a solution for places without power and water. Is a battery included? No. The "N" denotes a tool-only delivery. It runs on DeWalt XR FLEXVOLT 54 V batteries. As current draw is high, a large-capacity pack is advisable - with a 9 Ah battery runtime reaches 60 minutes. Can it be used to wash a car? Yes, and the low 45 bar setting is intended for exactly this - enough to rinse off mud and dust without risk to paint and seals. The 0.5 l detergent bottle allows foam to be applied before rinsing. What is the turbo nozzle for? It spins a concentrated jet in a circle, combining the force of a pencil jet with the coverage of a fan. It is used on stubborn deposits - dried mortar, mud on tyres and running gear, moss on concrete - where an ordinary nozzle will not shift them. How long does it run on one charge? Up to 60 minutes with an XR FLEXVOLT 9 Ah battery. With smaller capacity the time falls proportionally. If the machine will be used regularly, a second battery is effectively essential, since charging takes longer than discharging. Who is it suitable for? For construction and installation crews washing tools and plant on site, for farms and forestry, for camping and hunting, for cleaning bicycles and ATVs after a trip, and for maintaining sites with no power or water. It is not intended for daily heavy cleani..

DeWALT DWH050Features: The DeWALT dust extraction and hole cleaning system is the ideal tool for cleaning holes with a diameter of 52 mm and unlimited length during drilling or other repair work. Compatible with all professional dust collectors, it attaches to a flat surface and, thanks to its durable rubber seal, adheres to most masonry surfaces. The innovative trigger design allows for full control of the application, while the ergonomic design with a rubber grip improves user comfort. It features interchangeable drill bits for optimal dust removal, a steel belt hook, and a magnetic bit holder for compact storage. The lithium-ion battery packs, part of the intelligent XR lithium-ion series designed for efficiency and faster operation, allow for easy insertion and removal with a charge status indicator. Lighting for your workspace is provided by a 3-position LED flashlight with High/Medium/Low settings and a 20-minute high-power LED delay.Included in the set:2-hole cleaning nozzles2 x interchangeable drill bitshttps://www.youtube.com/watch?v=ZJ3PG3k87RI&ab;_channel=DEWALTTV..

Draper 20515 Electric Vacuum CleanerDescription: The Draper 20515 wet and dry vacuum cleaner is a wet and dry vacuum cleaner with a 20 -liter stainless steel tank, operating at a power of 1250W . Designed for convenience and maneuverability, it features an approximately 5 -meter power cord and a 1.5-meter suction hose. It is additionally equipped with a built-in tool storage compartment, wheels for easy movement, and a comfortable carrying handle. It comes with a variety of accessories for easy cleaning of your home, garage, and anywhere you have access to electricity. Technical specifications:Power: 1250 W Maximum airflow: 25 l/sSuction power: 15 kPaTank capacity: 20 l Cable length: 5 mHose length: 1.5 mWeight: 4.6 kg Included:3 x 345 mm plastic tubes1 x 1.5 m suction hose 1 x Foam filter 1 x Dual-action floor brush 1 x Cloth filter1 x Crevice tool1 x Dust bag..

DeWALT DWE46225 Dust Collector GuardDescription: The DeWALT DWE46225 Dust Collector Guard is a high-quality tool designed for use with 125 mm angle grinders, as well as with the DCG4610T2 cordless wall chaser. It is equipped with a steel base, ensuring greater durability and a long service life. This functional tool allows for comfortable, dust-free work on concrete and masonry. Technical Specifications:Diameter: 125 mmCompatible with: DCG4610T2, 125 mm angle grindersWeight: 0.750 kg..

D25304DH Dust CollectorDescription: The DeWalt D25304DH hammer drill dust collector is equipped with a powerful motor that ensures effective suction and high drilling performance. The 2-second delay shut-off feature ensures that all dust is completely extracted from the telescopic hose. It features a transparent and durable high-capacity dust bin and a replaceable HEPA filter for reliable capture of fine particles. It is suitable for drill bits up to 26 mm and allows for drilling depths of up to 180 mm. It is compatible with models D25333, D25334, DCH283, DCH333, DCH333X2, and DCH334. Technical specifications:Drill bit diameter: ⌀26 mmMaximum drilling length: 250 mmMaximum drilling depth: 180 mmCompatible with: D25333, D25334, DCH283, DCH333, DCH333X2, and DCH334Dimensions (L x W x H): 136 x 296 x 440 mmWeight: 1.4 kg..

