Your Cart

Makita Advanced FitKnit P-84735 Work Gloves, Cut Level F / ANSI A7, size XL (10)

Makita Advanced FitKnit P-84735 Work Gloves, Cut Level F / ANSI A7, size XL (10)
Makita Advanced FitKnit P-84735 Work Gloves, Cut Level F / ANSI A7, size XL (10)
Makita Advanced FitKnit P-84735 Work Gloves, Cut Level F / ANSI A7, size XL (10)
Second hand New Label -14%
Makita Advanced FitKnit P-84735 Work Gloves, Cut Level F / ANSI A7, size XL (10)
Makita Advanced FitKnit P-84735 Work Gloves, Cut Level F / ANSI A7, size XL (10)
Makita Advanced FitKnit P-84735 Work Gloves, Cut Level F / ANSI A7, size XL (10)
Technical specifications:
  • Range: Advanced FitKnit
  • Size: XL (10)
  • EN 388: 4X42F
  • Cut (ISO 13997): F
  • ANSI cut: A7
  • Abrasion: 4
  • Tear: 4
  • Palm: nitrile
  • Touchscreen: yes
  • Machine washable: yes
  • Quantity: 1 pair
  • Article: P-84735
Categories: Work Gloves
Makita Advanced FitKnit P-84735 Work Gloves, Cut Level F / ANSI A7, size XL (10)
-14%
15.34€
17.90€
Ex Tax: 12.78€
  • Stock: In Stock
  • Brand: Makita
  • SKU:

    P-84735

Магазин Младост
5 бр.
Магазин Слатина
5 бр.
Склад
0 бр.
15 days right of return15 days right of return
Preview before paymentPreview before payment
Official distributorOfficial distributor
Secure online paymentSecure online payment

Makita Advanced FitKnit P-84735 Work Gloves, Cut Level F, size XL (10)

P-84735 are gloves with very high cut resistance – class F to ISO 13997, the top of the scale, and class A7 to ANSI. At the same time the knit is thin and sits close to the hand, so the fingers still feel the screw, the cable and the edge of the sheet. That combination is the whole point of the FitKnit range: protection you can actually work in.

What EN 388 says

The marking is 4X42F and reads as follows: 4 – abrasion resistance (very high); X – the rotating-blade test does not apply because the material blunts the blade; 4 – tear resistance (high); 2 – puncture resistance (medium); F – cut resistance to ISO 13997, the highest level. The X is not a weakness – it is precisely what is recorded for the most cut-resistant materials.

Nitrile palm

The palm is coated in nitrile – for grip on wet, oily and smooth surfaces. The coating is oil and liquid resistant, so the glove does not soak through when working with hydraulics, grease or coolant. The back stays uncoated knit, which breathes, so the hand does not cook over a full shift.

Touchscreen and washing

The fingertips are touchscreen compatible – a phone or a tool with a display can be used without taking the glove off. The gloves are machine washable, which matters more than it sounds with cut gloves: they get dirty fast, and a washed glove goes back on, whereas a dirty one gets thrown in a corner and the job gets done bare-handed.

Applications

Handling sheet metal and profiles, glass, sharp edges and cut-offs; installation, maintenance and warehouse work; dressing parts after the angle grinder. This article is size XL (10).

Technical specifications

Article P-84735
Range Makita Advanced FitKnit
Size XL (10)
EN 388:2016 + A1:2018 4X42F
Abrasion resistance 4 (very high)
Tear resistance 4 (high)
Puncture resistance 2 (medium)
Cut resistance (ISO 13997) F (very high)
ANSI cut level A7
ANSI puncture level 3
ANSI abrasion level 3
Palm coating Nitrile
Resistance Oil and liquids
Touchscreen use Yes
Machine washable Yes
CE category II
Quantity 1 pair
EAN 0088381716376

Questions and Answers

What does cut level F mean?

F is the highest level under ISO 13997, the test EN 388 uses for highly cut-resistant materials. On the American ANSI scale it corresponds to class A7. In practice the glove survives contact with a sharp sheet-metal edge or glass that an ordinary work glove would not.

Why is there an X on the label instead of a number?

The marking is 4X42F. An X in the second position means the rotating-blade test does not apply, because the material blunts the blade before the test completes. It is not an omission and not a weakness - X is exactly what is recorded for the most cut-resistant materials, and the real figure is read from the final letter, here F.

Will I still feel small parts in them?

Yes. The knit is thin and close-fitting, and the palm is coated in nitrile, which gives grip without bulk. The FitKnit range is built for exactly that - working with screws, cables and small parts, not only carrying weight.

Can I use a phone?

Yes, the fingertips are touchscreen compatible. A phone, tablet or measuring tool with a display can be operated without removing the glove.

Do they stand up to oils and liquids?

The nitrile palm coating is oil and liquid resistant, so the glove does not soak through when working with hydraulics, grease or coolant. The back stays uncoated knit so the hand can breathe.

Can they be washed?

Yes, the gloves are machine washable. With cut gloves that matters: they get dirty quickly, and a washed glove goes straight back into service.

Which size should I choose?

This article is size XL (10). The gloves have a close fit. If you are between two sizes, take the larger one - a glove that is too tight splits at the seams and tires the hand.

Write a review

Note: HTML is not translated!
Rating
Bad Good

The delivery of each order is carried out on the territory of the Republic of Bulgaria with the courier company "ECONT EXPRESS" Ltd. and can be to their office or to an address specified by the client. The products are in their original packaging from the manufacturer. Each order includes the option: Preview and test before payment.

Free shipping

Toolsbox.bg offers its customers free shipping for all orders with total value over 76 € and weight up to 20 kg, excluding oversized products (ladders, scaffolding, generators)., to the Econt office for Bulgaria specified by the client!

Delivery time

The delivery time, to the address or to the office of the courier company, is from 1 to 3 (three) working days from the date on which the order was received and confirmed. If certain circumstances require a delay in the specified delivery times, we will notify you in a timely manner.

Deliveries are made every weekday from 9:00 to 18:00 and until 13:00 on Saturday. No deliveries are made on Sundays or public holidays.

The customer can track their shipment with their waybill number at: https://www.econt.com/services/track-shipment

Delivery cost

For all orders up to €76, over 20 kg or containing an oversized product (ladders, scaffolding, generators), a delivery fee is charged to the courier company. The delivery cost is formed depending on the dimensions and weight of the shipment, as well as your location.

We wish you a pleasant shopping!
The Toolsbox.bg team