Filter
Your Cart

Diamond discs - Page 3

Brand: Dewalt Stock: In Stock
Diamond blade for wet cutting. For wet and dry cutting of tiles. FEATURES Continuously sintered blade edge for a fine finish on all tile materials. Manufacturer: DeWALTStatus: In stockOuter diameter: 110.00 mm Inner diameter: 20.00 mm Segment height: 5.0 mm Segment thickness: 1.6 mm Model: DT3714-QZ Application: for wet cutting of granite, marble, and ceramics..
-16%
8.69€ 10.33€
Ex Tax:7.24€
Add to Cart
Brand: Bosch Stock: In Stock
Disc Outer Diameter: 230 mm Inner Diameter: 22.23 mm Type of material to be processed: Building materials Segment height: 10 mm Segment thickness: 2 mm Part number for 1 pc: 2608615065 Item number for 10 pcs: 2608615066 / 2 608 615 066 / 2.608.615.066 Standard for Universal The cost-effective diamond blade for dry cutting, providing a solution to cutting challenges in all construction materials. Sintered diamond cutting segments. For use with an angle grinder...
-29%
20.96€ 29.46€
Ex Tax:17.47€
Add to Cart
Brand: Makita Stock: In Stock
Makita D-77263 Diamond BladeDescription: The Makita diamond blade for dry cutting is made of high-quality material and is suitable for angle grinders. This high-speed cutting disc is designed for cutting ceramics, terracotta, and tile and has a diameter of 76 mm . Thanks to the optimized diamond matrix, cutting is performed without chipping, sparks, or burn marks. Technical specifications:Diameter: 76 mmInner diameter: 10 mmBlade thickness: 1.6 mmMaximum speed: 20,150 rpmQuantity per package: 1 pc..
-25%
5.37€ 7.16€
Ex Tax:4.48€
Add to Cart
Brand: Rubi Stock: In Stock
Brand: Rubi Model: 62975 Outer diameter, mm: 100 mm Inner diameter, mm: 18 mm Dry polishing disc with hook-and-loop backing for marble, granite, stone, composite materials, and concrete surfaces. Grit range: P50-100 for pre-polishing when a coarse grit is required. P1500 and 3000 are the finest grits and are suitable for finishing work. P200, 400, and 800 for medium sanding. Recommended for use with a speed-adjustable machine. A backing pad for the angle grinder is required (Ref. 62986)...
-7%
8.08€ 8.69€
Ex Tax:6.73€
Add to Cart
Brand: Rubi Stock: In Stock
Brand: Rubi Model: 62972 Outer diameter, mm: 100 mm Inner diameter, mm: 18 mm Dry polishing disc with Velcro for marble, granite, stone, composite materials, and concrete surfaces. Grit range: P50-100 for pre-polishing when a coarse grit is required. P200, 400, and 800 for medium sanding. P1500 and 3000 are the finest grits and are suitable for finishing work. Recommended for use with a speed-adjustable machine. A backing pad for the flex is required (Ref. 62986). ..
-6%
8.52€ 9.02€
Ex Tax:7.10€
Add to Cart
Brand: Rubi Stock: In Stock
Brand: Rubi Model: 62973 Outer diameter, mm: 100 mm Inner diameter, mm: 18 mm Dry polishing disc with Velcro for marble, granite, stone, composite materials, and concrete surfaces. Recommended for use with a speed-adjustable machine. P1500 and 3000 are the finest grits and are suitable for finishing work. Range by grit size: P50-100 for pre-polishing when a coarse grit is required. P200, 400, and 800 for medium sanding. A backing pad for the angle grinder is required (Ref. 62986)...
-5%
8.22€ 8.69€
Ex Tax:6.85€
Add to Cart
Brand: Rubi Stock: In Stock
Brand: Rubi Model: 62970 Outer diameter, mm: 100 mm Inner diameter, mm: 18 mm Dry polishing disc with Velcro for marble, granite, stone, composite materials, and concrete surfaces. Grit range: P50-100 for pre-polishing when a coarse grit is required. P200, 400, and 800 for medium sanding. P1500 and 3000 are the finest grits and are suitable for finishing work. Recommended for use with a speed-adjustable machine. A backing pad for the flex is required (Ref. 62986). ..