Makita 421342-3 Dust Extractor Cup for HR2010 / HR1800The Makita 421342-3 is a rubber dust extraction cup designed to collect dust and debris during drilling operations. It fits over the drill bit and helps prevent dust from spreading around the work area, making it especially useful for overhead drilling and indoor applications.Suitable for drill bits with diameters ranging from Ø6 mm to Ø14.5 mm, the dust cup is compatible with Makita HR1800, HR2010, and other compatible Makita rotary hammers.Technical Specifications Type: Dust extractor cup / dust collection cap Application: Dust collection during drilling Suitable drill bit diameter: Ø6 – Ø14.5 mm Compatible models: Makita HR1800, HR2010, and other compatible Makita rotary hammers Material: Rubber Features and Benefits Helps reduce dust dispersion during drilling Keeps the work area cleaner Ideal for overhead drilling applications Quick and easy installation on the drill bit Genuine Makita accessory Package Includes 1 pc. Makita 421342-3 dust extractor cup..

Dust collector for core drilling and core sampling with a range of ø 6-72 mm. Select to improve dust removal and extraction. For core drilling, the brushes can be replaced. Pipe outlet: 37 mm outer diameter / 32 mm inner diameter. Replaceable sealing lips (2 pcs.): 4931448564. Spare brush: 4931448565..

Kärcher RM 618 Insect RemoverKärcher RM 618 62957610 is a 500 ml insect cleaner designed for cleaning exterior car surfaces. It is suitable for removing insect deposits from paint, radiator grilles, exterior mirrors, panels, metal, chrome, and plastic.Practical ApplicationThe product is designed for car maintenance after long trips or during seasonal insect buildup. The formula is described as gentle on paint and decorative elements, and in regional official listings, it is also described as fast-acting.Technical dataThe product code is 62957610, and the product number is 6.295-761.0. The weight is 0.5 kg, and with packaging-0.7 kg. The dimensions are 70 x 70 x 270 mm. The set includes 1 bottle of 500 ml. According to official data, the packaging unit is 8 pieces.A suitable choice for pre-wash cleaning before washing the car...

Karcher 6.296-106.0 Interior CleanerDescription: Karcher RM 651 interior cleaning solution is effective at removing various types of dirt, such as fingerprints, grease films, food and drink residues, and sunscreen marks. In addition, it controls unpleasant odors, refreshes colors and fabrics, and makes future surface cleaning easier by reducing the frequency of re-soiling. The product is ready-to-use and comes with a convenient spray bottle that ensures even and wide coverage with low consumption. It has a pleasant and fresh citrus scent and is surface-biodegradable, in accordance with the standards of the Organization for Economic Cooperation and Development (OECD). It is manufactured in Germany, ensuring high quality and reliability. Technical specifications:Capacity: 0.5 LWeight including packaging: 0.553 kgDimensions (L x W x H): 80 x 80 x 280 mm..

