Crate Divider - Milwaukee PACKOUT, 4932500145

Milwaukee PACKOUT Crate Divider, 4932500145

4932500145 is the divider panel for the Milwaukee PACKOUT crate. It drops into the crate and splits it into two bays, so a loaded crate stops shuffling its contents on the way to the job. Milwaukee lists the part as Divider for PACKOUT™ Crate and supplies it one per pack.

What the panel solves

An open PACKOUT crate is one large volume. Carry it loaded and the long, heavy items settle on top of the small ones. The divider hooks over the crate rim and gives two separate bays - consumables on one side, the tool on the other - so you reach in for what you want instead of digging through the crate.

How it is built

The panel is a ribbed moulding rather than a solid sheet: the lattice takes the sideways load without adding weight to a crate lifted by hand. A hand-sized opening through the middle serves as a grip and as a window through the partition. The top edge is formed into teeth that sit over the lip of the crate, and the Milwaukee logo and the PACKOUT name are cast into the moulding itself.

What it fits

Milwaukee describes the part only as a divider for the PACKOUT crate and publishes no matching article numbers. In this shop the crate is listed under 4932471724; that pairing comes from trade listings, not from Milwaukee, so check your crate is the PACKOUT crate before ordering. This is not the divider for the drawers of the PACKOUT tool boxes - Milwaukee sells a separate part for those.

About the dimensions

Milwaukee publishes no dimensions for this article on any of its sites, although it gives them for the neighbouring dividers in the same range. No figures are quoted here. If an exact height matters, measure the inside of your own PACKOUT crate - the panel follows its profile.

Technical specifications

What is in the pack

• 1 x Milwaukee PACKOUT crate divider (Divider for PACKOUT™ Crate), 4932500145

Questions and Answers