-8%
8.00€ 8.69€
Ex Tax:6.67€
Add to Cart
Brand: Rubi Stock: In Stock
Brand: Rubi Model: 62974 Outer diameter, mm: 100 mm Inner diameter, mm: 18 mm Dry polishing pad with hook-and-loop backing for marble, granite, stone, composite materials, and concrete surfaces.Recommended for use with a speed-adjustable machine. Range by grit size: P50-100 for pre-polishing when a coarse grit is required. P200, 400, and 800 for medium sanding. P1500 and 3000 are the finest grits and are suitable for finishing work. A backing pad for the flex is required (Ref. 62986)...
-8%
7.99€ 8.69€
Ex Tax:6.66€
Add to Cart
Brand: Dewalt Stock: In Stock
DeWALT DT3715-QZ Diamond Blade for Dry and Wet CuttingDescription: The DeWALT DT3715-QZ diamond circular saw blade for dry and wet cutting is specially designed with a continuously sintered blade edge for a fine finish on all tile materials. It is suitable for the DeWALT DWC410 hand-held circular saw for dry and wet cutting. Perfect results when cutting porcelain, marble, and granite tiles. Technical Specifications:Diameter: 110 mm / 20 mmSegment height: 8 mmSegment width: 1.6 mmWeight: 0.04 kg..
-10%
29.77€ 33.08€
Ex Tax:24.81€
Add to Cart
Brand: Rubi Stock: In Stock
Brand: Rubi Model: 30949 Outer diameter, mm: 250 mm Inner diameter, mm: 25.40 mm Thickness, mm: 2.20 mm CEV-250 SUPERPRO - For wet cutting of ceramic, earthenware, porcelain, etc. Maximum cutting performance with minimal vibration. For use with a stationary cutting machine. Exceptional finish. ..
-3%
59.78€ 61.58€
Ex Tax:49.82€
Add to Cart
Brand: Rubi Stock: In Stock
Brand: Rubi Model: 30883 Outer diameter, mm: 125 mm Inner diameter, mm: 22.23 mm Segment height: 7 mm Segment thickness: 1.6 mm Abrasive material type: diamond powder CSV SUPERPRO is designed for dry cutting of ceramics, earthenware, porcelain, etc. Maximum cutting performance with minimal vibration. For use with an electric angle grinder. Exceptional finish...
-6%
20.12€ 21.43€
Ex Tax:16.77€
Add to Cart
Brand: Bosch Stock: In Stock
Bosch 2608901193 Multi-Purpose DiscDescription: The Bosch Carbide Multi Wheel 2608901193 angle grinder disc features a steel body and a carbide edge, ensuring high durability and efficiency. It features the X-LOCK keyless system, which allows for easy wheel changes without the need for additional tools-just a simple click. It is suitable for cutting a wide range of materials, from concrete, stone, and metal to wood and plastic. Technical specifications:Brand: Bosch;Material: steel, carbideDiameter: 125 mm;Bore diameter: 22.23 mm;Application: concrete, stone, metal, wood, plastic;Quantity per package: 1 pc..
-29%
15.95€ 22.34€
Ex Tax:13.29€
Add to Cart
Stock: In Stock
Hollzein Universal HM Circular Saw Blade, 400 x 30 mm, 120TDescriptionThe Hollzein Universal HM Circular Saw Blade is designed for precise cutting across a wide range of materials. This version features a 400 mm blade diameter, 30 mm bore, and 120 teeth, with a listed blade body thickness of 3 mm and tooth width of 3.6 mm. Part of the Multi Material range, the blade is suitable for cutting aluminium, PVC, wood, wood-based panels, plasterboard, epoxy resins, copper, metals, and alloys. Its combination of trapezoidal and flat teeth with a negative rake angle is designed to provide controlled, high-quality cutting.Technical Specifications Brand: Hollzein Series: Multi Material Type: Universal circular saw blade Blade diameter: 400 mm Bore diameter: 30 mm Blade body thickness: 3 mm Tooth width: 3.6 mm Number of teeth: 120T Teeth: HM carbide tipped Tooth geometry: Trapezoidal and flat teeth Applications: Aluminium, PVC, wood, wood-based panels, plasterboard, epoxy resin, copper, metals and alloys Package Includes 1 x Hollzein Universal HM Circular Saw Blade, 400 x 30 mm, 120T..
