Your Cart

6-Point Socket - Expert by Facom, 27 mm, 1/2 inch Drive, E117254

6-Point Socket - Expert by Facom, 27 mm, 1/2 inch Drive, E117254
Second hand Label -13%
Technical specifications:
  • Manufacturer: Expert by Facom
  • Article number: E117254
  • Size: 27 mm
  • Drive: 1/2 inch
  • Profile: OGV
  • Points: 6
  • Material: Chrome vanadium steel
Categories: Hand tools , Inserts
6-Point Socket - Expert by Facom, 27 mm, 1/2 inch Drive, E117254
-13%
5.15€
5.90€
Ex Tax: 4.29€
  • Stock: In Stock
  • Brand: Expert
  • SKU:

    E117254

Магазин Младост
1 бр.
Магазин Слатина
0 бр.
Склад
0 бр.
15 days right of return15 days right of return
Preview before paymentPreview before payment
Official distributorOfficial distributor
Secure online paymentSecure online payment

Expert by Facom 6-Point Socket 27 mm, 1/2 inch Drive, E117254

Expert by Facom E117254 is a 27 mm 6-point socket on a 1/2 inch square drive, in the short (standard) length. It is made from chrome vanadium steel with a high chrome finish and the OGV profile.

The OGV profile

OGV is the geometry that separates this socket from a cheap one. In an ordinary socket the force passes through the corners of the nut - where the pressure is concentrated and where the rounding begins. The OGV profile transfers torque onto the flats of the hexagon, which offer far more bearing area. In practice that means an old, rusted or already damaged nut comes undone instead of spinning.

Six points, not twelve

A 6-point socket seats on the full flat of the nut, whereas a 12-point bears on only half its teeth. For heavy loads and seized fasteners six points are the right choice; twelve suit tight spaces where the socket has to engage through a smaller angle.

1/2 inch drive

1/2 inch is the drive for medium and heavy work - ratchets, extensions and breaker bars in that class. It is not intended for impact wrenches: impact work calls for impact sockets in a tougher steel, usually black.

Material and finish

Chrome vanadium steel provides the toughness, and the high chrome finish keeps corrosion off and lets oil be wiped away with a cloth. The smooth surface has a second effect: it does not carry dirt into the nut's thread.

Why a nut spins

A rounded nut is almost always the result of two things at once: a socket with play, and force applied at an angle. The play comes either from a worn socket or from the wrong size - most often an imperial socket on a metric nut, where the difference is under a millimetre, the socket goes on, but it bears only on the corners. The angle comes from working without an extension in a tight space. The rule that saves the most nuts is simple: seat the socket fully, hold it on the axis, and where seizing is suspected, strike the socket with a hammer to crack the rust rather than raising the torque.

Standards

The socket conforms to ISO 2725-1, DIN 3124, ISO 1174-1, ISO 1711-1 and ISO 691 - meaning the drive and hexagon dimensions follow a norm and the socket fits ratchets of any brand.

Technical specifications

Manufacturer Expert by Facom
Article number E117254
Type 6-point socket, short
Size 27 mm
Drive 1/2 inch
Profile OGV
Material Chrome vanadium steel
Finish High chrome
Standards ISO 2725-1, DIN 3124, ISO 1174-1, ISO 1711-1, ISO 691
Application Manual use

Questions and Answers

What size is it?

27 mm hexagon, on a 1/2 inch square drive.

What is the OGV profile?

A geometry that transfers force onto the flats of the nut rather than the corners. An old or already damaged nut therefore comes undone instead of spinning.

Six points or twelve?

Six. A six-point socket seats on the full flat and is the right choice under heavy load. Twelve points suit tight spaces.

Can it be used on an impact wrench?

No. This is a socket for manual use. Impact work calls for impact sockets in a tougher steel, usually black.

What steel is it?

Chrome vanadium, with a high chrome finish against corrosion.

Will it fit another brand's ratchet?

Yes - the drive and hexagon follow ISO 2725-1 and DIN 3124.

Is it short or long?

Short (standard). The long sockets in the same range carry separate part numbers.

Write a review

Note: HTML is not translated!
Rating
Bad Good

The delivery of each order is carried out on the territory of the Republic of Bulgaria with the courier company "ECONT EXPRESS" Ltd. and can be to their office or to an address specified by the client. The products are in their original packaging from the manufacturer. Each order includes the option: Preview and test before payment.

Free shipping

Toolsbox.bg offers its customers free shipping for all orders with total value over 76 € and weight up to 20 kg, excluding oversized products (ladders, scaffolding, generators)., to the Econt office for Bulgaria specified by the client!

Delivery time

The delivery time, to the address or to the office of the courier company, is from 1 to 3 (three) working days from the date on which the order was received and confirmed. If certain circumstances require a delay in the specified delivery times, we will notify you in a timely manner.

Deliveries are made every weekday from 9:00 to 18:00 and until 13:00 on Saturday. No deliveries are made on Sundays or public holidays.

The customer can track their shipment with their waybill number at: https://www.econt.com/services/track-shipment

Delivery cost

For all orders up to €76, over 20 kg or containing an oversized product (ladders, scaffolding, generators), a delivery fee is charged to the courier company. The delivery cost is formed depending on the dimensions and weight of the shipment, as well as your location.

We wish you a pleasant shopping!
The Toolsbox.bg team