- Manufacturer: HiKOKI
- Article number: 753621
- Size: 2.8 x 50 mm
- Head: Full round head
- Shank: Ring shank
- Collation angle: 21°
- Finish: Electro-galvanised
- Pack quantity: 3000 pieces
- Compatibility: SN21 type, 21° nailers
- Stock: In Stock
- Brand: Hikoki
- SKU:
753621
HiKOKI Framing Nails 2.8 x 50 mm, 21°, Ring Shank, 3000 Pieces, 753621
HiKOKI article number 753621 are framing nails with a full round head, sized 2.8 x 50 mm and collated in 21° strips. The shank is ringed, the finish electro-galvanised, and the pack contains 3000 pieces.
The 21° angle decides compatibility
The first thing to check when ordering nailer consumables is not the length but the collation angle. Nails are gathered at a fixed angle - 21°, 28°, 30° or 34° - and each nailer's magazine accepts only its own. These are 21°, meaning machines of the SN21 type, including the HiKOKI NR1890 and equivalent models from other manufacturers.
Ring shank - when it matters
The shank carries rings rather than a smooth surface. The difference is in withdrawal resistance: a smooth nail is held only by friction against the timber, which weakens as the wood dries, whereas the rings grip the fibres mechanically. On cladding, floor joists and anything subject to seasonal movement in the timber, that is the difference between a joint that holds and one that has backed out a few millimetres after two years. The flip side: a ring-shank nail is practically impossible to withdraw without tearing the wood, so for temporary structures and formwork a smooth shank is the better choice.
Electro-galvanised finish
The nails are electro-galvanised - a thin electroplated zinc layer. It provides corrosion protection in interior and sheltered conditions and prevents surface rust and staining of the timber. For permanent exposure to the weather - fencing, decking, external cladding - a hot-dip galvanised nail is required, where the coating is many times thicker.
2.8 x 50 mm
At 2.8 mm diameter and 50 mm long, these nails suit cladding, battens, floorboards, pallets and crates - work where a 90 mm framing nail would pass straight through the piece. The nailing rule still applies: the nail should penetrate the lower member by at least two and a half times its own diameter.
Full round head
The head is complete rather than clipped. It has more bearing area and higher withdrawal resistance, and building codes in a number of countries require exactly this type for load-bearing timber structures. 21° strips collate full-head nails specifically - that is why the angle is shallower, so the heads do not overlap.
Safety
A nailer fires metal with considerable energy. Eye protection is essential, including for anyone nearby. Never point the tool at a person, even when empty. A nail striking a knot or another nail can deflect.
Technical specifications
| Manufacturer | HiKOKI |
| Article number | 753621 |
| Type | Framing nails for nailers |
| Diameter | 2.8 mm |
| Length | 50 mm |
| Head | Full round head |
| Shank | Ring shank |
| Collation angle | 21° |
| Collation | Plastic strip |
| Finish | Electro-galvanised |
| Pack quantity | 3000 pieces |
| Compatibility | 21° strip nailers, SN21 type |
Questions and Answers
Which nailers do they fit?
What does a ring shank give you?
When is a smooth shank the better choice?
Are they suitable for outdoor use?
What work does 2.8 x 50 mm suit?
How many nails are in the pack?
What precautions are needed?
The delivery of each order is carried out on the territory of the Republic of Bulgaria with the courier company "ECONT EXPRESS" Ltd. and can be to their office or to an address specified by the client. The products are in their original packaging from the manufacturer. Each order includes the option: Preview and test before payment.
Free shipping
Toolsbox.bg offers its customers free shipping for all orders with total value over 76 € and weight up to 20 kg, excluding oversized products (ladders, scaffolding, generators)., to the Econt office for Bulgaria specified by the client!
Delivery time
The delivery time, to the address or to the office of the courier company, is from 1 to 3 (three) working days from the date on which the order was received and confirmed. If certain circumstances require a delay in the specified delivery times, we will notify you in a timely manner.
Deliveries are made every weekday from 9:00 to 18:00 and until 13:00 on Saturday. No deliveries are made on Sundays or public holidays.
The customer can track their shipment with their waybill number at: https://www.econt.com/services/track-shipment
Delivery cost
For all orders up to €76, over 20 kg or containing an oversized product (ladders, scaffolding, generators), a delivery fee is charged to the courier company. The delivery cost is formed depending on the dimensions and weight of the shipment, as well as your location.
We wish you a pleasant shopping!
The Toolsbox.bg team