Knipex 95 36 315 A Cable CutterThe Knipex 95 36 315 A is a professional cable cutter with a ratchet mechanism, designed for cutting armored steel-wire cables (SWA). It is suitable for electrical installations, industrial maintenance, and municipal work where a clean and controlled cut is required for larger cables.Key advantagesThe tool features a three-stage high-leverage ratchet drive, which reduces the force required for cutting. The cutting edges are precision-ground and induction-hardened, and the head is made of special high-quality tool steel, forged and oil-hardened for durability.The cutter is VDE-tested and complies with IEC 60900 and DIN EN 60900. The insulated multi-component handles and black-lacquered body contribute to safe and practical operation. The model allows for cutting SWA and multi-strand copper or aluminum cables up to 45 mm in diameter or 380 mm2, for example 4 x 95 mm2.Practical UseWith a length of 315 mm and a weight of approximately 800 g, the tool is convenient even in confined spaces such as distribution panels, cable trays, and junction boxes. The support area allows the tool to be rested on a surface for better stability during operation. The set includes 1 Knipex 95 36 315 A cable cutter with VDE-insulated multi-component handles...

PICA Fine Dry 7070 Deep Hole Automatic Pencil The PICA Fine Dry is an automatic pencil with a fine Ø 0.9 mm graphite lead, made for precise marking and setting out on site. Unlike the thicker Pica-Dry, this one draws a fine line and allows accurate dimensions on timber, metal, tile and paper - where a broad marker would hide the measurement itself. Why "deep hole" The tip is elongated and exposed, so the pencil reaches the bottom of a drilled hole or a narrow channel and marks inside it. An ordinary pencil cannot: the body meets the edge before the lead reaches the surface. HB hardness and length The lead is HB - the middle grade, dark enough to read and hard enough not to smudge away while the workpiece is carried. The pencil is 160 mm long, which suits a workwear pocket. Automatic feed and contents Lead advance is automatic, by pressing the button at the top - no twisting, no sharpener. Five spare leads are included, so the pencil is ready to work straight away and runs a long time before the first refill. Protective sleeve The pencil stows in a protective sleeve that guards the tip in a pocket or a bag. The tip is slender and without the sleeve it snaps on the first sharp movement. Who it is for Electricians, fitters, carpenters and anyone who marks to a dimension rather than by eye. The graphite is grey, giving a clear line on light surfaces and erasing cleanly from most materials. Technical specifications Article number7070/SB ManufacturerPICA SeriesFine Dry TypeDeep hole automatic pencil Line width0.9 mm Lead hardnessHB Lead colourGrey / graphite Length160 mm Contents5 spare leads FeedAutomatic, push button ProtectionProtective tip sleeve Questions and Answers How does it differ from Pica-Dry? The Fine Dry writes a 0.9 mm line, the Pica-Dry a 2.8 mm one. Fine Dry is for precise setting out; Pica-Dry is for bold marks meant to be seen from a distance. Are spare leads included? Yes, five spare HB leads come with the pencil. Can it mark inside a drilled hole? Yes, that is what it is for. The tip is elongated and exposed and reaches the bottom of the hole. What is the lead hardness? HB, the middle grade. Dark enough to read, and it does not smudge while the workpiece is moved. Is a sharpener needed? No. Lead advance is automatic, via the button at the top. Which surfaces does it write on? Timber, metal, tile, paper and most smooth construction materials. Is the tip protected? Yes, the pencil stows in a protective sleeve. The tip is slender and needs it when carried in a pocket. ..