Kärcher EasyFix Microfibre Cloth Set for Bathrooms, 28632660 Kärcher 2.863-266.0 is a 4-part microfibre cloth set for bathrooms, for SC series steam cleaners with the EasyFix floor nozzle. It contains two floor cloths, an abrasive cover for the hand nozzle and a polishing cloth. What is in the set The two floor cloths attach to the EasyFix floor nozzle by hook-and-loop - you simply press the nozzle onto them. The cloth wraps the nozzle on all sides, which matters at corners, edges and behind the toilet, where a flat cloth does not reach. The abrasive cover for the hand nozzle is two-layered: abrasive fibres for limescale and soap residue, and a soft microfibre section that picks up what has been loosened. This is the cloth for the shower cubicle, the bath and the fittings. The polishing cloth is 70% polyester and 30% polyamide, made for mirrors and smooth surfaces - it polishes streak-free and absorbs a lot of water. The strap that keeps your hands clean The floor cloths have a base strap. To change one you stand on the strap and pull the nozzle up and away - the cloth comes off by itself and your hand never touches the dirty side. In a bathroom, where the cloth collects precisely what you do not want on your hands, that is no small extra. Care - the rule that matters The cloths are machine washable up to 60 °C, but without fabric softener. Softener coats the microfibre fibres in a thin film that blocks their capillaries - the cloth stops picking dirt up and starts smearing it around instead. A microfibre cloth washed with softener does not recover. Compatibility The set fits the SC 1 Multi, SC 2, SC 3, SC 4 and SC 5 steam cleaners, including the Deluxe versions and the models with an iron. The condition is that the floor nozzle is EasyFix. Technical specifications ManufacturerKärcher Article number2.863-266.0 / 28632660 TypeMicrofibre cloth set for bathrooms Pieces4 Contents2 floor cloths, abrasive cover, polishing cloth AttachmentEasyFix, hook-and-loop Polishing cloth composition70% polyester, 30% polyamide ColourWhite Dimensions345 x 112 x 18 mm Weight0.1 kg WashingUp to 60 °C, no fabric softener CompatibilitySC 1 Multi, SC 2, SC 3, SC 4, SC 5 and Deluxe versions Questions and Answers What does the set contain? Four pieces: two microfibre cloths for the EasyFix floor nozzle, an abrasive cover for the hand nozzle and a polishing cloth for mirrors and smooth surfaces. Can they be washed with fabric softener? No. Softener coats the microfibre in a film that blocks its capillaries - the cloth stops picking dirt up and starts smearing it. Wash up to 60 °C without softener. Which machines does it fit? The SC 1 Multi, SC 2, SC 3, SC 4 and SC 5 steam cleaners, including the Deluxe versions and the iron models. The floor nozzle has to be EasyFix. What does the abrasive cover do? It is two-layered: abrasive fibres take off limescale and soap residue, and the soft microfibre section collects what has been loosened. It is the cloth for the shower cubicle, bath and fittings. How do I remove the cloth without getting dirty? The cloths have a base strap. Stand on it and pull the nozzle up and away - the cloth releases itself and your hand never touches the dirty side. Does the cloth slip during use? No - it attaches by hook-and-loop across the whole face of the nozzle. It also wraps the nozzle on all sides, which helps at corners, edges and hard-to-reach spots. Why is the polishing cloth separate? Because it is a different fabric - 70% polyester, 30% polyamide, optimised for streak-free polishing and high water absorption. A cloth you have scrubbed grout with will leave marks on a mirror. ..

Karcher 6.296-108.0 Polishing and Waxing CompoundDescription:Karcher RM 660 Polishing and Waxing Agent offers a dual action-treating and protecting your car's paint in a single step. This product is specially formulated to remove fine scratches, such as those caused by car wash brushes, while simultaneously protecting the paint from external influences. Its special ingredients not only protect the paint but also accelerate drying and ensure brilliant results. The product refreshes the car's color and adds shine without leaving unwanted holograms. Special substances maintain the durability of the vehicle's surface and repel water and dirt particles. With a pleasant and fresh citrus scent, this product is ready to use and contains no microplastics. It is manufactured in Germany, ensuring high quality and reliability. Technical specifications:Package quantity: 500 mlWeight including packaging: 0.604 kgDimensions (L x W x H): 70 x 70 x 180 mm..

Karcher 6.296-048.0 Wheel CleanerDescription:Karcher RM 667 Premium Wheel Cleaner is designed to remove brake pad residue, rubber, road salt, as well as snow and slush without damaging surfaces. Thanks to its acid-free formula, it is extremely gentle on materials. The cleaner works quickly and effectively, reaching even the smallest and tightest corners of the wheels. With a short processing time, it is ideal for quickly cleaning your vehicle. For your convenience, the product features an effectiveness indicator. As the color changes from red to another color, you can see how the product works over time. Ready to use, this product is easy to apply and is surface biodegradable, in accordance with OECD standards. Technical specifications:Package quantity: 500 mlWeight including packaging: 0.613 kgDimensions (L x W x H): 70 x 100 x 245 mm..

Makita CLX245SAX1 Cleaning Machine SetThe Makita cordless cleaning machine set includes:Makita CL108D Cordless Vacuum Cleaner - 12Vmax CXT Li-IonMakita UB100DZ Cordless Blower - 12Vmax CXT Li-IonMakita 12V/2.0Ah CXT Li-Ion batteryMakita chargerStorage bagMakita CL108D Cordless Vacuum Cleaner - 12Vmax CXT Li-Ion The high-quality Makita CL108D vacuum cleaner features a suction power of 4.4 kPa . Lightweight and ideal for cleaning furniture, floors, cars, and all hard-to-reach areas. Unlike standard models, the Makita vacuum cleaner is extremely compact, and the entire body of the machine is integrated into the handle itself, eliminating the need for cumbersome dragging. It features 3 speed settings with an easy-to-use button for selection. A built-in LED light illuminates the surfaces being cleaned. Specifications:Battery: Li-IonBattery voltage: 10.8-12 V max CXTMaximum airflow: 1.2 m3/minTank capacity: 0.6 LDimensions (LxWxH): 956x110x150 mmWeight: 1.2 kgMakita UB100DZ Cordless Blower - 12Vmax CXT Li-IonMakita 's innovative cordless blower features 3 air pressure settings-low, medium, and high. It is powered by 10.8-12Vmax CXT Li-Ion batteries and features smooth pressure adjustment. It is equipped with a trigger for speed control, as well as a battery protection system against complete discharge, overheating, and overload. Compact and lightweight design with an ergonomic handle featuring a soft rubber grip, ensuring more comfortable operation and greater control. A major advantage is that it can also be used as a vacuum cleaner with a dust bag. Specifications: - Battery: Li-Ion - Battery voltage: 10.8-12 V max CXT Li-Ion - Maximum airflow: 2.6 m3/min - Maximum air velocity: 75 m/s - Maximum air pressure: 4.0 kPa - Length: 508 mm - Weight: 1.4 kg *The total weight of the kit is 4 kg. *Warranty: 3 years, after registration..