190.00€
Ex Tax:158.33€
Add to Cart
Brand: Husqvarna Stock: In Stock
Husqvarna 579 81 64-20 Diamond Blade for Dry and Wet CuttingDescription: The Husqvarna Construction Tacti-Cut S50 diamond blade is a high-quality, versatile cutting blade suitable for dry and wet cutting. With a diameter of 350 mm, a 25.4 mm bore, and a 10 mm segment height, it ensures efficient performance and a long service life. It is suitable for cutting concrete, reinforced concrete, bricks, tiles, and wrought iron, and can also be used on granite, marble, natural stone, and abrasive materials. The blade offers reliability, good performance, and a clean cut, making it an excellent choice for professional construction and renovation work. Technical specifications:Diameter: 350 mmBore: 25.4 mmSegment height: 10 mmStandard: EN13236Weight: 2 kg..
-23%
78.00€ 101.75€
Ex Tax:65.00€
Add to Cart
Stock: In Stock
METABO 616357000 Stainless Steel DiscDescription: The METABO 616357000 stainless steel blade is designed for working with steel and stainless steel. With low iron, sulfur, and chlorine content (Fe + S + Cl ≤ 0.1% ), this blade ensures high cutting performance while providing a long tool life. The blade demonstrates excellent cutting efficiency with consistent cut quality. Its low material consumption contributes to energy savings and reduces machine load. With its high performance and reliability, this blade is ideal for a variety of applications in steel and stainless steel processing. Technical specifications:Blade diameter: 125 mmThickness: 1 mmBore size: 22.23 mmIntended for: steel, stainless steelQuantity per package: 10 pcs..
-37%
8.39€ 13.29€
Ex Tax:6.99€
Add to Cart
Stock: In Stock
METABO 616358000 Stainless Steel DiscDescription: The METABO SP stainless steel blade is designed for processing steel and stainless steel. With low iron, sulfur, and chlorine content (Fe + S + Cl ≤ 0.1% ), this blade ensures high cutting performance while providing a long tool life. The blade demonstrates excellent cutting efficiency with consistent cut quality. Its low material consumption contributes to energy savings and reduces machine load. With its high performance and reliability, this blade is ideal for a variety of applications in steel and stainless steel processing. Technical specifications:Blade diameter: 115 mmThickness: 1 mmBore size: 22.23 mmType: SPDesigned for: steel, stainless steelQuantity per package: 10 pcs..
-18%
9.20€ 11.20€
Ex Tax:7.67€
Add to Cart
Brand: Makita Stock: In Stock
Makita B-22034 Diamond Blade, 110 x 20 mm, Wet Cutting, Continuous Rim Makita B-22034 is a diamond blade 110 mm in diameter with a 20 mm bore and a continuous rim. Thickness is 2.0 mm, segment height 5 mm, and maximum speed reaches 13,880 rpm (80 m/s). The blade is for wet cutting only and conforms to EN 13236. Continuous rim - for a clean cut The cutting rim is continuous rather than segmented, and that difference defines what the blade is for. A segmented blade has gaps between the segments that let cooling air in - it cuts fast but leaves a chipped edge. A continuous rim has no gaps, so it cuts more slowly but produces a smooth cut with no chipping. On granite, marble and ceramic that is decisive: the cut face stays visible, and a chipped edge cannot be repaired. Wet cutting only - and why that is not advice The blade is marked for wet cutting, and that is a requirement, not a preference. A continuous rim has no gaps for cooling air - cut dry and the rim overheats within seconds, the bond softens and the diamond grit tears out. The blade is destroyed permanently. Water performs two jobs at once here: it cools and it flushes the slurry out of the cut. Materials The blade cuts granite, marble and concrete - hard mineral materials where cut quality matters. Typical applications are cutting natural stone slabs, shaping sills and trim, trimming porcelain tile and wet work on a tile saw. Maximum speed The 13,880 rpm limit corresponds to a rim speed of 80 m/s - the figure the blade body is engineered for. This is a safety limit rather than a performance recommendation: above it, centrifugal force exceeds what the blade is designed to take. Check your machine's speed before fitting. 