Pica-Ink Deep Hole Marker, black, 150/46 Pica-Ink 150/46 is a marker for deep and hard-to-reach holes with black ink. Length 152 mm, line width 2 mm. The ink is permanent and waterproof. Supplied as 1 piece. The colour This article is black - both the ink and the body of the marker. Across the Pica-Ink 150 range the barrel colour follows the ink colour, so the variant is identified on sight rather than by testing it on the material: 150/46 is black, 150/40 red, 150/41 blue. The extended tip The tip is stainless steel, extended and adjustable. That is the whole point of the tool: an ordinary marker will not enter a hole, and even where it does, the thick barrel covers the spot so you cannot see where you are writing. The thin metal tip passes through the hole and marks the bottom. Where it is used On fixing through a finished surface: marking the structure behind a drilled hole, marking inside deep recesses, in sections, behind cladding and inside boxes. It also serves for marking in wet or oily conditions, where an ordinary pencil leaves nothing. Permanent and waterproof The ink is permanent - it does not smear on contact and does not disappear in damp. Working outdoors or in a cellar, that is essential: a mark made before the rain has to be there after it. 2 mm line width 2 mm is the compromise between visibility and precision. A finer line is lost on a rough substrate - concrete, brick, sawn timber; a thicker one will not place a point with usable accuracy. Ink or graphite The Pica deep-hole range comes in two kinds, and the choice between them is not a matter of taste. Ink markers such as this one write on smooth, wet and oily surfaces - metal, plastic, glazed tile - where graphite simply slides. The graphite versions suit dry timber, concrete and plasterboard, where the mark later has to be rubbed or sanded away. Ink is permanent: on a surface that will be seen, it can still show through a thin coat of paint. The metal tip The tip is stainless steel rather than plastic or felt. The difference is in its life: a felt tip of that length crushes the first time it meets concrete, whereas the metal one keeps its shape. Technical specifications ManufacturerPica Article number150/46 RangePica-Ink Deep Hole Marker Ink colourblack Line width2 mm Length152 mm TipExtended, adjustable, stainless steel InkPermanent, waterproof Quantity1 piece EAN4260056150012 Questions and Answers What colour is the marker? Black - both the ink and the body. Across the Pica-Ink 150 range the barrel colour follows the ink colour, so the variant is known on sight. What is the length? 152 mm, with a 2 mm line width. Why is the tip extended? An ordinary marker will not enter a hole, and even where it does the thick barrel covers the spot. The thin metal tip passes through and marks the bottom. What is the tip made of? Stainless steel, not plastic or felt. A felt tip of that length crushes the first time it meets concrete. Does it survive damp? Yes - the ink is permanent and waterproof. A mark made before the rain is there after it. Why a 2 mm line? The compromise between visibility and precision: finer is lost on concrete and sawn timber, thicker will not place an accurate point. How many in the pack? One. ..

Pica-Ink Deep Hole Marker, red, 150/40 Pica-Ink 150/40 is a marker for deep and hard-to-reach holes with red ink. Length 152 mm, line width 2 mm. The ink is permanent and waterproof. Supplied as 1 piece. The colour This article is red - both the ink and the body of the marker. Across the Pica-Ink 150 range the barrel colour follows the ink colour, so the variant is identified on sight rather than by testing it on the material: 150/40 is red, 150/46 black, 150/41 blue. The extended tip The tip is stainless steel, extended and adjustable. That is the whole point of the tool: an ordinary marker will not enter a hole, and even where it does, the thick barrel covers the spot so you cannot see where you are writing. The thin metal tip passes through the hole and marks the bottom. Where it is used On fixing through a finished surface: marking the structure behind a drilled hole, marking inside deep recesses, in sections, behind cladding and inside boxes. It also serves for marking in wet or oily conditions, where an ordinary pencil leaves nothing. Permanent and waterproof The ink is permanent - it does not smear on contact and does not disappear in damp. Working outdoors or in a cellar, that is essential: a mark made before the rain has to be there after it. 2 mm line width 2 mm is the compromise between visibility and precision. A finer line is lost on a rough substrate - concrete, brick, sawn timber; a thicker one will not place a point with usable accuracy. Ink or graphite The Pica deep-hole range comes in two kinds, and the choice between them is not a matter of taste. Ink markers such as this one write on smooth, wet and oily surfaces - metal, plastic, glazed tile - where graphite simply slides. The graphite versions suit dry timber, concrete and plasterboard, where the mark later has to be rubbed or sanded away. Ink is permanent: on a surface that will be seen, it can still show through a thin coat of paint. The metal tip The tip is stainless steel rather than plastic or felt. The difference is in its life: a felt tip of that length crushes the first time it meets concrete, whereas the metal one keeps its shape. Technical specifications ManufacturerPica Article number150/40 RangePica-Ink Deep Hole Marker Ink colourred Line width2 mm Length152 mm TipExtended, adjustable, stainless steel InkPermanent, waterproof Quantity1 piece EAN4260056150104 Questions and Answers What colour is the marker? Red - both the ink and the body. Across the Pica-Ink 150 range the barrel colour follows the ink colour, so the variant is known on sight. What is the length? 152 mm, with a 2 mm line width. Why is the tip extended? An ordinary marker will not enter a hole, and even where it does the thick barrel covers the spot. The thin metal tip passes through and marks the bottom. What is the tip made of? Stainless steel, not plastic or felt. A felt tip of that length crushes the first time it meets concrete. Does it survive damp? Yes - the ink is permanent and waterproof. A mark made before the rain is there after it. Why a 2 mm line? The compromise between visibility and precision: finer is lost on concrete and sawn timber, thicker will not place an accurate point. How many in the pack? One. ..