Makita DVC156LZ Cordless Dry VacuumDescription: The Makita DVC156LZ Cordless Dry Vacuum Cleaner is a reliable solution for cordless dry cleaning with quiet operation. This model is designed for dry cleaning and is suitable for various tasks at home or in the workplace. Equipped with a brushless motor that provides greater power and a longer service life for the appliance. This type of motor also ensures lower energy consumption and a lower noise level, below 56 dB , which is extremely useful for working in sensitive environments. The special ExtremeProtection technology adds enhanced dust protection, safeguarding the vacuum cleaner's internal components. The DVC866LZX1 's floor brush is thinner and swiveling, allowing for greater maneuverability and access to hard-to-reach areas. With a large power switch, the vacuum cleaner is convenient and easy to use. Ships without a battery or charger. Technical specifications:Voltage: 18 + 18 VBattery type: Li-IonRun time: 100 minSpeed settings: 1Airflow: 2100 l/min (126 m3/h) Suction power: 11 kPa Container volume: 15 l Noise level: 70 dB Dimensions (L x W x H): 366 x 334 x 368 mm Weight: 8 kgIncluded:1 x Flexible hose, 38 mm diameter, 2.5 m 1 x Straight pipe1 x Curved pipe1 x Narrow nozzle1 x Nozzle for wet and dry floor cleaning10 x Nylon bags..

Makita DHW180Z Cordless Pressure Washer, LXT 18 V, 24 bar The Makita DHW180Z is a cordless pressure washer on the LXT 18 V platform with a maximum pressure of 24 bar and a flow rate of 5.3 l/min. The "Z" suffix denotes delivery without battery or charger. The tool is gun-shaped with a telescopic lance and weighs just 2.0 kg without a battery. Runs from a bucket, not a tap The machine is self-priming and lifts water from up to 2 metres - from a bucket, drum, barrel or natural water source. That is exactly what makes it usable where there is neither tap nor socket: a car park, a site, a campsite, a stable, a boat. The supplied hose is 6 metres long, giving freedom of movement around the water container. What 24 bar can do The figure needs to be read correctly. Mains-powered domestic washers work at 100 - 150 bar; this machine is in a different category. It is made for rinsing and washing off, not for shifting ingrained dirt: bicycles, motorcycles, ATVs, boats, garden furniture, tools, muddy boots and a dog's paws. Deposits on concrete and facade cleaning call for entirely different pressures. 5-in-1 nozzle and two speeds The nozzle offers five spray patterns - from a concentrated jet to a wide fan - changed by twisting, without removing it. Electronic two-speed selection allows the flow to be reduced on more delicate surfaces and to save water. Runtime With a 5.0 Ah battery the machine runs for between 30 and 83 minutes depending on the speed selected, and with a 3.0 Ah pack between 18 and 50 minutes. The wide range comes from the setting: on low speed the draw is considerably lower. Who it is for The tool is aimed at people washing smaller equipment away from home - cyclists and motorcyclists, hunters and anglers, boat and caravan owners, livestock keepers. It is useful on site too, for washing tools and boots. At 2 kg and running on an ordinary LXT battery, it is carried in one hand and set up in a minute. Technical specifications ModelDHW180Z PlatformMakita LXT, 18 V Maximum pressure24 bar Working range8 - 24 bar Water flow rate5.3 l/min Max water temperature40 °C Suction liftup to 2 m Hose6 m Nozzle5-in-1 Speeds2, electronic selection Weight2.0 kg (without battery) Runtime30 - 83 min with a 5.0 Ah battery SuppliedWithout battery and without charger Equipment 1 x Makita DHW180 pressure washer Pressure hose, 6 m 5-in-1 nozzle Suction hose with filter Without battery and without charger Questions and Answers Does it need a mains water connection? No. The machine is self-priming and lifts water from a container up to 2 metres below - a bucket, drum, barrel or natural water source. It can also run from a tap, but independence from mains water is its main advantage. Is 24 bar enough? It depends on the job. For rinsing off mud, dust and sand - yes. For ingrained dirt, deposits on concrete, moss and facades - no; those need 100 bar and above, which mains machines provide. This washer does not replace them; it covers the cases they simply cannot reach. Is a battery included? No. The "Z" at the end of the model means the tool only. It runs on any battery from the Makita LXT 18 V platform. For longer sessions a 5.0 Ah pack or larger is advisable. How long does it run on one charge? Between 30 and 83 minutes with a 5.0 Ah battery, and 18 to 50 minutes with a 3.0 Ah one. The wide spread comes from the speed selected - on the low setting the draw is much lower, and for rinsing that is usually enough. What water can it draw? Clean water up to 40 °C. The suction hose has a filter that holds back coarse particles, but heavily silted water wears the pump. When drawing from a lake or river the filter should be checked regularly. What does the 5-in-1 nozzle do? It combines five spray patterns in one tip, switched by twisting - from a concentrated pencil jet to a wide fan. There is no need to carry and swap separate nozzles, and the pattern changes on the move to suit the surface. Can it wash a car? Yes, and the low pressure is an advantage - no risk to paint or seals. The 5.3 l/min flow does mean a whole car takes more time and water than with a mains machine. For a bicycle, motorcycle or ATV it is entirely appropriate. ..