20 mm bore The bore is 20 mm - the standard for 110 mm wet tile-cutting machines such as the Makita 4101RH. A machine with a different spindle diameter needs a reducing ring, not a blade forced onto it: a blade mounted off-centre wobbles, cuts at an angle and destroys itself. Safety Work with eye protection, gloves and hearing protection - the symbols for these are printed on the blade itself. Wet cutting stone releases silica dust the moment the water stops: watch the water feed continuously. Never cut dry "just briefly" - on a continuous rim even a short dry cut damages the blade permanently. Technical specifications ManufacturerMakita Article numberB-22034 TypeContinuous rim diamond blade Diameter110 mm Bore20 mm Thickness2.0 mm Segment height5 mm Maximum speed13,880 rpm (80 m/s) Cutting modeWet only MaterialsGranite, marble, concrete StandardEN 13236 OriginJapan Questions and Answers Can I cut dry "just briefly"? No. A continuous rim has no gaps for cooling air - cut dry and the rim overheats within seconds, the bond softens and the diamond grit tears out. The blade is ruined on the first attempt. How does it differ from a segmented blade? A segmented blade has gaps for cooling air - it cuts fast but leaves a chipped edge. A continuous rim cuts more slowly but gives a smooth, chip-free cut. On stone and ceramic the cut face stays visible and cannot be repaired. Which materials does it cut? Granite, marble and concrete - hard mineral materials where cut quality matters. Typical uses are natural stone slabs, sills, porcelain tile and wet work on a tile saw. Will it fit my machine? The blade is 110 mm with a 20 mm bore - the standard for wet tile saws in this class. A different spindle diameter needs a reducing ring. Confirm your machine does not exceed 13,880 rpm. What does 80 m/s mean? The maximum rim speed the blade body is engineered for - at 110 mm diameter that corresponds to 13,880 rpm. It is a safety limit: above it, centrifugal force exceeds the design. What does the water actually do? Two things at once: it cools the rim and flushes the slurry out of the cut. If the water stops, temperature spikes immediately - which is why the feed is watched continuously rather than checked occasionally. What protective equipment is needed? Eye protection, gloves and hearing protection - the symbols are printed on the blade itself. Cutting stone releases silica dust the moment the water stops, so the water feed is a safety measure as much as a technical one. ..
-26%
29.10€ 39.27€
Ex Tax:24.25€
Add to Cart
Brand: Makita Stock: In Stock
Makita D-80640 Diamond Cup Wheel for Concrete, Turbo, Fine, 125x22.23 mm Makita D-80640 is a diamond cup wheel with a diameter of 125 mm and a 22.23 mm bore. In the Makita catalogue the type is listed as an offset diamond wheel - an offset, cup-shaped body with a continuous corrugated Turbo diamond band wrapped around its rim. This is not a cutting disc: the cup removes material across an area - it levels poured concrete slabs and takes off formwork residue, cement, tile adhesive and paint. Of the three grits Makita offers for this type of cup wheel, the D-80640 is the finest: the ROUGH - STANDARD - FINE scale on the box is marked at FINE. It is the wheel you reach for when the surface behind it will not be worked again, but rendered, tiled or painted straight away. What it is for Its job is levelling and cleaning up concrete and stone, not bulk removal. Typical tasks: smoothing poured concrete slabs and steps after the formwork comes off - seams, steps and overspill; taking off old cement, screed and tile adhesive from a floor or a wall; cleaning up concrete walls and columns before filler or waterproofing; working stone, brickwork and kerbs - chamfers, levelling to height; fine smoothing in corners and up to a wall. Makita describes the shape as very stable, highly efficient and also suitable for corners. The stability comes from the wide bearing area: the cup sits flat instead of skipping the way a disc does when it stands on its thin rim alone. The Turbo band - continuous and corrugated The diamond band is continuous and corrugated (Turboband) - it is not made up of separate