Pica Powder Deep Hole Spray Marker, up to 25 cm, Blister, 2020/SB Pica Powder 2020/SB is a spray marker for point marking in deep holes - down to 25 cm (10 inches). One cartridge gives 1,500 marks. The marker is refillable and works without propellant. It is supplied in a blister pack with a euro hanging hole - which is what the SB suffix means. Powder, not ink This marker does not write - it shoots powder. A thin metal tube goes into the hole, you press, and a puff of coloured powder leaves the tip and lands as a dot at the bottom. That is where the reach comes from: an ink marker depends on the length of its tip, whereas powder travels as far as the tube does. No propellant The pack states it plainly: Ohne Treibgas / Without aerosol. The marker is not an aerosol: there is no pressurised gas, which brings three consequences - it can be carried and stored without dangerous-goods restrictions, it is unaffected by temperature, and it does not lose pressure standing unused. 25 centimetres 25 cm is a depth no pencil or ink marker reaches. The typical job is marking the structure behind a drilled hole - through insulation, cladding, a suspended ceiling or a cavity between two skins. At those thicknesses the alternative is opening the cladding up to see where to drill. 1,500 marks One cartridge lasts 1,500 shots. For scale, that is the order of a whole job - the marker does not run out halfway through. When the powder is spent, the cartridge is replaced, not the whole marker. The clip The body carries a pocket clip. On a tool used several times an hour and put down in between, that is practical: the marker rides on the trouser pocket rather than in a bag at the other end of the site. The blister The SB suffix in the article number means a self-service blister pack - card with a clear shell and a euro hole for hanging. The product is the same as the loose 2020 version; only the packaging differs. Technical specifications ManufacturerPica Article number2020/SB RangePica Powder TypeDeep hole spray marker Marking depthup to 25 cm (10 inches) Marks1,500 per cartridge CartridgeRefillable PropellantNone - not an aerosol PackagingBlister with euro hole OriginGermany Questions and Answers How deep does it mark? Down to 25 cm (10 inches) - a depth neither pencil nor ink marker reaches. How does it work? It does not write but shoots powder. A thin metal tube enters the hole and a puff of coloured powder leaves the tip, landing as a dot at the bottom. Is it an aerosol? No. The pack states Without aerosol - there is no pressurised gas, so no restrictions on carriage or storage. How many marks does it make? 1,500 per cartridge. When the powder is spent, the cartridge is replaced, not the whole marker. How does it differ from article 2020? Only the packaging. The SB suffix means a self-service blister with a euro hole; the product inside is the same. What is it for? Marking the structure behind a drilled hole - through insulation, cladding, a suspended ceiling or a cavity between two skins. Does it have a clip? Yes - a pocket clip on the body, for a tool used several times an hour. ..