Milwaukee M18 FDDEC-0 Dust CollectorDescription: The Milwaukee M18 FDDEC-0 dust collector, compatible with the Milwaukee M18 FHAC16 , is designed for effective dust collection during drilling, operating automatically by synchronizing with the tool's on/off cycle. This ensures a clean work environment and better control in professional applications. The model is equipped with a HEPA filter that captures particles of any size with up to 99.75% efficiency, ensuring a high level of filtration and health protection. The large dust collection box allows for extended operation without frequent cleaning, and the aluminum dust extraction tube is adjustable to fit the drill bit size, with a maximum diameter of 16 mm and a drilling depth of up to 100 mm. The dust collector is fully compatible with the Milwaukee M18 FHAC16 hammer drill and is suitable for precise and clean work on construction sites and during renovation projects. Technical specifications:Air volume: 28 m3/h Air flow: 466 L/minCapacity: 0.31 LFor drill bits with a diameter of: up to 16 mmDrill bit length: up to 165 mmMax. drilling depth: 75 mm..

Milwaukee 4933500140 Wet/Dry Vacuum CleanerDescription: The Milwaukee M18F2VC23LG2-0 wet/dry vacuum cleaner is a powerful solution for wet and dry cleaning, powered by 18 V batteries and capable of using two batteries simultaneously for extended runtime. The model provides strong suction with a vacuum pressure of 199 mbar and a flow rate of 196 m3/h. It is equipped with the VACLINKTM wireless system, which allows for automatic activation via a compatible tool or remote control. It features a 20-liter tank and a Class L filter capable of capturing 99.97% of particles down to 0.3 microns. The vacuum cleaner is compatible with the PACKOUTTM workbench, which can support up to 130 kg, and comes with a 2.7 m antistatic hose that is resistant to crushing and kinking. The stable mobile cart with lockable wheels facilitates transport and operation at various sites. Ships without battery and charger!Technical specifications:Voltage: 18 VVacuum pressure: 199 mbarAirflow: 3267 l/minAir volume: 196 m3/hTank capacity: 20 LFilter: HEPA H13Filter class: LHose length: 2.75 mHose diameter: 48 mmWeight: 14.9 kgIncluded accessories:Remote controlHoseFloor nozzleGrout nozzle2 extension tubesTool adapterCurved handleFilter bag https://youtu.be/74utEbRXK3s?si=TAH0pePhCXxYsows..

Versatile use - Compatible with all brands and models of SDS-Plus hammer drills. Compatible with all SDS-Plus drill bits with a total length of up to 215 mm. Captures up to 99% of airborne dust. Can be used with or without a vacuum cleaner. Compatible with all standard vacuum cleaners. Transparent sleeve for visibility and precision. Designed primarily for this attachment: https://toolsbox.bg/universalen-prahoulovitel-za-perforator-sds-plus-215mm-milwaukee-4932464916/..