segments with gaps between them. The difference shows in two places. First, the finish is more even: on a segmented cup every segment leaves its own arc and the surface comes out ribbed, whereas a continuous band sweeps without a break. Second, vibration is lower, because the contact between grit and concrete never breaks. The waves do the job the slots do on a segmented cup: they clear the dust and let air in, so the wheel does not choke and overheat. The body carries eight holes that feed air from the inside. Makita gives the band dimensions as 15 mm high and 4.5 mm thick. That is the life of the wheel: it keeps working until the band is worn down to the body. Why the machine needs SJS or a soft start This is the one real restriction on this article, and Makita states it explicitly. The wheel is heavy - 505 g with its packaging, while an ordinary 125 mm cutting disc weighs several times less. Every time the machine starts, that mass has to be accelerated to working speed in a fraction of a second, and the shock goes straight into the gearbox. That is why the manufacturer asks for an angle grinder with SJS, SJS II or a soft start. SJS (Super Joint System) is a mechanical clutch in the head of the machine that absorbs the shock; a soft start does the same electronically by running the motor up gradually. The SJS symbol is printed on the wheel's packaging as well. On a plain angle grinder with neither, the cup will still spin - but the gearbox pays for every start. Which machines it fits The 22.23 mm bore is standard for 125 mm angle grinders, so the wheel fits without an adapter. Makita lists the article for: 125 mm concrete planers - PC5001C and PC5010C; corded 125 mm angle grinders - 9565CR, 9565CVR, 9565HR, GA5021C, GA5040C01, GA5041C01, GA5090X01 through GA5095X01; cordless LXT 18 V - the DGA504 to DGA518 range; cordless XGT 40 V - GA005G, GA013G, GA016G, GA023G, GA026G, GA029G, GA032G, GA050G. The maximum speed is 12,250 min-1 and the maximum peripheral speed is 80 m/s. The speed is stamped on the hub and printed on the box; the peripheral speed, on the hub only. The machine's speed must not exceed them; standard 125 mm angle grinders stay below that limit. The materials Makita rates it for Makita publishes a rating on its own material scale. For the D-80640 it reads: Top rating (AA) - concrete, concrete block, kerbs and paving elements, cemented tile; Rating A - hard concrete, granite and gneiss; marble and unglazed tile; brick, aggregate block and clay tile; asphalt. In short: ordinary concrete is its home ground; on the other materials it works, without that being its strength. It is not intended for metal, wood or plastic. Technical specifications ManufacturerMakita Article numberD-80640 EAN0197050361639 Typediamond cup wheel (offset diamond wheel) Grit / gradeFINE (from the ROUGH - STANDARD - FINE scale) Diameter125 mm (5") Bore22.23 mm (7/8") Band typecontinuous corrugated, Turbo Band height15 mm Band thickness4.5 mm Body shapeoffset, cup-shaped (OFFSET), with 8 air holes Maximum speed12,250 min-1 Maximum peripheral speed80 m/s Machine required125 mm angle grinder with SJS, SJS II or soft start; 125 mm concrete planer StandardEN 13236 Weight including packaging505 g Quantity per pack1 piece Or..
-16%
29.99€ 35.89€
Ex Tax:24.99€
Add to Cart
Brand: Makita Stock: In Stock
Technical specifications: Blade thickness: 2.2 mm Disc diameter: 125 mm Bore size: 22.23 mm Segment height: 7 mm Maximum speed: 12,250 rpm For materials: Concrete Description: Full ring segment Quantity (pcs./set): 1 Not for wet cutting!..
-16%
8.00€ 9.51€
Ex Tax:6.67€
Add to Cart
Brand: Metabo Stock: In Stock
METABO 628555000 Tile Cutting DiscDescription: The METABO SP-T diamond tile cutting disc features a closed-edge design that ensures aggressive and fast cutting, combined with high performance and long tool life. This disc is ideal for use on various materials such as tiles and natural stone. It delivers a clean cut without damaging the material. Technical specifications:Blade diameter: 115 mmTooth dimensions: 1.5 x 7 mmBore size: 22.23 mmType: SP-T..
-33%
5.62€ 8.35€
Ex Tax:4.68€
Add to Cart
Showing 41 to 60 of 164 (9 Pages)
Product Filter