DeWALT 2-771 Can Filling PumpFeatures: The DeWALT 2-771 Box Filling Pump is made of high-grade aluminum with a hard anodized finish, ensuring maximum durability. It features a longer body and a longer handle compared to competing models, allowing for easy and convenient loading of the mixture. The pump is easy to assemble and disassemble, making cleaning a breeze. It is equipped with a built-in switch for added convenience and includes an extra-long DEWALT box-filling adapter (2-715). Technical Specifications:Made of premium aluminum with a hard anodized finishLonger body and longer handle compared to competing modelsEasy to assemble and disassembleIncluded:DEWALT / 2-715 / long box-filling adapter..

DeWALT DXTT-2-764 Flat Putty KnifeFeatures: The DeWALT DXTT-2-764 putty knife is constructed with an anodized aluminum body and stainless steel blades for high durability and strength. The flexible holder for the brass blades allows for precise application of the exact amount of joint compound, ensuring ease and comfort of use . The lid itself is spring-loaded, ensuring easy opening and closing for added convenience during cleaning. The box applies an even, consistent layer of joint compound to joints on walls and ceilings, making all edges and corners perfect. https://youtu.be/Rtqmrlh61VY..

DeWALT DXTT-2-765 Flat Putty KnifeFeatures: The DeWALT DXTT-2-765 putty knife is constructed with an anodized aluminum body and stainless steel blades for high durability and strength. The flexible holder for the brass blades allows for precise application of the exact amount of joint compound, ensuring ease and comfort of use . The lid itself is spring-loaded, ensuring easy opening and closing for added convenience during cleaning. The box applies an even, consistent layer of joint compound to joints on walls and ceilings, making all edges and corners perfect. https://youtu.be/Rtqmrlh61VY..

DeWALT DXTT-2-767 Flat Putty KnifeFeatures: The DeWALT DXTT-2-767 putty knife is constructed with an anodized aluminum body and stainless steel blades for high durability and strength. The flexible holder for the brass blades allows for precise application of the exact amount of joint compound, ensuring ease and comfort of use . The lid itself is spring-loaded, ensuring easy opening and closing for added convenience during cleaning. The box applies an even, consistent layer of joint compound to joints on walls and ceilings, making all edges and corners perfect. https://youtu.be/Rtqmrlh61VY..

Milwaukee 4932352332 Holesaw Drilling GuideThe Milwaukee Holesaw Drilling Guide is a specialized drilling guide designed for use with diamond drill bits and hole saws ranging from 19 to 68 mm. It ensures more precise starting and more stable tool guidance when drilling into hard and brittle building materials, including ceramic tiles.Application and ConvenienceThe accessory is suitable for clean and controlled hole drilling during installation work, such as routing pipes, cables, and other installations. The guide helps prevent the drill bit from slipping on smooth surfaces and reduces the risk of damaging the surface finish.Practical featuresThe model is designed to operate with a continuous water jet during drilling, which aids cooling, dust removal, and extends the life of diamond consumables. According to the available information, it attaches via vacuum to suitable surfaces, and the set includes 1 guide. The item number is 4932352332 and the EAN is 4002395369911.A suitable choice for precision work on tiles and other similar materials, where it is important that the hole be cut accurately and without unnecessary damage...

Rennsteig Hand Chisel, 250 mm, 350 250 0DescriptionThe Rennsteig 350 250 0 is a professional hand chisel designed for chiselling, shaping, and demolition work on masonry, concrete, stone, and other construction materials. With a 250 mm length, it offers excellent control and is suitable for both construction and renovation applications. Manufactured from high-quality hardened tool steel, the chisel provides excellent durability and long service life. The polished finish improves corrosion resistance and makes cleaning easier, while the robust construction ensures reliable performance under repeated hammer impact. The Rennsteig 350 250 0 is an ideal tool for professional builders, installers, and DIY users who require a durable hand chisel for everyday construction work.Technical Specifications Brand: Rennsteig Part Number: 350 250 0 Type: Hand chisel Length: 250 mm Material: Hardened tool steel Finish: Polished Suitable for: Masonry Concrete Stone Construction materials Package Includes 1 x Rennsteig Hand Chisel, 250 mm..

Dewalt DMF1550 Hand-Held Parquet Flooring Nailer The Dewalt DMF1550 is an extremely convenient and versatile time-saving hand tool for the quick and efficient installation of 25 mm thick flooring. It allows the user to tap the guide several times if the tongue is not aligned with the first tap. It can also be set to single-tap operation. Suitable for installing all types of hardwood and engineered flooring. Features also include an aluminum body for durability, rubber bumpers to protect the flooring from damage, and side impact guards. Comfortable rubber grip with a long reach. Comes with spacers, a graphite hammer, and a carrying case.Technical Specifications:Brand: Dewalt;Power source: Manual;Nail length: 38-50 mm;Capacity: 120 nails;Application: for hardwood, laminate, and wood flooring;Color: Yellow;Dimensions (LxWxH): 390 x 89 x 444 mm;Weight: 3.9 kgKit contents:Adjustable floor pads: 2 pcs.;Graphite anti-vibration hammer: 1 pc.;Storage and carrying case: 1 pc...

DeWALT DT7460-QZ Magnetic Hex Nut Driver Set, 3 PiecesDescriptionThe DeWALT DT7460-QZ is a 3-piece magnetic hex nut driver set designed for use with drills, cordless screwdrivers, and impact drivers. The set includes the three most commonly used sizes-8 mm, 10 mm, and 13 mm-making it ideal for fastening hex-head screws and nuts in construction, roofing, and maintenance applications. Each nut driver features a strong integrated magnet that securely holds the fastener for improved control and easier installation. The cleanable design allows metal shavings and debris to be removed quickly, helping maintain consistent performance and extending service life. The DeWALT DT7460-QZ is an excellent choice for professionals and DIY users looking for durable magnetic nut drivers for everyday fastening tasks.Technical Specifications Brand: DeWALT Model: DT7460-QZ Type: Magnetic hex nut driver set Number of pieces: 3 Sizes: 8 mm, 10 mm, 13 mm Shank: 1/4" Hex Magnetic: Yes Design: Cleanable Application: Driving hex-head screws and nuts Package Includes 1 x 8 mm magnetic nut driver 1 x 10 mm magnetic nut driver 1 x 13 mm magnetic nut driver..

Makita DTR180ZK Cordless Rebar Tying MachineDescription: The Makita DTR180ZK rebar tying machine is a highly efficient tool designed for construction professionals seeking speed and precision in their work. This model works with 0.8 mm rebar wire and can grip rebar rods with a diameter of up to 16 mm. It is ideal for tying up to two 16 mm rods or four 13 mm rods, making it versatile and effective in various construction applications. One of the main advantages of this model is its high performance, allowing up to 5,300 ties on a single charge of a 5.0 Ah Li-Ion battery. The machine is compatible with both 14.4 V and 18 V batteries, which increases its flexibility and convenience. In addition, the MAKITA DTR180ZK features six torque settings, allowing the machine to be adjusted to the specific requirements of the project. The easy reloading of the wire and the automatic operation mode significantly simplify the tying process, allowing for either single or continuous wire feeding. This feature is extremely useful when tying concrete mesh, floor heating pipes, PVC reinforcement pipes, and wire fences. The machine's lightweight and compact design ensures comfort and ease during prolonged use. Ships without a battery or charger! Technical specifications:Voltage: 14.4 - 18 VBattery type: Li-IonTying capacity: 0.8 mm (rebar)Maximum rebar grip: 35 mmLighting: noNoise: 78 dBDimensions (L x W x H): 305 x 85 x 255 mmWeight: 2.174 kgIncluded:1 x 2.5 mm hex key1 x Mounting bracket1 x Nylon brush1 x Plastic carrying casehttps://youtu.be/09QkjPjGRDQ?si=Z6VMW6yB8IFMlJ4B..